Why?
I prefer using ethernet to Wifi to access internet. But, I'm afraid, sometimes I have to use Wifi. So, I'm going to configure my CentOS7 to be able to access internet through both Wifi and Ethernet.
Preparation
The ethernet interface/card name is not eth0 on my CentOS7, so I have to find it out.
Way 1:
- ls /etc/sysconfig/network-scripts/ifcfg-*
/etc/sysconfig/network-scripts/ifcfg-enp0s89 (<--- this is my Ethernet name)
/etc/sysconfig/network-scripts/ifcfg-lo (<--- I don't know what it is, whatever, never mind.)
/etc/sysconfig/network-scripts/ifcfg-Tenda_BJ (<--- this is my Wifi router name)
Way2:
- or, follow the GUI "Settings --> Network --> Wired",
Click the settings button on Wired panel, then swith to "Indentity --> Name".
the value of Name is enp0s89
so 'enp0s89' is what I am looking for. This Ethernet name will be used in pppoe configuration later.
Install and setup PPPoE
1. #yum install rp-pppoe
2. You don't have to remove NetworkManager as mentioned in [1]. In fact, if you remove NetworkManager, you can't use Wifi anymore.
3. #pppoe-setup
Enter your Login Name (default user0): <input your xDSL account name>
INTERFACE
(default eth0): <input your Ethernet card name, it may not be eth0!>
DNS
Enter the DNS information here: <>
Enter the secondary DNS server address here: <>
PASSWORD
Please enter your Password: <input your xDSL account password>
Please re-enter your Password: <input your xDSL account password again>
USERCTRL
Please enter 'yes' (three letters, lower-case.) if you want to allow normal user to start or stop DSL connection (default yes):
FIREWALLING
Choose a type of firewall (0-2): 1
4. connect your network: /sbin/ifup ppp0
5. disconnect your network: /sbin/ifdown ppp0
Reference
[1] 让CentOS进行PPPoE拨号上网，可用于ADSL网络环境！
