SVN-Windows配置
svnadmin create 目录
svnserve -d -r 目录
发布SVN项目目录（或SVN仓库目录）：C:\Users\xiongjiawei>svnadmin create D:\桌面\svn-pro
注：svn-pro可以事先不创建，即不存在，命令执行后会自动创建，或者是一个已存在的空目录，但不能是一个已存在的非空目录。
配置访问权限：D:\桌面\svn-pro\conf\svnserve.conf，同Linux环境配置方法
anon-access = read 允许匿名读
password-db = passwd 启用账号密码
authz-db = authz 设置用户访问权限范围
realm = My First Repository
### This file controls the configuration of the svnserve daemon, if you ### use it to allow access to this repository. (If you only allow ### access through http: and/or file: URLs, then this file is ### irrelevant.) ### Visit http://subversion.apache.org/ for more information. [general] ### The anon-access and auth-access options control access to the ### repository for unauthenticated (a.k.a. anonymous) users and ### authenticated users, respectively. ### Valid values are "write", "read", and "none". ### Setting the value to "none" prohibits both reading and writing; ### "read" allows read-only access, and "write" allows complete ### read/write access to the repository. ### The sample settings below are the defaults and specify that anonymous ### users have read-only access to the repository, while authenticated ### users have read and write access to the repository. anon-access = read auth-access = write ### The password-db option controls the location of the password ### database file. Unless you specify a path starting with a /, ### the file's location is relative to the directory containing ### this configuration file. ### If SASL is enabled (see below), this file will NOT be used. ### Uncomment the line below to use the default password file. password-db = passwd ### The authz-db option controls the location of the authorization ### rules for path-based access control. Unless you specify a path ### starting with a /, the file's location is relative to the ### directory containing this file. The specified path may be a ### repository relative URL (^/) or an absolute file:// URL to a text ### file in a Subversion repository. If you don't specify an authz-db, ### no path-based access control is done. ### Uncomment the line below to use the default authorization file. authz-db = authz ### The groups-db option controls the location of the file with the ### group definitions and allows maintaining groups separately from the ### authorization rules. The groups-db file is of the same format as the ### authz-db file and should contain a single [groups] section with the ### group definitions. If the option is enabled, the authz-db file cannot ### contain a [groups] section. Unless you specify a path starting with ### a /, the file's location is relative to the directory containing this ### file. The specified path may be a repository relative URL (^/) or an ### absolute file:// URL to a text file in a Subversion repository. ### This option is not being used by default. # groups-db = groups ### This option specifies the authentication realm of the repository. ### If two repositories have the same authentication realm, they should ### have the same password database, and vice versa. The default realm ### is repository's uuid. # realm = My First Repository ### The force-username-case option causes svnserve to case-normalize ### usernames before comparing them against the authorization rules in the ### authz-db file configured above. Valid values are "upper" (to upper- ### case the usernames), "lower" (to lowercase the usernames), and ### "none" (to compare usernames as-is without case conversion, which ### is the default behavior). # force-username-case = none ### The hooks-env options specifies a path to the hook script environment ### configuration file. This option overrides the per-repository default ### and can be used to configure the hook script environment for multiple ### repositories in a single file, if an absolute path is specified. ### Unless you specify an absolute path, the file's location is relative ### to the directory containing this file. # hooks-env = hooks-env [sasl] ### This option specifies whether you want to use the Cyrus SASL ### library for authentication. Default is false. ### This section will be ignored if svnserve is not built with Cyrus ### SASL support; to check, run 'svnserve --version' and look for a line ### reading 'Cyrus SASL authentication is available.' # use-sasl = true ### These options specify the desired strength of the security layer ### that you want SASL to provide. 0 means no encryption, 1 means ### integrity-checking only, values larger than 1 are correlated ### to the effective key length for encryption (e.g. 128 means 128-bit ### encryption). The values below are the defaults. # min-encryption = 0 # max-encryption = 256
添加用户名、密码：D:\桌面\svn-pro\conf\passwd
### This file is an example password file for svnserve. ### Its format is similar to that of svnserve.conf. As shown in the ### example below it contains one section labelled [users]. ### The name and password for each user follow, one account per line. [users] # harry = harryssecret # sally = sallyssecret xiongjiawei = 9527
设置用户访问权限范围：D:\桌面\svn-pro\conf\authz
### This file is an example authorization file for svnserve. ### Its format is identical to that of mod_authz_svn authorization ### files. ### As shown below each section defines authorizations for the path and ### (optional) repository specified by the section name. ### The authorizations follow. An authorization line can refer to: ### - a single user, ### - a group of users defined in a special [groups] section, ### - an alias defined in a special [aliases] section, ### - all authenticated users, using the '$authenticated' token, ### - only anonymous users, using the '$anonymous' token, ### - anyone, using the '*' wildcard. ### ### A match can be inverted by prefixing the rule with '~'. Rules can ### grant read ('r') access, read-write ('rw') access, or no access ### (''). [aliases] # joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average [groups] # harry_and_sally = harry,sally # harry_sally_and_joe = harry,sally,&joe [/] xiongjiawei = rw # [/foo/bar] # harry = rw # &joe = r * = # [repository:/baz/fuz] # @harry_and_sally = rw * = r
进入svn-pro所有目录，启动服务：svnserve -d -r svn-pro
C:\Users\xiongjiawei>D: D:\>cd D:\桌面\ D:\桌面>dir 驱动器 D 中的卷是 LENOVO 卷的序列号是 18E8-1C46 D:\桌面 的目录 2020-02-29 11:31 <DIR> . 2020-02-29 11:31 <DIR> .. 2020-02-29 11:34 <DIR> svn-pro 2020-02-28 22:56 <DIR> svnclient 2020-02-29 01:11 <DIR> www 0 个文件 0 字节 5 个目录 32,256,466,944 可用字节 D:\桌面>svnserve -d -r svn-pro
。
配置Eclipse客户端，安装SVN插件：
方法一（离线）：打开Eclipse，Help-Install New Software...-Add... 此法已老旧。
方法二（在线）：打开Eclipse官网，搜索SVN，托动安装按钮到Eclipse窗口，会自动检测安装。
方法三（在线）：打开Eclipse，Help-Eclipse Marketplace...，Find搜svn或subversion然后Go，然后Install
安装完成后重启eclipse
Eclipse上发布项目：svn://IP或主机名
在项目上右击，Team - Share Project... - SVN - Next -
注：若Eclipse上svn用户名密码保存错误，可清空此目录：C:\Users\xiongjiawei\AppData\Roaming\Subversion\auth，下次在Eclipse使用svn时会再弹出提示输入用户名密码
……
