(OK) install-ns3——using-testing

-----------------------------------------------------------------------------------------------------

install

http://blog.csdn.net/ztguang/article/details/51388366

-----------------------------------------------------------------------------------------------------

-----------------------------------------------------------------------------------------------------
https://www.nsnam.org/wiki/Installation
Prerequisites
-----------------------------------------------------------------------------------------------------
yum install gcc gcc-c++ python python-devel mercurial bzr gsl gsl-devel gtk2 gtk2-devel gdb valgrind doxygen graphviz ImageMagick python-sphinx dia texlive texlive-latex

yum install flex bison tcpdump sqlite sqlite-devel libxml2 libxml2-devel uncrustify openmpi openmpi-devel boost-devel goocanvas-devel graphviz graphviz-devel

yum install python-setuptools-devel
yum install easy_install
yum install pygraphviz
yum install python-kiwi pygoocanvas cmake glibc-devel.i686 glibc-devel.x86_64
-----------------------------------------------------------------------------------------------------

download ns-allinone-3.25.tar.bz2

[root@localhost ns-allinone-3.25]# pwd
/opt/tools/network_simulators/ns3/ns-allinone-3.25

[root@localhost ns-allinone-3.25]#
./build.py --enable-examples --enable-tests
cd ns-3.25
./test.py

//to install sphinx-build, then compile to produce document.
easy_install Sphinx
[root@localhost tutorial]# pwd
/opt/tools/network_simulators/ns3/ns-allinone-3.25/ns-3.25/doc/tutorial
[root@localhost tutorial]# make html

-----------------------------------------------------------------------------------------------------
using
-----------------------------------------------------------------------------------------------------


[root@localhost netanim-3.107]# pwd
/opt/tools/network_simulators/ns3/ns-allinone-3.25/netanim-3.107

//左上角File open按钮，选择XML文件，单击播放按钮开始动画。
[root@localhost netanim-3.107]#
./NetAnim

-----------------------------------------------------------------------------------------------------
https://www.nsnam.org/wiki/HOWTO_Use_Linux_Containers_to_set_up_virtual_networks

HOWTO Use Linux Containers to set up virtual networks
-----------------------------------------------------------------------------------------------------

dnf install lxc bridge-utils tunctl
man lxc
man lxc.conf
less /usr/share/doc/lxc/examples/lxc-veth.conf

[root@localhost ns-3.25]# lxc-create -n right -f src/tap-bridge/examples/lxc-right.conf
A template must be specified.
Use "none" if you really want a container without a rootfs.
[root@localhost ns-3.25]#
lxc-create -n left -f src/tap-bridge/examples/lxc-left.conf -t none
lxc-create -n right -f src/tap-bridge/examples/lxc-right.conf -t none

bash: lxc-ls: 未找到命令...
dnf install /usr/bin/lxc-ls
dnf whatprovides /usr/bin/lxc-ls
lxc-ls

lxc-start -n left /bin/bash
lxc-start -n right /bin/bash

lxc-start -n left /bin/bash -F

-----------------------------------------------------------------------------------------------------
[root@localhost ~]# ifconfig
br-left: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet6 fe80::b867:79ff:fe41:64a0  prefixlen 64  scopeid 0x20<link>
        ether ba:67:79:41:64:a0  txqueuelen 1000  (Ethernet)
        RX packets 1  bytes 76 (76.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 3  bytes 258 (258.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

br-right: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 1a:32:41:31:a2:c1  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 172.17.0.1  netmask 255.255.0.0  broadcast 0.0.0.0
        inet6 fe80::42:e1ff:fe66:4909  prefixlen 64  scopeid 0x20<link>
        ether 02:42:e1:66:49:09  txqueuelen 0  (Ethernet)
        RX packets 39537  bytes 2293419 (2.1 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 44548  bytes 66114210 (63.0 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp13s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.108.162.164  netmask 255.255.252.0  broadcast 10.108.163.255
        inet6 2001:da8:215:828:3e97:eff:fef0:b5bb  prefixlen 64  scopeid 0x0<global>
        inet6 fe80::3e97:eff:fef0:b5bb  prefixlen 64  scopeid 0x20<link>
        ether 3c:97:0e:f0:b5:bb  txqueuelen 1000  (Ethernet)
        RX packets 4355119  bytes 4027064822 (3.7 GiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2644236  bytes 367587242 (350.5 MiB)
        TX errors 0  dropped 47 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Local Loopback)
        RX packets 3224  bytes 299084 (292.0 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 3224  bytes 299084 (292.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

tap-left: flags=4355<UP,BROADCAST,PROMISC,MULTICAST>  mtu 1500
        ether ba:67:79:41:64:a0  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

tap-right: flags=4355<UP,BROADCAST,PROMISC,MULTICAST>  mtu 1500
        ether 1a:32:41:31:a2:c1  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 192.168.122.1  netmask 255.255.255.0  broadcast 192.168.122.255
        ether 52:54:00:b5:58:ab  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlp7s0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 9c:d2:1e:a5:e7:f1  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@localhost ~]# brctl show
bridge name    bridge id        STP enabled    interfaces
br-left        8000.ba67794164a0    no        tap-left
br-right        8000.1a324131a2c1    no        tap-right
docker0        8000.0242e1664909    no        
virbr0        8000.525400b558ab    yes        virbr0-nic
[root@localhost ~]#

-----------------------------------------------------------------------------------------------------

-----------------------------------------------------------------------------------------------------
Building with Waf
------------------------
Up to this point, we have used either the build.py script, or the bake tool, to get started with building ns-3. These tools are useful for building ns-3 and supporting libraries, and they call into the ns-3 directory to call the Waf build tool to do the actual building. Most users quickly transition to using Waf directly to configure and build ns-3. So, to proceed, please change your working directory to the ns-3 directory that you have initially built.
-----------------------------------------------------------------------------------------------------
[root@localhost ns-3.25]# pwd
/opt/tools/network_simulators/ns3/ns-allinone-3.25/ns-3.25
[root@localhost ns-3.25]#

./waf clean
./waf --build-profile=optimized --enable-examples --enable-tests configure

./waf --help
./test.py -c core
./waf --run hello-simulator

-----------------------------------------------------------------------------------------------------
// ./waf clean
// ./waf configure --enable-examples --enable-tests
// ./waf clean
// ./waf configure --build-profile=optimized --enable-examples --enable-tests

./waf clean
./waf configure --build-profile=debug --enable-examples --enable-tests     //use this command
./waf     //build the debug versions of the ns-3 programs, will take a long time

------------------------------------------------------
[root@localhost ns-3.25]# pwd
/opt/tools/network_simulators/ns3/ns-allinone-3.25/ns-3.25
[root@localhost ns-3.25]#

cp examples/tutorial/first.cc scratch/myfirst.cc
./waf     //Now build your first example script using waf
./waf --run scratch/myfirst
------------------------------------------------------
[root@localhost ns-3.25]# ./waf --run scratch/myfirst
Waf: Entering directory `/opt/tools/network_simulators/ns3/ns-allinone-3.25/ns-3.25/build'
Waf: Leaving directory `/opt/tools/network_simulators/ns3/ns-allinone-3.25/ns-3.25/build'
Build commands will be stored in build/compile_commands.json
'build' finished successfully (2.072s)
At time 2s client sent 1024 bytes to 10.1.1.2 port 9
At time 2.00369s server received 1024 bytes from 10.1.1.1 port 49153
At time 2.00369s server sent 1024 bytes to 10.1.1.1 port 49153
At time 2.00737s client received 1024 bytes from 10.1.1.2 port 9
[root@localhost ns-3.25]#
------------------------------------------------------