hadoop-0.20.2完全分布式集群
集群规划
准备五台台虚拟机(实验以五台RedHat Enterprise Linux 6.5为例)
防火墙、iptables、和SSH已经在上一篇说过在此就不再赘述,完全分布式相对于伪分布式多了几个注意点,我们按照以下规划步骤来做:
- 配置hosts文件用于解析IP地址与主机名的映射
- 建立hadoop运行账号
- 配置SSH免密码登录
- 下载解压hadoop的安装包
- 配置jdk、hadoop环境变量
- 配置hadoop-env.sh,mapred-site.xml,core-site.xml,hdfs-site.xml,masters,slaves.
- 将配置好的文件复制到其他节点
- 格式化namenode并启动hadoop集群
- 检验集群健康情况
1.配置hosts文件
192.168.186.165 sishen.165
192.168.186.164 sishen.164
192.168.186.163 sishen.163
192.168.186.162 sishen.162
192.168.186.161 sishen.161
[root@sishen ~]# scp /etc/hosts sishen.162:/etc/
[root@sishen ~]# scp /etc/hosts sishen.163:/etc/
[root@sishen ~]# scp /etc/hosts sishen.164:/etc/
[root@sishen ~]# scp /etc/hosts sishen.165:/etc/
使用ping命令检验
[root@sishen ~]# ping -c 2 sishen.162
PING sishen.162 (192.168.186.162) 56(84) bytes of data.
64 bytes from sishen.162 (192.168.186.162): icmp_seq=1 ttl=64 time=29.2 ms
64 bytes from sishen.162 (192.168.186.162): icmp_seq=2 ttl=64 time=0.880 ms
--- sishen.162 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1012ms
rtt min/avg/max/mdev = 0.880/15.040/29.200/14.160 ms
2.建立hadoop运行账户
分别在五台机器上运行以下命令
[root@sishen ~]# useradd hadoop
[root@sishen ~]# echo 123456 | passwd --stdin hadoop
建立hadoop的数据存放目录(注意:分别在五台机器上执行)
[root@sishen ~]# mkdir -p /hadoop-0.20.2/data
[root@sishen ~]# chown -R hadoop:hadoop /hadoop-0.20.2/
[root@sishen ~]# ll -d /hadoop-0.20.2/
drwxr-xr-x 3 hadoop hadoop 4096 Oct 9 14:33 /hadoop-0.20.2/
3.配置SSH免密码登录
分别在五台机器上运行以下命令
[root@sishen ~]# ssh-keygen
……
中间过程直接回车即可
…..
[root@sishen ~]# ssh-copy-id sishen.161
[root@sishen ~]# ssh-copy-id sishen.162
[root@sishen ~]# ssh-copy-id sishen.163
[root@sishen ~]# ssh-copy-id sishen.164
[root@sishen ~]# ssh-copy-id sishen.165
4.解压并配置hadoop软件包
解压hadoop压缩包
[root@sishen ~]# tar -xf hadoop-0.20.2.tar.gz -C /hadoop-0.20.2/
[root@sishen ~]# cd /hadoop-0.20.2/hadoop-0.20.2/conf/
开始配置hadoop
[root@sishen conf]# vim hadoop-env.sh
[root@sishen conf]# vim hdfs-site.xml
[root@sishen conf]# vim mapred-site.xml
[root@sishen conf]# vim core-site.xml
[root@sishen conf]# vim masters
[root@sishen conf]# vim slaves
[root@sishen hadoop-0.20.2]# scp hadoop.tar.gz sishen.162:/hadoop-0.20.2/
[root@sishen hadoop-0.20.2]# scp hadoop.tar.gz sishen.163:/hadoop-0.20.2/
[root@sishen hadoop-0.20.2]# scp hadoop.tar.gz sishen.164:/hadoop-0.20.2/
[root@sishen hadoop-0.20.2]# scp hadoop.tar.gz sishen.165:/hadoop-0.20.2/
启动hadoop集群
[root@sishen ~]# start-all.sh
检测守护进程
发现master上面如下进程
在salve节点上有如下进程
关闭集群
如有疏漏欢迎指正 ^_^!