#region 字段
DispatcherTimer timer;
DispatcherTimer fontTimer;
public int Port = 0;
TestItemsModel ConfigModel = new TestItemsModel();
bool isFirstLoad = true;
string IP = string.Empty;
SocketServer server = null;
// 每次发送的数据长度
const int SEND_DATA_LEN_ONE_TIME = 256;
//字库在SPI Flash中的起始地址
const int FONT_BASE_ADDR_IN_SPI_FLASH = 0X00;
//IC卡数据长度
const int IC_CARD_DATA_LEN = 128;
const int IC_CARD_DRIVER_NAME_LEN = 12;
const int IC_CARD_GENDER_LEN = 2;
const int IC_CARD_IDENTIYT_NUMBER_LEN = 18;
const int IC_CARD_DRIVER_LICENSE_LEN = 18;
const int IC_CARD_DRIVER_LICENSE_LMT_LEN = 3;
const int IC_CARD_DRIVER_LEGAL_CODE_LEN = 18;
const int IC_CARD_RESERVED_STD_EXTEND_LEN = 56;
const int IC_CARD_CHECKSUM_LEN = 4;
const int ACK_TIME_OUT = 10;
const int ERASE_FLASH_ACK_TIME_OUT = 60;
//IC卡数据的起始地址
const int IC_CARD_DATA_BASE_ADDR = 0X00;
const int COM_READ_BUF_LEN = 1024;
const string CMD_READ_24C01_CARD = "#RIC";
const string CMD_READ_SL4442_CARD = "#RSL";
const string CMD_WRITE_24C01_CARD = "#WIC";
const string CMD_WRITE_SL4442_CARD = "#WSL";
const string CMD_CLEAR_SPI_FLASH = "#CLR";
const string CMD_WRITE_SPI_FLASH = "#WW";
bool bIsFontLibInSending = false; //正在发送字库
bool bIsComPortOpen = false;//串口是否打开
bool bIsFlashErase = false; //正在擦除
bool bIsReadingICCard = false;
bool bIsWritingICCard = false;
private static FileStream fs = null;
private static long index = 0;
private static long blockCount;
private static DateTime dt;
int cardType = 0; //diskType" : int , 0--4 分别SD1 -- 镜像盘
int rsType = 0; //RS485 0 MCU 串口 1
DateTime startTime;
DateTime endTime;
byte[] m_pBuffer = null; /* 字库缓存地址程序中动态分配 */
uint m_CurSndPos = 0; /* 当前写的字库地址 */
uint m_CurSPI_Flash_Addr = 0; /* 当前写SPI_Flash的位置地址 */
uint m_LastSndLen = 0; /* 上一次发送的数据长度 */
uint m_FontLibFileLen = 0; /* 字库缓存的长度 */
#endregion
public TestViewModel()
{
TestItemData = new ObservableCollection<TestItemDataModel>();
CurrGPSData = new GPSDataModel();
timer = new DispatcherTimer();
timer.Interval = TimeSpan.FromSeconds(0.5);
timer.Tick += Timer_Tick; ;
fontTimer = new DispatcherTimer();
fontTimer.Interval = TimeSpan.FromSeconds(0.5);
fontTimer.Tick += FontTimer_Tick; ;
LoadedCommand = new RelayCommand(Load);
FontPathCommand = new RelayCommand(FontPath);
CleaningMemoryCommand = new RelayCommand(CleaningMemory);
UpgradeFontCommand = new RelayCommand(UpgradeFont);
OpenPortCommand = new RelayCommand(OpenPort);
HandleCommand = new RelayCommand(HandleTest);
PassCommand = new RelayCommand(OnPass);
NotPassCommand = new RelayCommand(OnNotPass);
ExportTestCommand = new RelayCommand(ExportTest);
StopTestCommand = new RelayCommand(StopTest);
StartTestCommand = new RelayCommand(StartTest);
BtnDes = "打开";
Init();
}
#region Command
public ICommand LoadedCommand { get; private set; }
public ICommand FontPathCommand { get; private set; }
public ICommand CleaningMemoryCommand { get; private set; }
public ICommand UpgradeFontCommand { get; private set; }
public ICommand WriteCardCommand { get; private set; }
public ICommand CardReadingCommand { get; private set; }
public ICommand OpenPortCommand { get; private set; }
public ICommand HandleCommand { get; private set; }
public ICommand PassCommand { get; private set; }
public ICommand NotPassCommand { get; private set; }
public ICommand StopTestCommand { get; private set; }
public ICommand StartTestCommand { get; private set; }
public ICommand ExportTestCommand { get; private set; }
#endregion
private string _TxtMsg;
public string TxtMsg
{
get { return _TxtMsg; }
set { Set(() => TxtMsg, ref _TxtMsg, value); }
}
private string _BtnDes;
public string BtnDes
{
get { return _BtnDes; }
set { Set(() => BtnDes, ref _BtnDes, value); }
}
private string _FilePath;
public string FilePath
{
get { return _FilePath; }
set { Set(() => FilePath, ref _FilePath, value); }
}
private string _LinkMsg;
public string LinkMsg
{
get { return _LinkMsg; }
set { Set(() => LinkMsg, ref _LinkMsg, value); }
}
private Visibility _StartTestVisual = Visibility.Collapsed;
public Visibility StartTestVisual
{
get { return _StartTestVisual; }
set { Set(() => StartTestVisual, ref _StartTestVisual, value); }
}
private Visibility _StopTestVisual = Visibility.Collapsed;
public Visibility StopTestVisual
{
get { return _StopTestVisual; }
set { Set(() => StopTestVisual, ref _StopTestVisual, value); }
}
private Visibility _ExportVisual = Visibility.Collapsed;
public Visibility ExportVisual
{
get { return _ExportVisual; }
set { Set(() => ExportVisual, ref _ExportVisual, value); }
}
private Visibility _ProVisual = Visibility.Collapsed;
public Visibility ProVisual
{
get { return _ProVisual; }
set { Set(() => ProVisual, ref _ProVisual, value); }
}
private int _ProMax ;
public int ProMax
{
get { return _ProMax; }
set { Set(() => ProMax, ref _ProMax, value); }
}
private int _ProVal = 100;
public int ProVal
{
get { return _ProVal; }
set { Set(() => ProVal, ref _ProVal, value); }
}
private GPSDataModel _CurrGPSData;
public GPSDataModel CurrGPSData
{
get { return _CurrGPSData; }
set { Set(() => CurrGPSData, ref _CurrGPSData, value); }
}
private bool _CamManual = false;
public bool CamManual
{
get { return _CamManual; }
set
{
Set(() => CamManual, ref _CamManual, value);
foreach (var item in TestItemData)
{
if (value)
item.ManualVisual = Visibility.Visible;
else
item.ManualVisual = Visibility.Collapsed;
}
}
}
private TestItemDataModel _CurrTestItemDataModel;
public TestItemDataModel CurrTestItemDataModel
{
get { return _CurrTestItemDataModel; }
set { Set(() => CurrTestItemDataModel, ref _CurrTestItemDataModel, value); }
}
private ObservableCollection<TestItemDataModel> _TestItemData = new ObservableCollection<TestItemDataModel>();
public ObservableCollection<TestItemDataModel> TestItemData
{
get { return _TestItemData; }
set { Set(() => TestItemData, ref _TestItemData, value); }
}
private ObservableCollection<TestItemDataModel> _ManualTestItemData = new ObservableCollection<TestItemDataModel>();
public ObservableCollection<TestItemDataModel> ManualTestItemData
{
get { return _ManualTestItemData; }
set { Set(() => ManualTestItemData, ref _ManualTestItemData, value); }
}
private ObservableCollection<KeyValueModel> _SerialPortName;
public ObservableCollection<KeyValueModel> SerialPortName //串口名
{
get { return _SerialPortName; }
set { Set(() => SerialPortName, ref _SerialPortName, value); }
}
private ObservableCollection<KeyValueModel> _BaudRate;
public ObservableCollection<KeyValueModel> BaudRate //波特率
{
get { return _BaudRate; }
set { Set(() => BaudRate, ref _BaudRate, value); }
}
private ObservableCollection<KeyValueModel> _CheckBit;
public ObservableCollection<KeyValueModel> CheckBit //校验位
{
get { return _CheckBit; }
set { Set(() => CheckBit, ref _CheckBit, value); }
}
private ObservableCollection<KeyValueModel> _DataBits;
public ObservableCollection<KeyValueModel> DataBits //数据位
{
get { return _DataBits; }
set { Set(() => DataBits, ref _DataBits, value); }
}
private ObservableCollection<KeyValueModel> _StopBit;
public ObservableCollection<KeyValueModel> StopBit //停止位
{
get { return _StopBit; }
set { Set(() => StopBit, ref _StopBit, value); }
}
private ObservableCollection<KeyValueModel> _Sex;
public ObservableCollection<KeyValueModel> Sex //性别
{
get { return _Sex; }
set { Set(() => Sex, ref _Sex, value); }
}
private Brush _IndicatorLightColor = Brushes.Red;
public Brush IndicatorLightColor
{
get { return _IndicatorLightColor; }
set { Set(() => IndicatorLightColor, ref _IndicatorLightColor, value); }
}
private KeyValueModel _SelectSerialPort;
public KeyValueModel SelectSerialPort
{
get { return _SelectSerialPort; }
set { Set(() => SelectSerialPort, ref _SelectSerialPort, value); }
}
private KeyValueModel _SelectBaudRate;
public KeyValueModel SelectBaudRate
{
get { return _SelectBaudRate; }
set { Set(() => SelectBaudRate, ref _SelectBaudRate, value); }
}
private KeyValueModel _SelectCheckBit;
public KeyValueModel SelectCheckBit
{
get { return _SelectCheckBit; }
set { Set(() => SelectCheckBit, ref _SelectCheckBit, value); }
}
private KeyValueModel _SelectDataBits;
public KeyValueModel SelectDataBits
{
get { return _SelectDataBits; }
set { Set(() => SelectDataBits, ref _SelectDataBits, value); }
}
private KeyValueModel _SelectStopBit;
public KeyValueModel SelectStopBit
{
get { return _SelectStopBit; }
set { Set(() => SelectStopBit, ref _SelectStopBit, value); }
}
private KeyValueModel _SelectSex;
public KeyValueModel SelectSex
{
get { return _SelectSex; }
set { Set(() => SelectSex, ref _SelectSex, value); }
}
#region ByteArray - String ShowTip
private byte[] GetByteArray(string name)
{
return System.Text.Encoding.Default.GetBytes(name);
}
private string GetStrByArray(byte[] array)
{
return System.Text.Encoding.Default.GetString(array);
}
private void ShowTip(string msg)
{
TipWindow win = new TipWindow();
TipWindowViewModel model = new TipWindowViewModel()
{
Message = msg,
ShowConfirm = false
};
win.Show(model);
}
private void UpgradeFont(object o)
{
if (CheckUpdate())
{
dt = DateTime.Now;
fs = new FileStream(FilePath, FileMode.Open, FileAccess.Read);
long m_FontLibFileLen = fs.Length;
if (m_FontLibFileLen == 0)
{
ShowTip("字库文件大小为:0");
return;
}
byte[] byteArray = new byte[m_FontLibFileLen];
fs.Read(byteArray, 0, (int)m_FontLibFileLen);
int m_CurSndPos = 0;
int m_CurSPI_Flash_Addr = 0;
int m_LastSndLen = 0;
if (m_FontLibFileLen < SEND_DATA_LEN_ONE_TIME)
{
m_CurSndPos = 0; // 发送的位置在m_pBuffer中的偏移
m_LastSndLen = (int)m_FontLibFileLen;
SendFontDataToCom((uint)m_CurSPI_Flash_Addr, byteArray, (uint)m_LastSndLen);
bIsFontLibInSending = true;
}
else
{
m_CurSndPos = 0;
m_LastSndLen = SEND_DATA_LEN_ONE_TIME;
SendFontDataToCom((uint)m_CurSPI_Flash_Addr, byteArray, (uint)m_LastSndLen);
bIsFontLibInSending = true;
}
int Range = (int)m_FontLibFileLen / (SEND_DATA_LEN_ONE_TIME); /* 文件长度 */
if (Range == 0) // 说明只需一步即可达到100%
{
Range = 1;
}
else if (Range > 0 && (m_FontLibFileLen % (SEND_DATA_LEN_ONE_TIME)) != 0)
{
Range += 1;
}
LinkMsg = "0%";
startTime = DateTime.Now;
endTime = DateTime.Now;
int AckCmdLen = 1;
byte[] AckCmdBuf = new byte[256];// [256] = { 0 };
while (bIsFontLibInSending) /* 字库升级中 */
{
AckCmdLen = GetAckCmdBuf(AckCmdBuf, 256);
if (AckCmdLen != 0)
{
ParaseFontUpdateAck(AckCmdBuf, AckCmdLen);
startTime = DateTime.Now;
}
else
{
endTime = DateTime.Now;
TimeSpan timeSpan = endTime - startTime; // 两个CTime相减得到CTimeSpan
double nTSeconds = timeSpan.TotalSeconds; // 得到总的秒数
if (nTSeconds > ACK_TIME_OUT)
{
fontTimer.Stop();
bIsFontLibInSending = false;
m_CurSndPos = 0;
m_LastSndLen = 0;
m_CurSPI_Flash_Addr = 0;
TxtMsg = "字库升级超时失败
}
}
}
}
}
private void ParaseFontUpdateAck(byte[] PAckCmdBuf, int Len)
{
byte[] TmpStatues = new byte[128];
string str = GetStrByArray(PAckCmdBuf);
if (str.Contains(CMD_WRITE_SPI_FLASH))
{
uint AckComWriteSPI_Flash_Addr = 0;
uint AckComWriteSPI_Flash_Len = 0;
/* 写入SPI Flash的地址 */
AckComWriteSPI_Flash_Addr |= (uint)(PAckCmdBuf[3] << 24);
AckComWriteSPI_Flash_Addr |= (uint)(PAckCmdBuf[4] << 16);
AckComWriteSPI_Flash_Addr |= (uint)(PAckCmdBuf[5] << 8);
AckComWriteSPI_Flash_Addr |= (uint)(PAckCmdBuf[6] << 0);
AckComWriteSPI_Flash_Len |= (uint)(PAckCmdBuf[7] << 24);
AckComWriteSPI_Flash_Len |= (uint)(PAckCmdBuf[8] << 16);
AckComWriteSPI_Flash_Len |= (uint)(PAckCmdBuf[9] << 8);
AckComWriteSPI_Flash_Len |= (uint)(PAckCmdBuf[10] << 0);
if ((AckComWriteSPI_Flash_Len == m_LastSndLen)
&& (AckComWriteSPI_Flash_Addr == m_CurSPI_Flash_Addr))
{
m_CurSndPos += m_LastSndLen; /* 已经发送的长度累增 */
m_CurSPI_Flash_Addr += m_LastSndLen; /* 当前写文件地址累增 */
if (m_CurSndPos < m_FontLibFileLen)
{
/* 发送剩余的 */
if (m_FontLibFileLen - m_CurSndPos <= SEND_DATA_LEN_ONE_TIME)
{
m_LastSndLen = m_FontLibFileLen - m_CurSndPos;
SendFontDataToCom(m_CurSPI_Flash_Addr, PAckCmdBuf, m_LastSndLen);
bIsFontLibInSending = true;
}
else
{
m_LastSndLen = SEND_DATA_LEN_ONE_TIME;
SendFontDataToCom(m_CurSPI_Flash_Addr, m_pBuffer, m_LastSndLen);
bIsFontLibInSending = true;
}
TxtMsg = $"写入进度:{m_CurSndPos}/{m_FontLibFileLen}";
ProVisual = Visibility.Visible;
ProMax = (int)m_FontLibFileLen;
ProVal = (int)m_CurSndPos;
}
else if (m_CurSndPos == m_FontLibFileLen) /* 写完成 */
{
ProVal = (int)m_CurSndPos;
ProVisual = Visibility.Collapsed;
fontTimer.Stop();
bIsFontLibInSending = false;
m_CurSndPos = 0;
m_LastSndLen = 0;
m_CurSPI_Flash_Addr = 0;
endTime = System.DateTime.Now;
TimeSpan timeSpan = endTime - startTime; // 两个CTime相减得到CTimeSpan
double nTSeconds = timeSpan.TotalSeconds; // 得到总的秒数
TxtMsg = $"字库升级成功,共耗时:{nTSeconds}秒";
if (m_pBuffer != null)
{
m_pBuffer = null;
}
}
//CProgressCtrl *pProgressCtrl = (CProgressCtrl *)GetDlgItem(IDC_PROGRESS_UPDAT
else /* 写Flash 出错 !*/
{
//sprintf(TmpStatues, "MCU写地址出错:AckAddr:%x, AckLen:%d, Addr:%x, Len:%d Pos:%d",\
// AckComWriteSPI_Flash_Addr, AckComWriteSPI_Flash_Len, \
// m_CurSPI_Flash_Addr, m_LastSndLen, m_CurSndPos);
//SetStauesText(TmpStatues);
//SendFontDataToCom(m_CurSPI_Flash_Addr, m_pBuffer + m_CurSndPos, m_LastSndLen);
//bIsFontLibInSending = true;
}
}
}
private byte[] GetByteArray(string name)
{
return System.Text.Encoding.Default.GetBytes(name);
}
private string GetStrByArray(byte[] array)
{
return System.Text.Encoding.Default.GetString(array);
}
private void ParaseFontUpdateAck(byte[] PAckCmdBuf, int Len)
{
byte[] TmpStatues = new byte[128];
string str = GetStrByArray(PAckCmdBuf);
if (str.Contains(CMD_WRITE_SPI_FLASH))
{
uint AckComWriteSPI_Flash_Addr = 0;
uint AckComWriteSPI_Flash_Len = 0;
/* 写入SPI Flash的地址 */
AckComWriteSPI_Flash_Addr |= (uint)(PAckCmdBuf[3] << 24);
AckComWriteSPI_Flash_Addr |= (uint)(PAckCmdBuf[4] << 16);
AckComWriteSPI_Flash_Addr |= (uint)(PAckCmdBuf[5] << 8);
AckComWriteSPI_Flash_Addr |= (uint)(PAckCmdBuf[6] << 0);
AckComWriteSPI_Flash_Len |= (uint)(PAckCmdBuf[7] << 24);
AckComWriteSPI_Flash_Len |= (uint)(PAckCmdBuf[8] << 16);
AckComWriteSPI_Flash_Len |= (uint)(PAckCmdBuf[9] << 8);
AckComWriteSPI_Flash_Len |= (uint)(PAckCmdBuf[10] << 0);
if ((AckComWriteSPI_Flash_Len == m_LastSndLen)
&& (AckComWriteSPI_Flash_Addr == m_CurSPI_Flash_Addr))
{
m_CurSndPos += m_LastSndLen; /* 已经发送的长度累增 */
m_CurSPI_Flash_Addr += m_LastSndLen; /* 当前写文件地址累增 */
if (m_CurSndPos < m_FontLibFileLen)
{
/* 发送剩余的 */
if (m_FontLibFileLen - m_CurSndPos <= SEND_DATA_LEN_ONE_TIME)
{
m_LastSndLen = m_FontLibFileLen - m_CurSndPos;
SendFontDataToCom(m_CurSPI_Flash_Addr, PAckCmdBuf, m_LastSndLen);
bIsFontLibInSending = true;
}
else
{
m_LastSndLen = SEND_DATA_LEN_ONE_TIME;
SendFontDataToCom(m_CurSPI_Flash_Addr, m_pBuffer, m_LastSndLen);
bIsFontLibInSending = true;
}
TxtMsg = $"写入进度:{m_CurSndPos}/{m_FontLibFileLen}";
ProVisual = Visibility.Visible;
ProMax = (int)m_FontLibFileLen;
ProVal = (int)m_CurSndPos;
}
else if (m_CurSndPos == m_FontLibFileLen) /* 写完成 */
{
ProVal = (int)m_CurSndPos;
ProVisual = Visibility.Collapsed;
fontTimer.Stop();
bIsFontLibInSending = false;
m_CurSndPos = 0;
m_LastSndLen = 0;
m_CurSPI_Flash_Addr = 0;
endTime = System.DateTime.Now;
TimeSpan timeSpan = endTime - startTime; // 两个CTime相减得到CTimeSpan
double nTSeconds = timeSpan.TotalSeconds; // 得到总的秒数
TxtMsg = $"字库升级成功,共耗时:{nTSeconds}秒";
if (m_pBuffer != null)
{
m_pBuffer = null;
}
}
//CProgressCtrl *pProgressCtrl = (CProgressCtrl *)GetDlgItem(IDC_PROGRESS_UPDATE);
}
else /* 写Flash 出错 !*/
{
//sprintf(TmpStatues, "MCU写地址出错:AckAddr:%x, AckLen:%d, Addr:%x, Len:%d Pos:%d",\
// AckComWriteSPI_Flash_Addr, AckComWriteSPI_Flash_Len, \
// m_CurSPI_Flash_Addr, m_LastSndLen, m_CurSndPos);
//SetStauesText(TmpStatues);
//SendFontDataToCom(m_CurSPI_Flash_Addr, m_pBuffer + m_CurSndPos, m_LastSndLen);
//bIsFontLibInSending = true;
}
}
}
private void CleaningMemory(object o)
{
if (CheckPortOpen())
{
if (true == bIsFlashErase)
{
ShowTip("正在清除");
return;
}
SendEraseFlashToCom(FONT_BASE_ADDR_IN_SPI_FLASH, 0);
}
}
void SendFontDataToCom(uint WriteAddr, byte[] pSndBuf, uint SndBufLen)
{
/* 发送:#WW + 地址(4字节) + 长度(4字节) ... 数据(长度不超过256) ... 校验和(#W,参与校验,共1字节) + OO# */
byte[] pTmpBuf = null;
uint CalcBufLen = 0;
byte[] pCalcAddr = new byte[512];// [512] = { 0 };
pTmpBuf = pCalcAddr; /* 计算校验和的起始地址 */
/* 命令头 */
pTmpBuf[CalcBufLen++] = (byte)'#';
pTmpBuf[CalcBufLen++] = (byte)'W';
pTmpBuf[CalcBufLen++] = (byte)'W';
/* 写入SPI Flash的地址 */
pTmpBuf[CalcBufLen++] =(byte) ((WriteAddr >> 0) & 0xff);
pTmpBuf[CalcBufLen++] = (byte)((WriteAddr >> 8) & 0xff);
pTmpBuf[CalcBufLen++] = (byte)((WriteAddr >> 16) & 0xff);
pTmpBuf[CalcBufLen++] = (byte)((WriteAddr >> 24) & 0xff);
/* 写入数据的长度 */
pTmpBuf[CalcBufLen++] = (byte)((SndBufLen >> 0) & 0xff);
pTmpBuf[CalcBufLen++] = (byte)((SndBufLen >> 8) & 0xff);
pTmpBuf[CalcBufLen++] = (byte)((SndBufLen >> 16) & 0xff);
pTmpBuf[CalcBufLen++] = (byte)((SndBufLen >> 24) & 0xff);
//真正发送的数据
Array.Copy(pSndBuf, 0, pTmpBuf, CalcBufLen, SndBufLen);
CalcBufLen += SndBufLen;
byte XorSum = XorCheckSum(pCalcAddr, CalcBufLen);
pTmpBuf[CalcBufLen++] = XorSum;
pTmpBuf[CalcBufLen++] = (byte)'O';
pTmpBuf[CalcBufLen++] = (byte)'O';
pTmpBuf[CalcBufLen++] = (byte)'#';
try
{
SerialHelper.serialP.Write(pTmpBuf, 0, (int)CalcBufLen);
}
catch (Exception ex)
{
LogService.Instance.Debug("SendFontDataToCom:" + ex.Message);
TxtMsg = "写字库数据失败!";
}
}
void FontPath(object o)
{
Microsoft.Win32.OpenFileDialog ofd = new Microsoft.Win32.OpenFileDialog();
ofd.DefaultExt = ".*";
ofd.Filter = "字库文件|*.DZK";
if (ofd.ShowDialog() == true)
{
FilePath = ofd.FileName;
}
}
void SendEraseFlashToCom(UInt32 ClearAddr, UInt32 ClearLen)
{
string msg = "正在擦除Flash...";
if (bIsFlashErase)
{
ShowTip(msg);
return;
}
TxtMsg = msg;
bIsFlashErase = true;
/* 发送:#WW + 地址(4字节) + 长度(4字节) ... 数据(长度不超过256) ... 校验和(#W,参与校验,共1字节) + OO# */
byte[] pTmpBuf = null;
byte[] pCalcAddr = null;
uint CalcBufLen = 0;
pTmpBuf = new byte[512];
pCalcAddr = pTmpBuf; /* 计算校验和的起始地址 */
/* 命令头 */
pTmpBuf[CalcBufLen++] = (byte)'#';
pTmpBuf[CalcBufLen++] = (byte)'C';
pTmpBuf[CalcBufLen++] = (byte)'L';
pTmpBuf[CalcBufLen++] = (byte)'R';
/* 写入SPI Flash的地址 */
pTmpBuf[CalcBufLen++] = (byte)((ClearAddr >> 0) & 0xff);
pTmpBuf[CalcBufLen++] = (byte)((ClearAddr >> 8) & 0xff);
pTmpBuf[CalcBufLen++] = (byte)((ClearAddr >> 16) & 0xff);
pTmpBuf[CalcBufLen++] = (byte)((ClearAddr >> 24) & 0xff);
/* 写入数据的长度 */
pTmpBuf[CalcBufLen++] = (byte)((ClearLen >> 0) & 0xff);
pTmpBuf[CalcBufLen++] = (byte)((ClearLen >> 8) & 0xff);
pTmpBuf[CalcBufLen++] = (byte)((ClearLen >> 16) & 0xff);
pTmpBuf[CalcBufLen++] = (byte)((ClearLen >> 24) & 0xff);
byte XorSum = XorCheckSum(pCalcAddr, CalcBufLen);
pTmpBuf[CalcBufLen++] = XorSum;
pTmpBuf[CalcBufLen++] = (byte)'O';
pTmpBuf[CalcBufLen++] = (byte)'O';
pTmpBuf[CalcBufLen++] = (byte)'#';
SerialHelper.serialP.Write(pTmpBuf, 0, (int)CalcBufLen);
}
byte Hex2BCD(byte Val)
{
byte t_h = 0, t_l = 0;
byte temp = 0;
t_h = (byte)(Val / 10);
t_l = (byte)(Val % 10);
temp = (byte)((t_h << 4) + t_l);
return temp;
}
byte BCD2Hex(byte Val)
{
return (byte)(((Val >> 4) & 0xf) * 10 + (Val & 0xf));
}
byte XorCheckSum(byte[] pBuff, uint Len)
{
byte CheckSum = 0;
if (null == pBuff)
{
return CheckSum;
}
for (uint i = 0; i < Len; i++)
{
CheckSum ^= pBuff[i]; //*(pBuff + i);
}
return CheckSum;
}
byte AndCheckSum(byte[] pBuff, uint Len)
{
byte CheckSum = 0;
if (null == pBuff)
{
return CheckSum;
}
for (uint i = 0; i < Len; i++)
{
CheckSum += pBuff[i]; //*(pBuff + i);
}
return CheckSum;
}
#region 清理存储器
int GetAckCmdBuf(byte[] PAckCmdBuf, int Len)
{
int len, Idx;
int AckCmdLen = 0; // 单片机返回的应答个数
byte[] RxDataBuf = new byte[COM_READ_BUF_LEN];// [COM_READ_BUF_LEN] = { 0 }; // 串口读取的缓存
int TotalRcvLen = 0; // 保存当前缓存的个数
/* 以下你可以根据自己的通信协议加入处理代码 */
len = SerialHelper.serialP.Read(PAckCmdBuf, 0, COM_READ_BUF_LEN - TotalRcvLen); //pCtrlComm->Read(RxDataBuf + TotalRcvLen, COM_READ_BUF_LEN - TotalRcvLen);
if (len > 0)
{
TotalRcvLen += len; // 长度累加
}
for (Idx = 0; Idx < TotalRcvLen; Idx++)
{
if (('O' == RxDataBuf[Idx])
&& ('O' == RxDataBuf[Idx + 1])
&& ('#' == RxDataBuf[Idx + 2]))
{
AckCmdLen = (int)Idx + 3;
TotalRcvLen -= (int)AckCmdLen; /* 数据向前移动 */
byte[] pTmpBuf = new byte[RxDataBuf.Length + AckCmdLen];
if (Len >= AckCmdLen)
{
Array.Copy(RxDataBuf, 0, pTmpBuf, 0, RxDataBuf.Length + AckCmdLen);
}
else
{
LinkMsg = "超出缓存限制!";
AckCmdLen = 0;
}
for (int TmpIdx = 0; TmpIdx < TotalRcvLen; TmpIdx++)
{
RxDataBuf[TmpIdx] = pTmpBuf[TmpIdx];
}
break;
}
}
return AckCmdLen;
}
