TFS build server搭建，搭建自动化构建服务器

TFS build 服务器的搭建主要步骤如下：

一：环境准备：

1. 新建一台build服务器
2. 安装Visual Studio。主要目的是: a. 生成Build脚本所需要的build命令；b.与TFS组合，方便下载最新源代码
3. 安装TFS。在Build Server触发build时，会通过tfs的命令从源代码服务器下载最新代码
4. 安装InstallShield。通过InstallShield命令自动打包软件包
5. 启动Visual Studio，手动Mapping源代码到build server本地目录。（供源代码下载使用）

二：脚本代码的编写（.bat），以下是bat脚本文件的工作流程

1. 启用Visual Studio tool，这样就可以使用visual studio的命令。
2. 删除本地的所有代码
3. 从服务器下载最新的源代码
4. 开始触发最新源代码的Build
5. 开始触发InstallShield项目的build
6. 把最新生成的软件包.exe上传到某个文件夹备用
7. checkout 项目源代码的版本文件并+1，大于9999则从1重新开始。
8. checkout InstallShield的版本文件并+1
9. checkin 以上两个文件，供下次使用。

三：编写一个计划任务，自动调用步骤二中的.bat脚本，完成build server的搭建

四：代码示例

以下是一个示例，共有两个文件，一个.bat文件，一个vbs文件。

.bat文件是整个build脚本的入口，负责整体build server脚本的流程和大部分的工作

.vbs文件主要是用来取出文件的版本信息；版本信息加1；并把新的版本号重新写入存储版本的文件

下面是这两个文件的代码，部分隐私信息已用*号处理

AutoBuildScript：

@echo off

::Need to manually configure the Path
set VisualStudio2010Tool="C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\vcvarsall.bat" x86
set SourceCodeItemSpecPath="$/Company_1003/Product/dev/EGS/Product/source/Product/App/eProduct/eProduct-1.7.0/CLK/source/eProduct"
set InstallshieldCommandTool="C:\Program Files (x86)\InstallShield\2012\System\IsCmdBld.exe"
set TeamforgeProjectName="eProduct 1.7"
set TeamforgePackage="eProduct 1.7"


::Relative Path, Manually configure if needed
::SourceCodeFolder e.g. "C:\Code\eProduct1.7\eProduct-1.7.0\CLK\source\eProduct"
set SourceCodeFolder=%~f0\..\..\eProduct
set ForceDownloadLatestSourceCode=True
::BuildSolutionFile e.g."C:\Code\eProduct1.7\eProduct-1.7.0\CLK\source\eProduct\2008sln\eProduct.sln"
set BuildSolutionFile=%~f0\..\..\eProduct\2008sln\eProduct.sln
::BuildModel e.g. Debug or Release
set BuildModel=Release
::eProductDriverProject e.g. "C:\Code\eProduct1.7\eProduct-1.7.0\CLK\source\eProduct\ProductNameeProductDriver\ProductNameeProductDriver.ism"
set eProductDriverProject=%~f0\..\..\eProduct\ProductNameeProductDriver\ProductNameeProductDriver.ism
::TeamforgeUploadExecutableFile e.g. "C:\Data\SFEEUploadFiles\UploadFiles.exe"
set TeamforgeUploadExecutableFile=%~f0\..\SFEEUploadFiles\UploadFiles.exe
::DriverReleaseFilePath e.g. "C:\Code\eProduct1.7\eProduct-1.7.0\CLK\source\eProduct\ProductNameeProductDriver\ProductNameeProductDriver\PROJECT_ASSISTANT\Release 1\DiskImages\DISK1"
set DriverReleaseFilePath="%~f0\..\..\eProduct\ProductNameeProductDriver\ProductNameeProductDriver\PROJECT_ASSISTANT\Release 1\DiskImages\DISK1"
::e.g "C:\Code\eProduct1.7\eProduct-1.7.0\CLK\source\eProduct\libfsl\include\version.h"
set VersionFilePath=%~f0\..\..\eProduct\libfsl\include\version.h
::e.g. "C:\Code\eProduct1.7\eProduct-1.7.0\CLK\source\eProduct\ProductNameeProductDriver\ProductNameeProductDriver.ism"
set DriverFilePath=%~f0\..\..\eProduct\ProductNameeProductDriver\ProductNameeProductDriver.ism
::e.g. C:\Code\eProduct1.7\eProduct-1.7.0\CLK\source\eProduct\ProductNameeProductDriver\ProductNameeProductDriver\PROJECT_ASSISTANT\Interm\IsConfig.ini
set DriverConfigFilePath=%~f0\..\..\eProduct\ProductNameeProductDriver\ProductNameeProductDriver\PROJECT_ASSISTANT\Interm\IsConfig.ini
::e.g. C:\Code\eProduct1.7\eProduct-1.7.0\CLK\source\eProduct\Product\2008win32\
set eProductReleaseFilePath=%~f0\..\..\eProduct\Product\2008win32\
set ModifyVersionVBSFilePath=%~f0\..\autoincreaseversionnumber.vbs
set eProductDriverFilesPath=%~f0\..\..\eProduct\ProductNameeProductDriver\eProductDriverFiles
set eProductDriverCreatePath=%~f0\..\..\eProduct\Product\2008win32\Create

@echo on

echo Set the vs 2010 command tool as the default command prompt.
call %VisualStudio2010Tool%

echo Start to download source code from TFS
if not exist %SourceCodeFolder% ( echo please maping the tfs source code to build server local folder 
echo Build Failed.
exit )
echo Delete the old source code 
rd %SourceCodeFolder%/s/q

echo Downloading source code...
IF %ForceDownloadLatestSourceCode% EQU False (tf get %SourceCodeItemSpecPath% /recursive) ELSE (tf get %SourceCodeItemSpecPath% /all /recursive)
echo Download source code Finished.

echo Start Build the solution
MSBuild %BuildSolutionFile% /property:Configuration=%BuildModel% 
echo Build Finished.

echo Start to build Installshield Project
tf checkout %DriverConfigFilePath%

echo Copy files under Create folder to eProduct Driver installer
rd /s /q %eProductDriverFilesPath%
md %eProductDriverFilesPath%
xcopy /E /F /Y  %eProductDriverCreatePath% %eProductDriverFilesPath%

%InstallshieldCommandTool% -p %eProductDriverProject%
echo Build Installshield Project Finished

echo Start checkout and increase version number, then checkin the increased version number

tf checkout %VersionFilePath% %DriverFilePath%

for /f "delims=" %%i in ('cscript //nologo %ModifyVersionVBSFilePath% %VersionFilePath% %DriverFilePath%') do set "d=%%i"
set TeamforgeVersion=%d%

tf checkin %VersionFilePath% %DriverFilePath% /comment:"Build Server New Build on %TeamforgeVersion%" /noprompt /override:"Build Server Checkin"


echo Start to Upload the Image files to Teamforge
set eProductReleaseUploadFile=%eProductReleaseFilePath%eProduct%TeamforgeVersion%.ZIP
if not exist %eProductReleaseUploadFile% ( echo Do not exist %eProductReleaseUploadFile%, maybe build solution failed. 
echo Build Failed.
exit )

if not exist %DriverReleaseFilePath% ( echo Do not exist %DriverReleaseFilePath%, maybe build Driver Disk failed. 
echo Build Failed.
exit )

%TeamforgeUploadExecutableFile% %eProductReleaseUploadFile% %TeamforgeProjectName% %TeamforgePackage% %TeamforgeVersion% "http://sourceforge.is.ad.Company.com/sf-soap43/services" "Cruise_Control" "Mikohn123"
%TeamforgeUploadExecutableFile% %DriverReleaseFilePath% %TeamforgeProjectName% %TeamforgePackage% %TeamforgeVersion% "http://sourceforge.is.ad.Company.com/sf-soap43/services" "Cruise_Control" "Mikohn123"

echo Upload the Image files to Teamforge Finished

echo Build Finished.

exit

 

Auto Increase Version Number:

If Wscript.Arguments.Count <> 2 Then
    WScript.Echo "Arguments Count Error"
    wscript.quit
End If


Set objFS = CreateObject("Scripting.FileSystemObject")
'version.h path
versionFilePath=Wscript.Arguments(0)
'ProductNameeProductDriver.ism path
driverFilePath=Wscript.Arguments(1)


Dim newFileContent
Dim newDriverContent
Dim currentVersion
Dim nextVersion

'Manually configure if needed.
'Below 5 variables is used for search the special version number
'This is used for search the postfix number 888 (e.g. 1.7.0.888)
versionPostfixString="#define Product_INT_VERSION "
'This is used for search the prefix string 1.7.0 (e.g. 1.7.0.888)
versionPrefixString="#define PACKAGE_VERSION " & chr(34)
'This is used for search the Product version number in ism file (e.g. 1.7.0.888)
driverProductVersionPrefixString="        <row><td>ProductVersion</td><td>"
'This is used for search the EProduct version number in ism file (e.g. 1.7.0.888)
driverEProductVersionPrefixString="        <row><td>EProductVERION</td><td>"
'the last charactor in the row (ism file)
driverCommonPostfixString="</td><td/></row>"


' Auto Increase version.h file version number
Set versionFile = objFS.OpenTextFile(versionFilePath)
'Read the lines one by one
Do Until versionFile.AtEndOfStream
    strLine = versionFile.ReadLine
    ' Search if this line has versionPostfixString , Then get the postfix number and set the next number: nextVersionPostfix
    If InStr(strLine,versionPostfixString)> 0 Then
        versionPostfixLength=Len(strLine)-Len(versionPostfixString)
        versionPostfix=Right(strLine,versionPostfixLength)
        nextVersionPostfix=versionPostfix+1
        If nextVersionPostfix>=1000 Then
            nextVersionPostfix=1
        End If
        strLine = Replace(strLine,versionPostfix,nextVersionPostfix)
    End If
    'Search if this line has versionPrefixString
    If InStr(strLine,versionPrefixString)> 0 Then
        versionPrefixLength=Len(strLine)-Len(versionPrefixString)
        versionPrefix=Right(strLine,versionPrefixLength)
        versionPrefix=Left(versionPrefix,versionPrefixLength-1)
    End If
    'Store all the lines to newFileContent, it will be write to the version.h again.
    newFileContent = newFileContent & strLine & vbcrlf
Loop
versionFile.Close

'Write the new content to the version.h
Set versionFile  = objFS.OpenTextFile(versionFilePath,2)
versionFile.Write newFileContent
versionFile.Close

currentVersion=versionPrefix & "." & versionPostfix
nextVersion = versionPrefix & "." & nextVersionPostfix

'Auto increase driver version number
Set driverFile = objFS.OpenTextFile(driverFilePath)
'Read the lines one by one
Do Until driverFile.AtEndOfStream
    strLine = driverFile.ReadLine
    ' Search if this line has driverProductVersionPrefixString
    If InStr(strLine,driverProductVersionPrefixString)> 0 Then
        driverPreProductLength=Len(strLine)-Len(driverProductVersionPrefixString)
        driverLastVersionString=Right(strLine,driverPreProductLength)
        driverProductLength=Len(driverLastVersionString)-Len(driverCommonPostfixString)
        driverLastVersionString=Left(driverLastVersionString,driverProductLength)
        strLine = Replace(strLine,driverLastVersionString,nextVersion)
        
    End If

    'Search if this line has driverEProductVersionPrefixString
    If InStr(strLine,driverEProductVersionPrefixString)> 0 Then
        driverPreEProductLength=Len(strLine)-Len(driverEProductVersionPrefixString)
        driverLastEProductVersionString=Right(strLine,driverPreEProductLength)
        driverEProductLength=Len(driverLastEProductVersionString)-Len(driverCommonPostfixString)
        driverLastEProductVersionString=Left(driverLastEProductVersionString,driverEProductLength)
        
        strLine = Replace(strLine,driverLastEProductVersionString,nextVersion)
    End If
    'Store all the lines to newDriverContent, it will be write to the version.h again.
    newDriverContent = newDriverContent & strLine & vbcrlf

Loop
driverFile.Close

'Write the new content to the driver file
Set driverFile  = objFS.OpenTextFile(driverFilePath,2)
driverFile.Write newDriverContent
driverFile.Close

'This is the file version number, return to the result.
WScript.Echo currentVersion