nullnullＣ＋＋ ＬＡＮＧＵＡＧＥ ＴＵＴＯＲＩＡＬ ： ＡＲＲＡＹＳ

最近使用开发的过程中出现了一个小问题，顺便记录一下原因和方法--nullnull

    

Arrays

    An array is a series of elements of the same type placed in contiguous memory locations that can be individually referenced by adding an index to a unique identifier.

    That means that, for example, we can store 5 values of type

    

    int

    

    in an array without having to declare 5 different variables, each one with a different identifier. Instead of that, using an array we can store 5 different values of the same type,

    

    int

    

    for example, with a unique identifier.

    For example, an array to contain 5 integer values of type

    

    int

    

    called

    

    billy

    

    could be represented like this:

    null和null

    where each blank panel represents an element of the array, that in this case are integer values of type

    

    int

    

    . These elements are numbered from

    

    0

    

    to

    

    4

    

    since in arrays the first index is always

    

    0

    

    , independently of its length.

    Like a regular variable, an array must be declared before it is used. A typical declaration for an array in C++ is:

    

    type name [elements];

    

    where

    

    type

    

    is a valid type (like

    

    int

    

    ,

    

    float

    

    ...),

    

    name

    

    is a valid identifier and the

    

    elements

    

    field (which is always enclosed in square brackets

    

    []

    

    ), specifies how many of these elements the array has to contain.

    Therefore, in order to declare an array called

    

    billy

    

    as the one shown in the above diagram it is as simple as:

 
 
int billy [5];

    NOTE

    

    : The

    

    elements

    

    field within brackets

    

    []

    

    which represents the number of elements the array is going to hold, must be a

    

    constant

    

    value, since arrays are blocks of non-dynamic memory whose size must be determined before execution. In order to create arrays with a variable length dynamic memory is needed, which is explained later in these tutorials.

    

    

Initializing arrays.

    When declaring a regular array of local scope (within a function, for example), if we do not specify otherwise, its elements will not be initialized to any value by default, so their content will be undetermined until we store some value in them. The elements of global and static arrays, on the other hand, are automatically initialized with their default values, which for all fundamental types this means they are filled with zeros.

    In both cases, local and global, when we declare an array, we have the possibility to assign initial values to each one of its elements by enclosing the values in braces

    

    { }

    

    . For example:

 
 
int billy [5] = { 16, 2, 77, 40, 12071 };

This declaration would have created an array like this:

    null和null

    The amount of values between braces

    

    { }

    

    must not be larger than the number of elements that we declare for the array between square brackets

    

    [ ]

    

    . For example, in the example of array

    

    billy

    

    we have declared that it has 5 elements and in the list of initial values within braces

    

    { }

    

    we have specified 5 values, one for each element.

    When an initialization of values is provided for an array, C++ allows the possibility of leaving the square brackets empty

    

    [ ]

    

    . In this case, the compiler will assume a size for the array that matches the number of values included between braces

    

    { }

    

    :

 
 
int billy [] = { 16, 2, 77, 40, 12071 };

After this declaration, array

    

    billy

    

    would be 5 ints long, since we have provided 5 initialization values.

    

    

Accessing the values of an array.

    In any point of a program in which an array is visible, we can access the value of any of its elements individually as if it was a normal variable, thus being able to both read and modify its value. The format is as simple as:

    

    name[index]

    

    Following the previous examples in which

    

    billy

    

    had 5 elements and each of those elements was of type

    

    int

    

    , the name which we can use to refer to each element is the following:

    null和null

    For example, to store the value

    

    75

    

    in the third element of

    

    billy

    

    , we could write the following statement:

 
 
billy[2] = 75;

and, for example, to pass the value of the third element of

    

    billy

    

    to a variable called

    

    a

    

    , we could write:

 
 
a = billy[2];

Therefore, the expression

    

    billy[2]

    

    is for all purposes like a variable of type

    

    int

    

    .

    Notice that the third element of

    

    billy

    

    is specified

    

    billy[2]

    

    , since the first one is

    

    billy[0]

    

    , the second one is

    

    billy[1]

    

    , and therefore, the third one is

    

    billy[2]

    

    . By this same reason, its last element is

    

    billy[4]

    

    . Therefore, if we write billy[5], we would be accessing the sixth element of

    

    billy

    

    and therefore exceeding the size of the array.

    In C++ it is syntactically correct to exceed the valid range of indices for an array. This can create problems, since accessing out-of-range elements do not cause compilation errors but can cause runtime errors. The reason why this is allowed will be seen further ahead when we begin to use pointers.

    At this point it is important to be able to clearly distinguish between the two uses that brackets

    

    [ ]

    

    have related to arrays. They perform two different tasks: one is to specify the size of arrays when they are declared; and the second one is to specify indices for concrete array elements. Do not confuse these two possible uses of brackets

    

    [ ]

    

    with arrays.

1
2

int billy[5];         // declaration of a new array
billy[2] = 75;        // access to an element of the array.

If you read carefully, you will see that a type specifier always precedes a variable or array declaration, while it never precedes an access.

    Some other valid operations with arrays:

1
2
3
4

billy[0] = a;
billy[a] = 75;
b = billy [a+2];
billy[billy[a]] = billy[2] + 5;
 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

// arrays example
#include <iostream>
using namespace std;

int billy [] = {16, 2, 77, 40, 12071};
int n, result=0;

int main ()
{
  for ( n=0 ; n<5 ; n++ )
  {
    result += billy[n];
  }
  cout << result;
  return 0;
}
 
12206

    

Multidimensional arrays

    每日一道理
微笑，是春天里的一丝新绿，是秋日里的一缕阳光，是骄阳下的一片浓荫，是冬雪中的一株梅红……微笑着去面对吧，你会感到人生是那样的温馨与甜蜜！

    Multidimensional arrays can be described as "arrays of arrays". For example, a bidimensional array can be imagined as a bidimensional table made of elements, all of them of a same uniform data type.

    null和null

    

    jimmy

    

    represents a bidimensional array of 3 per 5 elements of type

    

    int

    

    . The way to declare this array in C++ would be:

 
 
int jimmy [3][5];

and, for example, the way to reference the second element vertically and fourth horizontally in an expression would be:

 
 
jimmy[1][3]

null和null

    (remember that array indices always begin by zero).

    Multidimensional arrays are not limited to two indices (i.e., two dimensions). They can contain as many indices as needed. But be careful! The amount of memory needed for an array rapidly increases with each dimension. For example:

 
 
char century [100][365][24][60][60];

declares an array with a

    

    char

    

    element for each second in a century, that is more than 3 billion chars. So this declaration would consume more than 3 gigabytes of memory!

    Multidimensional arrays are just an abstraction for programmers, since we can obtain the same results with a simple array just by putting a factor between its indices:

1
2

int jimmy [3][5];   // is equivalent to
int jimmy [15];     // (3 * 5 = 15)

With the only difference that with multidimensional arrays the compiler remembers the depth of each imaginary dimension for us. Take as example these two pieces of code, with both exactly the same result. One uses a bidimensional array and the other one uses a simple array:

multidimensional arraypseudo-multidimensional array
#define WIDTH 5
#define HEIGHT 3

int jimmy [HEIGHT][WIDTH];
int n,m;

int main ()
{
  for (n=0;n<HEIGHT;n++)
    for (m=0;m<WIDTH;m++)
    {
      jimmy[n][m]=(n+1)*(m+1);
    }
  return 0;
}

#define WIDTH 5
#define HEIGHT 3

int jimmy [HEIGHT * WIDTH];
int n,m;

int main ()
{
  for (n=0;n<HEIGHT;n++)
    for (m=0;m<WIDTH;m++)
    {
      jimmy[n*WIDTH+m]=(n+1)*(m+1);
    }
  return 0;
}

None of the two source codes above produce any output on the screen, but both assign values to the memory block called jimmy in the following way:

    null和null

    We have used "defined constants" (

    

    #define

    

    ) to simplify possible future modifications of the program. For example, in case that we decided to enlarge the array to a height of 4 instead of 3 it could be done simply by changing the line:

 
 
#define HEIGHT 3

to:

 
 
#define HEIGHT 4

with no need to make any other modifications to the program.

    

Arrays as parameters

    At some moment we may need to pass an array to a function as a parameter. In C++ it is not possible to pass a complete block of memory by value as a parameter to a function, but we are allowed to pass its address. In practice this has almost the same effect and it is a much faster and more efficient operation.

    In order to accept arrays as parameters the only thing that we have to do when declaring the function is to specify in its parameters the element type of the array, an identifier and a pair of void brackets

    

    []

    

    . For example, the following function:

 
 
void procedure (int arg[])

accepts a parameter of type "array of

    

    int

    

    " called

    

    arg

    

    . In order to pass to this function an array declared as:

 
 
int myarray [40];

it would be enough to write a call like this:

 
 
procedure (myarray);

Here you have a complete example:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18

// arrays as parameters
#include <iostream>
using namespace std;

void printarray (int arg[], int length) {
  for (int n=0; n<length; n++)
    cout << arg[n] << " ";
  cout << "\n";
}

int main ()
{
  int firstarray[] = {5, 10, 15};
  int secondarray[] = {2, 4, 6, 8, 10};
  printarray (firstarray,3);
  printarray (secondarray,5);
  return 0;
}
 
5 10 15
2 4 6 8 10

As you can see, the first parameter (

    

    int arg[]

    

    ) accepts any array whose elements are of type

    

    int

    

    , whatever its length. For that reason we have included a second parameter that tells the function the length of each array that we pass to it as its first parameter. This allows the

    

    for

    

    loop that prints out the array to know the range to iterate in the passed array without going out of range.

    In a function declaration it is also possible to include multidimensional arrays. The format for a tridimensional array parameter is:

 
 
base_type[][depth][depth]

for example, a function with a multidimensional array as argument could be:

 
 
void procedure (int myarray[][3][4])

Notice that the first brackets

    

    []

    

    are left empty while the following ones specify sizes for their respective dimensions. This is necessary in order for the compiler to be able to determine the depth of each additional dimension.

    Arrays, both simple or multidimensional, passed as function parameters are a quite common source of errors for novice programmers. I recommend the reading of the chapter about Pointers for a better understanding on how arrays operate.

文章结束给大家分享下程序员的一些笑话语录： IBM和波音777
　　波音777是有史以来第一架完全在电脑虚拟现实中设计制造的飞机，所用的设备完全由IBM公司所提供。试飞前，波音公司的总裁非常热情的邀请IBM的技术主管去参加试飞，可那位主管却说道:“啊，非常荣幸，可惜那天是我妻子的生日，So..”..
　　波音公司的总载一听就生气了:“胆小鬼，我还没告诉你试飞的日期呢!”

posted @ 2013-05-13 22:28  xinyuyuanm  阅读(227)  评论(0)  编辑  收藏  举报