nload - displays the current network usage

nload(1)                                       Network monitoring tools                                       nload(1)



NAME
       nload - displays the current network usage


SYNOPSIS
       nload  [-a  period]  [-i  max_scaling]  [-m]  [-o  max_scaling]  [-t  interval]  [-u  h|H|b|B|k|K|m|M|g|G]  [-U
       h|H|b|B|k|K|m|M|g|G] [devices]

       nload --help|-h


DESCRIPTION
       nload is a console application which monitors network traffic and bandwidth usage in real time.  It  visualizes
       the  in- and outgoing traffic using two graphs and provides additional info like the total amount of transfered
       data and min/max network usage.


USAGE
       When running nload, you can switch between the devices (which you gave nload either  on  the  command  line  or
       which were auto-detected) by pressing the left and right arrow keys. If the -m command line parameter is given,
       the arrow keys switch as many devices back and forth as there are shown on the screen. If you want to quit,  do
       so by pressing 'q' or 'Ctrl+C'.

       For further key shortcuts, have a look at the sections MAIN WINDOW and OPTION WINDOW below.


OPTIONS
       A summary of the options supported by nload is included below.


       -a period
              Sets the length in seconds of the time window for average calculation.  The default is 300.

       -i max_scaling
              Specifies  the  100%  mark  in  kBit/s of the graph indicating the incoming bandwidth usage.  Ignored if
              max_scaling is 0 or the switch -m is given. The default value for max_scaling is 10240.

       -m     Show multiple devices at a time; do not show the traffic graphs.

       -o max_scaling
              Same as -i but for the graph indicating the outgoing bandwidth usage.

       -t interval
              Determines the refresh interval of the display in milliseconds.  The default value of interval is 500.

              PLEASE NOTE: Specifying refresh intervals shorter than about 100 milliseconds makes traffic  calculation
              very unprecise. Also the display may flicker using such short refresh intervals.  nload tries to balance
              this out by doing extra time measurements, but this may not always succeed.

       -u h|H|b|B|k|K|m|M|g|G
              Sets the type of unit used for the display of traffic numbers.  h means human readable (auto), b  Bit/s,
              k  kBit/s, m MBit/s and g GBit/s.  The upper case letters mean the corresponding units in Bytes (instead
              of Bits).  The default is k.

       -U h|H|b|B|k|K|m|M|g|G
              Same as -u, but for an amount of data, e.g. Bit, kByte, GBit etc. (without "/s").  The default is M.

       devices
              Network devices to use. The default is "all", which means to display all auto-detected devices.

       -h, --help
              Show a short summary of these command line options.


MAIN WINDOW
       After starting, nload begins to monitor the network devices given on the command line, or, if none where speci‐
       fied, the default device. In this mode, the following key shortcuts are available.


       'ArrowRight', 'ArrowDown', 'PageDown', 'Enter', 'Tab'
              Switch  the  display  to the next network device, or, when started with the -m flag, to the next page of
              devices.


       'ArrowLeft', 'ArrowUp', 'PageUp'
              Switch the display to the previous network device, or, when started with the -m flag,  to  the  previous
              page of devices.


       'F2'   Show the option window (see section OPTION WINDOW below).


       'F5'   Save current settings to the user's config file.


       'F6'   Reload settings from the config files.


       'q', 'Ctrl+C'
              Quit nload.


OPTION WINDOW
       The  parameters  given to nload on the command line can be adjusted during run time by pressing the 'F2' key. A
       small window appears on the top of the screen, listing the available settings.


       'F2'   Show/hide the option window.


       'ArrowLeft', 'ArrowRight', 'Home', 'End'
              Navigate within the edit fields.


       'ArrowUp', 'ArrowDown', 'Enter'
              Navigate between the settings.


       'PageUp', 'PageDown', 'Tab'
              Toggle between the different values possible for the current field.


       '+' / '-'
              Switch to the next / previous page of settings.


FILES
       /etc/nload.conf
              System-wide configuration file.


       $(HOME)/.nload
              User-specific configuration file (overrides system-wide settings).


       /sys/class/net/*/* /proc/net/dev
              are read by nload when running on Linux to get the network traffic data.


VERSION
       This manual page describes version 0.7.4 of nload.

       For updates, look at the nload homepage:
       http://www.roland-riegel.de/nload/


HELP
       If you need help, either contact me directly (see below) or write to the nload-user mailing list at
       nload-user@lists.sourceforge.net
       after having subscribed at
       https://lists.sourceforge.net/lists/listinfo/nload-user.


AUTHOR
       Copyright (C) 2001 - 2012 Roland Riegel <feedback@roland-riegel.de>

       This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Pub‐
       lic  License as published by the Free Software Foundation; either version 2 of the License, or (at your option)
       any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT  ANY  WARRANTY;  without  even  the
       implied  warranty  of  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
       for more details.

       You should have received a copy of the GNU General Public License along with this program; if not, write to the
       Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.



nload                                              February 06, 2012                                          nload(1)