如何将Win7做为NTP服务器

1. 修改注册表项

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpServer     

        Enabled 设定为 1（默认0）

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\

        AnnounceFlags 设定为 5 （默认 10）

Value	Meaning
0	Timeserv_Announce_No, Reliable_Timeserv_Announce_No. The domain controller does not advertise time service.
1	Timeserv_Announce_Yes. The domain controller always advertises time service.
2	Timeserv_Announce_Auto. The domain controller automatically determines whether it should advertise time service.
4	Reliable_Timeserv_Announce_Yes. The domain contoller will always advertise reliable time service.
8	Reliable_Timeserv_Announce_Auto. The domain controller automatically determines whether it should advertise reliable time service.

2. 禁用防火墙或设置例外，UDP 123端口。

3. 运行 services.msc，将Windows Time服务设置成自动（延迟启动）

     Win7下如果设置成自动，下次重启后此服务会被停止，原因不详。

     经实验，延迟启动也并不需要用户登录即可启动。

4. 重启动校时服务：net stop w32time && net start w32time 

 

网络设备（如cisco、h3c交换机……）不能正常同步NTP服务器时间：

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\LocalClockDispersion

值修改为0 （默认为0x0000000a）

 

转自：http://blog.sina.com.cn/s/blog_671c54fe0102v4wy.html