TI BLE:SCAN

主机会运行SCAN来搜寻广播中的设备

 

运行函数：

GAPCentralRole_StartDiscovery( DEFAULT_DISCOVERY_MODE,
DEFAULT_DISCOVERY_ACTIVE_SCAN,
DEFAULT_DISCOVERY_WHITE_LIST ); 

 1 /**
 2  * @brief   Start a device discovery scan.
 3  *
 4  * Public function defined in central.h.
 5  */
 6 bStatus_t GAPCentralRole_StartDiscovery( uint8 mode, uint8 activeScan, uint8 whiteList )
 7 {
 8   gapDevDiscReq_t params;
 9 
10   params.taskID = gapCentralRoleTaskId;
11   params.mode = mode;
12   params.activeScan = activeScan;
13   params.whiteList = whiteList;
14 
15   return GAP_DeviceDiscoveryRequest( &params );
16 }
GAPCentralRole_StartDiscovery

最终使用的是API：GAP_DeviceDiscoveryRequest

来看几个参数：DEFAULT_DISCOVERY_MODE

// Discovey mode (limited, general, all)
#define DEFAULT_DISCOVERY_MODE     DEVDISC_MODE_ALL

#define DEVDISC_MODE_NONDISCOVERABLE 0x00 //!< No discoverable setting
#define DEVDISC_MODE_GENERAL 0x01 //!< General Discoverable devices
#define DEVDISC_MODE_LIMITED 0x02 //!< Limited Discoverable devices
#define DEVDISC_MODE_ALL 0x03 //!< Not filtered

// TRUE to use active scan
#define DEFAULT_DISCOVERY_ACTIVE_SCAN TRUE

// TRUE to use white list during discovery
#define DEFAULT_DISCOVERY_WHITE_LIST FALSE

//TRUE to only allow advertisements from devices in the white list. 

 

初始化函数中有些设置：


// Setup Central Profile
{
uint8 scanRes = DEFAULT_MAX_SCAN_RES;
GAPCentralRole_SetParameter ( GAPCENTRALROLE_MAX_SCAN_RES, sizeof( uint8 ), &scanRes );
}

// Maximum number of scan responses
#define DEFAULT_MAX_SCAN_RES 8

最大的支持扫描到的器件数，为8

 

GAP_SetParamValue( TGAP_GEN_DISC_SCAN, DEFAULT_SCAN_DURATION );
GAP_SetParamValue( TGAP_LIM_DISC_SCAN, DEFAULT_SCAN_DURATION );

// Scan duration in ms
#define DEFAULT_SCAN_DURATION 4000

#define TGAP_GEN_DISC_SCAN 2 //!< Minimum time to perform scanning, when performing General Discovery proc (mSec)
#define TGAP_LIM_DISC_SCAN 3 //!< Minimum time to perform scanning, when performing Limited Discovery proc (mSec)

 

主机的发现过程，有两个事件：GAP_DEVICE_INFO_EVENT，GAP_DEVICE_DISCOVERY_EVENT

#define GAP_DEVICE_INFO_EVENT                 0x0D //!< Sent during the Device Discovery Process when a device is discovered. This event is sent as an OSAL message defined as gapDeviceInfoEvent_t.

发现当中每发现一个device就触发一次

#define GAP_DEVICE_DISCOVERY_EVENT            0x01 //!< Sent when the Device Discovery Process is complete. This event is sent as an OSAL message defined as gapDevDiscEvent_t.

发现结束时候调用

 1 case GAP_DEVICE_INFO_EVENT:
 2       {
 3         // if filtering device discovery results based on service UUID
 4         if ( DEFAULT_DEV_DISC_BY_SVC_UUID == TRUE )
 5         {
 6           if ( simpleBLEFindSvcUuid( SIMPLEPROFILE_SERV_UUID,
 7                                      pEvent->deviceInfo.pEvtData,
 8                                      pEvent->deviceInfo.dataLen ) )
 9           {
10             simpleBLEAddDeviceInfo( pEvent->deviceInfo.addr, pEvent->deviceInfo.addrType );
11           }
12         }
13       }
14       break;
GAP_DEVICE_INFO_EVENT

 

每次发现会调用两个函数：simpleBLEFindSvcUuid，确定发现的设备SvcUUid是否匹配，匹配的话调用simpleBLEAddDeviceInfo将其地址加入列表

 1 /*********************************************************************
 2  * @fn      simpleBLEFindSvcUuid
 3  *
 4  * @brief   Find a given UUID in an advertiser's service UUID list.
 5  *
 6  * @return  TRUE if service UUID found
 7  */
 8 static bool simpleBLEFindSvcUuid( uint16 uuid, uint8 *pData, uint8 dataLen )
 9 {
10   uint8 adLen;
11   uint8 adType;
12   uint8 *pEnd;
13   
14   pEnd = pData + dataLen - 1;
15   
16   // While end of data not reached
17   while ( pData < pEnd )
18   {
19     // Get length of next AD item
20     adLen = *pData++;
21     if ( adLen > 0 )
22     {
23       adType = *pData;
24       
25       // If AD type is for 16-bit service UUID
26       if ( adType == GAP_ADTYPE_16BIT_MORE || adType == GAP_ADTYPE_16BIT_COMPLETE )
27       {
28         pData++;
29         adLen--;
30         
31         // For each UUID in list
32         while ( adLen >= 2 && pData < pEnd )
33         {
34           // Check for match
35           if ( pData[0] == LO_UINT16(uuid) && pData[1] == HI_UINT16(uuid) )
36           {
37             // Match found
38             return TRUE;
39           }
40           
41           // Go to next
42           pData += 2;
43           adLen -= 2;
44         }
45         
46         // Handle possible erroneous extra byte in UUID list
47         if ( adLen == 1 )
48         {
49           pData++;
50         }
51       }
52       else
53       {
54         // Go to next item
55         pData += adLen;
56       }
57     }
58   }
59   
60   // Match not found
61   return FALSE;
62 }
simpleBLEFindSvcUuid

这个函数利用广播数据格式来判断，先找到类型字节，判断类型是否是uuid，是的话判断内容，不是的话调到下一段内容，把广播格式再粘一次

 1 / GAP - Advertisement data (max size = 31 bytes, though this is
 2 // best kept short to conserve power while advertisting)
 3 static uint8 advertData[] =
 4 {
 5   // Flags; this sets the device to use limited discoverable
 6   // mode (advertises for 30 seconds at a time) instead of general
 7   // discoverable mode (advertises indefinitely)
 8   0x02,   // length of this data
 9   GAP_ADTYPE_FLAGS,
10   DEFAULT_DISCOVERABLE_MODE | GAP_ADTYPE_FLAGS_BREDR_NOT_SUPPORTED,
11 
12   // service UUID, to notify central devices what services are included
13   // in this peripheral
14   0x03,   // length of this data
15   GAP_ADTYPE_16BIT_MORE,      // some of the UUID's, but not all
16   LO_UINT16( SIMPLEPROFILE_SERV_UUID ),
17   HI_UINT16( SIMPLEPROFILE_SERV_UUID ),
18 
19 };
advertData

如果是的话加入数组当中，也将扫描到的设备数+1

 1 /*********************************************************************
 2  * @fn      simpleBLEAddDeviceInfo
 3  *
 4  * @brief   Add a device to the device discovery result list
 5  *
 6  * @return  none
 7  */
 8 static void simpleBLEAddDeviceInfo( uint8 *pAddr, uint8 addrType )
 9 {
10   uint8 i;
11   
12   // If result count not at max
13   if ( simpleBLEScanRes < DEFAULT_MAX_SCAN_RES )
14   {
15     // Check if device is already in scan results
16     for ( i = 0; i < simpleBLEScanRes; i++ )
17     {
18       if ( osal_memcmp( pAddr, simpleBLEDevList[i].addr , B_ADDR_LEN ) )
19       {
20         return;
21       }
22     }
23     
24     // Add addr to scan result list
25     osal_memcpy( simpleBLEDevList[simpleBLEScanRes].addr, pAddr, B_ADDR_LEN );
26     simpleBLEDevList[simpleBLEScanRes].addrType = addrType;
27     
28     // Increment scan result count
29     simpleBLEScanRes++;
30   }
31 }
simpleBLEAddDeviceInfo

 

发现结束后会将数组转移做些存储然后指示用户下一步

 1 case GAP_DEVICE_DISCOVERY_EVENT:
 2       {
 3         // discovery complete
 4         simpleBLEScanning = FALSE;
 5 
 6         // if not filtering device discovery results based on service UUID
 7         if ( DEFAULT_DEV_DISC_BY_SVC_UUID == FALSE )
 8         {
 9           // Copy results
10           simpleBLEScanRes = pEvent->discCmpl.numDevs;
11           osal_memcpy( simpleBLEDevList, pEvent->discCmpl.pDevList,
12                        (sizeof( gapDevRec_t ) * pEvent->discCmpl.numDevs) );
13         }
14         
15         LCD_WRITE_STRING_VALUE( "Devices Found", simpleBLEScanRes,
16                                 10, HAL_LCD_LINE_1 );
17         if ( simpleBLEScanRes > 0 )
18         {
19           LCD_WRITE_STRING( "<- To Select", HAL_LCD_LINE_2 );
20         }
21 
22         // initialize scan index to last device
23         simpleBLEScanIdx = simpleBLEScanRes;
24 
25       }
26       break;
GAP_DEVICE_DISCOVERY_EVENT

 

key里面有个更新显示，对于收到的device比较多的时候：

 1  if ( keys & HAL_KEY_LEFT )
 2   {
 3     // Display discovery results
 4     if ( !simpleBLEScanning && simpleBLEScanRes > 0 )
 5     {
 6         // Increment index of current result (with wraparound)
 7         simpleBLEScanIdx++;
 8         if ( simpleBLEScanIdx >= simpleBLEScanRes )
 9         {
10           simpleBLEScanIdx = 0;
11         }
12         
13         LCD_WRITE_STRING_VALUE( "Device", simpleBLEScanIdx + 1,
14                                 10, HAL_LCD_LINE_1 );
15         LCD_WRITE_STRING( bdAddr2Str( simpleBLEDevList[simpleBLEScanIdx].addr ),
16                           HAL_LCD_LINE_2 );
17     }
18   }
HAL_KEY_LEFT

 

posted @ 2014-03-31 16:37  wwjdwy  阅读(2157)  评论(0)  编辑  收藏  举报