2019 SDN上机第2次作业

[2019 SDN上机第2次作业]

1. 利用mininet创建如下拓扑，要求拓扑支持OpenFlow 1.3协议，主机名、交换机名以及端口对应正确，请给出拓扑Mininet执行结果，展示端口连接情况

（1）创建test2.py文档

代码如下：

from mininet.topo import Topo

class Topo2( Topo ):

    def __init__( self ):

        # Initialize topology
        Topo.__init__( self )

        # add switches and hosts  
        sw1 = self.addSwitch('s1')
        sw2 = self.addSwitch('s2')

        h1 = self.addHost('h1')
        h2 = self.addHost('h2')
        h3 = self.addHost('h3')
        h4 = self.addHost('h4')
        h5 = self.addHost('h5')
        h6 = self.addHost('h6')

        # add links
        self.addLink(h1,sw1,1,1)
        self.addLink(h2,sw1,1,2)
        self.addLink(h3,sw1,1,3)
        self.addLink(sw1,sw2,4,4)
        self.addLink(h4,sw2,1,1)
        self.addLink(h5,sw2,1,2)
        self.addLink(h6,sw2,1,3)

topos = { 'mytopo': ( lambda: Topo2() ) }

（2）输入具体命令如下，创建拓扑

sudo mn --custom ./sdn2.py --topo mytopo --controller=remote,ip=127.0.0.1,port=6653 --switch ovsk,protocols=OpenFlow13

（3）使用net命令查看拓扑

（4）使用pingall命令测试所有节点连通性

2. 直接在Open vSwitch下发流表，实现如下连通性要求，请逐条说明所下发的流表含义

h1 -- h4互通
h2 -- h5互通
h3 -- h6互通
其余主机不通

（1）贴出OVS下发流表的命令

sudo ovs-ofctl -O OpenFlow13 add-flow s1 priority=1,in_port=1,actions=push_vlan:0x8100,set_field:4097-\>vlan_vid,output:4//将主机1进入sw1的包打上vlan tag，转发端口4
sudo ovs-ofctl -O OpenFlow13 add-flow s1 priority=1,in_port=2,actions=push_vlan:0x8100,set_field:4098-\>vlan_vid,output:4//将主机2进入sw1的包打上vlan tag，转发端口4
sudo ovs-ofctl -O OpenFlow13 add-flow s1 priority=1,in_port=3,actions=push_vlan:0x8100,set_field:4099-\>vlan_vid,output:4//将主机3进入sw1的包打上vlan tag，转发端口4
sudo ovs-ofctl -O OpenFlow13 add-flow s1 priority=1,dl_vlan=1,actions=pop_vlan,output:1//将从端口4的包去除vlan tag， 并根据tag进行转发端口1
sudo ovs-ofctl -O OpenFlow13 add-flow s1 priority=1,dl_vlan=2,actions=pop_vlan,output:2//将从端口4的包去除vlan tag， 并根据tag进行转发端口2
sudo ovs-ofctl -O OpenFlow13 add-flow s1 priority=1,dl_vlan=3,actions=pop_vlan,output:3//将从端口4的包去除vlan tag， 并根据tag进行转发端口3

sudo ovs-ofctl -O OpenFlow13 add-flow s2 priority=1,in_port=1,actions=push_vlan:0x8100,set_field:4097-\>vlan_vid,output:4//与上面类似，将主机4进入sw2的包打上vlan tag，转发端口4
sudo ovs-ofctl -O OpenFlow13 add-flow s2 priority=1,in_port=2,actions=push_vlan:0x8100,set_field:4098-\>vlan_vid,output:4//将主机5进入sw2的包打上vlan tag，转发端口4
sudo ovs-ofctl -O OpenFlow13 add-flow s2 priority=1,in_port=3,actions=push_vlan:0x8100,set_field:4099-\>vlan_vid,output:4//将主机6进入sw2的包打上vlan tag，转发端口4
sudo ovs-ofctl -O OpenFlow13 add-flow s2 priority=1,dl_vlan=1,actions=pop_vlan,output:1//将从端口4的包去除vlan tag， 并根据tag进行转发端口1
sudo ovs-ofctl -O OpenFlow13 add-flow s2 priority=1,dl_vlan=2,actions=pop_vlan,output:2//将从端口4的包去除vlan tag， 并根据tag进行转发端口2
sudo ovs-ofctl -O OpenFlow13 add-flow s2 priority=1,dl_vlan=3,actions=pop_vlan,output:3//将从端口4的包去除vlan tag， 并根据tag进行转发端口3