Verilog 基础回顾 (一)

  Verilog 大小写敏感，且所有关键字都是小写

1  寄存器

　register = storage，是数据存储单元的抽象，可视为能够存储数值的变量 (variable that can hold value)

    关键字 reg;　　缺省值 x;　　

2  网络连接

    net = connection, 表示寄存器之间的连接，只能采用连续赋值 (must be driven continuously)

    关键字 wire;　　缺省值 z;　　

2.1  D 触发器 (同步复位)

module  dff(clk, rst, d, q);  //dff with syn reset
  input  clk,  rst,  d;
  output  q;
  reg  q;

always @(posedge clk)
begin
  if (rst)
      q <= 1'b0;
   else 
      q <= d;
end

endmodule

2.2  D 触发器 (异步复位)

module  dff(clk, rst, d, q); // dff with asyn reset
  input  clk,  rst,  d;
  output  q;
  reg  q;

always @(posedge clk or posedge rst)
begin
  if (rst)
      q <= 1'b0;
  else 
      q <= d;
end

endmodule 

   

3  连续赋值 continuous assignment  

assign  data_left  =  data_right;  // right drive left(net)

例：选择器 mux

assign  data_out  =  select ? data_in1 : data_in0;

4  procedural assignment

1)  阻塞赋值 ("=")

     execute sequential

2)  非阻塞赋值 ("<=")

     read (right)  -> schedule (left) ->  execute (<=)

例： synchronizer

reg  [1:0]  data_sync;

always @ (posedge clk or posedge rst)
begin
  if (rst)
        data_sync  <=  2'b00;
  else
        data_sync  <= {data_sync[0], data_in};
end

assign  data_out  =  data_sync[1];