10gR2 RAC Install issues on Oracle EL5 or RHEL5 or SLES10 (VIPCA /SRVCTL / OUI Failures) [ID 414163.1]
|
10gR2 RAC Install issues on Oracle EL5 or RHEL5 or SLES10 (VIPCA / SRVCTL / OUI Failures) [ID 414163.1] |
||
|
|
||
|
|
Modified 04-AUG-2010 Type PROBLEM Status ARCHIVED |
|
In this Document
Symptoms
Cause
Solution
References
Applies to:
Oracle Server - Enterprise Edition - Version: 10.2.0.1 to 10.2.0.3 - Release: 10.2 to 10.2
Linux x86
Generic Linux
Linux x86-64
***Checked for relevance on 04-Aug-2010***
When installing 10gR2 RAC on Oracle Enterprise Linux 5 or RHEL5 or SLES10 there are three issues that users must be aware of.
Issue#1: To install 10gR2, you must first install the base release, which is 10.2.0.1. As these version of OS are newer, you should use the following command to invoke the installer:
$ runInstaller -ignoreSysPrereqs // This will bypass the OS check //
Issue#2: At end of root.sh on the last node vipca will fail to run with the following error:
Oracle CRS stack installed and running under init(1M)Running vipca(silent) for configuring nodeapps/home/oracle/crs/oracle/product/10/crs/jdk/jre//bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
Also, srvctl will show similar output if workaround below is not implemented.
Issue#3: After working around Issue#2 above, vipca will fail to run with the following error if the VIP IP's are in a non-routable range [10.x.x.x, 172.(16-31).x.x or 192.168.x.x]:
# vipcaError 0(Native: listNetInterfaces:[3]) [Error 0(Native: listNetInterfaces:[3])]
These releases of the Linux kernel fix an old bug in the Linux threading that Oracle worked around using LD_ASSUME_KERNEL settings in both vipca and srvctl, this workaround is no longer valid on OEL5 or RHEL5 or SLES10 hence the failures.
If you have not yet run root.sh on the last node, implement workaround for issue#2 below and run root.sh (you may skip running the vipca portion at the bottom of this note).
If you have a non-routable IP range for VIPs you will also need workaround for issue# 3 and then run vipca manually.
To workaround Issue#2 above, edit vipca (in the CRS bin directory on all nodes) to undo the setting of LD_ASSUME_KERNEL. After the IF statement around line 120 add an unset command to ensure LD_ASSUME_KERNEL is not set as follows:
if [ "$arch" = "i686" -o "$arch" = "ia64" -o "$arch" = "x86_64" ]then LD_ASSUME_KERNEL=2.4.19 export LD_ASSUME_KERNELfi
unset LD_ASSUME_KERNEL <<<== Line to be added
Similarly for srvctl (in both the CRS and, when installed, RDBMS and ASM bin directories on all nodes), unset LD_ASSUME_KERNEL by adding one line, around line 168 should look like this:
LD_ASSUME_KERNEL=2.4.19export LD_ASSUME_KERNEL
unset LD_ASSUME_KERNEL <<<== Line to be added
Remember to re-edit these files on all nodes:
<CRS_HOME>/bin/vipca
<CRS_HOME>/bin/srvctl
<RDBMS_HOME>/bin/srvctl
<ASM_HOME>/bin/srvctl
after applying the 10.2.0.2 or 10.2.0.3 patchsets, as these patchset will still include those settings unnecessary for OEL5 or RHEL5 or SLES10. This issue was raised with development and is fixed in the 10.2.0.4 patchsets.
Note that we are explicitly unsetting LD_ASSUME_KERNEL and not merely commenting out its setting to handle a case where the user has it set in their environment (login shell).
To workaround issue#3 (vipca failing on non-routable VIP IP ranges, manually or during root.sh), if you still have the OUI window open, click OK and it will create the "oifcfg" information, then cluvfy will fail due to vipca not completed successfully, skip below in this note and run vipca manually then return to the installer and cluvfy will succeed. Otherwise you may configure the interfaces for RAC manually using the oifcfg command as root, like in the following example (from any node):
<CRS_HOME>/bin # ./oifcfg setif -global eth0/192.168.1.0:public <CRS_HOME>/bin # ./oifcfg setif -global eth1/10.10.10.0:cluster_interconnect <CRS_HOME>/bin # ./oifcfg getif eth0 192.168.1.0 global public eth1 10.10.10.0 global cluster_interconnect
The goal is to get the output of "oifcfg getif" to include both public and cluster_interconnect interfaces, of course you should exchange your own IP addresses and interface name from your environment. To get the proper IPs in your environment run this command:
<CRS_HOME>/bin # ./oifcfg iflisteth0 192.168.1.0eth1 10.10.10.0
If you have not yet run root.sh on the last node, implement workaround for issue #2 above and run root.sh (you may skip running the vipca portion below. If you have a non-routable IP range for VIPs you will also need workaround for issue# 3 above, and then run vipca manually.
Running VIPCA:
After implementing the above workaround(s), you should be able invoke vipca (as root, from last node) manually and configure the VIP IPs via the GUI interface.
<CRS_HOME>/bin # export DISPLAY=<x-display:0><CRS_HOME>/bin # ./vipca
Make sure the DISPLAY environment variable is set correctly and you can open X-clock or other X applications from that shell.
Once vipca completes running, all the Clusterware resources (VIP, GSD, ONS) will be started, there is no need to re-run root.sh since vipca is the last step in root.sh.
To verify the Clusterware resources are running correctly:
<CRS_HOME>/bin # ./crs_stat -tName Type Target State Host ------------------------------------------------------------ora....ux1.gsd application ONLINE ONLINE raclinux1 ora....ux1.ons application ONLINE ONLINE raclinux1 ora....ux1.vip application ONLINE ONLINE raclinux1ora....ux2.gsd application ONLINE ONLINE raclinux2ora....ux2.ons application ONLINE ONLINE raclinux2ora....ux2.vip application ONLINE ONLINE raclinux2
You may now proceed with the rest of the RAC installation.
------------------------------------------------------------------------------
Blog： http://blog.csdn.net/tianlesoftware
网上资源： http://tianlesoftware.download.csdn.net
相关视频：http://blog.csdn.net/tianlesoftware/archive/2009/11/27/4886500.aspx
DBA1 群：62697716(满); DBA2 群：62697977(满)
DBA3 群：62697850 DBA 超级群：63306533;
聊天 群：40132017
--加群需要在备注说明Oracle表空间和数据文件的关系，否则拒绝申请
