(OK) Docker—GNS3—IMUNES—Linux
http://gcetusic.blogspot.com/2015/08/docker-networking-images.html
Thursday, 20 August 2015
Docker in network emulators
Recently, GNS3, a popular network emulator has been developing support for Docker as one of its endpoint devices. What they call endpoint devices are actually VirtualBox and VMWare VMs and now Docker containers. It also supports other types of virtual nodes like switches and routers that are actually Cisco IOS images. This is in contrast to IMUNES which uses Docker to emulate both what they have as equivalent to GNS3 endpoints (PC and Host nodes) and switches and routers by configuring a Docker container based on the type of device.Regardless of the type of device you're trying to emulate, using some kind of generic virtualization technology in network emulators enables users to choose which software is available on their network nodes. True, you can't run Cisco IOS on those nodes but you can run software like Nginx, Gunicorn, Apache, MongoDB, PostgreSQL and others in a controlled networked environment. Using Docker as the underlying technology makes sense because it efficiently uses the host resources that enable network emulators to create a hundred network nodes in under a minute while still providing the flexibility to set up your own brand of virtual node. This is different from full virtualization like the one VMWare and VirtualBox provide and similar to what LXC does. I'm not going into details on how full and kernel-level virtualizations work or the difference between LXC and Docker. This post is about Docker. So first, a little introduction to Docker and how it works.
Linux namespaces
Docker is a lightweight virtualization technology that uses Linux namespaces to isolate resources between one another. Linux provides the following namespaces:
Why several namespaces? Because this way Linux can finely tune which processes can access which resources. For example, if you run two processes like Apache and PostgreSQL and they have different network namespaces, they won't see the same interfaces. However, since no one told them to use their own mount namespace, they still see the same mount points. This can be useful, you generally want all processes to see the same root disk but not other resources. Tools like Docker and LXC do a pretty good job putting it all together so you get what looks like lightweight virtual machines. Because it's done inside the same kernel it's lightning fast. However, this limits us to using the same kernel. With Linux namespaces you can only create Linux VMs while with VirtualBox you get full virtualization. Using Docker is not that much of a restriction in network emulators because it's designed for Linux which provides a wide range of network software. Also, with boot2docker (and Docker Machine) for Mac OS X and the recent port to FreeBSD, the list of OS restrictions becomes smaller and smaller.
Namespaces can get a bit technical and if you're interested in how they work, here's a few articles to help you start:
Much like repositories on Github, Docker has something called Docker Hub where various images are stored. Organizations like PostgreSQL, Redis, Fedora and Debian all have their own images hosted there that make it easy to quickly start a Docker container with their software installed. There's a whole bunch of sites offering documentation on how to install Docker, create Docker images, push them to Hub and start containers from those images but here's a short recipe for Fedora 22:
[cetko@nerevar ~]$ sudo dnf install docker
[cetko@nerevar ~]$ sudo systemctl start docker
[cetko@nerevar ~]$ docker pull debian
latest: Pulling from debian
902b87aaaec9: Already exists
9a61b6b1315e: Already exists
Digest: sha256:b42e664a14b4ed96f7891103a6d0002a6ae2f09f5380c3171566bc5b6446a8ce
Status: Downloaded newer image for debian:latest
[cetko@nerevar ~]$ docker run -it debian bash
root@9695859bac69:/#
And that's it! With the last command you've run the Bash shell inside a containerized Debian Jessie installation. You're all set up to use any of the multitude of Docker images hosted on Hub. Now, what if we wanted to create a Docker image but with specific
network tools available on Linux and use it as a network node inside an emulator? Think it can't be done? There's already at least two such repositories on Hub, both based on Debian Jessie and share much of the same setup, one used in
GNS3 and the other in IMUNES:
Namespace Isolates
IPC System V IPC, POSIX message queues
Network Network devices, stacks, ports, etc.
Mount Mount points
PID Process IDs
User User and group IDs
UTS Hostname and NIS domain name
Why several namespaces? Because this way Linux can finely tune which processes can access which resources. For example, if you run two processes like Apache and PostgreSQL and they have different network namespaces, they won't see the same interfaces. However, since no one told them to use their own mount namespace, they still see the same mount points. This can be useful, you generally want all processes to see the same root disk but not other resources. Tools like Docker and LXC do a pretty good job putting it all together so you get what looks like lightweight virtual machines. Because it's done inside the same kernel it's lightning fast. However, this limits us to using the same kernel. With Linux namespaces you can only create Linux VMs while with VirtualBox you get full virtualization. Using Docker is not that much of a restriction in network emulators because it's designed for Linux which provides a wide range of network software. Also, with boot2docker (and Docker Machine) for Mac OS X and the recent port to FreeBSD, the list of OS restrictions becomes smaller and smaller.
Namespaces can get a bit technical and if you're interested in how they work, here's a few articles to help you start:
- http://man7.org/linux/man-pages/man7/namespaces.7.html
- http://www.toptal.com/linux/separation-anxiety-isolating-your-system-with-linux-namespaces
- https://lwn.net/Articles/531114/
Docker images
The collection of resources and namespaces Docker puts together and that act like VMs are called containers. That's why it's called Docker I guess. Anyway, to start multiple containers Docker uses templates called images. These templates generally don't have any binaries directly included but provide instructions on which software packages to download, scripts to run, make some configurations and so on. Then, based on those instructions listed inside what is called a Dockerfile generate the image. Of course, you can do pretty much whatever you want inside the Dockerfile so if you have any scripts or binaries that you want to include inside the image, you can ship it.Much like repositories on Github, Docker has something called Docker Hub where various images are stored. Organizations like PostgreSQL, Redis, Fedora and Debian all have their own images hosted there that make it easy to quickly start a Docker container with their software installed. There's a whole bunch of sites offering documentation on how to install Docker, create Docker images, push them to Hub and start containers from those images but here's a short recipe for Fedora 22:
[cetko@nerevar ~]$ sudo dnf install docker
[cetko@nerevar ~]$ sudo systemctl start docker
[cetko@nerevar ~]$ docker pull debian
latest: Pulling from debian
902b87aaaec9: Already exists
9a61b6b1315e: Already exists
Digest: sha256:b42e664a14b4ed96f7891103a6d0002a6ae2f09f5380c3171566bc5b6446a8ce
Status: Downloaded newer image for debian:latest
[cetko@nerevar ~]$ docker run -it debian bash
root@9695859bac69:/#
- https://hub.docker.com/r/gns3/dockervm/
- https://hub.docker.com/r/imunes/vroot/
They're actually automated builds created from instructions in Dockerfiles (Docker image configuration files) hosted in Github repositories. This is actually common practice: users push their Docker images to Hub and save Dockerfiles to Github so users
can fork repos and build their own images. Give it a try!
Now, there's a lot more to building a network emulator that just downloading a Docker image that fits in nicely in network emulators so stay tuned for more posts of my "Building a network emulator" series.
