I2C(二) linux2.6
I2C(二) linux2.6
目录
总线驱动
官方例子是drivers\i2c\busses\i2c-s3c2410.c
关键结构
static const struct i2c_algorithm s3c24xx_i2c_algorithm = {
.master_xfer = s3c24xx_i2c_xfer,
.functionality = s3c24xx_i2c_func,
};
static struct s3c24xx_i2c s3c24xx_i2c = {
.lock = __SPIN_LOCK_UNLOCKED(s3c24xx_i2c.lock),
.wait = __WAIT_QUEUE_HEAD_INITIALIZER(s3c24xx_i2c.wait),
.tx_setup = 50,
.adap = {
.name = "s3c2410-i2c",
.owner = THIS_MODULE,
.algo = &s3c24xx_i2c_algorithm,
.retries = 2,
.class = I2C_CLASS_HWMON,
},
};
struct i2c_adapter {
struct module *owner; //所属模块
unsigned int id; //algorithm的类型，定义于i2c-id.h,
unsigned int class;
const struct i2c_algorithm *algo; //总线通信方法结构体指针
void *algo_data; //algorithm数据
struct rt_mutex bus_lock; //控制并发访问的自旋锁
int timeout;
int retries; //重试次数
struct device dev; //适配器设备
int nr; //存放在i2c_adapter_idr里的位置号
char name[48]; //适配器名称
struct completion dev_released; //用于同步
struct list_head userspace_clients; //client链表头
};
入口
这里是一个platform总线框架,第一个函数也就是probe
static struct platform_driver s3c2440_i2c_driver = {
.probe = s3c24xx_i2c_probe,
.remove = s3c24xx_i2c_remove,
.resume = s3c24xx_i2c_resume,
.driver = {
.owner = THIS_MODULE,
.name = "s3c2440-i2c",
},
};
static int s3c24xx_i2c_probe(struct platform_device *pdev)
{
struct s3c24xx_i2c *i2c = &s3c24xx_i2c;
struct resource *res;
int ret;
/* find the clock and enable it */
i2c->dev = &pdev->dev;
i2c->clk = clk_get(&pdev->dev, "i2c");
clk_enable(i2c->clk);
/* map the registers */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
i2c->ioarea = request_mem_region(res->start, (res->end-res->start)+1,
pdev->name);
i2c->regs = ioremap(res->start, (res->end-res->start)+1);
// 设置了具体的适配器算法
/* setup info block for the i2c core */
i2c->adap.algo_data = i2c;
i2c->adap.dev.parent = &pdev->dev;
//寄存器 gpio 初始化
/* initialise the i2c controller */
ret = s3c24xx_i2c_init(i2c);
//设置中断函数,中断里执行具体的读写函数
/* find the IRQ for this unit (note, this relies on the init call to
* ensure no current IRQs pending
*/
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
ret = request_irq(res->start, s3c24xx_i2c_irq, IRQF_DISABLED,
pdev->name, i2c);
i2c->irq = res;
//添加adapt
ret = i2c_add_adapter(&i2c->adap);
//pdev.dev.driver_data=i2c
platform_set_drvdata(pdev, i2c);
return 0;
}
i2c_add_adapter
- 设置这个具体的适配器相关的信息
- 添加新的适配器,这个情况下可能有新的client能够挂接到
dev链表 - 调用这个
i2c_driver的attach_adapter
int i2c_add_adapter(struct i2c_adapter *adapter)
{
res = idr_get_new_above(&i2c_adapter_idr, adapter,__i2c_first_dynamic_bus_num, &id);
//调用idr_get_new_above()将结构插入i2c_adapter_idr中,并将插入的位置赋给id,以后可以通过id在i2c_adapter_idr中找到相应的i2c_adapter结构体
i2c_register_adapter(adapter)
}
static int i2c_register_adapter(struct i2c_adapter *adap)
{
int res = 0;
struct list_head *item;
struct i2c_driver *driver;
INIT_LIST_HEAD(&adap->clients);
list_add_tail(&adap->list, &adapters);
// 这个parent 在上面的probe 指向了 资源文件指向的platform_device.dev
/* Add the adapter to the driver core.
* If the parent pointer is not set up,
* we add this adapter to the host bus.
*/
if (adap->dev.parent == NULL) {
adap->dev.parent = &platform_bus;
pr_debug("I2C adapter driver [%s] forgot to specify "
"physical device\n", adap->name);
}
sprintf(adap->dev.bus_id, "i2c-%d", adap->nr);
adap->dev.release = &i2c_adapter_dev_release;
//这里设置了具体的class
adap->dev.class = &i2c_adapter_class;
//注册device 在总线框架中,注册dev 会去寻找driver,执行probe
/* for new style drivers, when registration returns the driver core
* will have called probe() for all matching-but-unbound devices.
*/
res = device_register(&adap->dev);
// 扫描静态的单板外设信息,有个全局链表__i2c_board_list 保存着未添加到链表的
// 想要加入到的client的相关信息,这个后续可以看 linux3.4
// 这里就是根据这个新的适配器添加这个client到链表
/* create pre-declared device nodes for new-style drivers */
if (adap->nr < __i2c_first_dynamic_bus_num)
i2c_scan_static_board_info(adap);
// 遍历这个drivers ,去执行实际驱动i2c_driver 的attach_adapter
/* let legacy drivers scan this bus for matching devices */
list_for_each(item,&drivers) {
driver = list_entry(item, struct i2c_driver, list);
if (driver->attach_adapter)
/* We ignore the return code; if it fails, too bad */
driver->attach_adapter(adap);
}
}
最后执行attach_adapter,这个在后面的设备驱动再分析
硬件操作
硬件操作最后归结到接口master_xfer,I2C的传输到最后可以整理为
- 开始信号
- 结束信号
- ACK/NAK
- 数据传输1字节,读写是根据起始信号决定
在官方的驱动中,使用中断来传输,传输中使用休眠唤醒
//休眠
timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
//完成后唤醒
wake_up(&i2c->wait);
// probe 时候申请中断
request_irq(res->start, s3c24xx_i2c_irq, IRQF_DISABLED,pdev->name, i2c);
设备驱动
参考文件driver/i2c/chips/eeprom.c
入口
static int __init eeprom_init(void)
{
return i2c_add_driver(&eeprom_driver);
}
static inline int i2c_add_driver(struct i2c_driver *driver)
{
return i2c_register_driver(THIS_MODULE, driver);
}
注册
注册的时候会加入驱动到链表,最后执行驱动的attach_adapter
int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
{
int res;
/* add the driver to the list of i2c drivers in the driver core */
driver->driver.owner = owner;
driver->driver.bus = &i2c_bus_type;
//注册driver 会去寻找dev,执行probe
/* for new style drivers, when registration returns the driver core
* will have called probe() for all matching-but-unbound devices.
*/
res = driver_register(&driver->driver);
//添加链表
list_add_tail(&driver->list,&drivers);
//遍历adapt,执行驱动的attach_adapter
//这个和我们最后注册 adapt的时候,遍历 driver 时是差不多的
/* legacy drivers scan i2c busses directly */
if (driver->attach_adapter) {
struct i2c_adapter *adapter;
list_for_each_entry(adapter, &adapters, list) {
driver->attach_adapter(adapter);
}
}
return 0;
}
attach_adapter
这里看下eeprom的是怎样的
static struct i2c_driver eeprom_driver = {
.driver = {
.name = "eeprom",
},
.id = I2C_DRIVERID_EEPROM,
.attach_adapter = eeprom_attach_adapter,
.detach_client = eeprom_detach_client,
};
i2c_probe总结起来就是 使用adapter先去检测地址addr_data,成功后调用eeprom_detect,挂接client,注册我们实际的字符设备驱动等操作
static int eeprom_attach_adapter(struct i2c_adapter *adapter)
{
return i2c_probe(adapter, &addr_data, eeprom_detect);
}
我们这里的地址有以下几种,依次处理Force,probe,normal_i2c,ignore
struct i2c_client_address_data {
unsigned short *normal_i2c;
unsigned short *probe;
unsigned short *ignore;
unsigned short **forces;
};
具体流程如下
int i2c_probe(struct i2c_adapter *adapter,
struct i2c_client_address_data *address_data,
int (*found_proc) (struct i2c_adapter *, int, int))
{
int i, err;
int adap_id = i2c_adapter_id(adapter);
/* Force entries are done first, and are not affected by ignore
entries */
if (address_data->forces) {
unsigned short **forces = address_data->forces;
int kind;
for (kind = 0; forces[kind]; kind++) {
for (i = 0; forces[kind][i] != I2C_CLIENT_END;
i += 2) {
if (forces[kind][i] == adap_id
|| forces[kind][i] == ANY_I2C_BUS) {
dev_dbg(&adapter->dev, "found force "
"parameter for adapter %d, "
"addr 0x%02x, kind %d\n",
adap_id, forces[kind][i + 1],
kind);
err = i2c_probe_address(adapter,
forces[kind][i + 1],
kind, found_proc);
if (err)
return err;
}
}
}
}
/* Stop here if we can't use SMBUS_QUICK */
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
if (address_data->probe[0] == I2C_CLIENT_END
&& address_data->normal_i2c[0] == I2C_CLIENT_END)
return 0;
dev_warn(&adapter->dev, "SMBus Quick command not supported, "
"can't probe for chips\n");
return -1;
}
/* Probe entries are done second, and are not affected by ignore
entries either */
for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) {
if (address_data->probe[i] == adap_id
|| address_data->probe[i] == ANY_I2C_BUS) {
dev_dbg(&adapter->dev, "found probe parameter for "
"adapter %d, addr 0x%02x\n", adap_id,
address_data->probe[i + 1]);
err = i2c_probe_address(adapter,
address_data->probe[i + 1],
-1, found_proc);
if (err)
return err;
}
}
/* Normal entries are done last, unless shadowed by an ignore entry */
for (i = 0; address_data->normal_i2c[i] != I2C_CLIENT_END; i += 1) {
int j, ignore;
ignore = 0;
for (j = 0; address_data->ignore[j] != I2C_CLIENT_END;
j += 2) {
if ((address_data->ignore[j] == adap_id ||
address_data->ignore[j] == ANY_I2C_BUS)
&& address_data->ignore[j + 1]
== address_data->normal_i2c[i]) {
dev_dbg(&adapter->dev, "found ignore "
"parameter for adapter %d, "
"addr 0x%02x\n", adap_id,
address_data->ignore[j + 1]);
ignore = 1;
break;
}
}
if (ignore)
continue;
dev_dbg(&adapter->dev, "found normal entry for adapter %d, "
"addr 0x%02x\n", adap_id,
address_data->normal_i2c[i]);
err = i2c_probe_address(adapter, address_data->normal_i2c[i],
-1, found_proc);
if (err)
return err;
}
return 0;
}
eeprom_detect
我们在这个驱动中的found_proc实际上是eeprom_detect,这里设置client,设置具体的adapt,driver,执行依附
/* This function is called by i2c_probe */
static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
struct eeprom_data *data;
int err = 0;
/* There are three ways we can read the EEPROM data:
(1) I2C block reads (faster, but unsupported by most adapters)
(2) Consecutive byte reads (100% overhead)
(3) Regular byte data reads (200% overhead)
The third method is not implemented by this driver because all
known adapters support at least the second. */
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA
| I2C_FUNC_SMBUS_BYTE))
goto exit;
if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
// 设置client
new_client = &data->client;
memset(data->data, 0xff, EEPROM_SIZE);
i2c_set_clientdata(new_client, data);
new_client->addr = address;
new_client->adapter = adapter;
new_client->driver = &eeprom_driver;
new_client->flags = 0;
/* Fill in the remaining client fields */
strlcpy(new_client->name, "eeprom", I2C_NAME_SIZE);
data->valid = 0;
mutex_init(&data->update_lock);
data->nature = UNKNOWN;
//i2c_client与适配器进行连接
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
goto exit_kfree;
// 这个类似字符设备驱动
/* create the sysfs eeprom file */
err = sysfs_create_bin_file(&new_client->dev.kobj, &eeprom_attr);
}
i2c_attach_client
将i2c_client与适配器进行连接
int i2c_attach_client(struct i2c_client *client)
{
struct i2c_adapter *adapter = client->adapter;
int res = 0;
list_add_tail(&client->list,&adapter->clients);
client->usage_count = 0;
client->dev.parent = &client->adapter->dev;
client->dev.bus = &i2c_bus_type;
if (client->driver)
client->dev.driver = &client->driver->driver;
if (client->driver && !is_newstyle_driver(client->driver)) {
client->dev.release = i2c_client_release;
client->dev.uevent_suppress = 1;
} else
client->dev.release = i2c_client_dev_release;
snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id),
"%d-%04x", i2c_adapter_id(adapter), client->addr);
dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n",
client->name, client->dev.bus_id);
res = device_register(&client->dev);
if (adapter->client_register) {
if (adapter->client_register(client)) {
dev_dbg(&adapter->dev, "client_register "
"failed for client [%s] at 0x%02x\n",
client->name, client->addr);
}
}
}
设备驱动参考代码
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <linux/fs.h>
#include <asm/uaccess.h>
static unsigned short ignore[] = { I2C_CLIENT_END };
static unsigned short normal_addr[] = { 0x50, I2C_CLIENT_END }; /* 地址值是7位 */
/* 改为0x60的话, 由于不存在设备地址为0x60的设备, 所以at24cxx_detect不被调用 */
static unsigned short force_addr[] = {ANY_I2C_BUS, 0x60, I2C_CLIENT_END};
static unsigned short * forces[] = {force_addr, NULL};
static struct i2c_client_address_data addr_data = {
.normal_i2c = normal_addr, /* 要发出S信号和设备地址并得到ACK信号,才能确定存在这个设备 */
.probe = ignore,
.ignore = ignore,
//.forces = forces, /* 强制认为存在这个设备 */
};
static struct i2c_driver at24cxx_driver;
static int major;
static struct class *cls;
struct i2c_client *at24cxx_client;
static ssize_t at24cxx_read(struct file *file, char __user *buf, size_t size, loff_t * offset)
{
unsigned char address;
unsigned char data;
struct i2c_msg msg[2];
int ret;
/* address = buf[0]
* data = buf[1]
*/
if (size != 1)
return -EINVAL;
copy_from_user(&address, buf, 1);
/* 数据传输三要素: 源,目的,长度 */
/* 读AT24CXX时,要先把要读的存储空间的地址发给它 */
msg[0].addr = at24cxx_client->addr; /* 目的 */
msg[0].buf = &address; /* 源 */
msg[0].len = 1; /* 地址=1 byte */
msg[0].flags = 0; /* 表示写 */
/* 然后启动读操作 */
msg[1].addr = at24cxx_client->addr; /* 源 */
msg[1].buf = &data; /* 目的 */
msg[1].len = 1; /* 数据=1 byte */
msg[1].flags = I2C_M_RD; /* 表示读 */
ret = i2c_transfer(at24cxx_client->adapter, msg, 2);
if (ret == 2)
{
copy_to_user(buf, &data, 1);
return 1;
}
else
return -EIO;
}
static ssize_t at24cxx_write(struct file *file, const char __user *buf, size_t size, loff_t *offset)
{
unsigned char val[2];
struct i2c_msg msg[1];
int ret;
/* address = buf[0]
* data = buf[1]
*/
if (size != 2)
return -EINVAL;
copy_from_user(val, buf, 2);
/* 数据传输三要素: 源,目的,长度 */
msg[0].addr = at24cxx_client->addr; /* 目的 */
msg[0].buf = val; /* 源 */
msg[0].len = 2; /* 地址+数据=2 byte */
msg[0].flags = 0; /* 表示写 */
ret = i2c_transfer(at24cxx_client->adapter, msg, 1);
if (ret == 1)
return 2;
else
return -EIO;
}
static struct file_operations at24cxx_fops = {
.owner = THIS_MODULE,
.read = at24cxx_read,
.write = at24cxx_write,
};
static int at24cxx_detect(struct i2c_adapter *adapter, int address, int kind)
{
printk("at24cxx_detect\n");
/* 构构一个i2c_client结构体: 以后收改数据时会用到它 */
at24cxx_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
at24cxx_client->addr = address;
at24cxx_client->adapter = adapter;
at24cxx_client->driver = &at24cxx_driver;
strcpy(at24cxx_client->name, "at24cxx");
i2c_attach_client(at24cxx_client);
major = register_chrdev(0, "at24cxx", &at24cxx_fops);
cls = class_create(THIS_MODULE, "at24cxx");
class_device_create(cls, NULL, MKDEV(major, 0), NULL, "at24cxx"); /* /dev/at24cxx */
return 0;
}
static int at24cxx_attach(struct i2c_adapter *adapter)
{
return i2c_probe(adapter, &addr_data, at24cxx_detect);
}
static int at24cxx_detach(struct i2c_client *client)
{
printk("at24cxx_detach\n");
class_device_destroy(cls, MKDEV(major, 0));
class_destroy(cls);
unregister_chrdev(major, "at24cxx");
i2c_detach_client(client);
kfree(i2c_get_clientdata(client));
return 0;
}
/* 1. 分配一个i2c_driver结构体 */
/* 2. 设置i2c_driver结构体 */
static struct i2c_driver at24cxx_driver = {
.driver = {
.name = "at24cxx",
},
.attach_adapter = at24cxx_attach,
.detach_client = at24cxx_detach,
};
static int at24cxx_init(void)
{
i2c_add_driver(&at24cxx_driver);
return 0;
}
static void at24cxx_exit(void)
{
i2c_del_driver(&at24cxx_driver);
}
module_init(at24cxx_init);
module_exit(at24cxx_exit);
MODULE_LICENSE("GPL");
