[Advance] How to debug a program (上)

 

Tool GDB

Examining Memory (data or in machine instructions)

You can use the command x (for “examine”) to examine memory in any of several formats, independently of your program's data types.

x/nfu addr

x addr

x

n, the repeat count

The repeat count is a decimal integer; the default is 1. It specifies how much memory (counting by units u) to display.

f, the display format

The display format is one of the formats used by print (`x', `d', `u', `o', `t', `a', `c', `f', `s'), and in addition `i' (for machine instructions). The default is `x' (hexadecimal) initially. The default changes each time you use either x or print.

x -- Print as integer in hexadecimal.

d -- Print as integer in signed decimal.

u -- Print as integer in unsigned decimal.

o -- Print as integer in octal.

t -- Print as integer in binary. The letter `t' stands for “two”. ¹

a -- Print as an address, both absolute in hexadecimal and as an offset from the nearest preceding symbol. You can use this format used to discover where (in what function) an unknown address is located:

          (gdb) p/a 0x54320

          $3 = 0x54320 <_initialize_vx+396>

c -- Regard as an integer and print it as a character constant.

f -- Regard as a floating point number and print using typical floating point syntax.

s --Regard as a string

u, the unit size  -- The unit size is any of

b -- Bytes.

h -- Halfwords (two bytes).

w -- Words (four bytes). This is the initial default.

g -- Giant words (eight bytes).

Each time you specify a unit size with x, that size becomes the default unit the next time you use x. For the `i' format, the unit size is ignored and is normally not written. For the `s' format (string), the unit size defaults to `b', unless it is explicitly given. Use x /hs to display 16-bit char strings and x /ws to display 32-bit strings. The next use of x /s will again display 8-bit strings. Note that the results depend on the programming language of the current compilation unit. If the language is C, the `s' modifier will use the UTF-16 encoding while `w' will use UTF-32. The encoding is set by the programming language and cannot be altered.

Example:

x/4xw $sp -- print the four words (`w') of memory above the stack pointer  in hexadecimal (`x').

x/3uh 0x54320 -- display three halfwords (h) of memory, formatted as unsigned decimal integers (`u'), starting at address 0x54320.

x/5i $pc-6 -- examines machine instructions.

Registers

The names of registers are different for each machine; use info registers to see the names 
used on your machine.

info registers– check register names

gdb four “standard” register:

$pc -- the program counter register, $RIP

$sp -- the stack pointer register, $RSP

$fp -- a pointer to the current stack frame, “base pointer” register, $RBP

$ps -- a register that contains the processor status

Example:

p/x $pc

x/i $pc

GDB conversation

If displaying variable, which is a address, gdb will try to display its content(value) together. 
Format: 

Address:  content(value) 

Example:

(gdb) x/x $pc  -- $pc is a address

0x40071e <_Z3addii+4>:  0x10ec8348

(gdb) x/i $pc

0x40071e <_Z3addii+4>:  sub    $0x10,%rsp

(gdb) x/xg $pc

0x40071e <_Z3addii+4>:  0x89fc7d8910ec8348

(gdb) p $pc – print value of $pc only

$9 = (void (*)()) 0x40071e <add(int, int)+4>

(gdb) p/x $pc

$10 = 0x40071e 

Advance guide for debugging a program

Introduce

Any program only includes data and machine instructions.

Machine instructions: user code(Text), static lib code and shared lib code. We can 
disassemble program at any program memory. 

Data: initialized data, uninitialized data (bss), Heap(malloc arena), stack and registers. 

Commonly, the code(machine instruction) won’t change when running a program. It means 
if we track data, we can know the all program status according to machine instruction. 
This means gdb x command can be a general tool for program debug.

Virtual memory

Modern operating systems and architectures provide virtual memory. Through hardware support and additional code in the operating system, virtual memory allows each user process to act as though it is the only thing running on the computer. It gives each process a completely separate address space.

Through pmap, user can check process' memory map, such as:

$ pmap 23814  # If you don't have pmap installed, use 'cat /proc/23814/maps'

Process memory layout

 

It is for 64-bit systems. On 32-bit systems the shared libraries are usually found at the lowest address, followed by the text segment, then everything else.

The text, or code, segment contains the actual program and any statically linked libraries. On 64-bit systems it generally starts at 0x400000 (32-bit systems like to place it at 0x8047000).

The data and BSS segments come next. The data segment contains all initialized global variables as well as static strings (eg, those used in printf). The BSS, or "block started by segment" region holds all uninitialized global variables (those which by C convention are initialized automatically to 0).

After that comes the heap, where all memory obtained via malloc() is located. The heap grows upwards as more memory is requested.

Then we have any shared libraries such as the loader, libc, malloc, etc.

Finally we have the stack, which it should be noted grows downward as it expands.

Downward-growing stack

Programs use the stack to store temporary, or automatic variables, arguments passed during a function call, and information needed to return to a previous point in the program when a function call is made.

There are also three registers that are important at this point - RBP, RSP, and RIP. RSP is the stack pointer. The stack works just like a LIFO queue with push() and pop() operations. RSP tracks the next available position in this queue.

The stack frame is essentially the region of the stack that is presently active, or that corresponds to the presently executing function. It is pointed to by RBP, the "base pointer," and is used in combination with an offset to reference all local variables. Every time a function is called, RBP is updated to point to its stack frame.  

RIP is the instruction pointer. It holds the address of the instruction that the CPU just loaded and is presently executing.

The diagram above shows a snapshot of the stack for a program that is presently in func1(), which was called from main(). In order for the stack to look this way, some things must have happened when func1() was called. These steps are defined by the C calling convention. [2]

1. The arguments to func1() were pushed onto the stack.
2. func1() was called.
3. RBP was pushed onto the stack.
4. RSP was moved to RBP.
5. Space for the local variables was allocated on the stack.
6. Local variables were set to initial values (if provided).

Steps 3 through 6 are called the function prelude.

图3 带有基指针的栈帧

System calls

The only way to enter supervisor mode is to go through predefined entry points in the kernel. 
One of these points is called a system call.

How system calls work on x86_64 Linux by taking a look at the kernel source, specifically arch/x86_64/kernel/entry.S where we see the following comment...

/*

 * System call entry. Upto 6 arguments in registers are supported.

 *

 * SYSCALL does not save anything on the stack and does not change the

 * stack pointer.

 */

                              

/*

 * Register setup: 

 * rax  system call number

 * rdi  arg0

 * rcx  return address for syscall/sysret, C arg3

 * rsi  arg1

 * rdx  arg2        

 * r10  arg3        (--> moved to rcx for C)

 * r8   arg4

 * r9   arg5

 * r11  eflags for syscall/sysret, temporary for C

 * r12-r15,rbp,rbx saved by C code, not touched.                          

 *

 * Interrupts are off on entry.

 * Only called from user space.

 *

 * XXX   if we had a free scratch register we could save the RSP into the stack frame

 *      and report it properly in ps. Unfortunately we haven't.

 */                                                                     

So to make a system call, you first store the syscall number in RAX, any parameters in RDI, RSI, 
RDX, etc, and then execute the "syscall" instruction.

 

图4 64位模式下通用寄存器的大小和名称

 

图5 在传统和兼容模式下的通用寄存器大小和名称

通用寄存器在编程时通常用于不同的用途，说明如表1所示。

表1 通用寄存器的用途

寄存器名	用途
EAX	累加器
EBX	基址寄存器
ECX	计数器
EDX	数据寄存器
ESI	源地址指针寄存器
EDI	目的地址指针寄存器
EBP	基址指针寄存器
ESP	堆栈指针寄存器

 
待续

参考文献：
Buffer Overflows and You (上)
GDB munual
X86-64构架概述
X86-64处理器构架的应用程序二进制接口