ensp学习-2 ensp设置接口ip

1、设备型号

2、右键CLI进入命令行

The device is running!

<Huawei>The device has not been started!
The device has not been started!
################################################################################
##

3、直接输portswitch报错

<Huawei>undo portswitch
             ^
Error: Unrecognized command found at '^' position.
<Huawei>ls
        ^
Error: Unrecognized command found at '^' position.
<Huawei>dev
        ^
Error: Unrecognized command found at '^' position.
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]undo portswitch
             ^
Error: Unrecognized command found at '^' position.
[Huawei]undo portswitch
             ^
Error: Unrecognized command found at '^' position.
[Huawei]interface thernet 0/0/0
                  ^
Error: Wrong parameter found at '^' position.

4、需要先执行如下指令

[Huawei]interface ethernet 0/0/0

5、设置接口IP

[Huawei-Ethernet0/0/0]undo portswitch
[Huawei-Ethernet0/0/0]ip address 192.168.10.2 24

6、查看接口

[Huawei-Ethernet0/0/0]display interface brief
PHY: Physical
*down: administratively down
(l): loopback
(s): spoofing
(b): BFD down
^down: standby
(e): ETHOAM down
(d): Dampening Suppressed
InUti/OutUti: input utility/output utility
Interface                   PHY   Protocol InUti OutUti   inErrors  outErrors
Ethernet0/0/0               down  down        0%     0%          0          0
Ethernet0/0/1               down  down        0%     0%          0          0
Ethernet0/0/2               down  down        0%     0%          0          0
Ethernet0/0/3               down  down        0%     0%          0          0
Ethernet0/0/4               down  down        0%     0%          0          0
Ethernet0/0/5               down  down        0%     0%          0          0
Ethernet0/0/6               down  down        0%     0%          0          0
Ethernet0/0/7               down  down        0%     0%          0          0
Ethernet0/0/8               down  down        0%     0%          0          0
NULL0                       up    up(s)       0%     0%          0          0

7、查看接口IP

[Huawei-Ethernet0/0/0]display ip int brief
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 1
The number of interface that is DOWN in Physical is 2
The number of interface that is UP in Protocol is 1
The number of interface that is DOWN in Protocol is 2

Interface                         IP Address/Mask      Physical   Protocol  
Ethernet0/0/0                     192.168.10.2/24      down       down      
Ethernet0/0/8                     unassigned           down       down      
NULL0                             unassigned           up         up(s)     
[Huawei-Ethernet0/0/0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

可以看到已经设置成功