存储过程分页
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[p_show]') and OBJECTPROPERTY(id, N'IsProcedure') =1)
drop procedure [dbo].[p_show]
GO
CREATE Proc p_show
@QueryStr nvarchar(4000), --表名、视图名、查询语句
@PageSize int=10, --每页的大小(行数)
@PageCurrent int=1, --要显示的页
@FdShow nvarchar (4000)='', --要显示的字段列表,如果查询结果有标识字段,需要指定此值,且不包含标识字段
@FdOrder nvarchar (1000)=''--排序字段列表
as
declare @FdName nvarchar(250) --表中的主键或表、临时表中的标识列名
,@Id1 varchar(20),@Id2 varchar(20) --开始和结束的记录号
,@Obj_ID int --对象ID
--表中有复合主键的处理
declare @strfd nvarchar(2000) --复合主键列表
,@strjoin nvarchar(4000) --连接字段
,@strwhere nvarchar(2000) --查询条件
select @Obj_ID=object_id(@QueryStr)
,@FdShow=case isnull(@FdShow,'') when '' then ' *'else''+@FdShow end
,@FdOrder=case isnull(@FdOrder,'') when '' then ''else' order by '+@FdOrder end
,@QueryStr=case when @Obj_ID is not null then ''+@QueryStr else' ('+@QueryStr+') a' end
--如果显示第一页，可以直接用top来完成
if @PageCurrent=1
begin
select @Id1=cast(@PageSize as varchar(20))
exec('select top '+@Id1+@FdShow+' from '+@QueryStr+@FdOrder)
return
end
--如果是表,则检查表中是否有标识更或主键
if @Obj_ID is not null and objectproperty(@Obj_ID,'IsTable')=1
begin
select @Id1=cast(@PageSize as varchar(20))
,@Id2=cast((@PageCurrent-1)*@PageSize as varchar(20))
select @FdName=name from syscolumns where id=@Obj_ID and status=0x80
if @@rowcount=0 --如果表中无标识列,则检查表中是否有主键
begin
if not exists(select 1 from sysobjects where parent_obj=@Obj_ID and xtype='PK')
goto lbusetemp --如果表中无主键,则用临时表处理
select @FdName=name from syscolumns where id=@Obj_ID and colid in(
select colid from sysindexkeys where @Obj_ID=id and indid in(
select indid from sysindexes where @Obj_ID=id and name in(
select name from sysobjects where xtype='PK' and parent_obj=@Obj_ID
)))
if @@rowcount>1 --检查表中的主键是否为复合主键
begin
select @strfd='',@strjoin='',@strwhere=''
select @strfd=@strfd+',['+name+']'
,@strjoin=@strjoin+' and a.['+name+']=b.['+name+']'
,@strwhere=@strwhere+' and b.['+name+'] is null'
from syscolumns where id=@Obj_ID and colid in(
select colid from sysindexkeys where @Obj_ID=id and indid in(
select indid from sysindexes where @Obj_ID=id and name in(
select name from sysobjects where xtype='PK' and parent_obj=@Obj_ID
)))
select @strfd=substring(@strfd,2,2000)
,@strjoin=substring(@strjoin,5,4000)
,@strwhere=substring(@strwhere,5,4000)
goto lbusepk
end
end
end
else
goto lbusetemp
/*--使用标识列或主键为单一字段的处理方法--*/
lbuseidentity:
exec('select top '+@Id1+@FdShow+' from '+@QueryStr
+' where '+@FdName+' not in(select top '
+@Id2+''+@FdName+' from '+@QueryStr+@FdOrder
+')'+@FdOrder
)
return
/*--表中有复合主键的处理方法--*/
lbusepk:
exec('select '+@FdShow+' from(select top '+@Id1+' a.* from
(select top 100 percent * from '+@QueryStr+@FdOrder+') a
left join (select top '+@Id2+''+@strfd+'
from '+@QueryStr+@FdOrder+') b on '+@strjoin+'
where'+@strwhere+') a'
)
return
/*--用临时表处理的方法--*/
lbusetemp:
select @FdName='[ID_'+cast(newid() as varchar(40))+']'
,@Id1=cast(@PageSize*(@PageCurrent-1) as varchar(20))
,@Id2=cast(@PageSize*@PageCurrent-1as varchar(20))
exec('select '+@FdName+'=identity(int,0,1),'+@FdShow+'
into #tb from'+@QueryStr+@FdOrder+'
select '+@FdShow+' from #tb where'+@FdName+' between '
+@Id1+' and '+@Id2
)
GO
------------------------------------
--用途：分页存储过程(对有主键的表效率极高)
--说明：
------------------------------------
CREATE PROCEDURE UP_GetRecordByPage
@tblName varchar(255), -- 表名
@fldName varchar(255), -- 主键字段名
@PageSize int=10, -- 页尺寸
@PageIndex int=1, -- 页码
@IsReCount bit =0, -- 返回记录总数, 非 0 值则返回
@OrderType bit =0, -- 设置排序类型, 非 0 值则降序
@strWhere varchar(1000) ='' -- 查询条件 (注意: 不要加 where)
AS
declare @strSQL varchar(6000) -- 主语句
declare @strTmp varchar(100) -- 临时变量
declare @strOrder varchar(400) -- 排序类型
if @OrderType !=0
begin
set @strTmp ='<(select min'
set @strOrder =' order by ['+ @fldName +'] desc'
end
else
begin
set @strTmp ='>(select max'
set @strOrder =' order by ['+ @fldName +'] asc'
end
set @strSQL ='select top '+ str(@PageSize) +' * from ['
+ @tblName +'] where ['+ @fldName +']'+ @strTmp +'(['
+ @fldName +']) from (select top '+ str((@PageIndex-1)*@PageSize) +' ['
+ @fldName +'] from ['+ @tblName +']'+ @strOrder +') as tblTmp)'
+ @strOrder
if @strWhere !=''
set @strSQL ='select top '+ str(@PageSize) +' * from ['
+ @tblName +'] where ['+ @fldName +']'+ @strTmp +'(['
+ @fldName +']) from (select top '+ str((@PageIndex-1)*@PageSize) +' ['
+ @fldName +'] from ['+ @tblName +'] where '+ @strWhere +''
+ @strOrder +') as tblTmp) and '+ @strWhere +''+ @strOrder
if @PageIndex =1
begin
set @strTmp =''
if @strWhere !=''
set @strTmp =' where '+ @strWhere
set @strSQL ='select top '+ str(@PageSize) +' * from ['
+ @tblName +']'+ @strTmp +''+ @strOrder
end
if @IsReCount !=0
set @strSQL ='select count(*) as Total from ['+ @tblName +']'+' where '+ @strWhere
exec (@strSQL)
GO
存储过程：
create proc Test
@PageIndex INT,--@PageIndex从计数,0为第一页
@PageSize INT, --页面大小
@RecordCount INT OUT, --总记录数
@PageCount INT OUT--页数
as
SELECT @RecordCount = COUNT(*) FROM A --获取记录数 SET @PageCount = CEILING(@RecordCount * 1.0 / @PageSize) --计算页面数据
SELECT SerialNumber,Id,Names,Age FROM (SELECT Id,Names,Age,ROW_NUMBER() OVER (ORDER BY Id ) AS SerialNumber FROM A ) AS T
WHERE T.SerialNumber > (@PageIndex * @PageSize) and T.SerialNumber <= ((@PageIndex+1) * @PageSize)
go
存储过程测试：
DECLARE @RecordCount int ,@PageCount int exec Test 0,10, @RecordCount OUTPUT, @PageCount OUTPUT select @RecordCount,@PageCount go
存储过程的调用：
-----已更新---
DBHelper类中的方法：
/// <summary>
/// sql带返回参数的存储过程(分页)
/// </summary>
/// <param name="procName">存储过程名字</param>
/// <param name="outParameterName">输出参数的名字</param>
/// <param name="dic">输出参数得到的值</param>
/// <param name="pars">参数列表</param>
/// <returns>DataTable</returns>
public static DataTable GetFillData(string procName,string [] outParameterName, out Dictionary<string,object> dic,params SqlParameter[] pars)
{
Dictionary<string, object> dictionary = new Dictionary<string, object>();
DataSet ds = new DataSet();
using (cmd = new SqlCommand(procName, Connectionstrings))
{
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.AddRange(pars);
foreach (var item in outParameterName)
{
cmd.Parameters[item].Direction = ParameterDirection.Output;
}
using (adapter = new SqlDataAdapter(cmd))
{
adapter.Fill(ds);
dic = dictionary;
foreach (var item in outParameterName)
{
dictionary.Add(item, cmd.Parameters[item].Value.ToString());
}
return ds.Tables[0];
}
}
}
DBHelper类可能大家的都不同，可以根据自己的DBHelper类修改此方法。 在这里我也把自己用的DBHelper写出来（注重版权，本人只是交流需要，无其他商业目的）
