Android源代码编译系统是一件很痛苦的事，主要是在修改了一些很小的东西，但要重新编译，要等很久才能编译完，如使用了mmm编译完，只是要打包一下system.img就行了，没必要去做那么多检查编译工作，所以这里跟一下系统合成原来，再精简一下，做一个快速合成系统的工具:a51m(shell 脚本)。
/****************************************************************************
* I.MX6 Android 5.1 快速合成系统
* 说明：
* Android源代码编译系统是一件很痛苦的事，主要是在修改了一些很小的东西，但
* 要重新编译，要等很久才能编译完，如使用了mmm编译完，只是要打包一下system.img
* 就行了，没必要去做那么多检查编译工作，所以这里跟一下系统合成原来，再精简
* 一下，做一个快速合成系统的工具:a51m(shell 脚本)。
*
* 2016-11-10 深圳 南山平山村 曾剑锋
***************************************************************************/
\\\\\\\\\\\\\\\\\-*-目录-*-//////////////////
| 一、Android 5.1 生成U-Boot信息解析
| 二、Android 5.1 完整生成img镜像信息
| 三、Android 5.1 生成内核信息解析
| 四、解读 Target boot image
| 五、解读 Making recovery image
| 六、解读 Target system fs image
| 七、a51m脚本
--------------------------------------------
一、Android 5.1 生成U-Boot信息解析：
1. 命令行输出信息如下：
for ubootplat in imx6q:mx6qsabresdandroid_config imx6dl:mx6dlsabresdandroid_config imx6qp:mx6qpsabresdandroid_config; do \
UBOOT_PLATFORM=`echo $ubootplat | cut -d':' -f1`; \
UBOOT_CONFIG=`echo $ubootplat | cut -d':' -f2`; \
echo ; \
echo ; \
make -C bootable/bootloader/uboot-imx/ distclean ARCH=arm CROSS_COMPILE=`pwd`/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-; \
make -C bootable/bootloader/uboot-imx/ $UBOOT_CONFIG ARCH=arm CROSS_COMPILE=`pwd`/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-; \
make -C bootable/bootloader/uboot-imx/ ARCH=arm CROSS_COMPILE=`pwd`/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-; \
install -D bootable/bootloader/uboot-imx/u-boot.imx out/target/product/sabresd_6dq/u-boot-$UBOOT_PLATFORM.imx; \
install -D bootable/bootloader/uboot-imx/u-boot.imx out/target/product/sabresd_6dq/u-boot.imx; \
done
2. 整理并解读代码如下：
for ubootplat in imx6q:mx6qsabresdandroid_config imx6dl:mx6dlsabresdandroid_config imx6qp:mx6qpsabresdandroid_config; do
# 获取平台类型
UBOOT_PLATFORM=`echo $ubootplat | cut -d':' -f1`;
# 获取配置文件名
UBOOT_CONFIG=`echo $ubootplat | cut -d':' -f2`;
echo ;
echo ;
# 清空之前的编译
make -C bootable/bootloader/uboot-imx/ distclean ARCH=arm CROSS_COMPILE=`pwd`/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-;
# 重新配置
make -C bootable/bootloader/uboot-imx/ $UBOOT_CONFIG ARCH=arm CROSS_COMPILE=`pwd`/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-;
# 编译
make -C bootable/bootloader/uboot-imx/ ARCH=arm CROSS_COMPILE=`pwd`/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-;
# 拷贝
install -D bootable/bootloader/uboot-imx/u-boot.imx out/target/product/sabresd_6dq/u-boot-$UBOOT_PLATFORM.imx;
# 拷贝
install -D bootable/bootloader/uboot-imx/u-boot.imx out/target/product/sabresd_6dq/u-boot.imx;
done
二、Android 5.1 完整生成img镜像信息：
Target ram disk: out/target/product/sabresd_6dq/ramdisk.img
Target boot image: out/target/product/sabresd_6dq/boot.img
for dtsplat in imx6q:imx6q-sabresd.dtb imx6dl:imx6dl-sabresd.dtb imx6q-ldo:imx6q-sabresd-ldo.dtb imx6qp:imx6qp-sabresd.dtb; do \
DTS_PLATFORM=`echo $dtsplat | cut -d':' -f1`; \
DTS_BOARD=`echo $dtsplat | cut -d':' -f2`; \
BOOT_IMAGE_BOARD=out/target/product/sabresd_6dq/boot-$DTS_PLATFORM.img; \
out/host/linux-x86/bin/mkbootimg --kernel out/target/product/sabresd_6dq/kernel --ramdisk out/target/product/sabresd_6dq/ramdisk.img --cmdline "console=ttymxc0,115200 init=/init video=mxcfb0:dev=ldb,bpp=32 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off vmalloc=256M androidboot.console=ttymxc0 consoleblank=0 androidboot.hardware=freescale cma=384M" --base 0x14000000 --second out/target/product/sabresd_6dq/$DTS_BOARD --output out/target/product/sabresd_6dq/boot.img; \
out/host/linux-x86/bin/boot_signer /boot out/target/product/sabresd_6dq/boot.img build/target/product/security/verity.pk8 build/target/product/security/verity.x509.pem out/target/product/sabresd_6dq/boot.img; \
size=$(for i in out/target/product/sabresd_6dq/boot.img; do stat --format "%s" "$i" | tr -d '\n'; echo +; done; echo 0); total=$(( $( echo "$size" ) )); printname=$(echo -n "out/target/product/sabresd_6dq/boot.img" | tr " " +); img_blocksize=4224; twoblocks=$((img_blocksize * 2)); onepct=$(((((17301504 / 100) - 1) / img_blocksize + 1) * img_blocksize)); reserve=$((twoblocks > onepct ? twoblocks : onepct)); maxsize=$((17301504 - reserve)); echo "$printname maxsize=$maxsize blocksize=$img_blocksize total=$total reserve=$reserve"; if [ "$total" -gt "$maxsize" ]; then echo "error: $printname too large ($total > [17301504 - $reserve])"; false; elif [ "$total" -gt $((maxsize - 32768)) ]; then echo "WARNING: $printname approaching size limit ($total now; limit $maxsize)"; fi ; \
cp -f out/target/product/sabresd_6dq/boot.img $BOOT_IMAGE_BOARD; \
done
out/target/product/sabresd_6dq/boot.img maxsize=17128320 blocksize=4224 total=8189223 reserve=173184
out/target/product/sabresd_6dq/boot.img maxsize=17128320 blocksize=4224 total=8189223 reserve=173184
out/target/product/sabresd_6dq/boot.img maxsize=17128320 blocksize=4224 total=8189223 reserve=173184
out/target/product/sabresd_6dq/boot.img maxsize=17128320 blocksize=4224 total=8191271 reserve=173184
----- Making recovery image ------
Copying baseline ramdisk...
Modifying ramdisk contents...
for dtsplat in imx6q:imx6q-sabresd.dtb imx6dl:imx6dl-sabresd.dtb imx6q-ldo:imx6q-sabresd-ldo.dtb imx6qp:imx6qp-sabresd.dtb; do \
DTS_PLATFORM=`echo $dtsplat | cut -d':' -f1`; \
DTS_BOARD=`echo $dtsplat | cut -d':' -f2`; \
RECOVERY_IMAGE_BOARD=out/target/product/sabresd_6dq/recovery-$DTS_PLATFORM.img; \
out/host/linux-x86/bin/mkbootimg --kernel out/target/product/sabresd_6dq/kernel --ramdisk out/target/product/sabresd_6dq/ramdisk-recovery.img --cmdline "console=ttymxc0,115200 init=/init video=mxcfb0:dev=ldb,bpp=32 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off vmalloc=256M androidboot.console=ttymxc0 consoleblank=0 androidboot.hardware=freescale cma=384M" --base 0x14000000 --second out/target/product/sabresd_6dq/$DTS_BOARD --output out/target/product/sabresd_6dq/recovery.img; \
if [ true = true ]; then \
out/host/linux-x86/bin/boot_signer /recovery out/target/product/sabresd_6dq/recovery.img build/target/product/security/verity.pk8 build/target/product/security/verity.x509.pem out/target/product/sabresd_6dq/recovery.img; \
fi;\
size=$(for i in out/target/product/sabresd_6dq/recovery.img; do stat --format "%s" "$i" | tr -d '\n'; echo +; done; echo 0); total=$(( $( echo "$size" ) )); printname=$(echo -n "out/target/product/sabresd_6dq/recovery.img" | tr " " +); img_blocksize=4224; twoblocks=$((img_blocksize * 2)); onepct=$(((((17301504 / 100) - 1) / img_blocksize + 1) * img_blocksize)); reserve=$((twoblocks > onepct ? twoblocks : onepct)); maxsize=$((17301504 - reserve)); echo "$printname maxsize=$maxsize blocksize=$img_blocksize total=$total reserve=$reserve"; if [ "$total" -gt "$maxsize" ]; then echo "error: $printname too large ($total > [17301504 - $reserve])"; false; elif [ "$total" -gt $((maxsize - 32768)) ]; then echo "WARNING: $printname approaching size limit ($total now; limit $maxsize)"; fi ; \
cp -f out/target/product/sabresd_6dq/recovery.img $RECOVERY_IMAGE_BOARD; \
done
out/target/product/sabresd_6dq/recovery.img maxsize=17128320 blocksize=4224 total=8797484 reserve=173184
out/target/product/sabresd_6dq/recovery.img maxsize=17128320 blocksize=4224 total=8797484 reserve=173184
out/target/product/sabresd_6dq/recovery.img maxsize=17128320 blocksize=4224 total=8797484 reserve=173184
out/target/product/sabresd_6dq/recovery.img maxsize=17128320 blocksize=4224 total=8799532 reserve=173184
----- Made recovery image: out/target/product/sabresd_6dq/recovery.img --------
Installed file list: out/target/product/sabresd_6dq/installed-files.txt
Target system fs image: out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img
make_ext4fs -s -T -1 -S out/target/product/sabresd_6dq/root/file_contexts -l 374476800 -a system out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img out/target/product/sabresd_6dq/system
Creating filesystem with parameters:
Size: 374476800
Block size: 4096
Blocks per group: 32768
Inodes per group: 7632
Inode size: 256
Journal blocks: 1428
Label:
Blocks: 91425
Block groups: 3
Reserved block group size: 23
Created filesystem with 1304/22896 inodes and 79090/91425 blocks
Running: mkuserimg.sh -s out/target/product/sabresd_6dq/system out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img ext4 system 374476800 out/target/product/sabresd_6dq/root/file_contexts
build_verity_tree -A aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img /tmp/tmpMr__Ct_verity_images/verity.img
system/extras/verity/build_verity_metadata.py 374476800 /tmp/tmpMr__Ct_verity_images/verity_metadata.img c05456d1171333727af2a3f82feb59856e56229fe81c75c90fd2a1359893a438 aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 /dev/block/mmcblk3p5 out/host/linux-x86/bin/verity_signer build/target/product/security/verity.pk8
append2simg out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img /tmp/tmpMr__Ct_verity_images/verity_metadata.img
append2simg out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img /tmp/tmpMr__Ct_verity_images/verity.img
Construct recovery from boot
mkdir -p out/target/product/sabresd_6dq/obj/PACKAGING/recovery_patch_intermediates/
PATH=out/host/linux-x86/bin:$PATH
out/host/linux-x86/bin/imgdiff out/target/product/sabresd_6dq/boot.img out/target/product/sabresd_6dq/recovery.img out/target/product/sabresd_6dq/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p
chunk 0: type 0 start 0 len 7274506
chunk 1: type 2 start 7274506 len 1480704
chunk 2: type 0 start 8142159 len 49112
Construct patches for 3 chunks...
patch 0 is 205 bytes (of 7274506)
patch 1 is 435259 bytes (of 867653)
patch 2 is 594 bytes (of 49112)
chunk 0: normal ( 0, 7274506) 205
chunk 1: deflate ( 7274506, 1476108) 435259 (null)
chunk 2: normal ( 8750614, 48918) 594
Install system fs image: out/target/product/sabresd_6dq/system.img
out/target/product/sabresd_6dq/system.img+out/target/product/sabresd_6dq/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p maxsize=385389312 blocksize=4224 total=323391834 reserve=3894528
#### make completed successfully (53:14 (mm:ss)) ####
三、Android 5.1 生成内核信息解析：
1. 命令行输出信息如下：
Target ram disk: out/target/product/sabresd_6dq/ramdisk.img
Target boot image: out/target/product/sabresd_6dq/boot.img
install -D kernel_imx/arch/arm/boot/zImage out/target/product/sabresd_6dq/kernel
for dtsplat in imx6q:imx6q-sabresd.dtb imx6dl:imx6dl-sabresd.dtb imx6q-ldo:imx6q-sabresd-ldo.dtb imx6qp:imx6qp-sabresd.dtb; do \
DTS_PLATFORM=`echo $dtsplat | cut -d':' -f1`; \
DTS_BOARD=`echo $dtsplat | cut -d':' -f2`; \
install -D kernel_imx/arch/arm/boot/dts/$DTS_BOARD out/target/product/sabresd_6dq/$DTS_BOARD; \
done
make -C kernel_imx modules ARCH=arm CROSS_COMPILE=`pwd`/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi- LOADADDR=0x10008000
2. 整理并解读代码如下：
for dtsplat in imx6q:imx6q-sabresd.dtb imx6dl:imx6dl-sabresd.dtb imx6q-ldo:imx6q-sabresd-ldo.dtb imx6qp:imx6qp-sabresd.dtb; do
DTS_PLATFORM=`echo $dtsplat | cut -d':' -f1`;
DTS_BOARD=`echo $dtsplat | cut -d':' -f2`;
install -D kernel_imx/arch/arm/boot/dts/$DTS_BOARD out/target/product/sabresd_6dq/$DTS_BOARD;
done
3. 由上可知out/target/product/sabresd_6dq/kernel是kernel_imx/arch/arm/boot/zImage文件，同时编译生成的dts在arch/arm/boot/dts目录下面。
四、解读 Target boot image：
1. 命令行输出信息如下：
Target ram disk: out/target/product/sabresd_6dq/ramdisk.img
Target boot image: out/target/product/sabresd_6dq/boot.img
for dtsplat in imx6q:imx6q-sabresd.dtb imx6dl:imx6dl-sabresd.dtb imx6q-ldo:imx6q-sabresd-ldo.dtb imx6qp:imx6qp-sabresd.dtb; do \
DTS_PLATFORM=`echo $dtsplat | cut -d':' -f1`; \
DTS_BOARD=`echo $dtsplat | cut -d':' -f2`; \
BOOT_IMAGE_BOARD=out/target/product/sabresd_6dq/boot-$DTS_PLATFORM.img; \
out/host/linux-x86/bin/mkbootimg --kernel out/target/product/sabresd_6dq/kernel --ramdisk out/target/product/sabresd_6dq/ramdisk.img --cmdline "console=ttymxc0,115200 init=/init video=mxcfb0:dev=ldb,bpp=32 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off vmalloc=256M androidboot.console=ttymxc0 consoleblank=0 androidboot.hardware=freescale cma=384M" --base 0x14000000 --second out/target/product/sabresd_6dq/$DTS_BOARD --output out/target/product/sabresd_6dq/boot.img; \
out/host/linux-x86/bin/boot_signer /boot out/target/product/sabresd_6dq/boot.img build/target/product/security/verity.pk8 build/target/product/security/verity.x509.pem out/target/product/sabresd_6dq/boot.img; \
size=$(for i in out/target/product/sabresd_6dq/boot.img; do stat --format "%s" "$i" | tr -d '\n'; echo +; done; echo 0); total=$(( $( echo "$size" ) )); printname=$(echo -n "out/target/product/sabresd_6dq/boot.img" | tr " " +); img_blocksize=4224; twoblocks=$((img_blocksize * 2)); onepct=$(((((17301504 / 100) - 1) / img_blocksize + 1) * img_blocksize)); reserve=$((twoblocks > onepct ? twoblocks : onepct)); maxsize=$((17301504 - reserve)); echo "$printname maxsize=$maxsize blocksize=$img_blocksize total=$total reserve=$reserve"; if [ "$total" -gt "$maxsize" ]; then echo "error: $printname too large ($total > [17301504 - $reserve])"; false; elif [ "$total" -gt $((maxsize - 32768)) ]; then echo "WARNING: $printname approaching size limit ($total now; limit $maxsize)"; fi ; \
cp -f out/target/product/sabresd_6dq/boot.img $BOOT_IMAGE_BOARD; \
done
out/target/product/sabresd_6dq/boot.img maxsize=17128320 blocksize=4224 total=8189223 reserve=173184
out/target/product/sabresd_6dq/boot.img maxsize=17128320 blocksize=4224 total=8189223 reserve=173184
out/target/product/sabresd_6dq/boot.img maxsize=17128320 blocksize=4224 total=8189223 reserve=173184
out/target/product/sabresd_6dq/boot.img maxsize=17128320 blocksize=4224 total=8191271 reserve=173184
2. 由上可知，ramdisk合成没有给出信息：
1. 参考文档：
1. ramdisk.img及boot.img的生成过程
http://blog.csdn.net/zhijianjingling00/article/details/16841683
2. 修改build/core/Makefile：
......
# We just build this directly to the install location.
INSTALLED_RAMDISK_TARGET := $(BUILT_RAMDISK_TARGET)
$(INSTALLED_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_RAMDISK_FILES) | $(MINIGZIP)
$(call pretty,"Target ram disk: $@")
$(MKBOOTFS) $(TARGET_ROOT_OUT) | $(MINIGZIP) > $@ # 去掉前面的"$(hide)"
......
3. 得到输出信息：
out/host/linux-x86/bin/mkbootfs out/target/product/sabresd_6dq/root | out/host/linux-x86/bin/minigzip > out/target/product/sabresd_6dq/ramdisk.img
2. 整理并解读代码如下：
# for循环迭代以下四种情况：
# 1. dtsplat：imx6q:imx6q-sabresd.dtb
# 2. dtsplat：imx6dl:imx6dl-sabresd.dtb
# 3. dtsplat：imx6q-ldo:imx6q-sabresd-ldo.dtb
# 4. dtsplat：imx6qp:imx6qp-sabresd.dtb
for dtsplat in imx6q:imx6q-sabresd.dtb imx6dl:imx6dl-sabresd.dtb imx6q-ldo:imx6q-sabresd-ldo.dtb imx6qp:imx6qp-sabresd.dtb; do
# 截取dtsplat中的冒号前面的那部分字符，也就是：
# 1. imx6q；
# 2. imx6dl；
# 3. imx6q-ldo；
# 4. imx6qp；
DTS_PLATFORM=`echo $dtsplat | cut -d':' -f1`;
# 截取dtsplat中的冒号后面的那部分字符，也就是：
# 1. imx6q-sabresd.dtb；
# 2. imx6dl-sabresd.dtb；
# 3. imx6q-sabresd-ldo.dtb；
# 4. imx6qp-sabresd.dtb；
DTS_BOARD=`echo $dtsplat | cut -d':' -f2`;
# 合成当前次要生成的boot.img文件名
BOOT_IMAGE_BOARD=out/target/product/sabresd_6dq/boot-$DTS_PLATFORM.img;
# 使用mkbootimg合成boot.img文件，除了dts文件，其他的都是明确的
out/host/linux-x86/bin/mkbootimg --kernel out/target/product/sabresd_6dq/kernel --ramdisk out/target/product/sabresd_6dq/ramdisk.img --cmdline "console=ttymxc0,115200 init=/init video=mxcfb0:dev=ldb,bpp=32 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off vmalloc=256M androidboot.console=ttymxc0 consoleblank=0 androidboot.hardware=freescale cma=384M" --base 0x14000000 --second out/target/product/sabresd_6dq/$DTS_BOARD --output out/target/product/sabresd_6dq/boot.img;
# 这里不是很明确到底要在做什么
out/host/linux-x86/bin/boot_signer /boot out/target/product/sabresd_6dq/boot.img build/target/product/security/verity.pk8 build/target/product/security/verity.x509.pem out/target/product/sabresd_6dq/boot.img;
# 接下来这段更多的是校验文件大小是否超出16M，
size=$(
for i in out/target/product/sabresd_6dq/boot.img; do
stat --format "%s" "$i" | tr -d '\n';
echo +;
done;
echo 0
);
total=$(( $( echo "$size" ) ));
printname=$(echo -n "out/target/product/sabresd_6dq/boot.img" | tr " " +);
img_blocksize=4224;
twoblocks=$((img_blocksize * 2));
onepct=$(((((17301504 / 100) - 1) / img_blocksize + 1) * img_blocksize));
reserve=$((twoblocks > onepct ? twoblocks : onepct));
maxsize=$((17301504 - reserve));
echo "$printname maxsize=$maxsize blocksize=$img_blocksize total=$total reserve=$reserve";
if [ "$total" -gt "$maxsize" ]; then
echo "error: $printname too large ($total > [17301504 - $reserve])";
false;
elif [ "$total" -gt $((maxsize - 32768)) ]; then
echo "WARNING: $printname approaching size limit ($total now; limit $maxsize)";
fi ;
# 以上检查都正常，拷贝文件
cp -f out/target/product/sabresd_6dq/boot.img $BOOT_IMAGE_BOARD;
done
3. 和上面的shell脚本对比，输出信息正常：
out/target/product/sabresd_6dq/boot.img maxsize=17128320 blocksize=4224 total=8189223 reserve=173184
out/target/product/sabresd_6dq/boot.img maxsize=17128320 blocksize=4224 total=8189223 reserve=173184
out/target/product/sabresd_6dq/boot.img maxsize=17128320 blocksize=4224 total=8189223 reserve=173184
out/target/product/sabresd_6dq/boot.img maxsize=17128320 blocksize=4224 total=8191271 reserve=173184
五、解读 Making recovery image ：
1. 命令行输出信息如下：
----- Making recovery image ------
Copying baseline ramdisk...
Modifying ramdisk contents...
for dtsplat in imx6q:imx6q-sabresd.dtb imx6dl:imx6dl-sabresd.dtb imx6q-ldo:imx6q-sabresd-ldo.dtb imx6qp:imx6qp-sabresd.dtb; do \
DTS_PLATFORM=`echo $dtsplat | cut -d':' -f1`; \
DTS_BOARD=`echo $dtsplat | cut -d':' -f2`; \
RECOVERY_IMAGE_BOARD=out/target/product/sabresd_6dq/recovery-$DTS_PLATFORM.img; \
out/host/linux-x86/bin/mkbootimg --kernel out/target/product/sabresd_6dq/kernel --ramdisk out/target/product/sabresd_6dq/ramdisk-recovery.img --cmdline "console=ttymxc0,115200 init=/init video=mxcfb0:dev=ldb,bpp=32 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off vmalloc=256M androidboot.console=ttymxc0 consoleblank=0 androidboot.hardware=freescale cma=384M" --base 0x14000000 --second out/target/product/sabresd_6dq/$DTS_BOARD --output out/target/product/sabresd_6dq/recovery.img; \
if [ true = true ]; then \
out/host/linux-x86/bin/boot_signer /recovery out/target/product/sabresd_6dq/recovery.img build/target/product/security/verity.pk8 build/target/product/security/verity.x509.pem out/target/product/sabresd_6dq/recovery.img; \
fi;\
size=$(for i in out/target/product/sabresd_6dq/recovery.img; do stat --format "%s" "$i" | tr -d '\n'; echo +; done; echo 0); total=$(( $( echo "$size" ) )); printname=$(echo -n "out/target/product/sabresd_6dq/recovery.img" | tr " " +); img_blocksize=4224; twoblocks=$((img_blocksize * 2)); onepct=$(((((17301504 / 100) - 1) / img_blocksize + 1) * img_blocksize)); reserve=$((twoblocks > onepct ? twoblocks : onepct)); maxsize=$((17301504 - reserve)); echo "$printname maxsize=$maxsize blocksize=$img_blocksize total=$total reserve=$reserve"; if [ "$total" -gt "$maxsize" ]; then echo "error: $printname too large ($total > [17301504 - $reserve])"; false; elif [ "$total" -gt $((maxsize - 32768)) ]; then echo "WARNING: $printname approaching size limit ($total now; limit $maxsize)"; fi ; \
cp -f out/target/product/sabresd_6dq/recovery.img $RECOVERY_IMAGE_BOARD; \
done
out/target/product/sabresd_6dq/recovery.img maxsize=17128320 blocksize=4224 total=8797484 reserve=173184
out/target/product/sabresd_6dq/recovery.img maxsize=17128320 blocksize=4224 total=8797484 reserve=173184
out/target/product/sabresd_6dq/recovery.img maxsize=17128320 blocksize=4224 total=8797484 reserve=173184
out/target/product/sabresd_6dq/recovery.img maxsize=17128320 blocksize=4224 total=8799532 reserve=173184
----- Made recovery image: out/target/product/sabresd_6dq/recovery.img --------
2. 整理并解读代码如下：
# for循环迭代以下四种情况：
# 1. dtsplat：imx6q:imx6q-sabresd.dtb
# 2. dtsplat：imx6dl:imx6dl-sabresd.dtb
# 3. dtsplat：imx6q-ldo:imx6q-sabresd-ldo.dtb
# 4. dtsplat：imx6qp:imx6qp-sabresd.dtb
for dtsplat in imx6q:imx6q-sabresd.dtb imx6dl:imx6dl-sabresd.dtb imx6q-ldo:imx6q-sabresd-ldo.dtb imx6qp:imx6qp-sabresd.dtb; do
# 截取dtsplat中的冒号前面的那部分字符，也就是：
# 1. imx6q；
# 2. imx6dl；
# 3. imx6q-ldo；
# 4. imx6qp；
DTS_PLATFORM=`echo $dtsplat | cut -d':' -f1`;
# 截取dtsplat中的冒号后面的那部分字符，也就是：
# 1. imx6q-sabresd.dtb；
# 2. imx6dl-sabresd.dtb；
# 3. imx6q-sabresd-ldo.dtb；
# 4. imx6qp-sabresd.dtb；
DTS_BOARD=`echo $dtsplat | cut -d':' -f2`;
# 合成当前次要生成的recovery.img文件名
RECOVERY_IMAGE_BOARD=out/target/product/sabresd_6dq/recovery-$DTS_PLATFORM.img;
# 使用mkbootimg合成recovery.img文件，除了dts文件，其他的都是明确的，请对比boot.img合成的命令，几乎一样
# out/host/linux-x86/bin/mkbootimg --kernel out/target/product/sabresd_6dq/kernel --ramdisk out/target/product/sabresd_6dq/ramdisk.img --cmdline "console=ttymxc0,115200 init=/init video=mxcfb0:dev=ldb,bpp=32 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off vmalloc=256M androidboot.console=ttymxc0 consoleblank=0 androidboot.hardware=freescale cma=384M" --base 0x14000000 --second out/target/product/sabresd_6dq/$DTS_BOARD --output out/target/product/sabresd_6dq/boot.img;
out/host/linux-x86/bin/mkbootimg --kernel out/target/product/sabresd_6dq/kernel --ramdisk out/target/product/sabresd_6dq/ramdisk-recovery.img --cmdline "console=ttymxc0,115200 init=/init video=mxcfb0:dev=ldb,bpp=32 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off vmalloc=256M androidboot.console=ttymxc0 consoleblank=0 androidboot.hardware=freescale cma=384M" --base 0x14000000 --second out/target/product/sabresd_6dq/$DTS_BOARD --output out/target/product/sabresd_6dq/recovery.img;
# 加入校验，这里不是很明确到底要在做什么
if [ true = true ]; then
out/host/linux-x86/bin/boot_signer /recovery out/target/product/sabresd_6dq/recovery.img build/target/product/security/verity.pk8 build/target/product/security/verity.x509.pem out/target/product/sabresd_6dq/recovery.img;
fi;
# 接下来这段更多的是校验文件大小是否超出16M，
size=$(
for i in out/target/product/sabresd_6dq/recovery.img; do
stat --format "%s" "$i" | tr -d '\n';
echo +;
done;
echo 0
);
total=$(( $( echo "$size" ) ));
printname=$(echo -n "out/target/product/sabresd_6dq/recovery.img" | tr " " +);
img_blocksize=4224;
twoblocks=$((img_blocksize * 2));
onepct=$(((((17301504 / 100) - 1) / img_blocksize + 1) * img_blocksize));
reserve=$((twoblocks > onepct ? twoblocks : onepct));
maxsize=$((17301504 - reserve));
echo "$printname maxsize=$maxsize blocksize=$img_blocksize total=$total reserve=$reserve";
if [ "$total" -gt "$maxsize" ]; then
echo "error: $printname too large ($total > [17301504 - $reserve])";
false;
elif [ "$total" -gt $((maxsize - 32768)) ]; then
echo "WARNING: $printname approaching size limit ($total now; limit $maxsize)";
fi ;
# 以上检查都正常，拷贝文件
cp -f out/target/product/sabresd_6dq/recovery.img $RECOVERY_IMAGE_BOARD;
done
3. 和上面的shell脚本对比，输出信息正常：
out/target/product/sabresd_6dq/recovery.img maxsize=17128320 blocksize=4224 total=8797484 reserve=173184
out/target/product/sabresd_6dq/recovery.img maxsize=17128320 blocksize=4224 total=8797484 reserve=173184
out/target/product/sabresd_6dq/recovery.img maxsize=17128320 blocksize=4224 total=8797484 reserve=173184
out/target/product/sabresd_6dq/recovery.img maxsize=17128320 blocksize=4224 total=8799532 reserve=173184
六、解读 Target system fs image：
1. 命令行输出信息如下：
Target system fs image: out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img
make_ext4fs -s -T -1 -S out/target/product/sabresd_6dq/root/file_contexts -l 374476800 -a system out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img out/target/product/sabresd_6dq/system
Creating filesystem with parameters:
Size: 374476800
Block size: 4096
Blocks per group: 32768
Inodes per group: 7632
Inode size: 256
Journal blocks: 1428
Label:
Blocks: 91425
Block groups: 3
Reserved block group size: 23
Created filesystem with 1304/22896 inodes and 79090/91425 blocks
Running: mkuserimg.sh -s out/target/product/sabresd_6dq/system out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img ext4 system 374476800 out/target/product/sabresd_6dq/root/file_contexts
build_verity_tree -A aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img /tmp/tmpMr__Ct_verity_images/verity.img
system/extras/verity/build_verity_metadata.py 374476800 /tmp/tmpMr__Ct_verity_images/verity_metadata.img c05456d1171333727af2a3f82feb59856e56229fe81c75c90fd2a1359893a438 aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 /dev/block/mmcblk3p5 out/host/linux-x86/bin/verity_signer build/target/product/security/verity.pk8
append2simg out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img /tmp/tmpMr__Ct_verity_images/verity_metadata.img
append2simg out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img /tmp/tmpMr__Ct_verity_images/verity.img
Construct recovery from boot
mkdir -p out/target/product/sabresd_6dq/obj/PACKAGING/recovery_patch_intermediates/
PATH=out/host/linux-x86/bin:$PATH
out/host/linux-x86/bin/imgdiff out/target/product/sabresd_6dq/boot.img out/target/product/sabresd_6dq/recovery.img out/target/product/sabresd_6dq/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p
chunk 0: type 0 start 0 len 7274506
chunk 1: type 2 start 7274506 len 1480704
chunk 2: type 0 start 8142159 len 49112
Construct patches for 3 chunks...
patch 0 is 205 bytes (of 7274506)
patch 1 is 435259 bytes (of 867653)
patch 2 is 594 bytes (of 49112)
chunk 0: normal ( 0, 7274506) 205
chunk 1: deflate ( 7274506, 1476108) 435259 (null)
chunk 2: normal ( 8750614, 48918) 594
Install system fs image: out/target/product/sabresd_6dq/system.img
out/target/product/sabresd_6dq/system.img+out/target/product/sabresd_6dq/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p maxsize=385389312 blocksize=4224 total=323391834 reserve=3894528
#### make completed successfully (53:14 (mm:ss)) ####
2. 如上可知，最后生成out/target/product/sabresd_6dq/system.img部分内容好像被隐藏了。
3. 为了看到整个程序执行信息，修改源代码：
1. 参考文档：
1. 参考文档：Android——编译体系中的【PRODUCT_COPY_FILES】【ALL_PREBUILT】【BUILD_PREBUILT】
http://blog.csdn.net/jscese/article/details/40615801
2. Android编译系统分析五：system.img的生成过程
http://blog.csdn.net/u011913612/article/details/52503318
3. Android系统镜像文件的打包过程分析
http://blog.csdn.net/Luoshengyang/article/details/20501657
2. 修改build/core/definitions.mk
......
define copy-file-to-target
@mkdir -p $(dir $@)
$(hide) $(ACP) -fp $< $@ # 移除前面的"$(hide)"
endef
......
3. 修改build/core/Makefile
......
INSTALLED_SYSTEMIMAGE := $(PRODUCT_OUT)/system.img
......
systemimage_intermediates := \
$(call intermediates-dir-for,PACKAGING,systemimage)
BUILT_SYSTEMIMAGE := $(systemimage_intermediates)/system.img
......
$(INSTALLED_SYSTEMIMAGE): $(BUILT_SYSTEMIMAGE) $(RECOVERY_FROM_BOOT_PATCH) | $(ACP)
@echo "Install system fs image: $@"
$(copy-file-to-target)
# 为了看到这部分完整的处理流程，将"$(hide)"去掉
# $(hide) $(call assert-max-image-size,$@ $(RECOVERY_FROM_BOOT_PATCH),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE))
$(call assert-max-image-size,$@ $(RECOVERY_FROM_BOOT_PATCH),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE))
systemimage: $(INSTALLED_SYSTEMIMAGE)
......
4. 隐藏的处理信息如下：
Install system fs image: out/target/product/sabresd_6dq/system.img
out/host/linux-x86/bin/acp -fp out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img out/target/product/sabresd_6dq/system.img
size=$(for i in out/target/product/sabresd_6dq/system.img out/target/product/sabresd_6dq/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p; do stat --format "%s" "$i" | tr -d '\n'; echo +; done; echo 0); total=$(( $( echo "$size" ) )); printname=$(echo -n "out/target/product/sabresd_6dq/system.img out/target/product/sabresd_6dq/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p" | tr " " +); img_blocksize=4224; twoblocks=$((img_blocksize * 2)); onepct=$(((((389283840 / 100) - 1) / img_blocksize + 1) * img_blocksize)); reserve=$((twoblocks > onepct ? twoblocks : onepct)); maxsize=$((389283840 - reserve)); echo "$printname maxsize=$maxsize blocksize=$img_blocksize total=$total reserve=$reserve"; if [ "$total" -gt "$maxsize" ]; then echo "error: $printname too large ($total > [389283840 - $reserve])"; false; elif [ "$total" -gt $((maxsize - 32768)) ]; then echo "WARNING: $printname approaching size limit ($total now; limit $maxsize)"; fi
out/target/product/sabresd_6dq/system.img+out/target/product/sabresd_6dq/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p maxsize=385389312 blocksize=4224 total=323391834 reserve=3894528
# @ size=$(for i in out/target/product/sabresd_6dq/system.img out/target/product/sabresd_6dq/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p; do stat --format "%s" "$i" | tr -d '\n'; echo +; done; echo 0); total=$(( $( echo "$size" ) )); printname=$(echo -n "out/target/product/sabresd_6dq/system.img out/target/product/sabresd_6dq/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p" | tr " " +); img_blocksize=4224; twoblocks=$((img_blocksize * 2)); onepct=$(((((389283840 / 100) - 1) / img_blocksize + 1) * img_blocksize)); reserve=$((twoblocks > onepct ? twoblocks : onepct)); maxsize=$((389283840 - reserve)); echo "$printname maxsize=$maxsize blocksize=$img_blocksize total=$total reserve=$reserve"; if [ "$total" -gt "$maxsize" ]; then echo "error: $printname too large ($total > [389283840 - $reserve])"; false; elif [ "$total" -gt $((maxsize - 32768)) ]; then echo "WARNING: $printname approaching size limit ($total now; limit $maxsize)"; fi
#### make completed successfully (52:35 (mm:ss)) ####
5. 整理并解读代码如下：
1. 制作ext4fs文件系统：
make_ext4fs -s -T -1 -S out/target/product/sabresd_6dq/root/file_contexts -l 374476800 -a system out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img out/target/product/sabresd_6dq/system
2. 以下步骤基本上是没什么变量，所以也就不解析了：
mkuserimg.sh -s out/target/product/sabresd_6dq/system out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img ext4 system 374476800 out/target/product/sabresd_6dq/root/file_contexts
build_verity_tree -A aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img /tmp/tmpMr__Ct_verity_images/verity.img
system/extras/verity/build_verity_metadata.py 374476800 /tmp/tmpMr__Ct_verity_images/verity_metadata.img c05456d1171333727af2a3f82feb59856e56229fe81c75c90fd2a1359893a438 aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 /dev/block/mmcblk3p5 out/host/linux-x86/bin/verity_signer build/target/product/security/verity.pk8
append2simg out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img /tmp/tmpMr__Ct_verity_images/verity_metadata.img
append2simg out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img /tmp/tmpMr__Ct_verity_images/verity.img
mkdir -p out/target/product/sabresd_6dq/obj/PACKAGING/recovery_patch_intermediates/
PATH=out/host/linux-x86/bin:$PATH
out/host/linux-x86/bin/imgdiff out/target/product/sabresd_6dq/boot.img out/target/product/sabresd_6dq/recovery.img out/target/product/sabresd_6dq/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p
3. 隐藏信息解读：
# 直接将前面声场的system.img文件拷贝到输出目录中
out/host/linux-x86/bin/acp -fp out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img out/target/product/sabresd_6dq/system.img
# 统计两个文件的大小，并判断system.img文件是否正常，和前面类似，其实没有过多的解析必要
size=$(
for i in out/target/product/sabresd_6dq/system.img out/target/product/sabresd_6dq/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p; do
stat --format "%s" "$i" | tr -d '\n';
echo +;
done;
echo 0
);
total=$(( $( echo "$size" ) ));
# 将两个文件中的空格换成+号
printname=$(echo -n "out/target/product/sabresd_6dq/system.img out/target/product/sabresd_6dq/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p" | tr " " +);
img_blocksize=4224;
twoblocks=$((img_blocksize * 2));
onepct=$(((((389283840 / 100) - 1) / img_blocksize + 1) * img_blocksize));
reserve=$((twoblocks > onepct ? twoblocks : onepct));
maxsize=$((389283840 - reserve));
echo "$printname maxsize=$maxsize blocksize=$img_blocksize total=$total reserve=$reserve";
if [ "$total" -gt "$maxsize" ]; then
echo "error: $printname too large ($total > [389283840 - $reserve])";
false;
elif [ "$total" -gt $((maxsize - 32768)) ]; then
echo "WARNING: $printname approaching size limit ($total now; limit $maxsize)";
fi
七、a51m脚本：
#!/bin/bash
# source build/envsetup.sh && lunch sabresd_6dq-user && make 2>&1 | tee build-log.txt
if [ $# != 1 ]; then
echo "USAGE:"
echo " a51m <ub | bi | fs> "
echo " 1. ub: U-Boot compile."
echo " 2. bi: boot.img compile."
echo " 3. fs: system.img repack"
echo
exit -1
fi
# for U-Boot compile
if [ $1 = "ub" ]; then
for ubootplat in imx6q:mx6qsabresdandroid_config imx6dl:mx6dlsabresdandroid_config imx6qp:mx6qpsabresdandroid_config; do
UBOOT_PLATFORM=`echo $ubootplat | cut -d':' -f1`;
UBOOT_CONFIG=`echo $ubootplat | cut -d':' -f2`;
echo ;
echo ;
make -C bootable/bootloader/uboot-imx/ distclean ARCH=arm CROSS_COMPILE=`pwd`/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-;
make -C bootable/bootloader/uboot-imx/ $UBOOT_CONFIG ARCH=arm CROSS_COMPILE=`pwd`/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-;
make -C bootable/bootloader/uboot-imx/ ARCH=arm CROSS_COMPILE=`pwd`/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-;
echo -e "\tcp bootable/bootloader/uboot-imx/u-boot.imx out/target/product/sabresd_6dq/u-boot-$UBOOT_PLATFORM.imx; "
cp bootable/bootloader/uboot-imx/u-boot.imx out/target/product/sabresd_6dq/u-boot-$UBOOT_PLATFORM.imx;
done
echo -e "\n\033[32mGenerate u-boot.imx Work Over.\033[0m\n"
exit 0
fi
# for boot.img compile
if [ $1 = "bi" ]; then
make -C kernel_imx ARCH=arm CROSS_COMPILE=`pwd`/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi- LOADADDR=0x10008000
echo -e "\n\033[32m[Copy zImage file to target]:\033[0m"
echo -e "\tcp kernel_imx/arch/arm/boot/zImage out/target/product/sabresd_6dq/kernel"
cp kernel_imx/arch/arm/boot/zImage out/target/product/sabresd_6dq/kernel
echo -e "\n\033[32m[Copy dtb file to target]:\033[0m"
for dtsplat in imx6q:imx6q-sabresd.dtb imx6dl:imx6dl-sabresd.dtb imx6q-ldo:imx6q-sabresd-ldo.dtb imx6qp:imx6qp-sabresd.dtb; do
DTS_PLATFORM=`echo $dtsplat | cut -d':' -f1`;
DTS_BOARD=`echo $dtsplat | cut -d':' -f2`;
echo -e "\tcp kernel_imx/arch/arm/boot/dts/$DTS_BOARD out/target/product/sabresd_6dq/$DTS_BOARD"
cp kernel_imx/arch/arm/boot/dts/$DTS_BOARD out/target/product/sabresd_6dq/$DTS_BOARD;
done
echo -e "\n\033[32m[Generate ramdisk.img file to target]:\033[0m"
echo -e "\tout/host/linux-x86/bin/mkbootfs out/target/product/sabresd_6dq/root | out/host/linux-x86/bin/minigzip > out/target/product/sabresd_6dq/ramdisk.img"
out/host/linux-x86/bin/mkbootfs out/target/product/sabresd_6dq/root | out/host/linux-x86/bin/minigzip > out/target/product/sabresd_6dq/ramdisk.img
echo -e "\n\033[32m[Generate boot.img file to target]:\033[0m"
for dtsplat in imx6q:imx6q-sabresd.dtb imx6dl:imx6dl-sabresd.dtb imx6q-ldo:imx6q-sabresd-ldo.dtb imx6qp:imx6qp-sabresd.dtb; do
DTS_PLATFORM=`echo $dtsplat | cut -d':' -f1`;
DTS_BOARD=`echo $dtsplat | cut -d':' -f2`;
BOOT_IMAGE_BOARD=out/target/product/sabresd_6dq/boot-$DTS_PLATFORM.img;
out/host/linux-x86/bin/mkbootimg --kernel out/target/product/sabresd_6dq/kernel --ramdisk out/target/product/sabresd_6dq/ramdisk.img --cmdline "console=ttymxc0,115200 init=/init video=mxcfb0:dev=ldb,bpp=32 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off vmalloc=256M androidboot.console=ttymxc0 consoleblank=0 androidboot.hardware=freescale cma=384M" --base 0x14000000 --second out/target/product/sabresd_6dq/$DTS_BOARD --output out/target/product/sabresd_6dq/boot.img;
out/host/linux-x86/bin/boot_signer /boot out/target/product/sabresd_6dq/boot.img build/target/product/security/verity.pk8 build/target/product/security/verity.x509.pem out/target/product/sabresd_6dq/boot.img;
echo -e "\tcp -f out/target/product/sabresd_6dq/boot.img $BOOT_IMAGE_BOARD"
cp -f out/target/product/sabresd_6dq/boot.img $BOOT_IMAGE_BOARD;
done
echo -e "\n\033[32mGenerate boot.img Work Over.\033[0m\n"
exit 0
fi
# for system.img repack
if [ $1 = "fs" ]; then
make_ext4fs -s -T -1 -S out/target/product/sabresd_6dq/root/file_contexts -l 374476800 -a system out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img out/target/product/sabresd_6dq/system
mkuserimg.sh -s out/target/product/sabresd_6dq/system out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img ext4 system 374476800 out/target/product/sabresd_6dq/root/file_contexts
mkdir -p /tmp/tmpMr__Ct_verity_images
build_verity_tree -A aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img /tmp/tmpMr__Ct_verity_images/verity.img
system/extras/verity/build_verity_metadata.py 374476800 /tmp/tmpMr__Ct_verity_images/verity_metadata.img c05456d1171333727af2a3f82feb59856e56229fe81c75c90fd2a1359893a438 aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 /dev/block/mmcblk3p5 out/host/linux-x86/bin/verity_signer build/target/product/security/verity.pk8
append2simg out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img /tmp/tmpMr__Ct_verity_images/verity_metadata.img
append2simg out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img /tmp/tmpMr__Ct_verity_images/verity.img
mkdir -p out/target/product/sabresd_6dq/obj/PACKAGING/recovery_patch_intermediates/
PATH=out/host/linux-x86/bin:$PATH
out/host/linux-x86/bin/imgdiff out/target/product/sabresd_6dq/boot.img out/target/product/sabresd_6dq/recovery.img out/target/product/sabresd_6dq/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p
out/host/linux-x86/bin/acp -fp out/target/product/sabresd_6dq/obj/PACKAGING/systemimage_intermediates/system.img out/target/product/sabresd_6dq/system.img
echo -e "\n\033[32mGenerate system.img Work Over.\033[0m\n"
exit 0
fi
echo "USAGE:"
echo " a51m <ub | bi | fs> "
echo " 1. ub: U-Boot compile."
echo " 2. bi: boot.img compile."
echo " 3. fs: system.img repack"
echo
