VMware Workstation子网划分及bond配置案例

　　　　　　　　　　VMware Workstation子网划分及bond配置案例

　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　作者：尹正杰

版权声明：原创作品，谢绝转载！否则将追究法律责任。

 

 

一.子网划分

1>.对nat网络进行子网划分

2>.对仅主机网络进行子网划分

 

 

二.添加四块网卡并配置bond模式

1>.添加四块网卡

2>.对四块网卡进行配置

[root@openstack.yinzhengjie.org.cn ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 
BOOTPROTO=static
NAME=eth0
DEVICE=eth0
ONBOOT=yes
NM_CONTROLLED=no
MASTER=bond0
USERCTL=no
SLAVE=yes
[root@openstack.yinzhengjie.org.cn ~]# 
[root@openstack.yinzhengjie.org.cn ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
TYPE=Ethernet
BOOTPROTO=static
NAME=eth1
DEVICE=eth1
ONBOOT=yes
NM_CONTROLLED=no
MASTER=bond1
USERCTL=no
SLAVE=yes
[root@openstack.yinzhengjie.org.cn ~]# 
[root@openstack.yinzhengjie.org.cn ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth2
TYPE=Ethernet
BOOTPROTO=static
NAME=eth2
DEVICE=eth2
ONBOOT=yes
NM_CONTROLLED=no
MASTER=bond0
USERCTL=no
SLAVE=yes
[root@openstack.yinzhengjie.org.cn ~]# 
[root@openstack.yinzhengjie.org.cn ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth3 
TYPE=Ethernet
BOOTPROTO=static
NAME=eth3
DEVICE=eth3
ONBOOT=yes
NM_CONTROLLED=no
MASTER=bond1
USERCTL=no
SLAVE=yes
[root@openstack.yinzhengjie.org.cn ~]# 
[root@openstack.yinzhengjie.org.cn ~]# 

3>.配置bond卡

[root@openstack.yinzhengjie.org.cn ~]# cat /etc/sysconfig/network-scripts/ifcfg-bond0 
TYPE=Ethernet
BOOTPROTO=static
DEVICE=bond0
ONBOOT=yes
BONDING_MASTER=yes
BONDING_OPTS="miimon=100 mode=1"
IPADDR=192.168.7.111
NETMASK=255.255.248.0
GATEWAY=192.168.7.254
DNS1=192.168.7.254
[root@openstack.yinzhengjie.org.cn ~]# 
[root@openstack.yinzhengjie.org.cn ~]# cat /etc/sysconfig/network-scripts/ifcfg-bond1
TYPE=Ethernet
BOOTPROTO=static
NAME=bond1
DEVICE=bond1
ONBOOT=yes
BONDING_MASTER=yes
BONDING_OPTS="miimon=100 mode=1"
IPADDR=172.30.7.111
NETMASK=255.255.248.0
[root@openstack.yinzhengjie.org.cn ~]# 
[root@openstack.yinzhengjie.org.cn ~]# 

 

三.验证bond模式

1>.查看IP地址信息

2>.将eth3网卡关闭

[root@openstack.yinzhengjie.org.cn ~]# ifconfig eth3 down
[root@openstack.yinzhengjie.org.cn ~]# 
[root@openstack.yinzhengjie.org.cn ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 state UP qlen 1000
    link/ether 00:0c:29:4a:57:78 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::20c:29ff:fe4a:5778/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond1 state UP qlen 1000
    link/ether 00:0c:29:4a:57:82 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::20c:29ff:fe4a:5782/64 scope link 
       valid_lft forever preferred_lft forever
4: eth2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 state UP qlen 1000
    link/ether 00:0c:29:4a:57:78 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::20c:29ff:fe4a:5778/64 scope link 
       valid_lft forever preferred_lft forever
5: eth3: <BROADCAST,MULTICAST,SLAVE> mtu 1500 qdisc pfifo_fast master bond1 state DOWN qlen 1000
    link/ether 00:0c:29:4a:57:82 brd ff:ff:ff:ff:ff:ff
6: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
    link/ether 00:0c:29:4a:57:78 brd ff:ff:ff:ff:ff:ff
    inet 192.168.7.111/21 brd 192.168.7.255 scope global bond0
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe4a:5778/64 scope link tentative dadfailed 
       valid_lft forever preferred_lft forever
7: bond1: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
    link/ether 00:0c:29:4a:57:82 brd ff:ff:ff:ff:ff:ff
    inet 172.30.7.111/21 brd 172.30.7.255 scope global bond1
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe4a:5782/64 scope link tentative dadfailed 
       valid_lft forever preferred_lft forever
[root@openstack.yinzhengjie.org.cn ~]# 

3>.验证外网可以ping通