houshoul - Linux bridge have very high packet delay variation and latency?
I configured a very simple bridge under Debian Wheezy(kernel 3.2.0-4-686-pae). I simply created bridge interface with
brctl addbr br0
and added interfaces eth1
and eth2
into this bridge with
brctl addif br0 eth1
and brctl addif br0 eth2
commands. STP is disabled. However, the latency of frames switched is very high and fluctuating. For example RTT shown in
ping
output fluctuates from 30 to 1100ms if I ping a router in the very same broadcast domain. Usually it is below 1ms. However, there seems to be no packet loss. CPU load on this Linux bridge is very low. According to
ip -s link show dev eth1
and ip -s link show dev eth2
there are no errors or drops. Both
eth0
and eth1
are Realtek PCI NIC's using the 8139too LKM. What might cause such behavior? Some sort of faulty queuing?
EDIT: one of the Realtek interfaces was problematic. I formed a bridge with new NIC.
【推荐】国内首个AI IDE,深度理解中文开发场景,立即下载体验Trae
【推荐】编程新体验,更懂你的AI,立即体验豆包MarsCode编程助手
【推荐】抖音旗下AI助手豆包,你的智能百科全书,全免费不限次数
【推荐】轻量又高性能的 SSH 工具 IShell:AI 加持,快人一步
· 基于Microsoft.Extensions.AI核心库实现RAG应用
· Linux系列:如何用heaptrack跟踪.NET程序的非托管内存泄露
· 开发者必知的日志记录最佳实践
· SQL Server 2025 AI相关能力初探
· Linux系列:如何用 C#调用 C方法造成内存泄露
· 无需6万激活码!GitHub神秘组织3小时极速复刻Manus,手把手教你使用OpenManus搭建本
· Manus爆火,是硬核还是营销?
· 终于写完轮子一部分:tcp代理 了,记录一下
· 别再用vector<bool>了!Google高级工程师:这可能是STL最大的设计失误
· 单元测试从入门到精通