00-04.kaliLinux-手动配置IP地址

在KaliLinux中手动配置网卡

用vim打开网卡的配置文件，配置各个网卡信息

root@kali:~# cd /etc/network
root@kali:/etc/network# 
--------------------------------------------------------------------
root@kali:/etc/network# ls
if-down.d  if-post-down.d  if-pre-up.d  if-up.d  interfaces  interfaces.d
root@kali:/etc/network# 
--------------------------------------------------------------------
root@kali:/etc/network# vim interfaces
--------------------------------------------------------------------
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

#添加以下信息
auto eth0 
iface eth0 inet static
address 192.168.4.36
netmask 255.255.255.0
gateway 192.168.4.1

auto eth1 
iface eth1 inet static
address 192.168.23.200
netmask 255.255.255.0
~
-----------------------------------------------------------------------
:wq

 

配置DNS相关信息

root@kali:/etc/network# vim /etc/resolv.conf
-------------------------------------------------------------------
~
nameserver 114.114.114.114 
nameserver 192.168.4.1 
~
-------------------------------------------------------------------
:wq

 

最后一定要重启网卡服务

root@kali:/etc/network# service networking restart
root@kali:/etc/network#