java打包成windows服务（转）

64位下载地址：
https://www.krenger.ch/blog/tag/java-service-wrapper/

我的配置：spring boot

#encoding=UTF-8
# Configuration files must begin with a line specifying the encoding
# of the the file.
#
# NOTE - Please use src/conf/wrapper.conf.in as a template for your
# own application rather than the values used for the
# TestWrapper sample.

#********************************************************************
# Wrapper License Properties (Ignored by Community Edition)
#********************************************************************
# Professional and Standard Editions of the Wrapper require a valid
# License Key to start. Licenses can be purchased or a trial license
# requested on the following pages:
# http://wrapper.tanukisoftware.com/purchase
# http://wrapper.tanukisoftware.com/trial

# Include file problems can be debugged by leaving only one '#'
# at the beginning of the following line:
##include.debug

# The Wrapper will look for either of the following optional files for a
# valid License Key. License Key properties can optionally be included
# directly in this configuration file.
#include ../conf/wrapper-license.conf
#include ../conf/wrapper-license-%WRAPPER_HOST_NAME%.conf

# The following property will output information about which License Key(s)
# are being found, and can aid in resolving any licensing problems.
#wrapper.license.debug=TRUE

#********************************************************************
# Wrapper Localization
#********************************************************************
# Specify the language and locale which the Wrapper should use.
#wrapper.lang=en_US # en_US or ja_JP

# Specify the location of the language resource files (*.mo).
wrapper.lang.folder=../lang

#********************************************************************
# Wrapper Java Properties
#********************************************************************
# Java Application
# Locate the java binary on the system PATH:
wrapper.java.command=java
# Specify a specific java binary:
#set.JAVA_HOME=/java/path
#wrapper.java.command=%JAVA_HOME%/bin/java

# Tell the Wrapper to log the full generated Java command line.
#wrapper.java.command.loglevel=INFO

# Java Main class. This class must implement the WrapperListener interface
# or guarantee that the WrapperManager class is initialized. Helper
# classes are provided to do this for you.
# See the following page for details:
# http://wrapper.tanukisoftware.com/doc/english/integrate.html
#wrapper.java.mainclass=org.tanukisoftware.wrapper.test.Main
wrapper.java.mainclass=org.springframework.boot.loader.JarLauncher

# Java Classpath (include wrapper.jar) Add class path elements as
# needed starting from 1
wrapper.java.classpath.1=../lib/spider.jar
wrapper.java.classpath.2=../lib/wrapper.jar

# Java Library Path (location of Wrapper.DLL or libwrapper.so)
wrapper.java.library.path.1=../lib

# Java Bits. On applicable platforms, tells the JVM to run in 32 or 64-bit mode.
wrapper.java.additional.auto_bits=TRUE

# Java Additional Parameters
wrapper.java.additional.1=

# Initial Java Heap Size (in MB)
#wrapper.java.initmemory=3

# Maximum Java Heap Size (in MB)
#wrapper.java.maxmemory=64

# Application parameters. Add parameters as needed starting from 1
#wrapper.app.parameter.1=org.springframework.boot.loader.JarLauncher

#********************************************************************
# Wrapper Logging Properties
#********************************************************************
# Enables Debug output from the Wrapper.
# wrapper.debug=TRUE

# Format of output for the console. (See docs for formats)
wrapper.console.format=PM

# Log Level for console output. (See docs for log levels)
wrapper.console.loglevel=INFO

# Log file to use for wrapper output logging.
wrapper.logfile=../logs/wrapper.log

# Format of output for the log file. (See docs for formats)
wrapper.logfile.format=LPTM

# Log Level for log file output. (See docs for log levels)
wrapper.logfile.loglevel=INFO

# Maximum size that the log file will be allowed to grow to before
# the log is rolled. Size is specified in bytes. The default value
# of 0, disables log rolling. May abbreviate with the 'k' (kb) or
# 'm' (mb) suffix. For example: 10m = 10 megabytes.
wrapper.logfile.maxsize=0

# Maximum number of rolled log files which will be allowed before old
# files are deleted. The default value of 0 implies no limit.
wrapper.logfile.maxfiles=0

# Log Level for sys/event log output. (See docs for log levels)
wrapper.syslog.loglevel=NONE

#********************************************************************
# Wrapper General Properties
#********************************************************************
# Allow for the use of non-contiguous numbered properties
wrapper.ignore_sequence_gaps=TRUE

# Do not start if the pid file already exists.
wrapper.pidfile.strict=TRUE

# Title to use when running as a console
wrapper.console.title=Test Wrapper Sample Application

#********************************************************************
# Wrapper JVM Checks
#********************************************************************
# Detect DeadLocked Threads in the JVM. (Requires Standard Edition)
wrapper.check.deadlock=TRUE
wrapper.check.deadlock.interval=10
wrapper.check.deadlock.action=RESTART
wrapper.check.deadlock.output=FULL

# Out Of Memory detection.
# (Ignore output from dumping the configuration to the console. This is only needed by the TestWrapper sample application.)
wrapper.filter.trigger.999=wrapper.filter.trigger.*java.lang.OutOfMemoryError
wrapper.filter.allow_wildcards.999=TRUE
wrapper.filter.action.999=NONE
# (Ignore output from dumping the configuration to the console. This is only needed by the TestWrapper sample application.)
wrapper.filter.trigger.999=wrapper.filter.trigger.*java.lang.OutOfMemoryError
wrapper.filter.allow_wildcards.999=TRUE
wrapper.filter.action.999=NONE
# (Simple match)
wrapper.filter.trigger.1000=java.lang.OutOfMemoryError
# (Only match text in stack traces if -XX:+PrintClassHistogram is being used.)
#wrapper.filter.trigger.1000=Exception in thread "*" java.lang.OutOfMemoryError
#wrapper.filter.allow_wildcards.1000=TRUE
wrapper.filter.action.1000=RESTART

wrapper.filter.message.1000=The JVM has run out of memory.

#********************************************************************
# Wrapper Email Notifications. (Requires Professional Edition)
#********************************************************************
# Common Event Email settings.
#wrapper.event.default.email.debug=TRUE
#wrapper.event.default.email.smtp.host=<SMTP_Host>
#wrapper.event.default.email.smtp.port=25
#wrapper.event.default.email.subject=[%WRAPPER_HOSTNAME%:%WRAPPER_NAME%:%WRAPPER_EVENT_NAME%] Event Notification
#wrapper.event.default.email.sender=<Sender email>
#wrapper.event.default.email.recipient=<Recipient email>

# Configure the log attached to event emails.
#wrapper.event.default.email.attach_log=TRUE
#wrapper.event.default.email.maillog.lines=50
#wrapper.event.default.email.maillog.format=LPTM
#wrapper.event.default.email.maillog.loglevel=INFO

# Enable specific event emails.
#wrapper.event.wrapper_start.email=TRUE
#wrapper.event.jvm_prelaunch.email=TRUE
#wrapper.event.jvm_start.email=TRUE
#wrapper.event.jvm_started.email=TRUE
#wrapper.event.jvm_deadlock.email=TRUE
#wrapper.event.jvm_stop.email=TRUE
#wrapper.event.jvm_stopped.email=TRUE
#wrapper.event.jvm_restart.email=TRUE
#wrapper.event.jvm_failed_invocation.email=TRUE
#wrapper.event.jvm_max_failed_invocations.email=TRUE
#wrapper.event.jvm_kill.email=TRUE
#wrapper.event.jvm_killed.email=TRUE
#wrapper.event.jvm_unexpected_exit.email=TRUE
#wrapper.event.wrapper_stop.email=TRUE

# Specify custom mail content
wrapper.event.jvm_restart.email.body=The JVM was restarted.\n\nPlease check on its status.\n

#********************************************************************
# Wrapper Windows Service Properties
#********************************************************************
# WARNING - Do not modify any of these properties when an application
# using this configuration file has been installed as a service.
# Please uninstall the service before modifying this section. The
# service can then be reinstalled.

# Name of the service
wrapper.name=proxyippool

# Display name of the service
wrapper.displayname=Test Wrapper proxyippool Application

# Description of the service
wrapper.description=Test Wrapper proxyippool Application Description

# Service dependencies. Add dependencies as needed starting from 1
wrapper.ntservice.dependency.1=

# Mode in which the service is installed. AUTO_START, DELAY_START or DEMAND_START
wrapper.ntservice.starttype=AUTO_START

# Allow the service to interact with the desktop (Windows NT/2000/XP only).
wrapper.ntservice.interactive=FALSE




前言
       java工程发布后，可以是jar、war文件，一般部署到Tomcat站点目录下，而控制台程序需要开启控制台窗口，我们希望开机启动并且不显示控制台，那么需要将jar文件服务注册到windows服务上，这样不管是开机启动、运行程序都不显示控制台页面，解决最多的方法是使用wrapper-windows软件包。
 
一、下载wrapper-windows文件，解压之后包括bin、conf、lib、src、logs、doc、bulid7个文件
 
     下载地址：https://www.krenger.ch/blog/java-service-wrapper-3-5-14-for-windows-x64/

 二、新建测试打包目录。例如：创建testService文件夹，在testService文件夹下创建bin、conf、lib、logs 4个文件夹。
 
    bin：需要将wrapper-windows解压文件bin目录下的InstallTestWrapper-NT.bat、StartTestWrapper-NT.bat、StopTestWrapper-NT.bat、UninstallTestWrapper-NT.bat、wrapper.exe这几个文件拷贝到bin目录下
    conf：wrapper-windows解压conf下的文件拷贝到对应conf文件夹下
    lib：wrapper-windows解压lib目录下wrapper.dll、wrapper.jar拷贝到lib目录下。同时，拷贝将启动程序所有jar文件。
 
三、修改testServic-->conf->wrapper.conf文件

    1>如果本机，jdk环境变量已配置好可以忽略。
    wrapper.java.command=java
    #  Specify a specific java binary:
    #set.JAVA_HOME=/java/path
    #wrapper.java.command=%JAVA_HOME%/bin/java
    
    wrapper.java.command=java：如果本机已配置了jre，那么此项不需更改；否则的话，需要将jre复制到myWindowServ文件夹路径下(如和bin在 同一级，修改wrapper.java.command=../jre/bin/java.exe)
    2>这里必须指定org.tanukisoftware.wrapper.WrapperSimpleApp
    
    wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
    
    3>将程序运行所有需要的jar包进行配置，lib文件中的wrapper.jar是必须的
    
    wrapper.java.classpath.1=../lib/tellyes.jar
    wrapper.java.classpath.2=../lib/wrapper.jar
    
    4>配置程序运行的所需要的内存大小
    # Initial Java Heap Size (in MB)
    #wrapper.java.initmemory=3
    # Maximum Java Heap Size (in MB)
    #wrapper.java.maxmemory=64
    修改成
    # Initial Java Heap Size (in MB)
    wrapper.java.initmemory=128
    # Maximum Java Heap Size (in MB)
    wrapper.java.maxmemory=256
    这里是限制服务所占用的最小和最大内存，根据程序运行的效果也可以不改。
    5>配置程序启动入口函数
    
    wrapper.app.parameter.1=自己入口文件函数(包名.函数名)
    
    6>配置服务器名称、描述
    
    wrapper.name=指定服务的名称
    # Display name of the service
    wrapper.displayname=服务的显示名称
    # Description of the service
    wrapper.description=服务描述
    
    7>启动模式，默认AUTO_START or DEMAND_START
    
四、测试
 
    运行“InstallTestWrapper-NT.bat”注册服务，如果没有其他异常的情况，在服务列表可以找到
    运行“StartTestWrapper-NT.bat"开启服务
    其他两个分别是“停止服务”、“删除服务”批处理文件
     
总结
 
     下载wrapper版本必须跟电脑系统一致。之前我下载32位版本，服务可以注册成功，但是启动不了，错误日志显示不支持32位。
此外，如果自己项目涉及到其他配置文件，必须放在bin目录下。例如，程序启动需要获取config.xml节点value，那么config.xml必须拷贝到打包文件bin目录下。
     不管是注册、启动服务，如果出现问题，可以根据logs目录下查看错误日志进行解决。

yasepix

java打包成windows服务

公告