SaltStack--项目实战
saltstack项目实战
项目架构规划
后端web服务器使用Nginx+Php作为站点，通过HAproxy做负载均衡，Keepalived做高可用
项目环境准备
说明： 关闭防火墙、selinux、时间同步等
host绑定
[root@salt-master ~]# cat /etc/hosts 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 192.168.1.30 salt-master 192.168.1.31 salt-minion01 192.168.1.32 salt-minion02 192.168.1.33 salt-minion03 192.168.1.34 salt-minion04 [root@salt-master ~]# for i in `seq 4`; do scp /etc/hosts 192.168.1.3$i:/etc/hosts ; done
软件安装
1）Master上软件安装
[root@salt-master ~]# yum -y install https://mirrors.aliyun.com/saltstack/yum/redhat/salt-repo-latest-2.el7.noarch.rpm [root@salt-master ~]# sed -i "s/repo.saltstack.com/mirrors.aliyun.com\/saltstack/g" /etc/yum.repos.d/salt-latest.repo [root@salt-master ~]# yum -y install salt-master [root@salt-master ~]# systemctl enable salt-master [root@salt-master ~]# systemctl start salt-master
2）Minion上软件安装并配置
# yum -y install https://mirrors.aliyun.com/saltstack/yum/redhat/salt-repo-latest-2.el7.noarch.rpm # yum -y install salt-minion # cp /etc/salt/minion{,.back} # sed -i '/#master: /c\master: salt-master' /etc/salt/minion # systemctl enable salt-minion # systemctl start salt-minion
Master上认证
[root@salt-master ~]# systemctl restart salt-master [root@salt-master ~]# salt-key -L Accepted Keys: Denied Keys: Unaccepted Keys: salt-minion01 salt-minion02 salt-minion03 salt-minion04 Rejected Keys: [root@salt-master ~]# salt-key -A -y The following keys are going to be accepted: Unaccepted Keys: salt-minion01 salt-minion02 salt-minion03 salt-minion04 Key for minion salt-minion01 accepted. Key for minion salt-minion02 accepted. Key for minion salt-minion03 accepted. Key for minion salt-minion04 accepted. [root@salt-master ~]# salt-key -L Accepted Keys: salt-minion01 salt-minion02 salt-minion03 salt-minion04 Denied Keys: Unaccepted Keys: Rejected Keys: [root@salt-master ~]# salt '*' test.ping salt-minion01: True salt-minion02: True salt-minion03: True salt-minion04: True
Master上state编写
state环境设置
说明：该案例在prod环境下配置，在prod下面创建了一个modules的目录，所有的安装配置都放在这个目录下面了，里面分别又对应创建了对应的软件目录，每个软件目录下面的files目录用来存放的是软件包或者配置文件模板
[root@salt-master ~]# vim /etc/salt/master file_roots: base: - /srv/salt/base test: - /srv/salt/test prod: - /srv/salt/prod dev: - /srv/salt/dev [root@salt-master ~]# systemctl restart salt-master [root@salt-master ~]# mkdir -p /srv/salt/{base,test,prod,dev} [root@salt-master ~]# mkdir -p /srv/salt/prod/modules/{nginx,php,mysql,haproxy,keepalived,lnmp}/files [root@salt-master ~]# mkdir /srv/salt/prod/modules/user [root@salt-master ~]# tree /srv/salt/prod/modules/ /srv/salt/prod/modules/ ├── haproxy │ └── files ├── keepalived │ └── files ├── lnmp │ └── files ├── mysql │ └── files ├── nginx │ └── files ├── php │ └── files └── user 13 directories, 0 files
sls文件编写
pkg基础包
安装源码编译所需要用到的基础软件包
[root@salt-master ~]# cat /srv/salt/prod/modules/pkg.sls pkg-install: pkg.installed: - pkgs: - gcc - gcc-c++ - make - autoconf - glibc - glibc-devel - glib2 - glib2-devel - pcre - pcre-devel - zlib - zlib-devel - openssl - openssl-devel - libpng - libpng-devel - freetype - freetype-devel - libxml2 - libxml2-devel - bzip2 - bzip2-devel - ncurses - curl - gdbm-devel - libXpm-devel - libX11-devel - gd-devel - gmp-devel - readline-devel - libxslt-devel - expat-devel - xmlrpc-c - xmlrpc-c-devel
useradd
创建网站运行用户
[root@salt-master ~]# cat /srv/salt/prod/modules/user/www.sls www-user-group: group.present: - name: www - gid: 2000 user.present: - name: www - fullname: www - shell: /sbin/nologin - uid: 2000 - gid: 2000 - unless: id www
nginx
1）软件包准备，及配置文件模板，启动文件模板
[root@salt-master ~]# cd /srv/salt/prod/modules/nginx/ [root@salt-master nginx]# tree . ├── files │ ├── nginx-1.12.2.tar.gz │ ├── nginx-1.16.0.tar.gz │ ├── nginx.conf.template │ └── nginx.service.template ├── install.sls └── service.sls 1 directory, 6 files
2）install.sls
[root@salt-master nginx]# cat install.sls {% set nginx_version = "1.16.0"%} include: - modules.pkg - modules.user.www nginx-install: file.managed: - name: /usr/local/src/nginx-{{ nginx_version }}.tar.gz - source: salt://modules/nginx/files/nginx-{{ nginx_version }}.tar.gz - user: root - group: root - mode: 644 cmd.run: - name: cd /usr/local/src/ && tar xf nginx-{{ nginx_version }}.tar.gz && cd nginx-{{ nginx_version }} && ./configure --prefix=/usr/local/nginx-{{ nginx_version }} --user=root --group=root --with-http_ssl_module --with-stream --with-http_stub_status_module --with-file-aio --with-http_gzip_static_module && make && make install && ln -s /usr/local/nginx-{{ nginx_version }} /usr/local/nginx - unless: test -d /usr/local/nginx-{{ nginx_version }} && test -L /usr/local/nginx - require: - file: nginx-install - pkg: pkg-install
3）service.sls
[root@salt-master nginx]# cat service.sls #引入nginx安装sls include: - modules.nginx.install #添加systemctl nginx-init: file.managed: - name: /usr/lib/systemd/system/nginx.service - source: salt://modules/nginx/files/nginx.service.template - user: root - group: root - mode: 755 - unless: test -f /usr/lib/systemd/system/nginx.service cmd.run: - name: systemctl daemon-reload - require: - file: nginx-init #配置文件 /usr/local/nginx/conf/nginx.conf: file.managed: - source: salt://modules/nginx/files/nginx.conf.template - user: root - group: root - mode: 644 #启动nginx nginx-service: file.directory: - name: /usr/local/nginx/conf/conf.d - user: root - group: root - mode: 755 - require: - cmd: nginx-install service.running: - name: nginx - enable: True - reload: True - require: - cmd: nginx-init - watch: - file: /usr/local/nginx/conf/nginx.conf - file: nginx-service
php
1）软件包准备，及配置文件模板，启动文件模板
[root@salt-master ~]# cd /srv/salt/prod/modules/php/ [root@salt-master php]# tree . ├── files │ ├── php-5.6.40.tar.gz │ ├── php-fpm.conf.template │ ├── php-fpm.service.template │ ├── php-fpm.template │ └── php.ini.template ├── install.sls └── service.sls 1 directory, 7 files
2）install.sls
[root@salt-master php]# cat install.sls {% set php_version = "5.6.40" %} include: - modules.pkg php-install: file.managed: - name: /usr/local/src/php-{{ php_version }}.tar.gz - source: salt://modules/php/files/php-{{ php_version }}.tar.gz - user: root - group: root - mode: 644 cmd.run: - name: cd /usr/local/src/ && tar xf php-{{ php_version }}.tar.gz && cd php-{{ php_version }} && ./configure --prefix=/usr/local/php-{{ php_version }} --with-curl --with-freetype-dir --with-gd --with-gettext --with-iconv-dir --with-jpeg-dir --with-kerberos --with-libdir=lib64 --with-libxml-dir --with-mysql --with-mysqli --with-openssl --with-pcre-regex --with-pdo-mysql --with-dpo-sqlite --with-pear --with-png-dir --with-openssl --with-xmlrpc --with-xsl --with-zlib --enable-fpm --enable-bcmath --enable-libxml --enable-inline-optimization --enable-gd-native-ttf --enable-mbregex --enable-mbstring --enable-opcache --enable-pcntl --enable-shmop --enable-soap --enable-sockets --enable-sysvsem --enable-xml --enable-zip && make && make install && ln -s /usr/local/php-{{ php_version }} /usr/local/php - unless: test -d /usr/local/php-{{ php_version }} && test -L /usr/local/php - require: - file: php-install - pkg: pkg-install
3）service.sls
[root@salt-master php]# cat service.sls #引入php安装的sls include: - modules.php.install #php-ini配置文件配置 php-ini: file.managed: - name: /usr/local/php/etc/php.ini - source: salt://modules/php/files/php.ini.template - user: root - group: root - mode: 644 - require: - cmd: php-install cmd.run: - name: ln -s /usr/local/php/etc/php.ini /etc/php.ini - unless: test -L /etc/php.ini - require: - file: php-ini #php-fpm配置文件配置 php-fpm: file.managed: - name: /usr/local/php/etc/php-fpm.conf - source: salt://modules/php/files/php-fpm.conf.template - user: root - group: root - mode: 644 - require: - cmd: php-install cmd.run: - name: ln -s /usr/local/php/etc/php-fpm.conf /etc/php-fpm.conf - unless: test -L /etc/php-fpm.conf - require: - file: php-fpm #加入system启动 php-systemd: file.managed: - name: /usr/lib/systemd/system/php-fpm.service - source: salt://modules/php/files/php-fpm.service.template - user: root - group: root - mode: 644 - require: - cmd: php-install #加入/etc/init.d/启动 php-init: file.managed: - name: /etc/init.d/php-fpm - source: salt://modules/php/files/php-fpm.template - user: root - group: root - mode: 755 - require: - cmd: php-install #启动php-fpm php-service: service.running: - name: php-fpm - enable: True - require: - file: php-systemd - watch: - file: php-fpm - file: php-ini
mysql
1）配置文件模板准备
[root@salt-master ~]# cd /srv/salt/prod/modules/mysql/ [root@salt-master mysql]# tree . ├── files │ └── my.cnf ├── install.sls └── service.sls 1 directory, 3 files
2）install.sls
[root@salt-master mysql]# cat install.sls mariadb-install: pkg.installed: - pkgs: - mariadb-server - mariadb
3）service.sls
[root@salt-master mysql]# cat service.sls #引入mysql安装的sls include: - modules.mysql.install #my.cnf配置文件 mariadb-config: file.managed: - name: /etc/my.cnf - source: salt://modules/mysql/files/my.cnf - user: root - group: root - mode: 644 - require: - pkg: mariadb-install #启动mariadb mariadb-service: service.running: - name: mariadb - enable: True - watch: - file: mariadb-config - require: - pkg: mariadb-install - file: mariadb-config
lnmp
1）准备测试文件php info 和nginx虚拟主机配置文件
[root@salt-master ~]# cd /srv/salt/prod/modules/lnmp/ [root@salt-master lnmp]# tree . ├── files │ ├── index.php │ └── www.conf └── www.sls 1 directory, 3 files
2）www.sls
[root@salt-master lnmp]# cat www.sls #引入nginx、php、mysql的安装 include: - modules.nginx.service - modules.php.service - modules.mysql.service #虚拟主机web站点目录创建 web-www: file.directory: - name: /opt/www - user: www - group: www - mode: 755 #虚拟主机配置文件配置 web-www-conf: file.managed: - name: /usr/local/nginx/conf/conf.d/www.conf - source: salt://modules/lnmp/files/www.conf - user: root - group: root - mode: 644 - require: - file: web-www - watch_in: - service: nginx-service - template: jinja - defaults: PORT: 80 IPADDR: {{ grains['fqdn_ip4'][0] }} #phpinfo测试文件准备 web-index: file.managed: - name: /opt/www/index.php - source: salt://modules/lnmp/files/index.php - user: www - group: www - mode: 644
测试lnmp是否OK
1）Top file编写
[root@salt-master ~]# cat /srv/salt/base/top.sls prod: "salt-minion0[3-4]": - modules.lnmp.www
2）执行高级状态
[root@salt-master ~]# salt '*' state.highstate
3）访问测试
haproxy
1）配置文件准备
[root@salt-master ~]# cd /srv/salt/prod/modules/haproxy/ [root@salt-master haproxy]# tree . ├── files │ └── haproxy.cfg ├── install.sls └── service.sls 1 directory, 3 files
2）install.sls
[root@salt-master haproxy]# cat install.sls haproxy-install: pkg.installed: - name: haproxy
3）service.sls
[root@salt-master haproxy]# cat service.sls #引入haproxy安装的sls include: - modules.haproxy.install #配置文件 haproxy-config: file.managed: - name: /etc/haproxy/haproxy.cfg - source: salt://modules/haproxy/files/haproxy.cfg - user: root - group: root - mode: 644 - require: - pkg: haproxy-install #启动haproxy haproxy-service: service.running: - name: haproxy - enable: True - require: - pkg: haproxy-install - file: haproxy-config - watch: - file: haproxy-config
keepalived
1）配置文件准备
[root@salt-master ~]# cd /srv/salt/prod/modules/keepalived/ [root@salt-master keepalived]# tree . ├── files │ └── keepalived.conf ├── install.sls └── service.sls 1 directory, 3 files
2）install.sls
[root@salt-master keepalived]# cat install.sls keepalived-install: pkg.installed: - name: keepalived
3）service.sls
[root@salt-master keepalived]# cat service.sls #引入keepalived安装的sls include: - modules.keepalived.install #keepalived配置文件 keepalived-config: file.managed: - name: /etc/keepalived/keepalived.conf - source: salt://modules/keepalived/files/keepalived.conf - user: root - group: root - mode: 644 - require: - pkg: keepalived-install - template: jinja - defaults: {% if grains['fqdn'] == "salt-minion01" %} ROUTER_ID: saltstack01 STATE: MASTER PRIORITY: 150 {% elif grains['fqdn'] == "salt-minion02" %} ROUTER_ID: saltstack02 STATE: BACKUP PRIORITY: 100 {% endif %} #启动keepalived keepalived-service: service.running: - name: keepalived - enable: True - require: - pkg: keepalived-install - file: keepalived-config - watch: - file: keepalived-config
整体部署
1）top file 编写
[root@salt-master ~]# cat /srv/salt/base/top.sls prod: "salt-minion0[3-4]": - modules.lnmp.www "salt-minion0[1-2]": - modules.haproxy.service - modules.keepalived.service
2）高级状态执行
[root@salt-master ~]# salt '*' state.highstate
3）测试
访问192.168.1.31和192.168.1.32的状态页
访问VIP192.168.1.100
通过上面测试可看到可以成功访问lnmp站点，并且haproxy也ok。访问所有四台服务器都可以得到phpinfo页面，而在生产环境中，我们只是对外提供vip即可。
项目总结
1）整体环境查看
[root@salt-master ~]# tree /srv/salt/prod/modules/ /srv/salt/prod/modules/ ├── haproxy │ ├── files │ │ └── haproxy.cfg │ ├── install.sls │ └── service.sls ├── keepalived │ ├── files │ │ └── keepalived.conf │ ├── install.sls │ └── service.sls ├── lnmp │ ├── files │ │ ├── index.php │ │ └── www.conf │ └── www.sls ├── mysql │ ├── files │ │ └── my.cnf │ ├── install.sls │ └── service.sls ├── nginx │ ├── files │ │ ├── nginx-1.12.2.tar.gz │ │ ├── nginx-1.16.0.tar.gz │ │ ├── nginx.conf.template │ │ └── nginx.service.template │ ├── install.sls │ └── service.sls ├── php │ ├── files │ │ ├── php-5.6.40.tar.gz │ │ ├── php-fpm.conf.template │ │ ├── php-fpm.service.template │ │ ├── php-fpm.template │ │ └── php.ini.template │ ├── install.sls │ └── service.sls ├── pkg.sls └── user └── www.sls 13 directories, 27 files
2）如果需要在某台服务器上面单独部署某一部分，参考以下写法：
[root@salt-master ~]# cat /srv/salt/base/top.sls #部署lnmp及haproxy+keepalived prod: "salt-minion0[3-4]": - modules.lnmp.www "salt-minion0[1-2]": - modules.haproxy.service - modules.keepalived.service #单实例操作说明： prod: "salt-minion04": - modules.nginx.service #单独安装nginx时 - modules.mysql.service #单独安装mysql时 - modules.php.service #单独安装php时 - modules.keepalived.service #单独安装keepalived时 - modules.haproxy.service #单独安装haproxy时 "salt-minion03": - modules.lnmp.www #单独部署lnmp环境时
如需配置文件模板及软件包联系我
人生是条无名的河，是浅是深都要过；
人生是杯无色的茶，是苦是甜都要喝；
人生是首无畏的歌，是高是低都要唱。
