STM8硬件设计注意事项
1、中断
STM8的外部中断和STM32不一样,每个端口PX只有1个中断
2、ADC
1)Additional AIN12 analog input is not selectable in ADC scan mode or with analog watchdog. Values converted from AIN12 are stored only into the ADC_DRH/ADC_DRL
registers
2)关于引脚ADC_ETR的接法
3、电源
作者:会飞的小强
本文版权归作者和博客园共有,欢迎转载,但未经作者同意必须在文章页面给出原文连接,否则保留追究法律责任的权利。