通过SIMPLE_DEV_PM_OPS定义suspend和resume函数【转】
本文转载自:https://blog.csdn.net/tiantao2012/article/details/77851782
通过SIMPLE_DEV_PM_OPS 定义这个驱动的suspend和resume函数,如果没有定义CONFIG_PM_SLEEP的时候就将CONFIG_PM_SLEEP定义为空函数,这样可以避免build error
static SIMPLE_DEV_PM_OPS(asic3_led_pm_ops, asic3_led_suspend, asic3_led_resume);
static struct platform_driver asic3_led_driver = {
.probe = asic3_led_probe,
.remove = asic3_led_remove,
.driver = {
.name = "leds-asic3",
.pm = &asic3_led_pm_ops,
},
};
SIMPLE_DEV_PM_OPS 定义如下:
#define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \
const struct dev_pm_ops name = { \
SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
}
如果定义CONFIG_PM_SLEEP的话,就给suspend和resume的函数指针赋值
#ifdef CONFIG_PM_SLEEP
#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
.suspend = suspend_fn, \
.resume = resume_fn, \
.freeze = suspend_fn, \
.thaw = resume_fn, \
.poweroff = suspend_fn, \
.restore = resume_fn,
#else
#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
#endif
可以看到如果没有定义CONFIG_PM_SLEEP的话,SIMPLE_DEV_PM_OPS 就相当于空函数
#define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \
const struct dev_pm_ops name = { \
---------------------
作者:tiantao2012
来源:CSDN
原文:https://blog.csdn.net/tiantao2012/article/details/77851782
版权声明:本文为博主原创文章,转载请附上博文链接!