corosync+pacemaker实现高可用的MariaDB

corosync+pacemaker实现高可用的MariaDB

作者：元婴期 时间: 2021-02-05 09:29:56

标签：corosync+pacemaker实现linux cluster

【摘要】一、准备工作承接上文：corosync+pacemaker使用crmsh构建高可用集群二、MariaDB server配置（基于nfs）nfs server准备1、在nfs server准备LVM存储空间 [root@node3 ~]# fdisk /dev/sdb Device contains neither a valid DOS partition table, nor Sun, S...

一、准备工作

承接上文：corosync+pacemaker使用crmsh构建高可用集群

 

二、MariaDB server配置（基于nfs）

nfs server准备

1、在nfs server准备LVM存储空间
[root@node3 ~]# fdisk /dev/sdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x61284c6a.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
 
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
 
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u').
 
Command (m for help): n
Command action e   extended p   primary partition (1-4)
p
Partition number (1-4): 3
First cylinder (1-1305, default 1): 
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-1305, default 1305): +10G
Value out of range.
Last cylinder, +cylinders or +size{K,M,G} (1-1305, default 1305): +5G Command (m for help): t
Selected partition 3
Hex code (type L to list codes): 8e
Changed system type of partition 3 to 8e (Linux LVM)
 
Command (m for help): w
The partition table has been altered!
 
Calling ioctl() to re-read partition table.
Syncing disks.
 
[root@node3 ~]# partx -a /dev/sdb
 
[root@node3 ~]# pvcreate /dev/sdb3
  Physical volume "/dev/sdb3" successfully created
[root@node3 ~]# vgcreate myvg /dev/sdb3
  Volume group "myvg" successfully created
[root@node3 ~]# lvcreate -L 5G -n mydata myvg
  Logical volume "mydata" created.
[root@node3 ~]# mke2fs -t ext4 /dev/myvg/mydata
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
327680 inodes, 1310720 blocks
65536 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=1342177280
40 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736
 
Writing inode tables: done Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
 
This filesystem will be automatically checked every 36 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override. 2、开机自动挂载，并nfs导出
[root@node3 ~]# mkdir  /mydata
[root@node3 ~]# vim /etc/fstab 
/dev/myvg/mydata /mydata ext4 defaults 0 0
[root@node3 ~]# mount -a
[root@node3 ~]# mount | grep /mydata
/dev/mapper/myvg-mydata on /mydata type ext4 (rw)
 
[root@node3 ~]# vim /etc/exports 
/mydata 192.168.0.0/24(rw,no_root_squash)
#共享给192.168.0.0/24网段，可读可写，允许root用户登录便于初始化，配置结束可取消root用户登录 3、导出nfs共享目录
#创建mysql用户，指明uid，gid。各节点的mysql用户uid，gid一致。
[root@node3 ~]# groupadd -r -g 306 mysql
[root@node3 ~]# useradd -r -g 306 -u 306 mysql
 
#创建共享目录，并修改属主属组。
[root@node3 ~]# mkdir /mydata/data
[root@node3 ~]# chown -R mysql.mysql /mydata/data
 
#导出nfs共享目录
[root@node3 ~]# exportfs -arv
exporting 192.168.0.0/24:/mydata

[root@node3 ~]# service nfs start

 

三、各节点准备mysql

node1

创建mysql用户，uid和gid与nfs server的mysql用户保持一致
[root@node1 ~]# groupadd -r -g 306 mysql
[root@node1 ~]# useradd -r -g 306 -u 306 mysql

安装mariadb
[root@node1 ~]# tar xf mariadb-5.5.46-linux-x86_64.tar.gz -C /usr/local/
[root@node1 ~]# cd /usr/local
[root@node1 local]# ln -sv mariadb-5.5.46-linux-x86_64 mysql
`mysql' -> `mariadb-5.5.46-linux-x86_64'
[root@node1 local]# cd mysql/
[root@node1 mysql]# chown -R root.mysql ./*

挂载nfs文件系统
[root@node1 mysql]# mount -t nfs 192.168.0.20:/mydata /mydata
[root@node1 mysql]# mount | grep /mydata
192.168.0.20:/mydata on /mydata type nfs (rw,vers=4,addr=192.168.0.20,clientaddr=192.168.0.15)


初始化mysql至nfs，此步骤只需一个节点操作即可，本文node1执行，那么node2就不需要执行
初始化操作后，可以将nfs server的共享选项中的no_root_squash移除了
[root@node1 mysql]# ./scripts/mysql_install_db --datadir=/mydata/data/ --user=mysql

nfs server端查看
[root@node3 ~]# cd /mydata/data
[root@node3 data]# ll
total 32
-rw-rw---- 1 mysql mysql 16384 Nov 21 20:32 aria_log.00000001
-rw-rw---- 1 mysql mysql 52 Nov 21 20:32 aria_log_control
drwx------ 2 mysql root   4096 Nov 21 20:32 mysql
drwx------ 2 mysql mysql  4096 Nov 21 20:32 performance_schema
drwx------ 2 mysql root   4096 Nov 21 20:32 test

node1节点配置mysql
[root@node1 mysql]# mkdir /etc/mysql
[root@node1 mysql]# cp support-files/my-large.cnf /etc/mysql/my.cnf
[root@node1 mysql]# vim /etc/mysql/my.cnf
datadir = /mydata/data
innodb_file_per_table = on
skip_name_resolve = on

为mysql提供服务脚本，并禁止其开机启动
[root@node1 mysql]# cp support-files/mysql.server /etc/rc.d/init.d/mysqld
[root@node1 mysql]# chkconfig --add mysqld
[root@node1 mysql]# chkconfig mysqld off

启动mysql，创建mydb数据库
[root@node1 mysql]# service mysqld start
Starting MySQL..... SUCCESS!
[root@node1 mysql]# vim /root/.bashrc 
PATH=/usr/local/mysql/bin:$PATH
export PATH
[root@node1 mysql]# source /root/.bashrc
[root@node1 mysql]# mysql
Welcome to the MariaDB monitor.  Commands end with ; or \g.
Your MariaDB connection id is 2
Server version: 5.5.46-MariaDB-log MariaDB Server

Copyright (c) 2000, 2015, Oracle, MariaDB Corporation Ab and others.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

MariaDB [(none)]> create database mydb;
Query OK, 1 row affected (0.16 sec)

MariaDB [(none)]> flush privileges;
Query OK, 0 rows affected (0.03 sec)

MariaDB [(none)]> exit
Bye
[root@node1 mysql]# service mysqld stop
Shutting down MySQL.. SUCCESS! 

卸载共享目录
[root@node1 mysql]# umount /mydata

node2

[root@node2 ~]# groupadd -r -g 306 mysql
[root@node2 ~]# useradd -r -g 306 -u 306 mysql
[root@node2 ~]# tar xf mariadb-5.5.46-linux-x86_64.tar.gz -C /usr/local
[root@node2 ~]# cd /usr/local/
[root@node2 local]# ln -sv mariadb-5.5.46-linux-x86_64 mysql
`mysql' -> `mariadb-5.5.46-linux-x86_64'
[root@node2 local]# cd mysql/
[root@node2 mysql]# chown  root.mysql ./*

将node1的配置文件复制给node2
[root@node2 mysql]# mkdir /etc/mysql/
[root@node1 mysql]# scp /etc/mysql/my.cnf node2:/etc/mysql/

为node2节点准备服务脚本，并禁止开机启动
[root@node2 mysql]# cp support-files/mysql.server /etc/rc.d/init.d/mysqld
[root@node2 mysql]# chkconfig --add mysqld
[root@node2 mysql]# chkconfig mysqld off

挂在共享文件系统，启动mysql
[root@node2 mysql]# mkdir /mydata
[root@node2 mysql]# mount -t nfs 192.168.0.20:/mydata /mydata
[root@node2 mysql]# service mysqld start
Starting MySQL.. SUCCESS! 
[root@node2 mysql]# vim /root/.bashrc 
PATH=/usr/local/mysql/bin:$PATH
export PATH
[root@node2 mysql]# source /root/.bashrc
MariaDB [(none)]> show databases;
+--------------------+
| Database |
+--------------------+
| information_schema |
| mydb |
| mysql |
| performance_schema |
| test |
+--------------------+
5 rows in set (0.02 sec)

授权远程访问
MariaDB [(none)]> grant all on *.* to 'root'@'192.168.%.%' identified by 'jymlinux';
Query OK, 0 rows affected (0.03 sec)

MariaDB [(none)]> flush privileges;
Query OK, 0 rows affected (0.01 sec)

MariaDB [(none)]> exit
Bye

停止mysql，并卸载共享目录
[root@node2 mysql]# service mysqld stop
Shutting down MySQL.. SUCCESS! 
[root@node2 mysql]# umount /mydata

 

四、使用crmsh配置mariadb高可用

[root@node1 ~]# crm
crm(live)# cd configure
crm(live)configure# primitive myip ocf:heartbeat:IPaddr params ip=192.168.0.17 nic=eth0 cidr_netmask=24 op monitor interval=10s timeout=20s
crm(live)configure# verify
crm(live)configure# commit
crm(live)configure# primitive mystore ocf:heartbeat:Filesystem params device=192.168.0.20:/mydata/data directory=/mydata fstype=nfs 
crm(live)configure# verify
WARNING: mystore: default timeout 20s for start is smaller than the advised 60
WARNING: mystore: default timeout 20s for stop is smaller than the advised 60
crm(live)configure# commit
WARNING: mystore: default timeout 20s for start is smaller than the advised 60
WARNING: mystore: default timeout 20s for stop is smaller than the advised 60
crm(live)configure# primitive myserver ocf:heartbeat:mysql params binary="/usr/local/mysql/bin/mysqld_safe" config="/etc/mysql/my.cnf" datadir="/mydata/data"  op start timeout=120s op stop timeout=120s op monitor interval=20s timeout=30s
crm(live)configure# verify
crm(live)configure# commit

定义组资源
crm(live)configure# group myservice myip mystore myserver