服务器 apache配置https,http强制跳转https(搭建http与https共存)

公司linux服务器上的nginx的已经改成https了，现在还剩下一个windows云服务器没配置。

环境 windows wampserver2.5 64位

1.腾讯云申请的ssl

包含三个文件：

 

3_www.pdwbwx.com.key
2_www.pdwbwx.com.crt
1_root_bundle.crt

 

2.将这三个文件放在apache安装目录下的config/extra/key文件夹中， key文件夹和httpd-ssl.conf 同级，key文件夹要自己创建。

 

3.修改httpd.conf

 

LoadModule socache_dbm_module modules/mod_socache_dbm.so

LoadModule socache_shmcb_module modules/mod_socache_shmcb.so

LoadModule ssl_module modules/mod_ssl.so

Include conf/extra/httpd-ssl.conf

 

将上面四句的注释去掉。

4.修改extra文件夹下面的 httpd-ssl.conf（这个很重要，修改不对的话，apache启动不了）

 

 

#
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailed information about these
# directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html>
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Required modules: mod_log_config, mod_setenvif, mod_ssl,
# socache_shmcb_module (for default value of SSLSessionCache)

#
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512


#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
Listen 443

##
## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##

# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
#SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5

#--
SSLCipherSuite ECDHE-RSA-AES128-GCM-SHA256:ECDHE:ECDH:AES:HIGH:!NULL:!aNULL:!MD5:!ADH:!RC4
SSLProxyCipherSuite HIGH:MEDIUM:!MD5:!RC4
SSLHonorCipherOrder on
SSLProtocol TLSv1 +TLSv1.1 +TLSv1.2
SSLProxyProtocol all -SSLv3
#---

# Speed-optimized SSL Cipher configuration:
# If speed is your main concern (on busy HTTPS servers e.g.),
# you might want to force clients to specific, performance
# optimized ciphers. In this case, prepend those ciphers
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
# Caveat: by giving precedence to RC4-SHA and AES128-SHA
# (as in the example below), most connections will no longer
# have perfect forward secrecy - if the server's key is
# compromised, captures of past or future traffic must be
# considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on

# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is an internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin

# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
#SSLSessionCache "dbm:c:/Apache24/logs/ssl_scache"
#-这个不好用就换上面的-
SSLSessionCache "shmcb:c:/Apache24/logs/ssl_scache(512000)"
#--
SSLSessionCacheTimeout 300

##
## SSL Virtual Host Context
##
<VirtualHost _default_:443>

# General setup for the virtual host
#--
DocumentRoot "E:\wamp\www\domain"
ServerName www.domain.com:443
ServerAdmin admin@www.domain.com
ErrorLog "E:\wamp\bin\apache\apache2.4.9\logs\error.log"
TransferLog "E:\wamp\bin\apache\apache2.4.9\logs\access.log"
#--
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on

# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)
# require an ECC certificate which can also be configured in
# parallel.
#--
SSLCertificateFile "E:\wamp\bin\apache\apache2.4.9\conf\extra\key\2_www.domain.com.crt"
#--
#SSLCertificateFile "c:/Apache24/conf/server-dsa.crt"
#SSLCertificateFile "c:/Apache24/conf/server-ecc.crt"

# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
# ECC keys, when in use, can also be configured in parallel
#--
SSLCertificateKeyFile "E:\wamp\bin\apache\apache2.4.9\conf\extra\key\3_www.domain.com.key"
#--
#SSLCertificateKeyFile "c:/Apache24/conf/server-dsa.key"
#SSLCertificateKeyFile "c:/Apache24/conf/server-ecc.key"

# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convenience.
#--
SSLCertificateChainFile "E:\wamp\bin\apache\apache2.4.9\conf\extra\key\1_root_bundle.crt"
#--
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath "c:/Apache24/conf/ssl.crt"
#SSLCACertificateFile "c:/Apache24/conf/ssl.crt/ca-bundle.crt"

# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded).
# The CRL checking mode needs to be configured explicitly
# through SSLCARevocationCheck (defaults to "none" otherwise).
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath "c:/Apache24/conf/ssl.crl"
#SSLCARevocationFile "c:/Apache24/conf/ssl.crl/ca-bundle.crl"
#SSLCARevocationCheck chain

# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10

# TLS-SRP mutual authentication:
# Enable TLS-SRP and set the path to the OpenSSL SRP verifier
# file (containing login information for SRP user accounts).
# Requires OpenSSL 1.0.1 or newer. See the mod_ssl FAQ for
# detailed instructions on creating this file. Example:
# "openssl srp -srpvfile c:/Apache24/conf/passwd.srpv -add username"
#SSLSRPVerifierFile "c:/Apache24/conf/passwd.srpv"

# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>

# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
#--
<Directory "E:\wamp\bin\apache\apache2.4.9\cgi-bin">
#--
SSLOptions +StdEnvVars
</Directory>

# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is sent or allowed to be received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-5]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0

# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
#--
CustomLog "E:\wamp\bin\apache\apache2.4.9\logs\ssl_request.log" \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
#--
</VirtualHost>
 

 

 

 

 

这个里面的注释太多了，一个一个对着修改就好啦，domain是自己的域名，还有日志文件的路径最好修改成对应自己apache安装目录下的logs文件夹，不然后面检查的时候会报错。

 

修改好以后，可以先尝试重启wampserver，如果一直黄，这个时候就可以把第3步里的include 那个给注释掉，然后再重启，如果重启成功，说明还是第四步的httpd-ssl.conf的配置有问题，

 

这个时候可以打开 cmd窗口，进入apache安装目录下的bin文件夹 然后输入命令 httpd -t  检查错误， 提示错误就根据错误修改， 如果是ok 那就代表没有语法错误，检查一下有没有漏掉的内容，确认无误后即可重启wampserver，

 

我通过 httpd -t 检查结果是ok 以后 wampserver就可以正常运行了，这个时候 用https开头 就可以访问项目了，当然，访问项目可能绿色小锁还是带黄色感叹号，这个时候就要更改页面上的http链接，模板里面body体里面的所有http都换成https以后，网站就是绿色小锁了，多半都是图片的链接。

 

2.apache 配置服务器http重定向到https

 

修改apache 配置文件httpd.conf

1.去掉LoadModule rewrite_module modules/mod_rewrite.so 前面的#号

2.找到

 

Directory "/var/www/html/app/src/htdocs_www">


#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
#
AllowOverride All
#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all
# 新增
RewriteEngine on
RewriteCond %{SERVER_PORT} !^443$
RewriteRule ^(.*)?$ https://%{SERVER_NAME}%{REQUEST_URI} [L,R]
</Directory>
按照这个来配置的，结果就是当前服务器下所有的项目都会强制跳转，如果你的服务器上只挂了一个项目，那就没问题，如果是多个，并且有http不想跳转https 就要利用.htaccess 文件

 

 

3.Apache 配置 单个项目 http重定向到https

 

1.还是和上面一样，在httpd.conf去掉下面这一句的#

LoadModule rewrite_module modules/mod_rewrite.so
 

 

 

 

2.新建.htaccess文件(windows系统就是新建 .htaccess. 文件，后面加个 . 就可以创建了)

 

然后输入如下规则

 

RewriteEngine on
RewriteCond %{HTTP_HOST} ^www.domain.com [NC]
RewriteCond %{SERVER_PORT} !^443$
RewriteRule ^(.*)$ https://%{SERVER_NAME}%{REQUEST_URI} [L,R]

上面的作用就是 开启url重写，当 域名是www.domain.com ，并且端口不是 443 就进行永久重定向到https://www.domain.com/............(参数省略)

 

这个domain根据自己的网址修改。

 

修改好以后把 .htaccess 文件 放到你的项目的根目录下（比如我是www/myproject， 我就放到myproject文件夹里），重启apache 即可实现重定向。

 

 

 

有帮助的话，点个赞，谢谢

vim /usr/local/apache/conf/httpd.conf

 

3-1 .Apache 配置 单个项目 http重定向到https (补充，真正的实现单个项目 http重定向https ，如下图，亲测)

在 .htaccess中

<IfModule mod_rewrite.c>
Options +FollowSymlinks -Multiviews
RewriteEngine on
RewriteCond %{HTTP_HOST} ^xx.xxxx.com [NC]
RewriteCond %{SERVER_PORT} !^443$
RewriteRule ^(.*)$ https://%{SERVER_NAME}%{REQUEST_URI} [L,R]

RewriteRule ^(.*)$ index.php?/$1 [QSA,PT,L]
</IfModule>

 

 

4: 种方案

<IfModule mod_rewrite.c>
Options +FollowSymlinks -Multiviews
RewriteEngine On

RewriteCond %{REQUEST_FILENAME} !-d
RewriteCond %{REQUEST_FILENAME} !-f
RewriteRule ^(.*)$ index.php?/$1 [QSA,PT,L]

RewriteCond %{HTTP_HOST} ^www.xxxx.club [NC]
RewriteCond %{SERVER_PORT} !^443$
RewriteRule ^(.*)$ https://%{SERVER_NAME}%{REQUEST_URI} [L,R]
</IfModule>

 

 

 

--------------------------搭建http与https共存(完整效果图)--------------------------------

a : 去/usr/local/apache/conf/extra 下找到 httpd-ssl.conf 注销 里面原来的 <VirtualHost _default_:443> </VirtualHost >

 

 

b: 在httpd-ssl.conf 底部新增如下 VirttalHost 

 

294 <VirtualHost 0.0.0.0:443>
295 DocumentRoot "/var/www/xxxx/public"
296 ServerName ah.xxxx.club
297 SSLEngine on
298 SSLCertificateFile /usr/local/apache/conf/ah/xxxx.club.crt
299 SSLCertificateKeyFile /usr/local/apache/conf/ah/3xxxxx.club.key
300 SSLCertificateChainFile /usr/local/apache/conf/ah/1xxxxxbundle.crt
301 </VirtualHost>

 

 

c:编辑 /usr/local/apache/conf 下的  httpd.conf ，

<VirtualHost *:80>
ServerName ah.xxxx.club
DocumentRoot "/var/www/xxxx/public"
</VirtualHost>

<VirtualHost *:80>
ServerName blog.xxxx.club
DocumentRoot "/var/www/xxxx/public"
</VirtualHost>

 

d: 编辑 单个项目 thinkphp5下的 .htaccess   如下图

<IfModule mod_rewrite.c>
Options +FollowSymlinks -Multiviews
RewriteEngine On

RewriteCond %{REQUEST_FILENAME} !-d
RewriteCond %{REQUEST_FILENAME} !-f
RewriteRule ^(.*)$ index.php?/$1 [QSA,PT,L]

RewriteCond %{HTTP_HOST} ^ah.xxxx.club [NC]
RewriteCond %{SERVER_PORT} !^443$
RewriteRule ^(.*)$ https://%{SERVER_NAME}%{REQUEST_URI} [L,R]
</IfModule>

 

 

综合 a,b,c,d 四点 真正的实现单个项目 http重定向https  （效果图）