(OK) 编译cBPM-CentOS7-codeblocks
[root@localhost lib]# uname -a
Linux localhost.localdomain 4.2.1-1.el7.elrepo.x86_64 #1 SMP Mon Sep 21 20:01:19 EDT 2015 x86_64 x86_64 x86_64 GNU/Linux
[root@localhost cBPM]# pwd
/opt/cBPM
++++++++++++++++++++++第1步：在CentOS7上安装Codelocks的过程。
1.安装gcc,需要c和c++两部分,默认安装下,CentOS不安装编译器的,在终端输入以下命令即可
yum install gcc
yum install gcc-c++
2.安装gtk2-devel,因为默认已经安装了正式产品需要的支持库,但是没有安装开发所需要的文档.
yum install gtk2*
3. 安装wxGTK（或者wxwidgets），下载地址：http://www.wxwidgets.org/downloads/,下载的文件为：wxWidgets-3.0.2.tar.bz2,
解压之后，进入目录后执行命令
./configure --enable-xrc --enable-monolithic --enable-unicode
make -j5
make install
------------------------------------------------------
The installation of wxWidgets is finished. On certain
platforms (e.g. Linux) you'll now have to run ldconfig
if you installed a shared library and also modify the
LD_LIBRARY_PATH (or equivalent) environment variable.
wxWidgets comes with no guarantees and doesn't claim
to be suitable for any purpose.
Read the wxWindows Licence on licencing conditions.
------------------------------------------------------
ldconfig
4. 安装codeblocks，下载codeblocks安装包，下载地址：http://www.codeblocks.org/downloads/
这里有两种方式进行安装：
第一种方式是直接下载rpm包，可以直接进行安装，但是rpm安装形式，没有默认安装可视设计wxsmith。
第二种方式是下载源代码包，后缀为.tar.gz(.tar.bz2)，下载之后，解压缩，进入目录，执行命令
./configure --prefix=/codeblocks --with-contrib-plugins=all
（如果只是./configure那默认情况是不会安装可视设计wssmith，如果不需要图形界面开发的话可以直接使用第一种安装方式）
-------------------------------------------------------------------------------
checking for GTK2... yes
checking for GAMIN... no
configure: error: Package requirements (gamin) were not met:
No package 'gamin' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables GAMIN_CFLAGS
and GAMIN_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
-------------------------------------------------------------------------------
解决上面问题的方法： yum install gamin*
make -j5
make install
[root@localhost bin]# pwd
/codeblocks/bin
[root@localhost bin]# ./codeblocks
./codeblocks: error while loading shared libraries: libwx_gtk2u-3.0.so.0: cannot open shared object file: No such file or directory
----------------------------------------
vim /etc/ld.so.conf
最后一行添加：/usr/local/lib
保存退出，然后运行 ldconfig 即可。
----------------------------------------
[root@localhost bin]# ln -s /codeblocks/bin/codeblocks /root/桌面/codeblocks
5.安装好codeblocks后，在application下会出现programming菜单项，在这里可以启动codeblocks.
6.安装一下xterm：yum install xterm
7.如果没有看到codeblocks菜单项，可以：创建桌面启动器如下：
1、点击应用程序--系统工具
2、选择“启动应用程序”
3、在启动用程序首选项中选择“添加”
4、会出现和以前一样的添加启动程序对话框，进行设置
5、设置完名称和命令（路径）后，点击“添加”，启动器就被添加到列表里了
6、用鼠标选中刚添加的启动器，将其拖到桌面
7、右击新建的起动器，选择属性，在权限选项卡中勾选——执行：允许以程序执行文件
8、同上步，在基本选项卡中点击图标，可以设置启动器的桌面图标。
++++++++++++++++++++++第2步：安装 xerces-c-3.1.2.tar.gz
[root@localhost xerces-c-3.1.2]# pwd
/opt/cBPM/xerces-c-3.1.2
[root@localhost xerces-c-3.1.2]# ./configure --prefix=/opt/cBPM/xerces-c
[root@localhost xerces-c-3.1.2]# make -j
[root@localhost xerces-c-3.1.2]# ll src/.libs/libxerces-c-3.1.so
-rwxr-xr-x. 1 root root 25155928 9月 24 09:11 src/.libs/libxerces-c-3.1.so
[root@localhost xerces-c-3.1.2]# cp src/.libs/libxerces-c-3.1.so /opt/cBPM/criteria-lin/lib/
++++++++++++++++++++++第3步： 设置codeblocks 参数
********---------------------------编译参数 设置********codeblocks 全局参数 设置：
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【Other options】
-Wunknown-pragmas
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【#defines】
空
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Linker Settings】->【Link libraries】
空
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Search directories】->【Compiler】
空
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Search directories】->【Linker】
空
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Toolchain executable】->【compiler Installation directory】
/usr
gcc
g++
g++
ar
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Build options】->【处理器数】4
********---------------------------********
codeblocks 局部参数 设置： Criteria.Libraries.bOS
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【Compiler flags】
-g
-Wall
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【Other options】
-W
-O0
-fPIC
默认情况下，GNU工具链编译过程中，控制台输出的一行信息是不换行的，这样，当输出信息过长时(如编译错误时的信息)，会导致你无法看到完整的输出信息，加入-fmessage-length=0后，输出信息会根据控制台的宽度自动换行，这样就能看全输出信息了。
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【#defines】
SQLITE_OS_UNIX
WIN32
_DEBUG
_WINDOWS
_USRDLL
_USE_SQLITE3_
_CODEMANAGER_TRACE_ON_
BOS_EXPORTS
CODEMANAGER_EXPORTS
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Search directories】->【Compiler】
/opt/cBPM/criteria-lin/include/bOS
/opt/cBPM/criteria-lin/include/
/usr/include
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Pre/post build steps】->【Post-build steps】
cp /opt/cBPM/criteria-lin/bin/Criteria/Debug/bOS/libLibraries.so /opt/cBPM/criteria-lin/lib
右健单击【Criteria.Libraries.bOS】，选择【Properties】,设置见图。
********---------------------------********
codeblocks 局部参数 设置： Criteria.WorkflowEngine
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【Compiler flags】
-g
-Wall
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【Other options】
-W
-O0
-fPIC
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【#defines】
WIN32
_DEBUG
_WINDOWS
_USRDLL
ENGINE_EXPORTS
WAPI_EXPORTS
_CODEMANAGER_TRACE_ON_
_USE_SQLITE3_
BOS_EXPORTS
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Search directories】->【Compiler】
/opt/cBPM/criteria-lin/include/WorkflowEngine
/opt/cBPM/criteria-lin/include/bOS
/opt/cBPM/criteria-lin/include/
/usr/include
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Pre/post build steps】->【Post-build steps】
cp /opt/cBPM/criteria-lin/bin/Criteria/Debug/WorkflowEngine/libWorkflowEngineD.so /opt/cBPM/criteria-lin/lib
右健单击【Criteria.WorkflowEngine】，选择【Properties】,设置见图。
********---------------------------********
codeblocks 局部参数 设置： Criteria.Tools.Executor
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【Compiler flags】
-g
-Wall
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【Other options】
-W
-O0
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【#defines】
WIN32
_DEBUG
_CONSOLE
_CODEMANAGER_TRACE_ON_
BOS_EXPORTS
ENGINE_EXPORTS
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Linker Settings】->【link libraries】
Libraries
WorkflowEngineD
xerces-c-3.1
mysqlclient
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Search directories】->【Compiler】
/opt/cBPM/criteria-lin/include/bOS
/opt/cBPM/criteria-lin/include/WorkflowEngine
/opt/cBPM/criteria-lin/include/
/usr/include
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Search directories】->【Linker】
/usr/lib64/mysql/
/opt/cBPM/criteria-lin/lib
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Pre/post build steps】->【Post-build steps】
cp /opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor/executer /opt/cBPM/criteria-lin/lib
右健单击【Criteria.Tools.Executor】，选择【Properties】,设置见图。
++++++++++++++++++++++第4步：编译成功
-------------- Build: Debug Win32 in Criteria.Tools.Executor (compiler: GNU GCC Compiler)---------------
g++ -L/usr/lib64/mysql/ -L/opt/cBPM/criteria-lin/lib -o /opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor/executer /opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor/src/main.o -lLibraries -lWorkflowEngineD -lxerces-c-3.1 -lmysqlclient
Output file is /opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor/executer with size 47.44 KB
Running target post-build steps
cp /opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor/executer /opt/cBPM/criteria-lin/lib
Process terminated with status 0 (0 minute(s), 1 second(s))
43 error(s), 0 warning(s) (0 minute(s), 1 second(s))
++++++++++++++++++++++第5步：在命令行测试
[root@localhost lib]# pwd
/opt/cBPM/criteria-lin/lib
[root@localhost lib]# ls
executer libLibraries.so libWorkflowEngineD.so libxerces-c-3.1.so
[root@localhost lib]# ./executer
./executer: error while loading shared libraries: libLibraries.so: cannot open shared object file: No such file or directory
vim /etc/ld.so.conf
最后一行添加：/opt/cBPM/criteria-lin/lib
保存退出，然后运行 ldconfig 即可。
[root@localhost lib]# export WF_HOME=/opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor
[root@localhost lib]# export CRITERIA_HOME=/opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor
[root@localhost lib]# export WF_HOME=/opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor; export CRITERIA_HOME=/opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor
[root@localhost lib]# ./executer TestNotePadThe program will perform the following steps:
1: Criteria session initialization (only one time)
----- for each process (begin) -----
2: Create process instance from template
3: Execute process instance just created
----- for each process (end) -----
4: Querying for activity pending
5: close criteria session
Press a Key for beginning................................................
1
Criteria session Initialization.....(look at Executor trace file)
Criteria session Initialization [OK]
Create process instance from template
段错误(吐核)
[root@localhost lib]#
++++++++++++++++++++++第6步：在codeblocks测试 成功
用codeblocks写程序，编译运行后发现codeblocks默认的终端居然是xterm，上网找了一下，发现这个办法能够让codeblocks调用系统终端：
启动codeblocks，点击菜单栏 Settings ==> Environment settings
把下面的“Terminal to launch console programs”的内容
xterm -T $TITLE -e
改成：
gnome-terminal --maximize -t $TITLE -x
就可以啦。
启动codeblocks，点击菜单栏 Settings ==> Environment settings ==> Environment variables
添加：
WF_HOME=/opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor
CRITERIA_HOME=/opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor
单击 codeblocks 的 运行 按钮，成功
Linux localhost.localdomain 4.2.1-1.el7.elrepo.x86_64 #1 SMP Mon Sep 21 20:01:19 EDT 2015 x86_64 x86_64 x86_64 GNU/Linux
[root@localhost cBPM]# pwd
/opt/cBPM
++++++++++++++++++++++第1步：在CentOS7上安装Codelocks的过程。
1.安装gcc,需要c和c++两部分,默认安装下,CentOS不安装编译器的,在终端输入以下命令即可
yum install gcc
yum install gcc-c++
2.安装gtk2-devel,因为默认已经安装了正式产品需要的支持库,但是没有安装开发所需要的文档.
yum install gtk2*
3. 安装wxGTK（或者wxwidgets），下载地址：http://www.wxwidgets.org/downloads/,下载的文件为：wxWidgets-3.0.2.tar.bz2,
解压之后，进入目录后执行命令
./configure --enable-xrc --enable-monolithic --enable-unicode
make -j5
make install
------------------------------------------------------
The installation of wxWidgets is finished. On certain
platforms (e.g. Linux) you'll now have to run ldconfig
if you installed a shared library and also modify the
LD_LIBRARY_PATH (or equivalent) environment variable.
wxWidgets comes with no guarantees and doesn't claim
to be suitable for any purpose.
Read the wxWindows Licence on licencing conditions.
------------------------------------------------------
ldconfig
4. 安装codeblocks，下载codeblocks安装包，下载地址：http://www.codeblocks.org/downloads/
这里有两种方式进行安装：
第一种方式是直接下载rpm包，可以直接进行安装，但是rpm安装形式，没有默认安装可视设计wxsmith。
第二种方式是下载源代码包，后缀为.tar.gz(.tar.bz2)，下载之后，解压缩，进入目录，执行命令
./configure --prefix=/codeblocks --with-contrib-plugins=all
（如果只是./configure那默认情况是不会安装可视设计wssmith，如果不需要图形界面开发的话可以直接使用第一种安装方式）
-------------------------------------------------------------------------------
checking for GTK2... yes
checking for GAMIN... no
configure: error: Package requirements (gamin) were not met:
No package 'gamin' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables GAMIN_CFLAGS
and GAMIN_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
-------------------------------------------------------------------------------
解决上面问题的方法： yum install gamin*
make -j5
make install
[root@localhost bin]# pwd
/codeblocks/bin
[root@localhost bin]# ./codeblocks
./codeblocks: error while loading shared libraries: libwx_gtk2u-3.0.so.0: cannot open shared object file: No such file or directory
----------------------------------------
vim /etc/ld.so.conf
最后一行添加：/usr/local/lib
保存退出，然后运行 ldconfig 即可。
----------------------------------------
[root@localhost bin]# ln -s /codeblocks/bin/codeblocks /root/桌面/codeblocks
5.安装好codeblocks后，在application下会出现programming菜单项，在这里可以启动codeblocks.
6.安装一下xterm：yum install xterm
7.如果没有看到codeblocks菜单项，可以：创建桌面启动器如下：
1、点击应用程序--系统工具
2、选择“启动应用程序”
3、在启动用程序首选项中选择“添加”
4、会出现和以前一样的添加启动程序对话框，进行设置
5、设置完名称和命令（路径）后，点击“添加”，启动器就被添加到列表里了
6、用鼠标选中刚添加的启动器，将其拖到桌面
7、右击新建的起动器，选择属性，在权限选项卡中勾选——执行：允许以程序执行文件
8、同上步，在基本选项卡中点击图标，可以设置启动器的桌面图标。
++++++++++++++++++++++第2步：安装 xerces-c-3.1.2.tar.gz
[root@localhost xerces-c-3.1.2]# pwd
/opt/cBPM/xerces-c-3.1.2
[root@localhost xerces-c-3.1.2]# ./configure --prefix=/opt/cBPM/xerces-c
[root@localhost xerces-c-3.1.2]# make -j
[root@localhost xerces-c-3.1.2]# ll src/.libs/libxerces-c-3.1.so
-rwxr-xr-x. 1 root root 25155928 9月 24 09:11 src/.libs/libxerces-c-3.1.so
[root@localhost xerces-c-3.1.2]# cp src/.libs/libxerces-c-3.1.so /opt/cBPM/criteria-lin/lib/
++++++++++++++++++++++第3步： 设置codeblocks 参数
********---------------------------编译参数 设置********codeblocks 全局参数 设置：
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【Other options】
-Wunknown-pragmas
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【#defines】
空
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Linker Settings】->【Link libraries】
空
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Search directories】->【Compiler】
空
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Search directories】->【Linker】
空
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Toolchain executable】->【compiler Installation directory】
/usr
gcc
g++
g++
ar
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Build options】->【处理器数】4
********---------------------------********
codeblocks 局部参数 设置： Criteria.Libraries.bOS
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【Compiler flags】
-g
-Wall
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【Other options】
-W
-O0
-fPIC
默认情况下，GNU工具链编译过程中，控制台输出的一行信息是不换行的，这样，当输出信息过长时(如编译错误时的信息)，会导致你无法看到完整的输出信息，加入-fmessage-length=0后，输出信息会根据控制台的宽度自动换行，这样就能看全输出信息了。
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【#defines】
SQLITE_OS_UNIX
WIN32
_DEBUG
_WINDOWS
_USRDLL
_USE_SQLITE3_
_CODEMANAGER_TRACE_ON_
BOS_EXPORTS
CODEMANAGER_EXPORTS
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Search directories】->【Compiler】
/opt/cBPM/criteria-lin/include/bOS
/opt/cBPM/criteria-lin/include/
/usr/include
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Pre/post build steps】->【Post-build steps】
cp /opt/cBPM/criteria-lin/bin/Criteria/Debug/bOS/libLibraries.so /opt/cBPM/criteria-lin/lib
右健单击【Criteria.Libraries.bOS】，选择【Properties】,设置见图。
********---------------------------********
codeblocks 局部参数 设置： Criteria.WorkflowEngine
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【Compiler flags】
-g
-Wall
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【Other options】
-W
-O0
-fPIC
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【#defines】
WIN32
_DEBUG
_WINDOWS
_USRDLL
ENGINE_EXPORTS
WAPI_EXPORTS
_CODEMANAGER_TRACE_ON_
_USE_SQLITE3_
BOS_EXPORTS
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Search directories】->【Compiler】
/opt/cBPM/criteria-lin/include/WorkflowEngine
/opt/cBPM/criteria-lin/include/bOS
/opt/cBPM/criteria-lin/include/
/usr/include
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Pre/post build steps】->【Post-build steps】
cp /opt/cBPM/criteria-lin/bin/Criteria/Debug/WorkflowEngine/libWorkflowEngineD.so /opt/cBPM/criteria-lin/lib
右健单击【Criteria.WorkflowEngine】，选择【Properties】,设置见图。
********---------------------------********
codeblocks 局部参数 设置： Criteria.Tools.Executor
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【Compiler flags】
-g
-Wall
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【Other options】
-W
-O0
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Compiler Settings】->【#defines】
WIN32
_DEBUG
_CONSOLE
_CODEMANAGER_TRACE_ON_
BOS_EXPORTS
ENGINE_EXPORTS
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Linker Settings】->【link libraries】
Libraries
WorkflowEngineD
xerces-c-3.1
mysqlclient
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Search directories】->【Compiler】
/opt/cBPM/criteria-lin/include/bOS
/opt/cBPM/criteria-lin/include/WorkflowEngine
/opt/cBPM/criteria-lin/include/
/usr/include
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Search directories】->【Linker】
/usr/lib64/mysql/
/opt/cBPM/criteria-lin/lib
【Settings】->【Compiler】->【GNU ARM GCC Compiler For Android】->【Pre/post build steps】->【Post-build steps】
cp /opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor/executer /opt/cBPM/criteria-lin/lib
右健单击【Criteria.Tools.Executor】，选择【Properties】,设置见图。
++++++++++++++++++++++第4步：编译成功
-------------- Build: Debug Win32 in Criteria.Tools.Executor (compiler: GNU GCC Compiler)---------------
g++ -L/usr/lib64/mysql/ -L/opt/cBPM/criteria-lin/lib -o /opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor/executer /opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor/src/main.o -lLibraries -lWorkflowEngineD -lxerces-c-3.1 -lmysqlclient
Output file is /opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor/executer with size 47.44 KB
Running target post-build steps
cp /opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor/executer /opt/cBPM/criteria-lin/lib
Process terminated with status 0 (0 minute(s), 1 second(s))
43 error(s), 0 warning(s) (0 minute(s), 1 second(s))
++++++++++++++++++++++第5步：在命令行测试
[root@localhost lib]# pwd
/opt/cBPM/criteria-lin/lib
[root@localhost lib]# ls
executer libLibraries.so libWorkflowEngineD.so libxerces-c-3.1.so
[root@localhost lib]# ./executer
./executer: error while loading shared libraries: libLibraries.so: cannot open shared object file: No such file or directory
vim /etc/ld.so.conf
最后一行添加：/opt/cBPM/criteria-lin/lib
保存退出，然后运行 ldconfig 即可。
[root@localhost lib]# export WF_HOME=/opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor
[root@localhost lib]# export CRITERIA_HOME=/opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor
[root@localhost lib]# export WF_HOME=/opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor; export CRITERIA_HOME=/opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor
[root@localhost lib]# ./executer TestNotePadThe program will perform the following steps:
1: Criteria session initialization (only one time)
----- for each process (begin) -----
2: Create process instance from template
3: Execute process instance just created
----- for each process (end) -----
4: Querying for activity pending
5: close criteria session
Press a Key for beginning................................................
1
Criteria session Initialization.....(look at Executor trace file)
Criteria session Initialization [OK]
Create process instance from template
段错误(吐核)
[root@localhost lib]#
++++++++++++++++++++++第6步：在codeblocks测试 成功
用codeblocks写程序，编译运行后发现codeblocks默认的终端居然是xterm，上网找了一下，发现这个办法能够让codeblocks调用系统终端：
启动codeblocks，点击菜单栏 Settings ==> Environment settings
把下面的“Terminal to launch console programs”的内容
xterm -T $TITLE -e
改成：
gnome-terminal --maximize -t $TITLE -x
就可以啦。
启动codeblocks，点击菜单栏 Settings ==> Environment settings ==> Environment variables
添加：
WF_HOME=/opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor
CRITERIA_HOME=/opt/cBPM/criteria-lin/bin/Criteria/Debug/Tools.Executor
单击 codeblocks 的 运行 按钮，成功
<script>window._bd_share_config={"common":{"bdSnsKey":{},"bdText":"","bdMini":"2","bdMiniList":false,"bdPic":"","bdStyle":"0","bdSize":"16"},"share":{}};with(document)0[(getElementsByTagName('head')[0]||body).appendChild(createElement('script')).src='http://bdimg.share.baidu.com/static/api/js/share.js?v=89860593.js?cdnversion='+~(-new Date()/36e5)];</script>
阅读(173) | 评论(0) | 转发(0) |
相关热门文章
给主人留下些什么吧！~~
评论热议
