Getting Started with phoneME Feature Software (MR4)

  Getting Started with phoneME Feature Software (MR4)

This guide contains the following sections:

  * Downloading phoneME Feature Software Source Code
  * Before You Begin
  * Setting Up Your Build Environment
  * Building the JavaCall Porting Layer
  * Building a PCSL Reference Port
  * Building a CLDC Reference Port
  * Building a phoneME Feature Software Reference Port 

Introduction

This guide contains information for building and running the phoneME™ Feature software, an optimized Java™ Platform, Micro Edition stack based on Milestone Release 4 (MR4) of the phoneME Feature software project.

This guide allows you to take the following general steps:

  * Set up and configure the build environment for your build platforms
  * Build a default version of the JavaCall™ porting layer, PCSL libraries, CLDC, and phoneME Feature software binaries.
  * Run the phoneME Feature software on your default platform.
  * Find additional information about phoneME Feature software.

Note: This document is part of the MR4 release of phoneME Feature software. The contents are subject to change at any time, based on community input and ongoing development.

Build Requirements

When building the phoneME Feature software, the machine where you setup your build environment and carry out the build instructions is called your build platform. The build platform is the machine where source code is installed, the compilers are run, and executable code is built. This executable code is then installed and run on a target platform.

The phoneME Feature software supports the following build platforms:

  * Windows x86

The phoneME Feature software supports the following target platforms:

  * Windows x86 (emulation mode only)

Note: The phoneME Feature software also supports building on Linux for the ARM target platform. For more information on building for this platform (the Texas Instruments P2SAMPLE64-V6 board), see the Sun Java Wireless Client Software Build Guide.

Requirements for Building on a Windows x86 Platform

A Windows x86 target platform must meet the following requirements:

  * Windows XP
  * JDK™ version 1.6.x
  * Microsoft Visual Studio 2005
  * Cyg4Me version 1.1 (a version of Cygwin for building Java ME technology. Cyg4Me contains GNU Make 3.79.1.) 

The following software is optional, depending on which optional packages you may want to build:

  * Microsoft DirectX Software Development Kit (needed for Multimedia)
  * Apple QuickTime Software Development Kit (needed for Multimedia)
  * Java Card™ Development Kit, version 2.2.1 (needed for Security and Trust Services)
  * Doxygen version 1.4.1 (used to build API documentation) 

For more information on acquiring and installing Windows x86 build platform tools, see Setting Up the Windows x86 Build Environment. For more information on building optional package software, see Sun Java Wireless Client Software Build Guide.
Commercial Documentation

This guide provides only the minimal information needed to set up, build, and run the phoneME Feature software quickly, using only default settings for each implementation.

For additional information on any topic presented in this document, see the Sun Java Wireless Client Software Build Guide.

NOTE: The Sun Java Wireless Client Software Build Guide makes use of build scripts provided with the book. To get access to the build scripts, and for additional information about other phoneME Feature software topics, including porting, multitasking, using Adaptive User Interface Technology, and more, see the commercial documentation set.