k8s版本升级1.19.8升级为1.20.2

文档:v1-18.docs.kubernetes.io/zh/docs/tas…

一、升级master节点

1、查看版本列表

yum list --showduplicates kubeadm --disableexcludes=kubernetes

2、下载新版本的kubeadm

#下载新版本的kubeadm
[root@master ~]# yum install -y kubeadm-1.20.2 --disableexcludes=kubernetes

#验证kubeadm版本
[root@master ~]# kubeadm version
kubeadm version: &version.Info{Major:"1", Minor:"20", GitVersion:"v1.20.2", GitCommit:"faecb196815e248d3ecfb03c680a4507229c2a56", GitTreeState:"clean", BuildDate:"2021-01-13T13:25:59Z", GoVersion:"go1.15.5", Compiler:"gc", Platform:"linux/amd64"}

3、腾空升级服务器的节点

[root@master ~]# kubectl drain master --ignore-daemonsets
node/master cordoned
WARNING: ignoring DaemonSet-managed Pods: kube-system/calico-node-rdqxb, kube-system/kube-proxy-78lws

4、验证升级计划

[root@master ~]# kubeadm upgrade plan
[upgrade/config] Making sure the configuration is correct:
[upgrade/config] Reading configuration from the cluster...
[upgrade/config] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
[preflight] Running pre-flight checks.
[upgrade] Running cluster health checks
[upgrade] Fetching available versions to upgrade to
[upgrade/versions] Cluster version: v1.19.8
[upgrade/versions] kubeadm version: v1.20.2
[upgrade/versions] Latest stable version: v1.20.4
[upgrade/versions] Latest stable version: v1.20.4
[upgrade/versions] Latest version in the v1.19 series: v1.19.8
[upgrade/versions] Latest version in the v1.19 series: v1.19.8

Components that must be upgraded manually after you have upgraded the control plane with 'kubeadm upgrade apply':
COMPONENT   CURRENT       AVAILABLE
kubelet     2 x v1.19.8   v1.20.4

Upgrade to the latest stable version:

COMPONENT                 CURRENT    AVAILABLE
kube-apiserver            v1.19.8    v1.20.4
kube-controller-manager   v1.19.8    v1.20.4
kube-scheduler            v1.19.8    v1.20.4
kube-proxy                v1.19.8    v1.20.4
CoreDNS                   1.7.0      1.7.0
etcd                      3.4.13-0   3.4.13-0

You can now apply the upgrade by executing the following command:

	kubeadm upgrade apply v1.20.4

Note: Before you can perform this upgrade, you have to update kubeadm to v1.20.4.

_____________________________________________________________________


The table below shows the current state of component configs as understood by this version of kubeadm.
Configs that have a "yes" mark in the "MANUAL UPGRADE REQUIRED" column require manual config upgrade or
resetting to kubeadm defaults before a successful upgrade can be performed. The version to manually
upgrade to is denoted in the "PREFERRED VERSION" column.

API GROUP                 CURRENT VERSION   PREFERRED VERSION   MANUAL UPGRADE REQUIRED
kubeproxy.config.k8s.io   v1alpha1          v1alpha1            no
kubelet.config.k8s.io     v1beta1           v1beta1             no
_____________________________________________________________________

  

5、选择要升级到的目标版本

如果不是第一个升级的master的话执行:kubeadm upgrade node

只有第一个升级的master执行:kubeadm upgrade apply操作

[root@master ~]# kubeadm upgrade apply v1.20.2
[upgrade/config] Making sure the configuration is correct:
[upgrade/config] Reading configuration from the cluster...
[upgrade/config] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
[preflight] Running pre-flight checks.
[upgrade] Running cluster health checks
[upgrade/version] You have chosen to change the cluster version to "v1.20.2"
[upgrade/versions] Cluster version: v1.19.8
[upgrade/versions] kubeadm version: v1.20.2
[upgrade/confirm] Are you sure you want to proceed with the upgrade? [y/N]: y
[upgrade/prepull] Pulling images required for setting up a Kubernetes cluster
[upgrade/prepull] This might take a minute or two, depending on the speed of your internet connection
[upgrade/prepull] You can also perform this action in beforehand using 'kubeadm config images pull'
[upgrade/apply] Upgrading your Static Pod-hosted control plane to version "v1.20.2"...
Static pod: kube-apiserver-master hash: 719a832e897de592e91b599477986810
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
[upgrade/etcd] Upgrading to TLS for etcd
Static pod: etcd-master hash: ae851f5ba1b074f38b4de05cb1aadcd4
[upgrade/staticpods] Preparing for "etcd" upgrade
[upgrade/staticpods] Renewing etcd-server certificate
[upgrade/staticpods] Renewing etcd-peer certificate
[upgrade/staticpods] Renewing etcd-healthcheck-client certificate
[upgrade/staticpods] Moved new manifest to "/etc/kubernetes/manifests/etcd.yaml" and backed up old manifest to "/etc/kubernetes/tmp/kubeadm-backup-manifests-2021-02-27-16-28-09/etcd.yaml"
[upgrade/staticpods] Waiting for the kubelet to restart the component
[upgrade/staticpods] This might take a minute or longer depending on the component/version gap (timeout 5m0s)
Static pod: etcd-master hash: ae851f5ba1b074f38b4de05cb1aadcd4
Static pod: etcd-master hash: ae851f5ba1b074f38b4de05cb1aadcd4
Static pod: etcd-master hash: 3c6eed0df938b588a1cbefd450e3bcbd
[apiclient] Found 1 Pods for label selector component=etcd
[upgrade/staticpods] Component "etcd" upgraded successfully!
[upgrade/etcd] Waiting for etcd to become available
[upgrade/staticpods] Writing new Static Pod manifests to "/etc/kubernetes/tmp/kubeadm-upgraded-manifests520412682"
[upgrade/staticpods] Preparing for "kube-apiserver" upgrade
[upgrade/staticpods] Renewing apiserver certificate
[upgrade/staticpods] Renewing apiserver-kubelet-client certificate
[upgrade/staticpods] Renewing front-proxy-client certificate
[upgrade/staticpods] Renewing apiserver-etcd-client certificate
[upgrade/staticpods] Moved new manifest to "/etc/kubernetes/manifests/kube-apiserver.yaml" and backed up old manifest to "/etc/kubernetes/tmp/kubeadm-backup-manifests-2021-02-27-16-28-09/kube-apiserver.yaml"
[upgrade/staticpods] Waiting for the kubelet to restart the component
[upgrade/staticpods] This might take a minute or longer depending on the component/version gap (timeout 5m0s)
Static pod: kube-apiserver-master hash: 719a832e897de592e91b599477986810
Static pod: kube-apiserver-master hash: 719a832e897de592e91b599477986810
Static pod: kube-apiserver-master hash: d07bc053b450ce24a8c1085f6d68d40d
[apiclient] Found 1 Pods for label selector component=kube-apiserver
[upgrade/staticpods] Component "kube-apiserver" upgraded successfully!
[upgrade/staticpods] Preparing for "kube-controller-manager" upgrade
[upgrade/staticpods] Renewing controller-manager.conf certificate
[upgrade/staticpods] Moved new manifest to "/etc/kubernetes/manifests/kube-controller-manager.yaml" and backed up old manifest to "/etc/kubernetes/tmp/kubeadm-backup-manifests-2021-02-27-16-28-09/kube-controller-manager.yaml"
[upgrade/staticpods] Waiting for the kubelet to restart the component
[upgrade/staticpods] This might take a minute or longer depending on the component/version gap (timeout 5m0s)
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 4331a0b9c79c549b926db152caaa327d
Static pod: kube-controller-manager-master hash: 0c91bb51488c4e7f19222042dd8bb76d
[apiclient] Found 1 Pods for label selector component=kube-controller-manager
[upgrade/staticpods] Component "kube-controller-manager" upgraded successfully!
[upgrade/staticpods] Preparing for "kube-scheduler" upgrade
[upgrade/staticpods] Renewing scheduler.conf certificate
[upgrade/staticpods] Moved new manifest to "/etc/kubernetes/manifests/kube-scheduler.yaml" and backed up old manifest to "/etc/kubernetes/tmp/kubeadm-backup-manifests-2021-02-27-16-28-09/kube-scheduler.yaml"
[upgrade/staticpods] Waiting for the kubelet to restart the component
[upgrade/staticpods] This might take a minute or longer depending on the component/version gap (timeout 5m0s)
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: 6dbdba13d86ee08fe701bc482cc2c039
Static pod: kube-scheduler-master hash: bd4765a68b7a13f0c7d6b33332e0b273
[apiclient] Found 1 Pods for label selector component=kube-scheduler
[upgrade/staticpods] Component "kube-scheduler" upgraded successfully!
[upgrade/postupgrade] Applying label node-role.kubernetes.io/control-plane='' to Nodes with label node-role.kubernetes.io/master='' (deprecated)
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.20" in namespace kube-system with the configuration for the kubelets in the cluster
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy

[upgrade/successful] SUCCESS! Your cluster was upgraded to "v1.20.2". Enjoy!

[upgrade/kubelet] Now that your control plane is upgraded, please proceed with upgrading your kubelets if you haven't already done so.

  

6、取消对控制面节点的保护

[root@master ~]# kubectl uncordon master 

  

7、升级 kubelet 和 kubectl

[root@master ~]# yum install -y kubelet-1.20.2 kubectl-1.20.2 --disableexcludes=kubernetes

#重启 kubelet
[root@master ~]# systemctl daemon-reload
[root@master ~]# systemctl restart kubelet

  

二、升级工作节点(node节点)

1、升级 kubeadm

[root@node1 ~]# yum install -y kubeadm-1.20.2 --disableexcludes=kubernetes

  

2、保护节点

[root@master ~]# kubectl drain node1  --ignore-daemonsets

  

3、升级 kubelet 配置

[root@node1 ~]# kubeadm upgrade node

  

4、升级 kubelet 与 kubectl

[root@node1 ~]# yum install -y kubelet-1.20.2 kubectl-1.20.2 --disableexcludes=kubernetes

#重启 kubelet
[root@node1 ~]# systemctl daemon-reload
[root@node1 ~]# systemctl restart kubelet

###5、取消对节点的保护

[root@master ~]# kubectl uncordon node1

  

三、验证集群

[root@master ~]# kubectl get nodes
NAME     STATUS   ROLES                  AGE   VERSION
master   Ready    control-plane,master   68m   v1.20.2
node1    Ready    none                 67m   v1.20.2

posted @ 2021-03-29 16:59  巽逸  阅读(0)  评论(0编辑  收藏  举报  来源