SQL server 批量数据库还原

今天接到老板布置的任务，要还原sqlserver数据库。

就在网上查资料。脚本的原链接找不到啦，如果需要删除请私信联系。

以下就是批量还原数据库的全过程，亲测有效！！！

一共就两步：部署存储过程、执行sql语句 。完成

 

第一步：部署三个存储过程

1.

Use master
GO
/*=================Usp_RestoreMuiteDataBaseFromPath========================
=====Restore Mutite DataBase File From a Path ======
=====Ken.Guo ======
=====2010.9.10 ======
=====Version: 2005 & 2008 SQL Server ======
=====EXEC Usp_RestoreMuiteDataBaseFromPath 'D:\databack','',0 ======
=========================================================================
*/
CREATE PROC Usp_RestoreMuiteDataBaseFromPath
( @DatabBaseBakPath nvarchar(400)
,@RestoreDataPath nvarchar(400)='' --RESTORE DATABASE PATH
,@IsRun smallint=0 -- 0 PRINT 1 run
)
AS
BEGIN
set nocount on
DECLARE @BackUpFileName nvarchar(200)
,@DbName nvarchar(200)
,@errorinfo nvarchar(400)

IF not exists(SELECT 1
FROM master.sys.procedures WITH(NOLOCK)
WHERE
name=N'Usp_RestoreDataBaseFormPath'

)
begin
Raiserror 50001 N'找不到存储过程SP_RestoreDataBaseFormPath '
Goto ExitFLag
end

--add path \
if (@DatabBaseBakPath is not null) and len(@DatabBaseBakPath)>1
and (right(@DatabBaseBakPath,1)<>'\')
set @DatabBaseBakPath=@DatabBaseBakPath+'\'
--Check Restore Path and Size >1000M
DECLARE @checkdrive int
SET @checkdrive=1
EXEC master.dbo.Usp_Check_DriveExists @RestoreDataPath,@checkdrive OUTPUT
IF(@checkdrive<>1)
Goto ExitFLag

DECLARE @Dir TABLE
(
BackDBFileName nvarchar(100)
,DEPTH int
,[File] int
)
INSERT INTO @Dir EXEC xp_dirtree @DatabBaseBakPath
,1
,1
DELETE FROM @Dir
WHERE charindex('.bak',BackDBFileName)=0
if not exists (select top 1 1 from @Dir)
begin
Raiserror 50001 N'在提供的路径下没有找到合符要求的备份文件'
Goto ExitFLag
end
declare db_file Cursor Local Static Read_Only Forward_Only
for
select BackDBFileName from @Dir
Open db_file
Fetch Next from db_file into @BackUpFileName
while @@FETCH_STATUS=0
begin
--Restore DataBase
set @BackUpFileName=@DatabBaseBakPath+@BackUpFileName
exec master.dbo.Usp_RestoreDataBaseFormPath @BackUpFileName,@RestoreDataPath,@IsRun
Fetch Next from db_file into @BackUpFileName
end
Close db_file
deallocate db_file
ExitFLag:
set nocount off
end

 

2.

Use master
GO
/*=================Check Restore Path Drives Exists==========================
=====Ken.Guo ======
=====2010.9.10 ======
=====EXEC Usp_Check_DriveExists @RestoreDataPath,@ResultCount OUTPUT ======
===========================================================================
*/
CREATE PROC Usp_Check_DriveExists(
@RestoreDataPath nvarchar(200)
,@ResultCount int OUTPUT)
AS
BEGIN
--Check Restore Path and Size >1000M
if CHARINDEX(':',@RestoreDataPath)>0
begin
DECLARE @Drive nvarchar(10)
,@errorinfo nvarchar(500)

DECLARE @DriveList TABLE
(
Drive nvarchar(10)
,DSize bigint
)
INSERT INTO @DriveList
EXEC master.dbo.xp_fixeddrives

SET @Drive=Left(@RestoreDataPath,CHARINDEX(':',@RestoreDataPath)-1)
if not exists(SELECT
*
FROM @DriveList
WHERE
Drive=@Drive
AND DSize>1024

)
begin
set @errorinfo=N'找不到还原磁盘:'+@Drive+N' ，或者磁盘剩余空间小于1G'
RAISERROR 50001 @errorinfo
set @ResultCount=0
return
end
end
else if(LEN(@RestoreDataPath)>1) AND CHARINDEX(':',@RestoreDataPath)=0
begin
set @errorinfo=N'还原路径错误:'+@RestoreDataPath+N'，必须包含":" 号'
Raiserror 50001 @errorinfo
set @ResultCount= 0
return
end
set @ResultCount= 1
end
GO

 

3.

Use master
GO
/*=================Usp_RestoreDataBaseFormPath=======================================
=====Restore Single DataBase From a Back File ======
=====Ken.Guo ======
=====2010.9.10 ======
=====Version: 2005 & 2008 SQL Server ======
=====Usp_RestoreDataBaseFormPath 'D:\databack\dbcenter.bak','D:\Data',0 ======
=====Key Point Info: ======
--Restore HeaderOnly from disk='D:\data\xx.bak'
--Restore FileListOnly from disk='D:\data\xx.bak'
===================================================================================
*/
CREATE PROC Usp_RestoreDataBaseFormPath
(@DatabBaseBakPath nvarchar(400),
@RestoreDataPath nvarchar(400)='', --RESTORE DATABASE PATH
@IsRun smallint=0 -- 0 PRINT 1 run
)
AS
BEGIN
set nocount on

declare @dbname nvarchar(200),@SQL nvarchar(4000),@DirSQL nvarchar(1000),@errorinfo nvarchar(300)
--add path \
if (@RestoreDataPath is not null) and len(@RestoreDataPath)>1
and (right(@RestoreDataPath,1)<>'\')
set @RestoreDataPath=@RestoreDataPath+'\'
declare @checkdrive int
set @checkdrive=1
exec master.dbo.Usp_Check_DriveExists @RestoreDataPath,@checkdrive output
if(@checkdrive<>1)
Goto ExitFLag
DECLARE @BakFileList TABLE
( LogicalName nvarchar(128)
,PhysicalName nvarchar(260)
)
DECLARE @BakHeaderInfo TABLE
(
DatabaseName nvarchar(128)
)
if Charindex('Microsoft SQL Server 2008',@@VERSION)>0
begin
--SQL Server 2008
DECLARE @BakFileList2008 TABLE
( LogicalName nvarchar(128)
,PhysicalName nvarchar(260)
,Type char(1)
,FileGroupName nvarchar(128)
,SIZE numeric(20,0)
,MaxSize numeric(20,0)
,FileID bigint
,CreateLSN numeric(25,0)
,DropLSN numeric(25,0) NULL
,UniqueID uniqueidentifier
,ReadOnlyLSN numeric(25,0) NULL
,ReadWriteLSN numeric(25,0) NULL
,BackupSizeInBytes bigint
,SourceBlockSize int
,FileGroupID int
,LogGroupGUID uniqueidentifier NULL
,DifferentialBaseLSN numeric(25,0) NULL
,DifferentialBaseGUID uniqueidentifier
,IsReadOnly bit
,IsPresent bit
,TDEThumbprint varbinary(32)
)

INSERT INTO @BakFileList2008
EXEC sp_executesql N'Restore FileListOnly From Disk=@DatabBaseBakPath',N'@DatabBaseBakPath nvarchar(260)',@DatabBaseBakPath
DECLARE @BakHeaderInfo2008 TABLE
(
BackupName nvarchar(128)
,BackupDescription nvarchar(255)
,BackupType smallint
,ExpirationDate datetime
,Compressed tinyint
,POSITION smallint
,DeviceType tinyint
,UserName nvarchar(128)
,ServerName nvarchar(128)
,DatabaseName nvarchar(128)
,DatabaseVersion int
,DatabaseCreationDate datetime
,BackupSize numeric(20,0)
,FirstLSN numeric(25,0)
,LastLSN numeric(25,0)
,CheckpointLSN numeric(25,0)
,DatabaseBackupLSN numeric(25,0)
,BackupStartDate datetime
,BackupFinishDate datetime
,SortOrder smallint
,CodePage smallint
,UnicodeLocaleId int
,UnicodeComparisonStyle int
,CompatibilityLevel tinyint
,SoftwareVendorId int
,SoftwareVersionMajor int
,SoftwareVersionMinor int
,SoftwareVersionBuild int
,MachineName nvarchar(128)
,Flags int
,BindingID uniqueidentifier
,RecoveryForkID uniqueidentifier
,COLLATION nvarchar(128)
,FamilyGUID uniqueidentifier
,HasBulkLoggedData bit
,IsSnapshot bit
,IsReadOnly bit
,IsSingleUser bit
,HasBackupChecksums bit
,IsDamaged bit
,BeginsLogChain bit
,HasIncompleteMetaData bit
,IsForceOffline bit
,IsCopyOnly bit
,FirstRecoveryForkID uniqueidentifier
,ForkPointLSN numeric(25,0) NULL
,RecoveryModel nvarchar(60)
,DifferentialBaseLSN numeric(25,0) NULL
,DifferentialBaseGUID uniqueidentifier
,BackupTypeDescription nvarchar(60)
,BackupSetGUID uniqueidentifier NULL
,CompressedBackupSize numeric(20,0)
)
INSERT INTO @BakHeaderInfo2008
EXEC sp_executesql N'Restore HeaderOnly From Disk=@DatabBaseBakPath',N'@DatabBaseBakPath nvarchar(260)',@DatabBaseBakPath

insert into @BakHeaderInfo(DatabaseName)
select DatabaseName from @BakHeaderInfo2008
insert into @BakFileList(LogicalName ,PhysicalName)
select LogicalName ,PhysicalName from @BakFileList2008
end
else
begin
--SQL Server 2005
DECLARE @BakFileList2005 TABLE
(
LogicalName nvarchar(128)
,PhysicalName nvarchar(260)
,Type char(1)
,FileGroupName nvarchar(128)
,SIZE numeric(20,0)
,MaxSize numeric(20,0)
,FileID bigint
,CreateLSN numeric(25,0)
,DropLSN numeric(25,0) NULL
,UniqueID uniqueidentifier
,ReadOnlyLSN numeric(25,0) NULL
,ReadWriteLSN numeric(25,0) NULL
,BackupSizeInBytes bigint
,SourceBlockSize int
,FileGroupID int
,LogGroupGUID uniqueidentifier NULL
,DifferentialBaseLSN numeric(25,0) NULL
,DifferentialBaseGUID uniqueidentifier
,IsReadOnly bit
,IsPresent bit
)
INSERT INTO @BakFileList2005
EXEC sp_executesql N'Restore FileListOnly From Disk=@DatabBaseBakPath',N'@DatabBaseBakPath nvarchar(260)',@DatabBaseBakPath

DECLARE @BakHeaderInfo2005 TABLE
(
BackupName nvarchar(128)
,BackupDescription nvarchar(255)
,BackupType smallint
,ExpirationDate datetime
,Compressed tinyint
,POSITION smallint
,DeviceType tinyint
,UserName nvarchar(128)
,ServerName nvarchar(128)
,DatabaseName nvarchar(128)
,DatabaseVersion int
,DatabaseCreationDate datetime
,BackupSize numeric(20,0)
,FirstLSN numeric(25,0)
,LastLSN numeric(25,0)
,CheckpointLSN numeric(25,0)
,DatabaseBackupLSN numeric(25,0)
,BackupStartDate datetime
,BackupFinishDate datetime
,SortOrder smallint
,CodePage smallint
,UnicodeLocaleId int
,UnicodeComparisonStyle int
,CompatibilityLevel tinyint
,SoftwareVendorId int
,SoftwareVersionMajor int
,SoftwareVersionMinor int
,SoftwareVersionBuild int
,MachineName nvarchar(128)
,Flags int
,BindingID uniqueidentifier
,RecoveryForkID uniqueidentifier
,COLLATION nvarchar(128)
,FamilyGUID uniqueidentifier
,HasBulkLoggedData bit
,IsSnapshot bit
,IsReadOnly bit
,IsSingleUser bit
,HasBackupChecksums bit
,IsDamaged bit
,BeginsLogChain bit
,HasIncompleteMetaData bit
,IsForceOffline bit
,IsCopyOnly bit
,FirstRecoveryForkID uniqueidentifier
,ForkPointLSN numeric(25,0) NULL
,RecoveryModel nvarchar(60)
,DifferentialBaseLSN numeric(25,0) NULL
,DifferentialBaseGUID uniqueidentifier
,BackupTypeDescription nvarchar(60)
,BackupSetGUID uniqueidentifier NULL
)
INSERT INTO @BakHeaderInfo2005
EXEC sp_executesql N'Restore HeaderOnly From Disk=@DatabBaseBakPath',N'@DatabBaseBakPath nvarchar(260)',@DatabBaseBakPath
insert into @BakHeaderInfo(DatabaseName)
select DatabaseName from @BakHeaderInfo2005
insert into @BakFileList(LogicalName ,PhysicalName)
select LogicalName ,PhysicalName from @BakFileList2005
end
--Check back file info
if not exists (select 1 from @BakFileList) OR not exists (select 1 from @BakHeaderInfo)
begin
set @errorinfo=N'取不到备份文件:'+@DatabBaseBakPath+N' 的信息，请检查备份文件是否正确或者版本是否兼容'
Raiserror 50001 @errorinfo
Goto ExitFLag
end
--Get DataBase Name
SELECT TOP 1 @dbname=databasename FROM @BakHeaderInfo
if exists (select 1 from master.sys.databases with(nolock) where name=@dbname)
begin

set @errorinfo=N'数据库：'+@dbname+N'已经存在，不能还原'
Raiserror 50001 @errorinfo
Goto ExitFLag
end
DECLARE @LogicalName nvarchar(200),@PhysicalName nvarchar(400)
,@pos int ,@endpos int,@LastPhysicalName nvarchar(400)
DECLARE db_file CURSOR
LOCAL
READ_ONLY
FORWARD_ONLY
STATIC
FOR
SELECT
LogicalName
,PhysicalName
FROM @BakFileList
OPEN db_file
set @DirSQL=''
set @SQL=+N'RESTORE DATABASE '+QUOTENAME(@dbname)+' from disk=N'''+@DatabBaseBakPath+''''
set @SQL=@SQL+char(13)+Char(10)+N' WITH FILE=1 '
FETCH NEXT FROM db_file INTO @LogicalName,@PhysicalName
WHILE @@FETCH_STATUS=0
begin
---Get DB PhysicalName
set @endpos=0
while CHARINDEX('\',@PhysicalName)>0
begin
set @pos=CHARINDEX('\',@PhysicalName,@endpos)
if(@pos=0)
break;
set @endpos=@pos+1;
end

--create new db path
if(len(@RestoreDataPath)>1)
begin
set @PhysicalName=@RestoreDataPath+@dbname+'\'+SUBSTRING(@PhysicalName,@endpos,LEN(@PhysicalName)-@endpos+1)
set @DirSQL=N'EXEC master.sys.xp_create_subdir N'''+@RestoreDataPath+@dbname+''''
END
else
begin
if len(@DirSQL)<1 OR (SUBSTRING(@PhysicalName,1,@endpos-1)<>@LastPhysicalName)
if(len(@DirSQL)<1)
set @DirSQL=N'EXEC master.sys.xp_create_subdir N'''+SUBSTRING(@PhysicalName,1,@endpos-1)+''''
else
set @DirSQL=@DirSQL+char(13)+N'EXEC master.sys.xp_create_subdir N'''+SUBSTRING(@PhysicalName,1,@endpos-1)+''''

---Check Drives
set @checkdrive=1
exec master.dbo.Usp_Check_DriveExists @PhysicalName,@checkdrive output
if(@checkdrive<>1)
Goto ExitFLag
set @LastPhysicalName=SUBSTRING(@PhysicalName,1,@endpos-1);
END

set @SQL=@SQL+char(13)+Char(10)+N' ,Move N'''+@LogicalName+''''+' TO N'''+@PhysicalName+''''

FETCH NEXT FROM db_file INTO @LogicalName,@PhysicalName
end
set @SQL=@SQL+char(13)+Char(10)+N' ,NOUNLOAD,Recovery,STATS = 10'
if(@IsRun=0)
print( @DirSQL+char(13)+char(10)+'GO'+char(13)+Char(10)+@SQL+char(13))
else
begin
print('-----------Begin Restore Database:'+@dbname+'------------------')
exec(@DirSQL)
exec(@SQL)
print('-----------End Restore Database:'+@dbname+'---------------------'+char(13))
end

close db_file
deallocate db_file

ExitFLag:
set nocount off
end

 

第二步：调用存储过程生成批量还原数据库的sql语句

1.

EXEC Usp_RestoreMuiteDataBaseFromPath @DatabBaseBakPath = N'备份文件所在路径，路径下都为.bak文件',

@RestoreDataPath = N'数据库还原路径，数据库mdf及ldf文件存放位置'

2.执行第二步第一条得到的语句即可批量还原数据库