飄ぺ風
【宁可因梦想而忙碌,不要因忙碌而失去梦想】

如何删除 EMC存储认到的鬼盘LUNZ disk


# lspv
hdisk0          00c3d2b5101a064c                    rootvg          active
hdisk1          00c3d2b5dee3325a                    rootvg          active
hdisk2          none                                None
hdisk3          none                                None
hdisk4          none                                None
hdisk5          none                                None
hdiskpower0     00c3d2a5dc20980a                    nxtvg
# lsdev -Cc disk
hdisk0      Available 00-08-00 SAS Disk Drive
hdisk1      Available 00-08-00 SAS Disk Drive
hdisk2      Available 05-00-02 EMC CLARiiON FCP LUNZ Disk
hdisk3      Available 05-00-02 EMC CLARiiON FCP RAID 5 Disk
hdisk4      Available 07-00-02 EMC CLARiiON FCP LUNZ Disk
hdisk5      Available 07-00-02 EMC CLARiiON FCP RAID 5 Disk
hdiskpower0 Available 07-00-02 PowerPath Device

rmdev 删除之后 cfgmgr就又出现了。

系统中报磁盘操作错误

B6267342   0407134010 P H hdisk4         DISK OPERATION ERROR
B6267342   0407133910 P H hdisk4         DISK OPERATION ERROR
B6267342   0407132910 P H hdisk3         DISK OPERATION ERROR
B6267342   0407132910 P H hdisk3         DISK OPERATION ERROR
B6267342   0407132910 P H hdisk2         DISK OPERATION ERROR
B6267342   0407132910 P H hdisk2         DISK OPERATION ERROR
B6267342   0407132910 P H hdisk3         DISK OPERATION ERROR
B6267342   0407132910 P H hdisk3         DISK OPERATION ERROR

# lslpp -l | grep power
  EMCpower.base              5.3.0.0  COMMITTED  PowerPath Base Driver and
  EMCpower.consistency_grp   5.3.0.0  COMMITTED  PowerPath Consistency Group
  EMCpower.encryption        5.3.0.0  COMMITTED  PowerPath Encryption with RSA
  EMCpower.migration_enabler
  EMCpower.mpx               5.3.0.0  COMMITTED  PowerPath Multi_Pathing



# oslevel -s
5300-11-00-0000

解决方法一:

进入Navisphere,点击Storage Groups -> 选择你出现鬼盘的Group -> Hosts ->选择出现鬼盘的host -> 点击鼠标右键 ->  Connectivity Status  

-> 是不是会看到一个“~management”组

如果看到,选择WWN地址,然后点击reconnect按钮,会把这个WWN地址注册到你选择的Group里。

然后再运行下列步骤删除鬼盘:

powermt remove dev=all
lsdev -Ct power -F name | xargs -n1 rmdev -dl
lsdev -Ct CLAR_* -F name | xargs -n1 rmdev -dl
/usr/lpp/EMC/CLARiiON/bin/emc_cfgmgr
powermt config

处理“~management”组,方法二(待验证,慎用):

 

go to storage group properties, host tap, enter enginneerit mode (CNTRL+SIFT+F12 ..password "messner"), You will see "Advanced botton". Select it and then look at your host, if there are paths that are not selected go ahead and select them and hit OK.

 

参考资料:

https://community.emc.com/message/530614

https://community.emc.com/docs/DOC-23031

 

posted on 2017-08-16 22:55  飄ぺ風  阅读(1822)  评论(0编辑  收藏  举报