CentOS7安装部署ClickHouse（单机版&&集群部署）
1.1 什么是ClickHouse
ClickHouse 是俄罗斯的Yandex于2016年开源的列式存储数据库（DBMS），主要用于在线分析处理查询（OLAP），能够使用SQL查询实时生成分析数据报告。
1.2 什么是列式存储
以下面的表为例：
| Id | Name | Age |
|---|---|---|
| 1 | 张三 | 18 |
| 2 | 李四 | 22 |
| 3 | 王五 | 34 |
采用行式存储时，数据在磁盘上的组织结构为：
| 1 | 张三 | 18 | 2 | 李四 | 22 | 3 | 王五 | 34 |
|---|---|---|---|---|---|---|---|---|
好处是想查某个人所有的属性时，可以通过一次磁盘查找加顺序读取就可以。但是当想查所有人的年龄时，需要不停的查找，或者全表扫描才行，遍历的很多数据都是不需要的。
而采用列式存储时，数据在磁盘上的组织结构为：
| 1 | 2 | 3 | 张三 | 李四 | 王五 | 18 | 22 | 34 |
|---|---|---|---|---|---|---|---|---|
这时想查所有人的年龄只需把年龄那一列拿出来就可以了
一、CentOS7安装ClickHouse
1.1 安装前准备
1.1.1 CentOS取消打开文件数限制
在/etc/security/limits.conf、/etc/security/limits.d/90-nproc.conf这2个文件的末尾加入一下内容：
[root@master ~]# vim /etc/security/limits.conf
在文件末尾添加：
* soft nofile 65536
* hard nofile 65536
* soft nproc 131072
* hard nproc 131072
[root@master ~]# vim /etc/security/limits.d/20-nproc.conf
在文件末尾添加：
* soft nofile 65536
* hard nofile 65536
* soft nproc 131072
* hard nproc 131072
重启服务器之后生效，用 ulimit -n 或者 ulimit -a 查看设置结果
1.1.2 CentOS取消SELINUX
修改/etc/selinux/config中的SELINUX=disabled后重启
[root@master ~]# vim /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three values:
# targeted - Targeted processes are protected,
# minimum - Modification of targeted policy. Only selected processes are protect
ed. # mls - Multi Level Security protection.
SELINUXTYPE=targeted
1.1.3 关闭防火墙
1、命令行界面输入命令“systemctl status firewalld.service”并按下回车键。
2、然后在下方可度以查看得到“active（running）”，此时说明防火墙已经被打开了。
3、在命令行中输入systemctl stop firewalld.service命令，进行关闭防火墙。
4、然后再使用命令systemctl status firewalld.service，在下方出现disavtive（dead），这权样就说明防火墙已经关闭。
5、再在命令行中输入命令“systemctl disable firewalld.service”命令，即可永久关闭防火墙。
1.2 单机安装
1 网址
下载地址：http://repo.red-soft.biz/repos/clickhouse/
2 单机模式
大数据培训之ClickHouse安装
2.1 上传个文件到linux
[root@master clickhouse_softs]# ll
总用量 34636
-rw-r--r-- 1 root root 6376 3月 10 14:32 clickhouse-client-19.7.3.9-1.el7.x86_64.rpm
-rw-r--r-- 1 root root 25990492 3月 10 14:32 clickhouse-common-static-19.7.3.9-1.el7.x86_64.rpm
-rw-r--r-- 1 root root 9453456 3月 10 14:32 clickhouse-server-19.7.3.9-1.el7.x86_64.rpm
-rw-r--r-- 1 root root 9944 3月 10 14:32 clickhouse-server-common-19.7.3.9-1.el7.x86_64.rpm
2.2分别安装这5个rpm文件
[root@master clickhouse_softs]# rpm -ivh *.rpm
准备中... ################################# [100%]
正在升级/安装...
1:clickhouse-server-common-19.7.3.9################################# [ 25%]
2:clickhouse-common-static-19.7.3.9################################# [ 50%]
3:clickhouse-server-19.7.3.9-1.el7 ################################# [ 75%]
Create user clickhouse.clickhouse with datadir /var/lib/clickhouse
4:clickhouse-client-19.7.3.9-1.el7 ################################# [100%]
Create user clickhouse.clickhouse with datadir /var/lib/clickhouse
2.3 启动ClickServer
[root@master clickhouse_softs]# service clickhouse-server start
Start clickhouse-server service: Path to data directory in /etc/clickhouse-server/config.xml: /var/lib/clickhouse/DONE
2.2.4 使用client连接server
[root@master clickhouse_softs]# clickhouse-client
ClickHouse client version 19.7.3.1.
Connecting to localhost:9000 as user default.
Connected to ClickHouse server version 19.7.3 revision 54419.
master :)
master :)
master :) quit
Bye.
1.3 分布式集群安装
1.3.1 另外几台机器同样需要做安装前准备
1.3.2 将4个rpm包上传到另外几台机器
1.3.3 分别安装
[root@node01 clickhouse_softs]# ll
总用量 0
[root@node01 clickhouse_softs]# rpm -ivh *.rpm
准备中... ################################# [100%]
正在升级/安装...
1:clickhouse-server-common-19.7.3.9################################# [ 25%]
2:clickhouse-common-static-19.7.3.9################################# [ 50%]
3:clickhouse-server-19.7.3.9-1.el7 ################################# [ 75%]
Create user clickhouse.clickhouse with datadir /var/lib/clickhouse
4:clickhouse-client-19.7.3.9-1.el7 ################################# [100%]
Create user clickhouse.clickhouse with datadir /var/lib/clickhouse
[root@node02 clickhouse_softs]# rpm -ivh *.rpm
准备中... ################################# [100%]
正在升级/安装...
1:clickhouse-server-common-19.7.3.9################################# [ 25%]
2:clickhouse-common-static-19.7.3.9################################# [ 50%]
3:clickhouse-server-19.7.3.9-1.el7 ################################# [ 75%]
Create user clickhouse.clickhouse with datadir /var/lib/clickhouse
4:clickhouse-client-19.7.3.9-1.el7 ################################# [100%]
Create user clickhouse.clickhouse with datadir /var/lib/clickhouse
1.3.4 每台机器修改config.xml文件 ，将<listen_host>::</listen_host>注释放开即可
[root@node02 clickhouse_softs]# vim /etc/clickhouse-server/config.xml
<!-- Port for communication between replicas. Used for data exchange. -->
<interserver_http_port>9009</interserver_http_port>
<!-- Hostname that is used by other replicas to request this server.
If not specified, than it is determined analoguous to 'hostname -f' command.
This setting could be used to switch replication to another network interface.
-->
<!--
<interserver_http_host>example.yandex.ru</interserver_http_host>
-->
<!-- Listen specified host. use :: (wildcard IPv6 address), if you want to accept connections both with IPv4 and IPv6 from everywhere. -->
<listen_host>::</listen_host>
<!-- Same for hosts with disabled ipv6: -->
<!-- <listen_host>0.0.0.0</listen_host> -->
<!-- Default values - try listen localhost on ipv4 and ipv6: -->
1.3.5 每台机器创建metrika.xml
[root@node02 clickhouse_softs]# vim /etc/metrika.xml
内容如下：
<yandex>
<clickhouse_remote_servers>
<clickhouse_cluster>
<shard>
<internal_replication>true</internal_replication>
<replica>
<host>master</host> (第一台服务器的主机名或ip)
<port>9000</port>
</replica>
</shard>
<shard>
<replica>
<internal_replication>true</internal_replication>
<host>node01</host> (第二台服务器的主机名或ip)
<port>9000</port>
</replica>
</shard>
<shard>
<internal_replication>true</internal_replication>
<replica>
<host>node02</host> (第三台服务器的主机名或ip)
<port>9000</port>
</replica>
</shard>
</clickhouse_cluster>
</clickhouse_remote_servers>
<zookeeper-servers>
<node index="1">
<host>master</host> (第一台服务器的主机名或ip)
<port>2181</port>
</node>
<node index="2">
<host>node01</host> (第二台服务器的主机名或ip)
<port>2181</port>
</node>
<node index="3">
<host>node02</host> (第三台服务器的主机名或ip)
<port>2181</port>
</node>
</zookeeper-servers>
<macros>
<replica>node02</replica> (里要写本机的地址,另外两台记得改为对应的地址)
</macros>
<networks>
<ip>::/0</ip>
</networks>
<clickhouse_compression>
<case>
<min_part_size>10000000000</min_part_size>
<min_part_size_ratio>0.01</min_part_size_ratio>
<method>lz4</method>
</case>
</clickhouse_compression>
</yandex>
1.3.6 每台机器先启动zookeeper
[root@node02 soft]# zkServer.sh start
JMX enabled by default
Using config: /usr/local/soft/zookeeper-3.4.6/bin/../conf/zoo.cfg
Starting zookeeper ... STARTED
1.3.7 每台机器启动clickhouse
[root@node01 soft]# service clickhouse-server start
Start clickhouse-server service: Path to data directory in /etc/clickhouse-server/co
nfig.xml: /var/lib/clickhouse/DONE
1.3.8 验证，进入client
[root@master soft]# clickhouse-client -m
ClickHouse client version 19.7.3.1.
Connecting to localhost:9000 as user default.
Connected to ClickHouse server version 19.7.3 revision 54419.
master :)
1.3.9 验证集群是否创建成功，输入 select * from system.clusters;
master :) select * from system.clusters;
SELECT *
FROM system.clusters
┌─cluster───────────────────────────┬─shard_num─┬─shard_weight─┬─replica_num─┬─host_name─┬─host_address───┬─port─┬─is_local─┬─user────┬─default_database─┐
│ clickhouse_cluster │ 1 │ 1 │ 1 │ master │ 192.168.41.105 │ 9000 │ 1 │ default │ │
│ clickhouse_cluster │ 2 │ 1 │ 1 │ node01 │ 192.168.41.106 │ 9000 │ 0 │ default │ │
│ clickhouse_cluster │ 3 │ 1 │ 1 │ node02 │ 192.168.41.107 │ 9000 │ 0 │ default │ │
│ test_cluster_two_shards_localhost │ 1 │ 1 │ 1 │ localhost │ ::1 │ 9000 │ 1 │ default │ │
│ test_cluster_two_shards_localhost │ 2 │ 1 │ 1 │ localhost │ ::1 │ 9000 │ 1 │ default │ │
│ test_shard_localhost │ 1 │ 1 │ 1 │ localhost │ ::1 │ 9000 │ 1 │ default │ │
│ test_shard_localhost_secure │ 1 │ 1 │ 1 │ localhost │ ::1 │ 9440 │ 0 │ default │ │
│ test_unavailable_shard │ 1 │ 1 │ 1 │ localhost │ ::1 │ 9000 │ 1 │ default │ │
│ test_unavailable_shard │ 2 │ 1 │ 1 │ localhost │ ::1 │ 1 │ 0 │ default │ │
└───────────────────────────────────┴───────────┴──────────────┴─────────────┴───────────┴────────────────┴──────┴──────────┴─────────┴──────────────────┘
9 rows in set. Elapsed: 0.001 sec.
