H3C 模拟器 pc与sw直连 开启telnet

如图所示

1 在pc上添加虚拟网卡，与上一章节的添加方式相同

配置pc的ip地址

10.17.4.3

255.255.252.0

2 sw设置

<sw1>system-view
[sw1]vlan 10
[sw1-vlan10]int vlan 10
[sw1-Vlan-interface10]ip address 10.17.7.253 22
[sw1-Vlan-interface10]qu
[sw1]user-interface vty 0 4
[sw1-line-vty0-4]authentication-mode scheme
[sw1-line-vty0-4]quit
[sw1]local-user yhq
New local user added.
[sw1-luser-manage-yhq]password simple 123
[sw1-luser-manage-yhq]service-type telnet
[sw1-luser-manage-yhq]authorization-attribute user-role level-3
[sw1-luser-manage-yhq]qu
[sw1]ip route-static 0.0.0.0 0.0.0.0 10.17.4.3
[sw1]vlan 10
[sw1-vlan10]port g1/0/1

在pc的cmd窗口

telnet 10.17.7.253

##Console口登陆
system-view
user-interface aux 0
authentication-mode scheme
quit
local-user test
password simple 123
dis this
service-type terminal
authorization-attribute user-role level-15