Simple FTP demo application using C#.Net 2.0
Introduction
An addition to the Microsoft .NET framework 2.0 to 1.x is the support for FTP. All these days we had to rely on 3rd party libraries which pretty well suited most of our needs, but for sure, there is an extra pleasure using the .net framework library classes. The code included is not designed to be a fulfledged reusable library, but rather an easy to use and reusable pieces of code which is easily comprehensible and can be reused and tweaked to fit your specific needs. Therefore the code for each functionality(upoad, download, delete etc...) can be easy picked up separately and reused. The main motive behind this article was the unavailability of .net2.0 ftp sample codes and their usage in C#; may be because its a new entrant to the .net scenario, or the third party implementations available were working pretty well, that this area of the .net2.0 library haven't got enough focus.
Background
I started working on this FTP module as part of my official work, but the requirement soon changed and I had to do it for .net 1.1. So, I haven't travelled deeper into the rabbit hole. But I believe this gives a good, instant start for using the FTP support in .net 2.0.
Using the code
Don't forget to add the following directive:
using System.Net;
using System.IO;
The following steps can be considered as a generic procedure of getting an FTP request executed using FtpWebRequest
object:
-
Create an
FtpWebRequest
object over an ftp server Uri -
Set the ftp method to execute (upload, download, etc.)
-
Set options(ssl support, transfer as binary/not etc.) for the ftp webrequest.
-
Set the login credentials(username, password)
-
Execute the request.
-
Recieve the response stream(if required).
-
Close the FTP Request, in addition to any open streams.
One point to watch out while coding for any ftp application is to have the settings for the ftp request proper to suit the ftp server and its specific configurations. FtpWebRequest
object exposes many poperties to have these settings in place.
The sample for the upload functionality is as follows:
First a uri is created which represents the ftp address along with the filename(directory structure included). This uri is used to create the FtpWebRequest
instance.
Then properties of the FtpWebRequest
object are set, which determines the settings for the ftp request.
Some of its important properties are:
-
Credentials - specifies the username and password to login to the FTP server.
-
KeepAlive - specifies if the control connection should be closed or not after the request is completed. By default it is set to true.
-
UseBinary - denotes the datatype for file transfers. The 2 modes of file transfer in this case are Binary and ASCII. At bit level both vary in the 8th bit of a byte. ASCII uses 8th bit as insignificant bit for error control, where as, for binary all the 8 bits are significant. So take care when you go for the ASCII transmission. To be simple, all those files that open and read well in notepad are safe as ascii. Executables, formatted docs etc should be send using binary mode. BTW sending ASCII files as binary works fine most of the time.
-
UsePassive - specifies to use either active or passive mode. Earlier active FTP worked fine with all clients, but now a days as most of the random ports will blocked by firewall, the active mode may fail. The passive FTP is helpful in this case. But still it causes issues at the server. The higher ports requested by client on server may also be blocked by firewall. But since FTP servers will need to make their servers accessible to the greatest number of clients, they will almost certainly need to support passive FTP. The reason why passive mode is considered safe is that, it ensures all data flow initiation comes from inside(client) the network rather than from the outside(server).
-
Contentlength - setting this property is useful for the server we request to but is not of much use for us(client), because FtpWebRequest usually ignores this property value, so it will not be available for our use in most of the cases. But if we set this property, the FTP server will get an idea in advance about the size of the file it should expect(in case of upload).
-
Method - Denotes what action(command) to take in the current request.(upload, download, filelist etc.) It is set a value defined in the WebRequestMethods.Ftp structure.
private void Upload(string filename)
{
FileInfo fileInf = new FileInfo(filename);
string uri = "ftp://" + ftpServerIP + "/" + fileInf.Name;
FtpWebRequest reqFTP;
// Create FtpWebRequest object from the Uri provided
reqFTP = (FtpWebRequest)FtpWebRequest.Create(new Uri("ftp://" + ftpServerIP + "/" + fileInf.Name));
// Provide the WebPermission Credintials
reqFTP.Credentials = new NetworkCredential(ftpUserID, ftpPassword);
// By default KeepAlive is true, where the control connection is not closed
// after a command is executed.
reqFTP.KeepAlive = false;
// Specify the command to be executed.
reqFTP.Method = WebRequestMethods.Ftp.UploadFile;
// Specify the data transfer type.
reqFTP.UseBinary = true;
// Notify the server about the size of the uploaded file
reqFTP.ContentLength = fileInf.Length;
// The buffer size is set to 2kb
int buffLength = 2048;
byte[] buff = new byte[buffLength];
int contentLen;
// Opens a file stream (System.IO.FileStream) to read the file to be uploaded
FileStream fs = fileInf.OpenRead();
try
{
// Stream to which the file to be upload is written
Stream strm = reqFTP.GetRequestStream();
// Read from the file stream 2kb at a time
contentLen = fs.Read(buff, 0, buffLength);
// Till Stream content ends
while (contentLen != 0)
{
// Write Content from the file stream to the FTP Upload Stream
strm.Write(buff, 0, contentLen);
contentLen = fs.Read(buff, 0, buffLength);
}
// Close the file stream and the Request Stream
strm.Close();
fs.Close();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message, "Upload Error");
}
}
Above is a sample code for FTP Upload (PUT). The underlying sub command used is STOR. Here an FtpWebRequest object is made for the specified file on the ftp server. Different properties are set for the request namely Credentials, KeepAlive, Method, UseBinary, ContentLength.
The file in our local machine is opened and the contents are written to the FTP request stream. Here a buffer of size 2kb is used as an appropriate size suited for upload of larger or smaler files.
private void Download(string filePath, string fileName)
{
FtpWebRequest reqFTP;
try
{
//filePath = <<The full path where the file is to be created. the>>,
//fileName = <<Name of the file to be createdNeed not name on FTP server. name name()>>
FileStream outputStream = new FileStream(filePath + "\\" + fileName, FileMode.Create);
reqFTP = (FtpWebRequest)FtpWebRequest.Create(new Uri("ftp://" + ftpServerIP + "/" + fileName));
reqFTP.Method = WebRequestMethods.Ftp.DownloadFile;
reqFTP.UseBinary = true;
reqFTP.Credentials = new NetworkCredential(ftpUserID, ftpPassword);
FtpWebResponse response = (FtpWebResponse)reqFTP.GetResponse();
Stream ftpStream = response.GetResponseStream();
long cl = response.ContentLength;
int bufferSize = 2048;
int readCount;
byte[] buffer = new byte[bufferSize];
readCount = ftpStream.Read(buffer, 0, bufferSize);
while (readCount > 0)
{
outputStream.Write(buffer, 0, readCount);
readCount = ftpStream.Read(buffer, 0, bufferSize);
}
ftpStream.Close();
outputStream.Close();
response.Close();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
Above is a sample code for Download of file from the FTP server. Unlike the Upload functionality described above, Download would require the response stream, which will contain the content of the file requested. Here the file to download is specified as part of the Uri which inturn is used for the creation of the FtpWebRequest object. To 'GET' the file requested, get the response of the FtpWebRequest
object using GetResponse()
method. This new response object built provides the response stream which contain the file content as stream, which you can easily convert to a file stream to get the file in place.
Note: We have the flexibility to set the location and name of the file under which it is to be saved on our local machine.
public string[] GetFileList()
{
string[] downloadFiles;
StringBuilder result = new StringBuilder();
FtpWebRequest reqFTP;
try
{
reqFTP = (FtpWebRequest)FtpWebRequest.Create(new Uri("ftp://" + ftpServerIP + "/"));
reqFTP.UseBinary = true;
reqFTP.Credentials = new NetworkCredential(ftpUserID, ftpPassword);
reqFTP.Method = WebRequestMethods.Ftp.ListDirectory;
WebResponse response = reqFTP.GetResponse();
StreamReader reader = new StreamReader(response.GetResponseStream());
string line = reader.ReadLine();
while (line != null)
{
result.Append(line);
result.Append("\n");
line = reader.ReadLine();
}
// to remove the trailing '\n'
result.Remove(result.ToString().LastIndexOf('\n'), 1);
reader.Close();
response.Close();
return result.ToString().Split('\n');
}
catch (Exception ex)
{
System.Windows.Forms.MessageBox.Show(ex.Message);
downloadFiles = null;
return downloadFiles;
}
}
Above is a sample block of code for getting the file list on the ftp server. The Uri is built specifying the FTP server address/name and the required path if any. In the above example the root folder is specified for the creation of the FtpWebRequest object. Here the response stream is used for the creation of a StreamReader object, which has the whole list of file names on the server separated by "\r\n" which is newline and carriagereturn together. You can get the whole file list ("\r\n" separated) using the ReadToEnd() method of the StreamReader object. The above implementation, reads each file name and creates a StringBuilder object by appending each file name. The resultant StringBuilder object is split into a stirng array and returned. I am sure there are better ways to do it. A better could be to remove the whole '\r' instances from the whole list (returned by <<StreamReader>>.ReadToEnd()) and split the resultant string using '\n' delimiter. Anyway I did not want to spend more of my energy and time pondering over it ;-).
The implementations for Rename, Delete, GetFileSize, FileListDetails, MakeDir
are very similar to the above pieces of code and the attached code is easily comprehensible.
Note: For Renaming, the new name can be assigned to the RenameTo property of FtpWebRequest
object. For MakeDirectory, the name of the new directory can be specified as part of the Uri used to create FtpWebRequest
object.
Points of Interest
Please take NOTE of the following points while coding in this area:
-
Unless the
EnableSsl
property is true, all data and commands, including your user name and password information, are sent to the server in clear text. Anyone monitoring network traffic can view your credentials and use them to connect to the server. If you are connecting to an FTP server that requires credentials and supports Secure Sockets Layer (SSL), you should set EnableSsl to true. -
If you do not have the proper WebPermission to access the FTP resource, a
SecurityException
exception is thrown. -
Requests are sent to the server by calling the
GetResponse
method. When the requested operation completes, an FtpWebResponse object is returned. TheFtpWebResponse
object provides the status of the operation and any data downloaded from the server. That is,StatusCode
property of FtpWebResponse object provides the latest status code returned by the FTP server.StatusDescription
property of FtpWebResponse object provides the description of the status code returned.