华为交换机配置入门（二）

IP配置入门

#修改设备名称
<Huawei>system-view
[Huawei]
[Huawei]sysname R1
[R1]

#为物理端口配置IP地址
[R1]interface GigabitEthernet 0/0/0
[R1-GigabitEthernet0/0/0]ip address 10.1.1.1 24
[R1-GigabitEthernet0/0/0]undo shutdown

#查看接口与IP相关摘要信息
[R1-GigabitEthernet0/0/0]display ip interface brief
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 2
The number of interface that is DOWN in Physical is 2
The number of interface that is UP in Protocol is 2
The number of interface that is DOWN in Protocol is 2

Interface IP Address/Mask Physical Protocol
GigabitEthernet0/0/0 10.1.1.1/24 up up
GigabitEthernet0/0/1 unassigned down down
GigabitEthernet0/0/2 unassigned down down
NULL0 unassigned up up(s)

#查看路由表
<R1>display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 7 Routes : 7

Destination/Mask Proto Pre Cost Flags NextHop Interface

10.1.1.0/24 Direct 0 0 D 10.1.1.1 GigabitEthernet
0/0/0
10.1.1.1/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
10.1.1.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
127.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0