Data Lake Analytics的Geospatial分析函数
0. 简介
为满足部分客户在云上做Geometry数据的分析需求,阿里云Data Lake Analytics(以下简称:DLA)支持多种格式的地理空间数据处理函数,符合Open Geospatial Consortium’s (OGC) OpenGIS规范,支持的常用数据格式包括:
- WKT
- WKB
- GeoJson
- ESRI Geometry Object Json
- ESRI Shape
DLA采用4326坐标系标准,EPSG 4326使用经纬度坐标,属于地理坐标系。GPS采用的就是这个坐标系。
1. WKT数据
详细描述:
https://en.wikipedia.org/wiki/Well-known_text
http://www.opengeospatial.org/standards/wkt-crs
支持类似如下的WKT相关字符串。
POINT (0 0)
LINESTRING (0 0, 1 1, 1 2)
POLYGON ((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1))
MULTIPOINT (0 0, 1 2)
MULTILINESTRING ((0 0, 1 1, 1 2), (2 3, 3 2, 5 4))
MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))
GEOMETRYCOLLECTION (POINT (2 3), LINESTRING (2 3, 3 4))
2. WKB数据
详细描述:https://en.wikipedia.org/wiki/Well-known_text#Well-known_binary
上述WKT数据和WKB的对应示例:
WKT | WKB |
---|---|
POINT (0 0) | 010100000000000000000000000000000000000000 |
LINESTRING (0 0, 1 1, 1 2) | 01020000000300000000000000000000000000000000000000000000000000F03F000000000000F03F000000000000F03F0000000000000040 |
POLYGON ((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)) | 01030000000200000005000000000000000000000000000000000000000000000000001040000000000000000000000000000010400000000000001040000000000000000000000000000010400000000000000000000000000000000005000000000000000000F03F000000000000F03F000000000000F03F0000000000000040000000000000004000000000000000400000000000000040000000000000F03F000000000000F03F000000000000F03F |
MULTIPOINT (0 0, 1 2) | 0104000000020000000101000000000000000000000000000000000000000101000000000000000000F03F0000000000000040 |
MULTILINESTRING ((0 0, 1 1, 1 2), (2 3, 3 2, 5 4)) | 01050000000200000001020000000300000000000000000000000000000000000000000000000000F03F000000000000F03F000000000000F03F0000000000000040010200000003000000000000000000004000000000000008400000000000000840000000000000004000000000000014400000000000001040 |
MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1))) |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|
GEOMETRYCOLLECTION (POINT (2 3), LINESTRING (2 3, 3 4)) | 0107000000020000000101000000000000000000004000000000000008400102000000020000000000000000000040000000000000084000000000000008400000000000001040 |
3. GeoJson数据
GeoJson的详细描述:http://geojson.org/
4. ESRI Geometry Object Json数据
规范说明:http://resources.esri.com/help/9.3/arcgisserver/apis/REST/geometry.html
5. ESRI Shape二进制数据
规范说明:http://www.esri.com/LIBRARY/WHITEPAPERS/PDFS/SHAPEFILE.PDF
6. 函数列表
Name | Description |
---|---|
ST_asText | 将Geometry数据转成WKT格式的字符串数据。 |
ST_LineFromText | 输入WKT格式的Line字符串数据,生成Line的Geometry数据。 |
ST_Point | 从坐标系的坐标值(X, Y),生成对应的Point的Geometry数据。 |
ST_Polygon | 输入WKT格式的Polygon字符串数据,生成Polygon的Geometry数据。 |
ST_Area | 返回面或多面的面积。对于点、线,返回0.0。对于GeometryCollection,返回所有单个面积的和。 |
ST_GeometryFromText | 输入WKT格式的字符串数据,生成Geometry数据。 |
ST_Buffer | 获取几何对象和距离,然后返回表示围绕源对象的缓冲区的几何对象。 |
ST_Centroid | 获取几何对象的中心点。 |
ST_CoordDim | 返回几何对象的坐标值维度。 |
ST_Dimension | 用于返回几何对象的维度。在这种情况下,维度是指长度和宽度。例如,点既没有长度也没有宽度,所以其维度为 0;而线只有长度却没有宽度,因此其维度为 1。 |
ST_IsClosed | 判断Line或者MultiLine是否闭合。 |
ST_IsEmpty | 判断几何对象是否为空。 |
ST_Length | 计算Line或者MultiLine的长度。 |
ST_XMax | 返回几何对象在坐标系中的最大X坐标值。 |
ST_XMin | 返回几何对象在坐标系中的最小X坐标值。 |
ST_YMax | 返回几何对象在坐标系中的最大Y坐标值。 |
ST_YMin | 返回几何对象在坐标系中的最小Y坐标值。 |
ST_NumInteriorRing | 以Polygon作为输入参数,并返回其内部环数。 |
ST_NumPoints | 用于返回几何对象中的点(折点)数。 |
ST_IsRing | 以Line作为输入参数,判断是否是环(如Line是闭合的)。 |
ST_StartPoint | 用于返回Line的第一个点。 |
ST_EndPoint | 用于返回Line的最后一个点。 |
ST_X | 返回Point的X坐标。 |
ST_Y | 返回Point的Y坐标。 |
ST_Boundary | 输入一个几何对象,然后以几何对象形式返回其组合边界。 |
ST_Envelope | 以多边形的形式返回几何对象的最小边界框。 |
ST_Difference | 输入两个几何对象,然后返回表示两个源对象之差的几何对象。 |
ST_Distance | 用于返回两个几何对象之间的距离。这一距离是两个几何对象的最近折点之间的距离。 |
ST_ExteriorRing | 以Line形式返回面的外部环。 |
ST_Intersection | 以两个几何对象作为输入参数,然后以二维几何对象的形式返回交集。 |
ST_SymDifference | 返回表示两个几何对象间的点集对称差异的几何值对象。 |
ST_Contains | 输入两个几何对象,判断第一个对象是否完全包含第二个对象。 |
ST_Crosses | 以两个几何对象作为输入,如果这两个对象的交集生成的几何对象的维度小于两个源对象中的最大维度,则返回 1。交集对象所包含的点必须在两个源几何的内部,并且不等于其中任何一个源对象。否则,返回 0。 |
ST_Disjoint | 输入两个几何对象,判断两个几何对象的交集是否为空集。 |
ST_Equals | 判断两个几何对象是否完全相同。 |
ST_Intersects | 判断两个几何对象的交集是否不生成空集。 |
ST_Overlaps | 判断两个几何对象的交集生成的几何对象是否维度相同但不等于任一源对象。 |
ST_Relate | 比较两个几何对象,判断是否满足“DE-9IM”模式(https://en.wikipedia.org/wiki/DE-9IM)矩阵字符串指定的条件。 |
ST_Touches | 判断两个几何对象的公共点是否都不与两个几何对象的内部相交。 |
ST_Within | 判断第一个几何对象是否完全位于第二个几何对象的范围内。 |
ST_asBinary | 输入一个几何对象,然后返回其可识别的二进制WKB数据。 |
ST_GeometryFromWKBHexString | 输入WKB的HEX字符串数据,返回对应的几何对象。 |
ST_pointFromWKBHexString | 输入Point的WKB的HEX字符串数据,返回对应的Point几何对象。 |
ST_lineFromWKBHexString | 输入Line的WKB的HEX字符串数据,返回对应的Line几何对象。 |
ST_polyFromWKBHexString | 输入Polygon的WKB的HEX字符串数据,返回对应的Polygon几何对象。 |
ST_MPointFromWKBHexString | 输入MultiPoint的WKB的HEX字符串数据,返回对应的MultiPoint几何对象。 |
ST_MLineFromWKBHexString | 输入MultiLine的WKB的HEX字符串数据,返回对应的MultiLine几何对象。 |
ST_MPolyFromWKBHexString | 输入MultiPolygon的WKB的HEX字符串数据,返回对应的MultiPolygon几何对象。 |
ST_GeometryFromWKB | 输入WKB数据,返回对应的几何对象。 |
ST_pointFromWKB | 输入Point的WKB数据,返回对应的Point几何对象。 |
ST_lineFromWKB | 输入Line的WKB数据,返回对应的Line几何对象。 |
ST_polyFromWKB | 输入Polygon的WKB数据,返回对应的Polygon几何对象。 |
ST_MPointFromWKB | 输入MultiPoint的WKB数据,返回对应的MultiPoint几何对象。 |
ST_MLineFromWKB | 输入MultiLine的WKB数据,返回对应的MultiLine几何对象。 |
ST_MPolyFromWKB | 输入MultiPolygon的WKB数据,返回对应的MultiPolygon几何对象。 |
ST_GeometryFromGeoJson | 输入GeoJson的字符串数据,返回对应的几何对象。 |
ST_GeometryFromJson | 输入ESRI Geometry Object Json的字符串数据,返回对应的几何对象。 |
ST_asGeoJson | 把几何对象转成GeoJson格式输出。 |
ST_asJson | 把几何对象转成ESRI Geometry Object Json格式输出。 |
ST_GeometryFromEsriShape | 输入ESRI Shape的二进制数据,返回对应的几何对象。 |
UDF_SYS_GEO_IN_CYCLE | 仅适用于北半球:做基于地理位置的经纬度画圈 |
UDF_SYS_GEO_IN_RECTANGLE | 仅适用于北半球:用于做基于地理位置的经纬度画矩形 |
UDF_SYS_GEO_DISTANCE | 仅适用于北半球:用作一个经纬度列和一个固定的坐标点的距离计算 |
7. 函数定义与示例
- ST_asText
ST_asText(GEOMETRY) -> VARCHAR
将Geometry数据转成WKT格式的字符串数据。
示例:
select ST_asText(ST_LineFromText('LINESTRING (0 0, 1 1, 1 2)'));
+----------------------------+
| _col0 |
+----------------------------+
| LINESTRING (0 0, 1 1, 1 2) |
+----------------------------+
- ST_LineFromText
ST_LineFromText(VARCHAR) -> GEOMETRY
输入WKT格式的Line字符串数据,生成Line的Geometry数据。
示例:
select ST_asText(ST_LineFromText('LINESTRING (0 0, 1 1, 1 2)'));
+----------------------------+
| _col0 |
+----------------------------+
| LINESTRING (0 0, 1 1, 1 2) |
+----------------------------+
- ST_Point
ST_Point(DOUBLE, DOUBLE) -> GEOMETRY
从坐标系的坐标值(X, Y),生成对应的Point的Geometry数据。
示例:
select ST_asText(ST_Point(30.2741500000,120.1551500000));
+----------------------------+
| _col0 |
+----------------------------+
| POINT (30.27415 120.15515) |
+----------------------------+
- ST_Polygon
ST_Polygon(VARCHAR) -> GEOMETRY
输入WKT格式的Polygon字符串数据,生成Polygon的Geometry数据。
示例:
select ST_asText(ST_Polygon('POLYGON((0 0,4 0,4 4,0 4,0 0),(1 1, 2 1, 2 2, 1 2,1 1))'));
+----------------------------------------------------------------+
| _col0 |
+----------------------------------------------------------------+
| POLYGON ((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 1 2, 2 2, 2 1, 1 1)) |
+----------------------------------------------------------------+
- ST_Area
ST_Area(Geometry) -> DOUBLE
返回面或多面的面积。对于点、线,返回0.0。对于GeometryCollection,返回所有单个面积的和。
示例:
select ST_Area(ST_Polygon('POLYGON((0 0,4 0,4 4,0 4,0 0),(1 1, 2 1, 2 2, 1 2,1 1))'));
+-------+
| _col0 |
+-------+
| 15.0 |
+-------+
select ST_Area(ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'));
+-------+
| _col0 |
+-------+
| 16.0 |
+-------+
- ST_GeometryFromText
ST_GeometryFromText(VARCHAR) -> GEOMETRY
输入WKT格式的字符串数据,生成Geometry数据。
- ST_Buffer
ST_Buffer(GEOMETRY, DOUBLE) -> GEOMETRY
获取几何对象和距离,然后返回表示围绕源对象的缓冲区的几何对象。
- ST_Centroid
ST_Centroid(GEOMETRY) -> GEOMETRY
获取几何对象的中心点。
示例:
select ST_asText(ST_Centroid(ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))')));
+-----------------------+
| _col0 |
+-----------------------+
| POINT (1.8125 1.8125) |
+-----------------------+
select ST_asText(ST_Centroid(ST_GeometryFromText('LINESTRING (0 0, 1 1, 1 2)')));
+---------------+
| _col0 |
+---------------+
| POINT (0.5 1) |
+---------------+
select ST_asText(ST_Centroid(ST_GeometryFromText('POINT (0.5 1)')));
+---------------+
| _col0 |
+---------------+
| POINT (0.5 1) |
+---------------+
select ST_asText(ST_Centroid(ST_GeometryFromText('POLYGON((0 0,4 0,4 4,0 4,0 0),(1 1, 2 1, 2 2, 1 2,1 1))')));
+---------------------------------------------+
| _col0 |
+---------------------------------------------+
| POINT (2.033333333333333 2.033333333333333) |
+---------------------------------------------+
- ST_CoordDim
ST_CoordDim(GEOMETRY) -> BIGINT
返回几何对象的坐标值维度。
示例:
select ST_CoordDim(ST_GeometryFromText('POLYGON((0 0,4 0,4 4,0 4,0 0),(1 1, 2 1, 2 2, 1 2,1 1))'));
+-------+
| _col0 |
+-------+
| 2 |
+-------+
select ST_CoordDim(ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'));
+-------+
| _col0 |
+-------+
| 2 |
+-------+
select st_coorddim(st_geometryfromtext('point Z (60.567222 -140.404 5959)'));
+-------+
| _col0 |
+-------+
| 3 |
+-------+
select st_coorddim(st_geometryfromtext('point M (60.567222 -140.404 5250)'));
+-------+
| _col0 |
+-------+
| 3 |
+-------+
select st_coorddim(st_geometryfromtext('point ZM (60.567222 -140.404 5959 5250)'));
+-------+
| _col0 |
+-------+
| 4 |
+-------+
- ST_Dimension
ST_Dimension(GEOMETRY) -> BIGINT
用于返回几何对象的维度。在这种情况下,维度是指长度和宽度。例如,点既没有长度也没有宽度,所以其维度为 0;而线只有长度却没有宽度,因此其维度为 1。
示例:
select ST_Dimension(ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'));
+-------+
| _col0 |
+-------+
| 2 |
+-------+
- ST_IsClosed
ST_IsClosed(GEOMETRY) -> BOOLEAN
判断Line或者MultiLine是否闭合。
示例:
select ST_IsClosed(ST_GeometryFromText('LINESTRING (0 0, 1 1, 1 2)'));
+-------+
| _col0 |
+-------+
| 0 |
+-------+
select ST_IsClosed(ST_GeometryFromText('LINESTRING (0 0, 1 1, 1 2, 0 0)'));
+-------+
| _col0 |
+-------+
| 1 |
+-------+
select ST_IsClosed(ST_GeometryFromText('MULTILINESTRING ((0 0, 1 1, 1 2), (2 3, 3 2, 5 4))'));
+-------+
| _col0 |
+-------+
| 0 |
+-------+
- ST_IsEmpty
ST_IsEmpty(GEOMETRY) -> BOOLEAN
判断几何对象是否为空。
示例:
select ST_IsEmpty(ST_GeometryFromText('LINESTRING (0 0, 1 1, 1 2, 0 0)'));
+-------+
| _col0 |
+-------+
| 0 |
+-------+
select ST_IsEmpty(null);
+-------+
| _col0 |
+-------+
| NULL |
+-------+
SELECT ST_IsEmpty(ST_GeometryFromText('GEOMETRYCOLLECTION EMPTY'));
+-------+
| _col0 |
+-------+
| 1 |
+-------+
SELECT ST_IsEmpty(ST_GeometryFromText('POLYGON EMPTY'));
+-------+
| _col0 |
+-------+
| 1 |
+-------+
- ST_Length
ST_Length(GEOMETRY) -> DOUBLE
计算Line或者MultiLine的长度。
示例:
SELECT ST_Length(ST_GeometryFromText('LINESTRING (0 0, 1 1, 1 2, 0 0)'));
+-------------------+
| _col0 |
+-------------------+
| 4.650281539872885 |
+-------------------+
SELECT ST_Length(ST_GeometryFromText('MULTILINESTRING ((0 0, 1 1, 1 2), (2 3, 3 2, 5 4))'));
+-------------------+
| _col0 |
+-------------------+
| 6.656854249492381 |
+-------------------+
- ST_XMax
ST_XMax(GEOMETRY) -> DOUBLE
返回几何对象在坐标系中的最大X坐标值。
示例:
SELECT ST_XMax(ST_GeometryFromText('MULTILINESTRING ((0 0, 1 1, 1 2), (2 3, 3 2, 5 4))'));
+-------+
| _col0 |
+-------+
| 5.0 |
+-------+
SELECT ST_XMax(ST_GeometryFromText('POINT (0.5 1)'));
+-------+
| _col0 |
+-------+
| 0.5 |
+-------+
- ST_XMin
ST_XMin(GEOMETRY) -> DOUBLE
返回几何对象在坐标系中的最小X坐标值。
示例:
SELECT ST_XMin(ST_GeometryFromText('MULTILINESTRING ((0 0, 1 1, 1 2), (2 3, 3 2, 5 4))'));
+-------+
| _col0 |
+-------+
| 0.0 |
+-------+
SELECT ST_XMin(ST_GeometryFromText('POINT (0.5 1)'));
+-------+
| _col0 |
+-------+
| 0.5 |
+-------+
- ST_YMax
ST_YMax(GEOMETRY) -> DOUBLE
返回几何对象在坐标系中的最大Y坐标值。
示例:
SELECT ST_YMax(ST_GeometryFromText('MULTILINESTRING ((0 0, 1 1, 1 2), (2 3, 3 2, 5 4))'));
+-------+
| _col0 |
+-------+
| 4.0 |
+-------+
SELECT ST_YMax(ST_GeometryFromText('POINT (0.5 1)'));
+-------+
| _col0 |
+-------+
| 1.0 |
+-------+
- ST_YMin
ST_YMin(GEOMETRY) -> DOUBLE
返回几何对象在坐标系中的最小Y坐标值。
示例:
SELECT ST_YMin(ST_GeometryFromText('MULTILINESTRING ((0 0, 1 1, 1 2), (2 3, 3 2, 5 4))'));
+-------+
| _col0 |
+-------+
| 0.0 |
+-------+
SELECT ST_YMin(ST_GeometryFromText('POINT (0.5 1)'));
+-------+
| _col0 |
+-------+
| 1.0 |
+-------+
- ST_NumInteriorRing
ST_NumInteriorRing(GEOMETRY) -> BIGINT
以Polygon作为输入参数,并返回其内部环数。
示例:
SELECT ST_NumInteriorRing(ST_GeometryFromText('POLYGON((0 0,4 0,4 4,0 4,0 0),(1 1, 2 1, 2 2, 1 2,1 1))'));
+-------+
| _col0 |
+-------+
| 1 |
+-------+
- ST_NumPoints
ST_NumPoints(GEOMETRY) -> BIGINT
用于返回几何对象中的点(折点)数。
示例:
SELECT ST_NumPoints(ST_GeometryFromText('POLYGON((0 0,4 0,4 4,0 4,0 0),(1 1, 2 1, 2 2, 1 2,1 1))'));
+-------+
| _col0 |
+-------+
| 8 |
+-------+
SELECT ST_NumPoints(ST_GeometryFromText('POLYGON EMPTY'));
+-------+
| _col0 |
+-------+
| 0 |
+-------+
SELECT ST_NumPoints(ST_GeometryFromText('POINT (0.5 1)'));
+-------+
| _col0 |
+-------+
| 1 |
+-------+
- ST_IsRing
ST_IsRing(GEOMETRY) -> BOOLEAN
以Line作为输入参数,判断是否是环(如Line是闭合的)。
示例:
select ST_IsRing(ST_GeometryFromText('LINESTRING (0 0, 1 1, 1 2)'));
+-------+
| _col0 |
+-------+
| 0 |
+-------+
select ST_IsRing(ST_GeometryFromText('LINESTRING (0 0, 1 1, 1 2, 0 0)'));
+-------+
| _col0 |
+-------+
| 1 |
+-------+
- ST_StartPoint
ST_StartPoint(GEOMETRY) -> GEOMETRY
用于返回Line的第一个点。
示例:
select ST_asText(ST_StartPoint(ST_GeometryFromText('LINESTRING (0 0, 1 1, 1 2, 0 0)')));
+-------------+
| _col0 |
+-------------+
| POINT (0 0) |
+-------------+
- ST_EndPoint
ST_EndPoint(GEOMETRY) -> GEOMETRY
用于返回Line的最后一个点。
示例:
select ST_asText(ST_EndPoint(ST_GeometryFromText('LINESTRING (0 0, 1 1, 1 2)')));
+-------------+
| _col0 |
+-------------+
| POINT (1 2) |
+-------------+
- ST_X
ST_X(GEOMETRY) -> DOUBLE
返回Point的X坐标。
示例:
select ST_X(ST_GeometryFromText('POINT (0.5 1)'));
+-------+
| _col0 |
+-------+
| 0.5 |
+-------+
- ST_Y
ST_Y(GEOMETRY) -> DOUBLE
返回Point的Y坐标。
示例:
select ST_Y(ST_GeometryFromText('POINT (0.5 1)'));
+-------+
| _col0 |
+-------+
| 1.0 |
+-------+
- ST_Boundary
ST_Boundary(GEOMETRY) -> GEOMETRY
输入一个几何对象,然后以几何对象形式返回其组合边界。
示例:
select ST_asText(ST_Boundary(ST_GeometryFromText('POINT (0.5 1)')));
+-------------+
| _col0 |
+-------------+
| POINT EMPTY |
+-------------+
select ST_asText(ST_Boundary(ST_GeometryFromText('LINESTRING (0 0, 1 1, 1 2)')));
+---------------------------+
| _col0 |
+---------------------------+
| MULTIPOINT ((0 0), (1 2)) |
+---------------------------+
select ST_asText(ST_Boundary(ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))')));
+-------------------------------------------------------------------------------------------------------------+
| _col0 |
+-------------------------------------------------------------------------------------------------------------+
| MULTILINESTRING ((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 1 2, 2 2, 2 1, 1 1), (-1 -1, -2 -1, -2 -2, -1 -2, -1 -1)) |
+-------------------------------------------------------------------------------------------------------------+
- ST_Envelope
ST_Envelope(GEOMETRY) -> GEOMETRY
以多边形的形式返回几何对象的最小边界框。
示例:
select ST_asText(ST_Envelope(ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))')));
+-------------------------------------------+
| _col0 |
+-------------------------------------------+
| POLYGON ((-2 -2, 4 -2, 4 4, -2 4, -2 -2)) |
+-------------------------------------------+
- ST_Difference
ST_Difference(GEOMETRY, GEOMETRY) -> GEOMETRY
输入两个几何对象,然后返回表示两个源对象之差的几何对象。
示例:
select ST_asText(ST_Difference(
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'),
ST_GeometryFromText('MULTILINESTRING ((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 1 2, 2 2, 2 1, 1 1), (-1 -1, -2 -1, -2 -2, -1 -2, -1 -1))')));
+--------------------------------------------------------------------------------------------------------------+
| _col0 |
+--------------------------------------------------------------------------------------------------------------+
| MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 1 2, 2 2, 2 1, 1 1)), ((-1 -1, -2 -1, -2 -2, -1 -2, -1 -1))) |
+--------------------------------------------------------------------------------------------------------------+
select ST_asText(ST_Difference(
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'),
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))')));
+--------------------+
| _col0 |
+--------------------+
| MULTIPOLYGON EMPTY |
+--------------------+
- ST_Distance
ST_Distance(GEOMETRY, GEOMETRY) -> DOUBLE
用于返回两个几何对象之间的距离。这一距离是两个几何对象的最近折点之间的距离。
示例:
select ST_Distance(
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'),
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'));
+-------+
| _col0 |
+-------+
| 0.0 |
+-------+
select ST_Distance(
ST_GeometryFromText('POINT(0 0)'),
ST_GeometryFromText('POINT(1 1)'));
+--------------------+
| _col0 |
+--------------------+
| 1.4142135623730951 |
+--------------------+
- ST_ExteriorRing
ST_ExteriorRing(GEOMETRY) -> GEOMETRY
以Line形式返回面的外部环。
示例:
select ST_asText(ST_ExteriorRing(ST_GeometryFromText('POLYGON((0 0,4 0,4 4,0 4,0 0),(1 1, 2 1, 2 2, 1 2,1 1))')));
+--------------------------------------+
| _col0 |
+--------------------------------------+
| LINESTRING (0 0, 4 0, 4 4, 0 4, 0 0) |
+--------------------------------------+
- ST_Intersection
ST_Intersection(GEOMETRY, GEOMETRY) -> GEOMETRY
以两个几何对象作为输入参数,然后以二维几何对象的形式返回交集。
示例:
select ST_asText(ST_Intersection(
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'),
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))')));
+--------------------------------------------------------------------------------------------------------------+
| _col0 |
+--------------------------------------------------------------------------------------------------------------+
| MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 1 2, 2 2, 2 1, 1 1)), ((-1 -1, -2 -1, -2 -2, -1 -2, -1 -1))) |
+--------------------------------------------------------------------------------------------------------------+
select ST_asText(ST_Intersection(
ST_GeometryFromText('POINT(0 0)'),
ST_GeometryFromText('POINT(1 1)')));
+--------------------+
| _col0 |
+--------------------+
| MULTIPOLYGON EMPTY |
+--------------------+
- ST_SymDifference
ST_SymDifference(GEOMETRY, GEOMETRY) -> GEOMETRY
返回表示两个几何对象间的点集对称差异的几何值对象。
示例:
select ST_asText(ST_SymDifference(
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'),
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))')));
+--------------------+
| _col0 |
+--------------------+
| MULTIPOLYGON EMPTY |
+--------------------+
select ST_asText(ST_SymDifference(
ST_GeometryFromText('POINT(0 0)'),
ST_GeometryFromText('POINT(1 1)')));
+---------------------------+
| _col0 |
+---------------------------+
| MULTIPOINT ((0 0), (1 1)) |
+---------------------------+
下图的阴影部分显示了对称差异的结果。对称差异为包括两个表面的多表面图形:其中一个表面包含位于正方形之内、圆形之外的所有点,另外一个表面包含位于圆形之内、正方形之外的所有点。
- ST_Contains
ST_Contains(GEOMETRY, GEOMETRY) -> BOOLEAN
输入两个几何对象,判断第一个对象是否完全包含第二个对象。
示例:
select ST_Contains(
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'),
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'));
+-------+
| _col0 |
+-------+
| 1 |
+-------+
select ST_Contains(
ST_GeometryFromText('POINT(0 0)'),
ST_GeometryFromText('POINT(1 1)'));
+-------+
| _col0 |
+-------+
| 0 |
+-------+
- ST_Crosses
ST_Crosses(GEOMETRY, GEOMETRY) -> BOOLEAN
以两个几何对象作为输入,如果这两个对象的交集生成的几何对象的维度小于两个源对象中的最大维度,则返回 1。交集对象所包含的点必须在两个源几何的内部,并且不等于其中任何一个源对象。否则,返回 0。
示例:
select ST_Crosses(
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'),
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'));
+-------+
| _col0 |
+-------+
| 0 |
+-------+
select ST_Crosses(
ST_GeometryFromText('LINESTRING(0 0, 2 2)'),
ST_GeometryFromText('LINESTRING(0 2, 2 0)'));
+-------+
| _col0 |
+-------+
| 1 |
+-------+
- ST_Disjoint
ST_Disjoint(GEOMETRY, GEOMETRY) -> BOOLEAN
输入两个几何对象,判断两个几何对象的交集是否为空集。
示例:
select ST_Disjoint(
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'),
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'));
+-------+
| _col0 |
+-------+
| 0 |
+-------+
select ST_Disjoint(
ST_GeometryFromText('LINESTRING(0 0, 2 2)'),
ST_GeometryFromText('LINESTRING(0 2, 2 4)'));
+-------+
| _col0 |
+-------+
| 1 |
+-------+
- ST_Equals
ST_Equals(GEOMETRY, GEOMETRY) -> BOOLEAN
判断两个几何对象是否完全相同。
示例:
select ST_Equals(
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'),
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'));
+-------+
| _col0 |
+-------+
| 1 |
+-------+
select ST_Equals(
ST_GeometryFromText('LINESTRING(0 0, 2 2)'),
ST_GeometryFromText('LINESTRING(0 2, 2 4)'));
+-------+
| _col0 |
+-------+
| 0 |
+-------+
- ST_Intersects
ST_Intersects(GEOMETRY, GEOMETRY) -> BOOLEAN
判断两个几何对象的交集是否不生成空集。
示例:
select ST_Intersects(
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'),
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'));
+-------+
| _col0 |
+-------+
| 1 |
+-------+
select ST_Intersects(
ST_GeometryFromText('LINESTRING(0 0, 2 2)'),
ST_GeometryFromText('LINESTRING(0 2, 2 4)'));
+-------+
| _col0 |
+-------+
| 0 |
+-------+
- ST_Overlaps
ST_Overlaps(GEOMETRY, GEOMETRY) -> BOOLEAN
判断两个几何对象的交集生成的几何对象是否维度相同但不等于任一源对象。
示例:
select ST_Overlaps(
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'),
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'));
+-------+
| _col0 |
+-------+
| 0 |
+-------+
select ST_Overlaps(
ST_GeometryFromText('LINESTRING(1 1, 2 2)'),
ST_GeometryFromText('LINESTRING(0 0, 1.5 1.5)'));
+-------+
| _col0 |
+-------+
| 1 |
+-------+
- ST_Relate
ST_Relate(GEOMETRY, GEOMETRY, VARCHAR) -> BOOLEAN
比较两个几何对象,判断是否满足“DE-9IM”模式(https://en.wikipedia.org/wiki/DE-9IM)矩阵字符串指定的条件。
示例:
select ST_Relate(
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'),
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'),
'102101FF2');
+-------+
| _col0 |
+-------+
| 0 |
+-------+
select ST_Relate(
ST_GeometryFromText('LINESTRING(1 1, 2 2)'),
ST_GeometryFromText('LINESTRING(0 0, 1.5 1.5)'),
'1*1***1**');
+-------+
| _col0 |
+-------+
| 1 |
+-------+
- ST_Touches
ST_Touches(GEOMETRY, GEOMETRY) -> BOOLEAN
判断两个几何对象的公共点是否都不与两个几何对象的内部相交。
示例:
select ST_Touches(
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'),
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'));
+-------+
| _col0 |
+-------+
| 0 |
+-------+
select ST_Touches(
ST_GeometryFromText('LINESTRING(1 1, 2 2)'),
ST_GeometryFromText('LINESTRING(0 0, 1 1)'));
+-------+
| _col0 |
+-------+
| 1 |
+-------+
- ST_Within
ST_Within(GEOMETRY, GEOMETRY) -> BOOLEAN
判断第一个几何对象是否完全位于第二个几何对象的范围内。
示例:
select ST_Within(
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'),
ST_GeometryFromText('MULTIPOLYGON (((0 0, 4 0, 4 4, 0 4, 0 0), (1 1, 2 1, 2 2, 1 2, 1 1)), ((-1 -1, -1 -2, -2 -2, -2 -1, -1 -1)))'));
+-------+
| _col0 |
+-------+
| 1 |
+-------+
select ST_Within(
ST_GeometryFromText('LINESTRING(1 1, 2 2)'),
ST_GeometryFromText('LINESTRING(0 0, 1 1)'));
+-------+
| _col0 |
+-------+
| 0 |
+-------+
- ST_asBinary
ST_asBinary(GEOMETRY) -> VARBINARY
输入一个几何对象,然后返回其可识别的二进制WKB数据。
- ST_GeometryFromWKBHexString
ST_GeometryFromWKBHexString(VARCHAR) -> GEOMETRY
输入WKB的HEX字符串数据,返回对应的几何对象。
示例:
select ST_ASTEXT(ST_GeometryFromWKBHexString('000000000140000000000000004010000000000000'));
+-------------+
| _col0 |
+-------------+
| POINT (2 4) |
+-------------+
- ST_pointFromWKBHexString
ST_pointFromWKBHexString(VARCHAR) -> GEOMETRY
输入Point的WKB的HEX字符串数据,返回对应的Point几何对象。
示例:
select ST_ASTEXT(ST_pointFromWKBHexString('000000000140000000000000004010000000000000'));
+-------------+
| _col0 |
+-------------+
| POINT (2 4) |
+-------------+
- ST_lineFromWKBHexString
ST_lineFromWKBHexString(VARCHAR) -> GEOMETRY
输入Line的WKB的HEX字符串数据,返回对应的Line几何对象。
- ST_polyFromWKBHexString
ST_polyFromWKBHexString(VARCHAR) -> GEOMETRY
输入Polygon的WKB的HEX字符串数据,返回对应的Polygon几何对象。
- ST_MPointFromWKBHexString
ST_MPointFromWKBHexString(VARCHAR) -> GEOMETRY
输入MultiPoint的WKB的HEX字符串数据,返回对应的MultiPoint几何对象。
示例:
SELECT ST_asText(ST_MPointFromWKBHexString('0104000000020000000101000000000000000000000000000000000000000101000000000000000000F03F0000000000000040'));
+---------------------------+
| _col0 |
+---------------------------+
| MULTIPOINT ((0 0), (1 2)) |
+---------------------------+
- ST_MLineFromWKBHexString
ST_MLineFromWKBHexString(VARCHAR) -> GEOMETRY
输入MultiLine的WKB的HEX字符串数据,返回对应的MultiLine几何对象。
- ST_MPolyFromWKBHexString
ST_MPolyFromWKBHexString(VARCHAR) -> GEOMETRY
输入MultiPolygon的WKB的HEX字符串数据,返回对应的MultiPolygon几何对象。
- ST_GeometryFromWKB
ST_GeometryFromWKB(VARBINARY) -> GEOMETRY
输入WKB数据,返回对应的几何对象。
示例:
select ST_ASTEXT(ST_GeometryFromWKB(from_hex('000000000140000000000000004010000000000000')));
+-------------+
| _col0 |
+-------------+
| POINT (2 4) |
+-------------+
- ST_pointFromWKB
ST_pointFromWKB(VARBINARY) -> GEOMETRY
输入Point的WKB数据,返回对应的Point几何对象。
示例:
select ST_ASTEXT(ST_pointFromWKB(from_hex('000000000140000000000000004010000000000000')));
+-------------+
| _col0 |
+-------------+
| POINT (2 4) |
+-------------+
- ST_lineFromWKB
ST_lineFromWKB(VARBINARY) -> GEOMETRY
输入Line的WKB数据,返回对应的Line几何对象。
- ST_polyFromWKB
ST_polyFromWKB(VARBINARY) -> GEOMETRY
输入Polygon的WKB数据,返回对应的Polygon几何对象。
- ST_MPointFromWKB
ST_MPointFromWKB(VARBINARY) -> GEOMETRY
输入MultiPoint的WKB数据,返回对应的MultiPoint几何对象。
示例:
SELECT ST_asText(ST_MPointFromWKB(from_hex('0104000000020000000101000000000000000000000000000000000000000101000000000000000000F03F0000000000000040')));
+---------------------------+
| _col0 |
+---------------------------+
| MULTIPOINT ((0 0), (1 2)) |
+---------------------------+
- ST_MLineFromWKB
ST_MLineFromWKB(VARBINARY) -> GEOMETRY
输入MultiLine的WKB数据,返回对应的MultiLine几何对象。
- ST_MPolyFromWKB
ST_MPolyFromWKB(VARBINARY) -> GEOMETRY
输入MultiPolygon的WKB数据,返回对应的MultiPolygon几何对象。
- ST_GeometryFromGeoJson
ST_GeometryFromGeoJson(VARCHAR) -> GEOMETRY
输入GeoJson的字符串数据,返回对应的几何对象。
- ST_GeometryFromJson
ST_GeometryFromJson(VARCHAR) -> GEOMETRY
输入ESRI Geometry Object Json的字符串数据,返回对应的几何对象。
- ST_asGeoJson
ST_asGeoJson(GEOMETRY) -> VARCHAR
把几何对象转成GeoJson格式输出。
示例:
SELECT ST_asGeoJson(ST_GeometryFromText('MULTILINESTRING ((0 0, 1 1, 1 2), (2 3, 3 2, 5 4))'));
+-----------------------------------------------------------------------------------------------+
| _col0 |
+-----------------------------------------------------------------------------------------------+
| {"type":"MultiLineString","coordinates":[[[0,0],[1,1],[1,2]],[[2,3],[3,2],[5,4]]],"crs":null} |
+-----------------------------------------------------------------------------------------------+
- ST_asJson
ST_asJson(GEOMETRY) -> VARCHAR
把几何对象转成ESRI Geometry Object Json格式输出。
示例:
SELECT ST_asJson(ST_GeometryFromText('MULTILINESTRING ((0 0, 1 1, 1 2), (2 3, 3 2, 5 4))'));
+-----------------------------------------------------+
| _col0 |
+-----------------------------------------------------+
| {"paths":[[[0,0],[1,1],[1,2]],[[2,3],[3,2],[5,4]]]} |
+-----------------------------------------------------+
- ST_GeometryFromEsriShape
ST_GeometryFromEsriShape(VARBINARY) -> GEOMETRY
输入ESRI Shape的二进制数据,返回对应的几何对象。
示例:
SELECT california_counties.name,
COUNT(*) cnt
FROM california_counties
CROSS JOIN earthquakes
WHERE ST_CONTAINS (ST_GeometryFromesrishape(california_counties.boundaryshape), ST_POINT(earthquakes.longitude, earthquakes.latitude))
GROUP BY california_counties.name
ORDER BY cnt DESC, california_counties.name;
+-----------------+------+
| name | cnt |
+-----------------+------+
| San Benito | 8 |
| San Bernardino | 7 |
| Riverside | 6 |
| Inyo | 5 |
| Imperial | 3 |
| San Diego | 2 |
| Kern | 1 |
| Kings | 1 |
| Monterey | 1 |
| San Luis Obispo | 1 |
| Santa Clara | 1 |
| Ventura | 1 |
+-----------------+------+
- UDF_SYS_GEO_IN_CYCLE
UDF_SYS_GEO_IN_CYCLE(longitude, latitude, point, radius) -> BOOLEAN
第一个参数为经度列名称, 类型FLOAT/DOUBLE
第二个参数为纬度列名称, 类型FLOAT/DOUBLE
第三个参数为圆圈中心点的位置,格式=>'经度,维度', =>'120.85979,30.011984'
第四个参数为圆圈的半径,单位米
判断longitude、latitude的点是否在以中心点point为圆心,半径为radius的圆内。
示例:
SELECT count(*) as cnt FROM earthquakes
WHERE UDF_SYS_GEO_IN_CYCLE(longitude,latitude, '120.85979,30.011984', 5000000000000) = true;
+------+
| cnt |
+------+
| 2858 |
+------+
- UDF_SYS_GEO_IN_RECTANGLE
UDF_SYS_GEO_IN_RECTANGLE(longitude, latitude, pointA, pointB) -> BOOLEAN
第一个参数为经度列名称, 类型FLOAT/DOUBLE
第二个参数为纬度列名称, 类型FLOAT/DOUBLE
第三个参数为矩形的左下角坐标,格式=>'经度,维度', =>'120.85979,30.011984'
第四个参数为矩形的右上角坐标,格式=>'经度,维度', =>'120.88450,31.21011'
判断longitude、latitude的点是否在以2个斜角点构成的矩形内。
示例:
SELECT count(*) as cnt FROM earthquakes
WHERE UDF_SYS_GEO_IN_RECTANGLE(longitude, latitude, '69.037,36.5759', '142.018,67.8713')=true;
+------+
| cnt |
+------+
| 55 |
+------+
- UDF_SYS_GEO_DISTANCE
UDF_SYS_GEO_DISTANCE(longitude, latitude, pointA) -> INTEGER
第一个参数为经度列名称, 类型FLOAT/DOUBLE
第二个参数为纬度列名称, 类型FLOAT/DOUBLE
第三个参数为固定坐标点的经纬度,格式=>'经度,维度', =>'120.85979,30.011984'
求longitude、latitude的点和pointA点的距离,单位:米。
示例:
SELECT count(*) as cnt FROM earthquakes
WHERE UDF_SYS_GEO_DISTANCE(longitude, latitude, '69.037,36.5759') > 10000;
+------+
| cnt |
+------+
| 2857 |
+------+
8. 更多参考
- 教程:Data Lake Analytics + OSS数据文件格式处理大全: https://yq.aliyun.com/articles/623246
- 使用Data Lake Analytics从OSS清洗数据到AnalyticDB:https://yq.aliyun.com/articles/623401
- Data Lake Analytics使用场景:https://help.aliyun.com/document_detail/70380.html
- OLAP on TableStore——基于Data Lake Analytics的Serverless SQL大数据分析https://yq.aliyun.com/articles/618501
- 使用Data Lake Analytics 分析OSS数据:https://help.aliyun.com/document_detail/70387.html
- Data Lake Analytics数据库的连接方式:https://help.aliyun.com/document_detail/71074.htm
- Data Lake Analytics分析RDS数据:https://yq.aliyun.com/articles/629046
- 下一代企业级云上数据分析服务:Data Lake Analytics:https://yq.aliyun.com/articles/635516
- DLA相关技术文档:https://yq.aliyun.com/search?q=DLA&type=ARTICLE
原文链接
更多技术干货 请关注阿里云云栖社区微信号 :yunqiinsight