.net上传图片之使用第三方平台七牛上传图片接口

对于一些小平台，小网站，由于开发人员、技术有限，导致开发的一些诸如上传文件或者图片的功能，往往容易被攻击。这里我建议大家使用第三方存储上传内容:

七牛：http://www.qiniu.com/

之前给公司开发了一个账号中心的功能，里面包含了头像上传的功能，由于曾经公司服务器被攻击过（原因就是应用包含上传功能，暴露给不法分子利用），所以这次准备把头像存储到七牛。

应用场景：我把邮件、短信、上传头像（图片）这些功能抽象到了coreservice中（是使用servicestack开发的），供其他应用来调用。

这是coreservice代码，直接调七牛存储图片的接口：

 1 public enum FileType
 2     {
 3         AVATAR,
 4         CONFIG,
 5         PHOTO,
 6         KF,
 7     }
 8 
 9 [Route("/storage/file", "POST")]
10     public class FileUploadReq
11     {
12         public string FileName { get; set; }
13         public FileType fileType { get; set; }
14     }
15 
16     public class FileUploadRes
17     {
18         public bool bRet { get; set; }
19         public string Message { get; set; }
20         public string Key { get; set; }
21         public string HashCode { get; set; }
22     }
23 
24 public FileUploadRes Any(FileUploadReq request)
25         {
26             FileUploadRes res = new FileUploadRes();
27             res.bRet = true;
28             res.Message = "ok";
29 
30             Qiniu.Conf.Config.ACCESS_KEY = System.Configuration.ConfigurationManager.AppSettings["QiniuAccessKey"];
31             Qiniu.Conf.Config.SECRET_KEY = System.Configuration.ConfigurationManager.AppSettings["QiniuSecretKey"];
32 
33             Stream upStream = null;
34             foreach (var uploadedFile in base.Request.Files)
35             {
36                 upStream = uploadedFile.InputStream;
37                 //var newFilePath = Path.Combine(targetDir.FullName, uploadedFile.FileName);
38                 //uploadedFile.SaveTo(newFilePath);
39             }
40 
41 
42             string strButketName = "";
43             switch (request.fileType)
44             {
45                 case FileType.AVATAR:
46                     strButketName = "avatar6998";
47                     break;
48                 case FileType.CONFIG:
49                     strButketName = "config6998";
50                     break;
51                 case FileType.PHOTO:
52                     strButketName = "photo6998";
53                     break;
54                 case FileType.KF:
55                     strButketName = "kf6998";
56                     break;
57             }
58 
59 
60             IOClient target = new IOClient();
61             //string key = NewKey;
62             //PrintLn(key);
63             PutExtra extra = new PutExtra(); // TODO: 初始化为适当的值
64             //extra.MimeType = request.MimeType;
65             //extra.Crc32 = 123;
66             //extra.CheckCrc = CheckCrcType.CHECK;
67             //extra.Params = new System.Collections.Generic.Dictionary<string, string>();
68             PutPolicy put = new PutPolicy(strButketName + ":" + request.FileName);
69             //TmpFIle file = new TmpFIle(1024 * 10);
70             //target.PutFinished += new EventHandler<PutRet>((o, e) =>
71             //{
72             //    file.Del();
73             //    if (e.OK)
74             //    {
75             //        RSHelper.RSDel(Bucket, file.FileName);
76             //    }
77             //});
78 
79             PutRet ret = target.Put(put.Token(), request.FileName, upStream, extra);
80             res.bRet = ret.OK;
81             if (!ret.OK)
82             {
83                 res.Message = ret.Response;
84 
85                 log.ErrorFormat("qiniu upload error [{0}]", ret.Response);
86                 log.Error("qiniu exception", ret.Exception);
87             }
88             else
89             {
90                 res.Key = ret.key;
91                 res.HashCode = ret.Hash;
92             }
93             
94             return res;
95         }

这是应用调用：

 1 public JsonServiceClient getClient()
 2         {
 3             string strApiAddr = ConfigurationManager.AppSettings["StrApiAddr"];
 4             return new JsonServiceClient(strApiAddr);
 5         }
 6 
 7         public FileUploadDaoRes FileUpload(FileUploadDaoReq model)
 8         {
 9             FileUploadDaoRes ret = new FileUploadDaoRes();
10             try
11             {
12                 FileUploadReq req = new FileUploadReq();
13                 req.FileName = model.FileName;
14                 req.fileType = (FileType)model.fileType;
15                 var result = getClient().PostFileWithRequest<FileUploadRes>("storage/file", model.stream, "aaa.jpg", req);
16                 if (result.bRet)
17                 {
18                     ret.bRet = true;
19                     ret.Key = result.Key;
20                     ret.HashCode = result.HashCode;
21                 }
22                 else
23                 {
24                     ret.Message = result.Message;
25                 }
26             }
27             catch (Exception ex)
28             {
29                 log.ErrorFormat("FileUpload:{0}", ex.Message);
30                 ret.Message = ex.Message;
31             }
32             return ret;
33         }

主要是获取图片流，再把图片上传到服务器

posted @ 2015-01-23 13:35  xuxzx  阅读(641)  评论(0)  编辑  收藏  举报