ensp静态路由配置实验

一、绘制网络拓扑图：

二、配置

pc配置

IP地址、掩码、网关一定要填好，填好后点击应用。

路由器配置：

R1

<Huawei>undo t t
Info: Current terminal trapping is off.
<Huawei>sys //进入配置视图
Enter system view, return user view with Ctrl+Z.
[Huawei]sys R1  //为设备命名
[R1]int g0/0/1 //进入端口
[R1-GigabitEthernet0/0/1]ip address 192.1.1.254 24 //为端口配置IP地址和掩码
[R1-GigabitEthernet0/0/1]int g0/0/2
[R1-GigabitEthernet0/0/2]ip add 192.1.3.1 30 
[R1-GigabitEthernet0/0/2]q
[R1]ip router-s	
[R1]ip route-static 192.1.2.0 24 192.1.3.2 //配置静态路由

　R2

<Huawei>undo t t
Info: Current terminal trapping is off.
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys R2
[R2]int g0/0/1
[R2-GigabitEthernet0/0/1]ip add 192.1.2.254 24
[R2-GigabitEthernet0/0/1]int g0/0/2
[R2-GigabitEthernet0/0/2]ip add 192.1.3.2 30
[R2-GigabitEthernet0/0/2]q
[R2]ip route-static 192.1.1.0 24 192.1.3.1

　　关键代码：ip route-static 目的IP 目的IP的掩码 下一跳IP

三、测试连通性

打开pc的命令行-去ping别的pc机能通则代表实验成功