世界太小，仍没走遍；世界太大，依然偶遇

centos7部署posgresql和kong总结

　　之前在macos系统测试安装psql和kong，但是实际环境中，大部分是部署在linux服务器上。下面记录了在centos7上部署postgresql和kong的总结以及遇到的一些问题的解决。

查看centos版本：

$ cat /etc/redhat-release
CentOS Linux release 7.2.1511 (Core)

部署版本：

kong: v0.13.1

postgresql: v10.4 (注意：psql版本必须与kong版本对应)

安装依赖包

安装gcc编译环境

$ sudo yum install -y gcc gcc-c++

pcre安装

pcre(Perl Compatible Regular Expressions) 是一个 Perl 库，包括 perl 兼容的正则表达式，nginx 的 http 库使用 pcre 解析正则表达式。

$ sudo yum install -y pcre pcre-devel

zlib安装

zlib 库提供多种压缩和加压缩的方式。
$ sudo yum install -y zlib zlib-devel

openssl安装

openssl 是一个请打的安全套接字层密码库，囊括主要的密码算法、常用的密钥和证书封装管理功能及 SSL 协议

$ sudo yum install -y openssl openssl-devel

postgresql 部署

　　PostgreSQL是完全由社区驱动的开源项目，由全世界超过1000名贡献者所维护。它提供了单个完整功能的版本。可靠性是PostgreSQL的最高优先级。Kong 默认使用 postgresql 作为数据库。
　　这里安装kong的版本是0.13，对应的psql版本需要在v10+，否则启动kong会报下面的错：
$  /usr/local/bin/kong start
2018/06/08 12:07:55 [warn] postgres database 'kong' is missing migration: (response-transformer) 2016-05-04-160000_resp_trans_schema_changes
Error: /usr/local/share/lua/5.1/kong/cmd/start.lua:34: [postgres error] the current database schema does not match this version of Kong. Please run `kong migrations up` to update/initialize the database schema. Be aware that Kong migrations should only run from a single node, and that nodes running migrations concurrently will conflict with each other and might corrupt your database schema!

安装psql-10

$ sudo yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-latest-x86_64/pgdg-centos10-10-2.noarch.rpm
$ sudo  yum install -y postgresql10-server postgresql10-contrib

初始化数据库

$ sudo /usr/pgsql-10/bin/postgresql-10-setup initdb
Initializing database ... OK

设置成centos7开机自启动

sudo systemctl enable postgresql-10.service

启动postgresql服务

# 启动服务
$ sudo systemctl start postgresql-10.service
# 查看psql运行状态
$ sudo systemctl status postgresql-10.service
● postgresql-10.service - PostgreSQL 10 database server
   Loaded: loaded (/usr/lib/systemd/system/postgresql-10.service; disabled; vendor preset: disabled)
   Active: active (running) since Fri 2018-06-08 12:22:17 CST; 16s ago
     Docs: https://www.postgresql.org/docs/10/static/
  Process: 12951 ExecStartPre=/usr/pgsql-10/bin/postgresql-10-check-db-dir ${PGDATA} (code=exited, status=0/SUCCESS)
 Main PID: 12957 (postmaster)
   CGroup: /system.slice/postgresql-10.service
           ├─12957 /usr/pgsql-10/bin/postmaster -D /var/lib/pgsql/10/data/
           ├─12959 postgres: logger process
           ├─12961 postgres: checkpointer process
           ├─12962 postgres: writer process
           ├─12963 postgres: wal writer process
           ├─12964 postgres: autovacuum launcher process
           ├─12965 postgres: stats collector process
           └─12966 postgres: bgworker: logical replication launcher

Jun 08 12:22:17 172-18-38-219 systemd[1]: Starting PostgreSQL 10 database server...
Jun 08 12:22:17 172-18-38-219 postmaster[12957]: 2018-06-08 12:22:17.798 CST [12957] LOG:  listeni...432
Jun 08 12:22:17 172-18-38-219 postmaster[12957]: 2018-06-08 12:22:17.798 CST [12957] LOG:  could n...ess
Jun 08 12:22:17 172-18-38-219 postmaster[12957]: 2018-06-08 12:22:17.798 CST [12957] HINT:  Is ano...ry.
Jun 08 12:22:17 172-18-38-219 postmaster[12957]: 2018-06-08 12:22:17.801 CST [12957] LOG:  listeni...32"
Jun 08 12:22:17 172-18-38-219 postmaster[12957]: 2018-06-08 12:22:17.808 CST [12957] LOG:  listeni...32"
Jun 08 12:22:17 172-18-38-219 postmaster[12957]: 2018-06-08 12:22:17.825 CST [12957] LOG:  redirec...ess
Jun 08 12:22:17 172-18-38-219 postmaster[12957]: 2018-06-08 12:22:17.825 CST [12957] HINT:  Future...g".
Jun 08 12:22:17 172-18-38-219 systemd[1]: Started PostgreSQL 10 database server.
Hint: Some lines were ellipsized, use -l to show in full.

Postgresql配置

执行完初始化任务之后，postgresql 会自动创建和生成两个用户和一个数据库：
　　linux 系统用户 postgres：管理数据库的系统用户；
　　postgresql 用户 postgres：数据库超级管理员；
　　数据库 postgres：用户 postgres 的默认数据库；
　　密码由于是默认生成的，需要在系统中修改一下。

修改初始密码

$ passwd postgres
Changing password for user postgres.
New password:
BAD PASSWORD: The password contains the user name in some form
Retype new password:
passwd: all authentication tokens updated successfully.

创建用户

为了安全以及满足 Kong 初始化的需求，需要在建立一个 postgre 用户 kong 和对应的 linux 用户 kong，并新建数据库 kong。

# 新建 linux kong 用户
$ sudo adduser kong

# 使用管理员账号登录 psql 创建用户和数据库
# 切换 postgres 用户
# 切换 postgres 用户后，提示符变成 `-bash-4.3$` 
$ su postgres

# 进入psql控制台，此时会进入到控制台（系统提示符变为'postgres=#'）
bash-4.3$ psql
could not change directory to "/root": Permission denied
psql (10.4)
Type "help" for help.

#为管理员用户postgres修改密码，之前改过了这里就不用改了
postgres=# password postgres

#建立新的数据库用户（和之前建立的系统用户要一样）
postgres=# create user kong with password 'kong';
CREATE ROLE

#为新用户建立数据库
postgres=# create database kong owner kong;
CREATE DATABASE

#把新建的数据库权限赋予 kong
postgres=# grant all privileges on database kong to kong;
GRANT

#退出控制台
postgres=# \q
bash-4.3$

注意：在 psql 控制台下执行命令，一定记得在命令后添加分号。

而且postgresql的用户要和系统用户一样：

$ cat /etc/passwd
...
postgres:x:26:26:PostgreSQL Server:/var/lib/pgsql:/bin/bash
kong:x:1002:1002::/home/kong:/bin/bash

问题一：

用命令行登录，在root账户下登录postgresql 数据库会提示权限问题：

$ psql -U kong -d kong -h 127.0.0.1 -p 5432
psql: FATAL:  Ident authentication failed for user "kong"

原因是postgres没有配置对外访问策略。

认证权限配置文件为 /var/lib/pgsql/10/data/pg_hba.conf
常见的四种身份验证为：
　　trust：凡是连接到服务器的，都是可信任的。只需要提供psql用户名，可以没有对应的操作系统同名用户；
　　password 和 md5：对于外部访问，需要提供 psql 用户名和密码。对于本地连接，提供 psql 用户名密码之外，还需要有操作系统访问权。（用操作系统同名用户验证）password 和 md5 的区别就是外部访问时传输的密码是否用 md5 加密；
　　ident：对于外部访问，从 ident 服务器获得客户端操作系统用户名，然后把操作系统作为数据库用户名进行登录对于本地连接，实际上使用了peer；
　　peer：通过客户端操作系统内核来获取当前系统登录的用户名，并作为psql用户名进行登录。
psql 用户必须有同名的操作系统用户名。并且必须以与 psql 同名用户登录 linux 才可以登录 psql 。想用其他用户（例如 root ）登录 psql，修改本地认证方式为 trust 或者 password 即可。
$ vim /var/lib/pgsql/10/data/pg_hba.conf
# 增加如下两条配置
# IPv4 local connections:
host all all 127.0.0.1/32 trust
host all all 0.0.0.0/0 trust
问题二：
通过本地连接会提示拒绝连接，因为pgsql 默认只能通过本地访问，需要开启远程访问。
修改配置文件  var/lib/pgsql/10/data/postgresql.conf ，将 listen_address 设置为 '*'
$ vim var/lib/pgsql/10/data/postgresql.conf

# CONNECTIONS AND AUTHENTICATION
#------------------------------------------------------------------------------

# - Connection Settings -

listen_addresses = '*'             # what IP address(es) to listen on;

修改以上两个配置文件后，重启postgresql服务：

$ sudo systemctl restart postgresql-10.service

$ psql -U kong -d kong -h 127.0.0.1 -p 5432
psql (10.4)
Type "help" for help.

kong=> \l
                             List of databases
   Name    |  Owner   | Encoding  | Collate | Ctype |   Access privileges
-----------+----------+-----------+---------+-------+-----------------------
 kong      | kong     | SQL_ASCII | C       | C     | =Tc/kong             +
           |          |           |         |       | kong=CTc/kong
 postgres  | postgres | SQL_ASCII | C       | C     |
 template0 | postgres | SQL_ASCII | C       | C     | =c/postgres          +
           |          |           |         |       | postgres=CTc/postgres
 template1 | postgres | SQL_ASCII | C       | C     | =c/postgres          +
           |          |           |         |       | postgres=CTc/postgres
(4 rows)

kong=>

相关postgres命令参考：postgres常见命令

kong部署

kong这块按照官网的方法不成功，最终下载了rpm包安装成功的。

安装kong

$ sudo yum install kong-community-edition-0.13.1.el7.noarch.rpm
...
Downloading packages:
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
  Installing : kong-community-edition-0.13.1-1.noarch                                               1/1
  Verifying  : kong-community-edition-0.13.1-1.noarch                                               1/1

Installed:
  kong-community-edition.noarch 0:0.13.1-1

Complete!

修改 kong 的配置文件

默认配置文件位于 /etc/kong/kong.conf.default
sudo cp /etc/kong/kong.conf.default /etc/kong/kong.conf
将之前安装配置好的 postgresql 信息填入 kong 配置文件中：
$ sudo vi /etc/kong/kong.conf
#------------------------------------------------------------------------------
# DATASTORE
#------------------------------------------------------------------------------

# Kong will store all of its data (such as APIs, consumers and plugins) in
# either Cassandra or PostgreSQL.
#
# All Kong nodes belonging to the same cluster must connect themselves to the
# same database.

database = postgres              # Determines which of PostgreSQL or Cassandra
                                 # this node will use as its datastore.
                                 # Accepted values are `postgres` and
                                 # `cassandra`.

pg_host = 127.0.0.1             # The PostgreSQL host to connect to.
pg_port = 5432                  # The port to connect to.
pg_user = kong                  # The username to authenticate if required.
pg_password = kong              # The password to authenticate if required.
pg_database = kong              # The database name to connect to.

ssl = off                       # 如果不希望开放 8443 的 ssl 访问可关闭

初始化数据库表

$ kong migrations up -c  /etc/kong/kong.conf
migrating core for database kong
core migrated up to: 2015-01-12-175310_skeleton
core migrated up to: 2015-01-12-175310_init_schema
core migrated up to: 2015-11-23-817313_nodes
core migrated up to: 2016-02-29-142793_ttls
core migrated up to: 2016-09-05-212515_retries
core migrated up to: 2016-09-16-141423_upstreams
core migrated up to: 2016-12-14-172100_move_ssl_certs_to_core
core migrated up to: 2016-11-11-151900_new_apis_router_1
core migrated up to: 2016-11-11-151900_new_apis_router_2
core migrated up to: 2016-11-11-151900_new_apis_router_3
core migrated up to: 2016-01-25-103600_unique_custom_id
core migrated up to: 2017-01-24-132600_upstream_timeouts
core migrated up to: 2017-01-24-132600_upstream_timeouts_2
core migrated up to: 2017-03-27-132300_anonymous
core migrated up to: 2017-04-18-153000_unique_plugins_id
core migrated up to: 2017-04-18-153000_unique_plugins_id_2
core migrated up to: 2017-05-19-180200_cluster_events
core migrated up to: 2017-05-19-173100_remove_nodes_table
core migrated up to: 2017-06-16-283123_ttl_indexes
core migrated up to: 2017-07-28-225000_balancer_orderlist_remove
core migrated up to: 2017-10-02-173400_apis_created_at_ms_precision
core migrated up to: 2017-11-07-192000_upstream_healthchecks
core migrated up to: 2017-10-27-134100_consistent_hashing_1
core migrated up to: 2017-11-07-192100_upstream_healthchecks_2
core migrated up to: 2017-10-27-134100_consistent_hashing_2
core migrated up to: 2017-09-14-121200_routes_and_services
core migrated up to: 2017-10-25-180700_plugins_routes_and_services
migrating response-transformer for database kong
response-transformer migrated up to: 2016-05-04-160000_resp_trans_schema_changes
migrating ip-restriction for database kong
ip-restriction migrated up to: 2016-05-24-remove-cache
migrating statsd for database kong
statsd migrated up to: 2017-06-09-160000_statsd_schema_changes
migrating jwt for database kong
jwt migrated up to: 2015-06-09-jwt-auth
jwt migrated up to: 2016-03-07-jwt-alg
jwt migrated up to: 2017-05-22-jwt_secret_not_unique
jwt migrated up to: 2017-07-31-120200_jwt-auth_preflight_default
jwt migrated up to: 2017-10-25-211200_jwt_cookie_names_default
migrating cors for database kong
cors migrated up to: 2017-03-14_multiple_orgins
migrating basic-auth for database kong
basic-auth migrated up to: 2015-08-03-132400_init_basicauth
basic-auth migrated up to: 2017-01-25-180400_unique_username
migrating key-auth for database kong
key-auth migrated up to: 2015-07-31-172400_init_keyauth
key-auth migrated up to: 2017-07-31-120200_key-auth_preflight_default
migrating ldap-auth for database kong
ldap-auth migrated up to: 2017-10-23-150900_header_type_default
migrating hmac-auth for database kong
hmac-auth migrated up to: 2015-09-16-132400_init_hmacauth
hmac-auth migrated up to: 2017-06-21-132400_init_hmacauth
migrating datadog for database kong
datadog migrated up to: 2017-06-09-160000_datadog_schema_changes
migrating tcp-log for database kong
tcp-log migrated up to: 2017-12-13-120000_tcp-log_tls
migrating acl for database kong
acl migrated up to: 2015-08-25-841841_init_acl
migrating response-ratelimiting for database kong
response-ratelimiting migrated up to: 2015-08-03-132400_init_response_ratelimiting
response-ratelimiting migrated up to: 2016-08-04-321512_response-rate-limiting_policies
response-ratelimiting migrated up to: 2017-12-19-120000_add_route_and_service_id_to_response_ratelimiting
migrating request-transformer for database kong
request-transformer migrated up to: 2016-05-04-160000_req_trans_schema_changes
migrating rate-limiting for database kong
rate-limiting migrated up to: 2015-08-03-132400_init_ratelimiting
rate-limiting migrated up to: 2016-07-25-471385_ratelimiting_policies
rate-limiting migrated up to: 2017-11-30-120000_add_route_and_service_id
migrating oauth2 for database kong
oauth2 migrated up to: 2015-08-03-132400_init_oauth2
oauth2 migrated up to: 2016-07-15-oauth2_code_credential_id
oauth2 migrated up to: 2016-12-22-283949_serialize_redirect_uri
oauth2 migrated up to: 2016-09-19-oauth2_api_id
oauth2 migrated up to: 2016-12-15-set_global_credentials
oauth2 migrated up to: 2017-04-24-oauth2_client_secret_not_unique
oauth2 migrated up to: 2017-10-19-set_auth_header_name_default
oauth2 migrated up to: 2017-10-11-oauth2_new_refresh_token_ttl_config_value
oauth2 migrated up to: 2018-01-09-oauth2_pg_add_service_id
62 migrations ran

启动kong服务

$ kong start
Kong started

服务已经正常启动

$ curl 127.0.0.1:8001
{"plugins":{"enabled_in_cluster":[],"available_on_server":{"response-transformer":true,"correlation-id":true,"statsd":true,"jwt":true,"cors":true,"basic-auth":true,"key-auth":true,"ldap-auth":true,"http-log":true,"oauth2":true,"hmac-auth":true,"acl":true,"datadog":true,"tcp-log":true,"ip-restriction":true,"request-transformer":true,"file-log":true,"bot-detection":true,"loggly":true,"request-size-limiting":true,"syslog":true,"udp-log":true,"response-ratelimiting":true,"aws-lambda":true,"runscope":true,"rate-limiting":true,"request-termination":true}},"tagline":"Welcome to kong","configuration":{"error_default_type":"text\/plain","client_ssl":false,"lua_ssl_verify_depth":1
....

 

 

posted @ 2018-06-08 23:46  单曲荨环  阅读(3977)  评论(0)  编辑  收藏  举报
好好学习天天向上的女少年