案例6 配置FTP

image

1.配置交换机SW1作为客户端

[SW1]interface Vlanif 1
[SW1-Vlanif1]ip address 192.168.0.2 30

2.配置路由器R1作为服务端

[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip address 192.168.0.1 30
[R1-GigabitEthernet0/0/0]quit
[R1]
[R1]ftp server enable
Info: Succeeded in starting the FTP server
[R1]aaa
[R1-aaa]local-user ender password cipher qytang001
Info: Add a new user.
[R1-aaa]local-user ender service-type ftp
[R1-aaa]local-user ender privilege level 15
[R1-aaa]local-user ender ftp-directory flash:
[R1-aaa]q
[R1]
<R1>save

3.FTP连接测试

<SW1>ftp 192.168.0.1
Trying 192.168.0.1 ...
Press CTRL+K to abort
Connected to 192.168.0.1.
220 FTP service ready.
User(192.168.0.1:(none)):ender
331 Password required for ender.
Enter password:
230 User logged in.

[ftp]dir
200 Port command okay.
150 Opening ASCII mode data connection for *.
drwxrwxrwx   1 noone    nogroup         0 Oct 18 12:31 dhcp
-rwxrwxrwx   1 noone    nogroup    121802 May 26  2014 portalpage.zip
-rwxrwxrwx   1 noone    nogroup      2263 Oct 18 12:31 statemach.efs
-rwxrwxrwx   1 noone    nogroup    828482 May 26  2014 sslvpn.zip
-rwxrwxrwx   1 noone    nogroup       249 Oct 18 12:36 private-data.txt
drwxrwxrwx   1 noone    nogroup         0 Oct 18 12:36 .
-rwxrwxrwx   1 noone    nogroup       640 Oct 18 12:36 vrpcfg.zip
226 Transfer complete.

[ftp]get portalpage.zip
200 Port command okay.
150 Opening ASCII mode data connection for portalpage.zip.

  1%     

  2%     

  6%
posted @ 2023-10-18 20:43  xl4ng  阅读(11)  评论(0)  编辑  收藏  举报