自己收集整理的微软错误代码大全（中文和英文）

   

       自己收集整理的微软错误代码大全，分别为中文和英文部分，供广大软件开发人员共勉。

 

 

                 微软错误代码

2.1  中文

0 操作成功完成。
1 功能错误。
2 系统找不到指定的文件。
3 系统找不到指定的路径。
4 系统无法打开文件。
5 拒绝访问。
6 句柄无效。
7 存储控制块被损坏。
8 存储空间不足，无法处理此命令。
9 存储控制块地址无效。
10 环境错误。
11 试图加载格式错误的程序。
12 访问码无效。
13 数据无效。
14 存储器不足，无法完成此操作。
15 系统找不到指定的驱动器。
16 无法删除目录。
17 系统无法将文件移到不同的驱动器。
18 没有更多文件。
19 介质受写入保护。
20 系统找不到指定的设备。
21 设备未就绪。
22 设备不识别此命令。
23 数据错误 (循环冗余检查)。
24 程序发出命令，但命令长度不正确。
25 驱动器无法找出磁盘上特定区域或磁道的位置。
26 无法访问指定的磁盘或软盘。
27 驱动器找不到请求的扇区。
28 打印机缺纸。
29 系统无法写入指定的设备。
30 系统无法从指定的设备上读取。
31 连到系统上的设备没有发挥作用。
32 进程无法访问文件，因为另一个程序正在使用此文件。
33 进程无法访问文件，因为另一个程序已锁定文件的一部分。
36 用来共享的打开文件过多。
38 到达文件结尾。
39 磁盘已满。
50 不支持网络请求。
51 远程计算机不可用 。
52 在网络上已有重复的名称。
53 找不到网络路径。
54 网络忙。
55 指定的网络资源或设备不再可用。
56 已到达网络 BIOS 命令限制。
57 网络适配器硬件出错。
58 指定的服务器无法运行请求的操作。
59 发生意外的网络错误。
60 远程适配器不兼容。
61 打印机队列已满。
62 无法在服务器上获得用于保存待打印文件的空间。
63 删除等候打印的文件。
64 指定的网络名不再可用。
65 拒绝网络访问。
66 网络资源类型错误。
67 找不到网络名。
68 超过本地计算机网卡的名称限制。
69 超出网络 BIOS 会话限制。
70 远程服务器已暂停，或正在启动过程中。
71 当前已无法再同此远程计算机连接，因为已达到计算机的连接数目极限。
72 已暂停指定的打印机或磁盘设备。
80 文件存在。
82 无法创建目录或文件。
83 INT 24 失败。
84 无法取得处理此请求的存储空间。
85 本地设备名已在使用中。
86 指定的网络密码错误。
87 参数错误。
88 网络上发生写入错误。
89 系统无法在此时启动另一个进程。
100 无法创建另一个系统信号灯。
101 另一个进程拥有独占的信号灯。
102 已设置信号灯且无法关闭。
103 无法再设置信号灯。
104 无法在中断时请求独占的信号灯。
105 此信号灯的前一个所有权已结束。
107 程序停止，因为替代的软盘未插入。
108 磁盘在使用中，或被另一个进程锁定。
109 管道已结束。
110 系统无法打开指定的设备或文件。
111 文件名太长。
112 磁盘空间不足。
113 无法再获得内部文件的标识。
114 目标内部文件的标识不正确。
117 应用程序制作的 IOCTL 调用错误。
118 验证写入的切换参数值错误。
119 系统不支持请求的命令。
120 此功能只被此系统支持。
121 信号灯超时时间已到。
122 传递到系统调用的数据区太小。
123 文件名、目录名或卷标语法不正确。
124 系统调用级别错误。
125 磁盘没有卷标。
126 找不到指定的模块。
127 找不到指定的程序。
128 没有等候的子进程。
130 试图使用操作(而非原始磁盘 I/O)的已打开磁盘分区的文件句柄。
131 试图移动文件指针到文件开头之前。
132 无法在指定的设备或文件上设置文件指针。
133 包含先前加入驱动器的驱动器无法使用 JOIN 或 SUBST 命令。
134 试图在已被合并的驱动器上使用 JOIN 或 SUBST 命令。
135 试图在已被合并的驱动器上使用 JOIN 或 SUBST 命令。
136 系统试图解除未合并驱动器的 JOIN。
137 系统试图解除未替代驱动器的 SUBST。
138 系统试图将驱动器合并到合并驱动器上的目录。
139 系统试图将驱动器替代为替代驱动器上的目录。
140 系统试图将驱动器合并到替代驱动器上的目录。
141 系统试图替代驱动器为合并驱动器上的目录。
142 系统无法在此时运行 JOIN 或 SUBST。
143 系统无法将驱动器合并到或替代为相同驱动器上的目录。
144 目录并非根目录下的子目录。
145 目录非空。
146 指定的路径已在替代中使用。
147 资源不足，无法处理此命令。
148 指定的路径无法在此时使用。
149 企图将驱动器合并或替代为驱动器上目录是上一个替代的目标的驱动器。
150 系统跟踪信息未在 CONFIG.SYS 文件中指定，或不允许跟踪。
151 为 DosMuxSemWait 指定的信号灯事件个数错误。
152 DosMuxSemWait 不可运行。已设置过多的信号灯。
153 DosMuxSemWait 清单错误。
154 输入的卷标超过目标文件系统的长度限制
155 无法创建另一个线程。
156 接收进程已拒绝此信号。
157 段已被放弃且无法锁定。
158 段已解除锁定。
159 线程标识的地址错误。
160 传递到 DosExecPgm 的参数字符串错误。
161 指定的路径无效。
162 信号已暂停。
164 无法在系统中创建更多的线程。
167 无法锁定文件区域。
170 请求的资源在使用中。
173 对于提供取消区域进行锁定的请求不明显。
174 文件系统不支持锁定类型的最小单元更改。
180 系统检测出错误的段号。
183 当文件已存在时，无法创建该文件。
186 传递的标志错误。
187 找不到指定的系统信号灯名称。
196 操作系统无法运行此应用程序。
197 操作系统当前的配置不能运行此应用程序。
199 操作系统无法运行此应用程序。
200 代码段不可大于或等于 64K。
203 操作系统找不到已输入的环境选项。
205 命令子树中的进程没有信号处理程序。
206 文件名或扩展名太长。
207 第 2 环堆栈已被占用。
208 没有正确输入文件名通配符 * 或 ?，或指定过多的文件名通配符。
209 正在发送的信号错误。
210 无法设置信号处理程序。
212 段已锁定且无法重新分配。
214 连到该程序或动态链接模块的动态链接模块太多。
215 无法嵌套调用 LoadModule。
230 管道状态无效。
231 所有的管道实例都在使用中。
232 管道正在关闭中。
233 管道的另一端上无任何进程。
234 更多数据可用。
240 取消会话。
254 指定的扩展属性名无效。
255 扩展属性不一致。
258 等待的操作过时。
259 没有可用的数据了。
266 无法使用复制功能。
267 目录名无效。
275 扩展属性在缓冲区中不适用。
276 装在文件系统上的扩展属性文件已损坏。
277 扩展属性表格文件已满。
278 指定的扩展属性句柄无效。
282 装入的文件系统不支持扩展属性。
288 企图释放并非呼叫方所拥有的多用户终端运行程序。
298 发向信号灯的请求过多。
299 仅完成部分的 ReadProcessMemoty 或 WriteProcessMemory 请求。
300 操作锁定请求被拒绝。
301 系统接收了一个无效的操作锁定确认。
487 试图访问无效的地址。
534 算术结果超过 32 位。
535 管道的另一端有一进程。
536 等候打开管道另一端的进程。
994 拒绝访问扩展属性。
995 由于线程退出或应用程序请求，已放弃 I/O 操作。
996 重叠 I/O 事件不在信号状态中。
997 重叠 I/O 操作在进行中。
998 内存分配访问无效。
999 错误运行页内操作。

1001 递归太深；栈溢出。
1002 窗口无法在已发送的消息上操作。
1003 无法完成此功能。
1004 无效标志。
1005 此卷不包含可识别的文件系统。请确定所有请求的文件系统驱动程序已加载，且此卷未损坏。
1006 文件所在的卷已被外部改变，因此打开的文件不再有效。
1007 无法在全屏幕模式下运行请求的操作。
1008 试图引用不存在的令牌。
1009 配置注册表数据库损坏。
1010 配置注册表项无效。
1011 无法打开配置注册表项。
1012 无法读取配置注册表项。
1013 无法写入配置注册表项。
1014 注册表数据库中的某一文件必须使用记录或替代复制来恢复。恢复成功完成。
1015 注册表损坏。包含注册表数据的某一文件结构损坏，或系统的文件内存映像损坏，或因为替代副本、日志缺少或损坏而无法恢复文件。
1016 由注册表启动的 I/O 操作恢复失败。注册表无法读入、写出或清除任意一个包含注册表系统映像的文件。
1017 系统试图加载或还原文件到注册表，但指定的文件并非注册表文件格式。
1018 试图在标记为删除的注册表项上运行不合法的操作。
1019 系统无法配置注册表日志中所请求的空间。
1020 无法在已有子项或值的注册表项中创建符号链接。
1021 无法在易变父项下创建稳定子项。
1022 通知更改请求正在完成中，且信息并未返回到呼叫方的缓冲区中。当前呼叫方必须枚举文件来查找更改。
1051 已发送停止控制到服务，该服务被其它正在运行的服务所依赖。
1052 请求的控件对此服务无效
1053 服务并未及时响应启动或控制请求。
1054 无法创建此服务的线程。
1055 锁定服务数据库。
1056 服务的实例已在运行中。
1057 帐户名无效或不存在，或者密码对于指定的帐户名无效。
1058 无法启动服务，原因可能是它被禁用或与它相关联的设备没有启动。
1059 指定了循环服务依存。
1060 指定的服务并未以已安装的服务存在。
1061 服务无法在此时接受控制信息。
1062 服务未启动。
1063 服务进程无法连接到服务控制器上。
1064 当处理控制请求时，在服务中发生异常。
1065 指定的数据库不存在。
1066 服务已返回特定的服务错误码。
1067 进程意外终止。
1068 依存服务或组无法启动。
1069 由于登录失败而无法启动服务。
1070 启动后，服务停留在启动暂停状态。
1071 指定的服务数据库锁定无效。
1072 指定的服务已标记为删除。
1073 指定的服务已存在。
1074 系统当前以最新的有效配置运行。
1075 依存服务不存在，或已被标记为删除。
1076 已接受使用当前引导作为最后的有效控制设置。
1077 上次启动之后，仍未尝试引导服务。
1078 名称已用作服务名或服务显示名。
1079 此服务的帐户不同于运行于同一进程上的其它服务的帐户。
1080 只能为 Win32 服务设置失败操作，不能为驱动程序设置。
1081 这个服务所运行的处理和服务控制管理器相同。所以，如果服务处理程序意外中止的话，服务控制管理器无法进行任何操作。
1082 这个服务尚未设置恢复程序。
1083 配置成在该可执行程序中运行的这个服务不能执行该服务。
1100 已达磁带的实际结尾。
1101 磁带访问已达文件标记。
1102 已达磁带或磁盘分区的开头。
1103 磁带访问已达一组文件的结尾。
1104 磁带上不再有任何数据。
1105 磁带无法分区。
1106 在访问多卷分区的新磁带时，当前的块大小不正确。
1107 当加载磁带时，找不到分区信息。
1108 无法锁定媒体弹出功能。
1109 无法卸载介质。
1110 驱动器中的介质可能已更改。
1111 复位 I/O 总线。
1112 驱动器中没有媒体。
1113 在多字节的目标代码页中，没有此 Unicode 字符可以映射到的字符。
1114 动态链接库 (DLL) 初始化例程失败。
1115 系统关机正在进行。
1116 因为没有任何进行中的关机过程，所以无法中断系统关机。
1117 因为 I/O 设备错误，所以无法运行此项请求。
1118 没有串行设备被初始化成功。串行驱动程序将卸载。
1119 无法打开正在与其他设备共享中断请求(IRQ)的设备。至少有一个使用该 IRQ 的其他设备已打开。
1120 序列 I/O 操作已由另一个串行口的写入完成。(IOCTL_SERIAL_XOFF_COUNTER 已达零。)
1121 因为已过超时时间，所以串行 I/O 操作完成。(IOCTL_SERIAL_XOFF_COUNTER 未达零。)
1122 在软盘上找不到 ID 地址标记。
1123 软盘扇区 ID 字符域与软盘控制器磁道地址不相符。
1124 软盘控制器报告软盘驱动程序不能识别的错误。
1125 软盘控制器返回与其寄存器中不一致的结果。
1126 当访问硬盘时，重新校准操作失败，重试仍然失败。
1127 当访问硬盘时，磁盘操作失败，重试仍然失败。
1128 当访问硬盘时，即使失败，仍须复位磁盘控制器。
1129 已达磁带结尾。
1130 服务器存储空间不足，无法处理此命令。
1131 检测出潜在的死锁状态。
1132 指定的基址或文件偏移量没有适当对齐。
1140 改变系统供电状态的尝试被另一应用程序或驱动程序否决。
1141 系统 BIOS 改变系统供电状态的尝试失败。
1142 试图在一文件上创建超过系统允许数额的链接。
1150 指定程序要求更新的 Windows 版本。
1151 指定程序不是 Windows 或 MS-DOS 程序。
1152 只能启动该指定程序的一个实例。
1153 该指定程序适用于旧的 Windows 版本。
1154 执行该应用程序所需的库文件之一被损坏。
1155 没有应用程序与此操作的指定文件有关联。
1156 在输送指令到应用程序的过程中出现错误。　
1157 执行该应用程序所需的库文件之一无法找到。
1158 当前程序已使用了 Window 管理器对象的系统允许的所有句柄。
1159 消息只能与同步操作一起使用。
1160 指出的源元素没有媒体。
1161 指出的目标元素已包含媒体。
1162 指出的元素不存在。
1163 指出的元素是未显示的存储资源的一部分。
1164 显示设备需要重新初始化，因为硬件有错误。
1165 设备显示在尝试进一步操作之前需要清除。
1166 设备显示它的门仍是打开状态。
1167 设备没有连接。
1168 找不到元素。
1169 索引中没有同指定项相匹配的项。
1170 在对象上不存在指定的属性集。
1171 传递到 GetMouseMovePoints 的点不在缓冲区中。
1172 跟踪(工作站)服务没运行。
1173 找不到卷 ID。
1175 无法删除要被替换的文件。
1176 无法将替换文件移到要被替换的文件。要被替换的文件保持原来的名称。
1177 无法将替换文件移到要被替换的文件。要被替换的文件已被重新命名为备份名称。
1178 卷更改记录被删除。
1179 卷更改记录服务不处于活动中。
1180 找到一份文件，但是可能不是正确的文件。
1181 日志项从日志中被删除。
1200 指定的设备名无效。
1201 设备当前未连接上，但其为一个记录连接。
1202 企图记录先前已被记录的设备。
1203 无任何网络提供程序接受指定的网络路径。
1204 指定的网络提供程序名称无效。
1205 无法打开网络连接配置文件。
1206 网络连接配置文件损坏。
1207 无法枚举空载体。
1208 发生扩展错误。
1209 指定的组名格式无效。
1210 指定的计算机名格式无效。
1211 指定的事件名格式无效。
1212 指定的域名格式无效。
1213 指定的服务名格式无效。
1214 指定的网络名格式无效。
1215 指定的共享名格式无效。
1216 指定的密码格式无效。
1217 指定的消息名格式无效。
1218 指定的消息目标格式无效。
1219 提供的凭据与已存在的凭据集冲突。
1220 企图创建网络服务器的会话，但已对该服务器创建过多的会话。
1221 工作组或域名已由网络上的另一部计算机使用。
1222 网络未连接或启动。
1223 操作已被用户取消。
1224 请求的操作无法在使用用户映射区域打开的文件上执行。
1225 远程系统拒绝网络连接。
1226 网络连接已被适当地关闭了。
1227 网络传输终结点已有与其关联的地址。
1228 地址仍未与网络终结点关联。
1229 企图在不存在的网络连接上进行操作。
1230 企图在使用中的网络连接上进行无效的操作。
1231 不能访问网络位置。有关网络排除故障的信息，请参阅 Windows 帮助。
1232 不能访问网络位置。有关网络排除故障的信息，请参阅 Windows 帮助。
1233 不能访问网络位置。有关网络排除故障的信息，请参阅 Windows 帮助。
1234 没有任何服务正在远程系统上的目标网络终结点上操作。
1235 请求被终止。
1236 由本地系统终止网络连接。
1237 操作无法完成。应该重试。
1238 因为已达到此帐户的最大同时连接数限制，所以无法连接服务器。
1239 试图在这个帐户未被授权的时间内登录。
1240 此帐户并未得到从这个工作站登录的授权。
1241 请求的操作不能使用这个网络地址。
1242 服务器已经注册。
1243 指定的服务不存在。
1244 因为用户还未被验证，不能执行所要求的操作。
1245 因为用户还未登录网络，不能执行所要求的操作。指定的服务不存在。
1246 正在继续工作。
1247 试图进行初始操作，但是初始化已完成。
1248 没有更多的本地设备。　
1249 指定的站点不存在。
1250 具有指定名称的域控制器已经存在。
1251 只有连接到服务器上时，该操作才受支持。
1252 即使没有改动，组策略框架也应该调用扩展。
1253 指定的用户没有一个有效的配置文件。
1254 Microsoft Small Business Server 不支持此操作。
1300 并非所有被引用的特权都指派给呼叫方。
1301 帐户名和安全标识间的某些映射未完成。
1302 没有为该帐户特别设置系统配额限制。
1303 没有可用的加密密钥。返回了一个已知加密密钥。
1304 密码太复杂，无法转换成 LAN Manager 密码。返回的 LAN Manager 密码为空字符串。
1305 修订级别未知。
1306 表明两个修订级别是不兼容的。
1307 这个安全标识不能指派为此对象的所有者。
1308 这个安全标识不能指派为对象的主要组。
1309 当前并未模拟客户的线程试图操作模拟令牌。
1310 组可能未被禁用。
1311 当前没有可用的登录服务器来服务登录请求。
1312 指定的登录会话不存在。可能已被终止。
1313 指定的特权不存在。
1314 客户没有所需的特权。
1315 提供的名称并非正确的帐户名形式。
1316 指定的用户已存在。
1317 指定的用户不存在。
1318 指定的组已存在。
1319 指定的组不存在。
1320 指定的用户帐户已是指定组的成员，或是因为组包含成员所以无法删除指定的组。
1321 指定的用户帐户不是指定组帐户的成员。
1322 无法禁用或删除最后剩余的系统管理帐户。
1323 无法更新密码。提供作为当前密码的值不正确。
1324 无法更新密码。提供给新密码的值包含密码中不允许的值。
1325 无法更新密码。为新密码提供的值不符合字符域的长度、复杂性或历史要求。
1326 登录失败: 未知的用户名或错误密码。
1327 登录失败: 用户帐户限制。
1328 登录失败: 违反帐户登录时间限制。
1329 登录失败: 不允许用户登录到此计算机。
1330 登录失败: 指定的帐户密码已过期。
1331 登录失败: 禁用当前的帐户。
1332 帐户名与安全标识间无任何映射完成。
1333 一次请求过多的本地用户标识符(LUIDs)。
1334 无更多可用的本地用户标识符(LUIDs)。
1335 对于该特别用法，安全 ID 的次级授权部分无效。
1336 访问控制列表(ACL)结构无效。
1337 安全 ID 结构无效。
1338 安全描述符结构无效。
1340 无法创建固有的访问控制列表(ACL)或访问控制项目(ACE)。
1341 服务器当前已禁用。
1342 服务器当前已启用。
1343 提供给识别代号颁发机构的值为无效值。
1344 无更多可用的内存以更新安全信息。
1345 指定属性无效，或与整个群体的属性不兼容。
1346 指定的模拟级别无效， 或所提供的模拟级别无效。
1347 无法打开匿名级安全令牌。
1348 请求的验证信息类别无效。
1349 令牌的类型对其尝试使用的方法不适当。
1350 无法在与安全性无关联的对象上运行安全性操作。
1351 未能从域控制器读取配置信息，或者是因为机器不可使用，或者是访问被拒绝。
1352 安全帐户管理器(SAM)或本地安全颁发机构(LSA)服务器处于运行安全操作的错误状态。
1353 域处于运行安全操作的错误状态。
1354 此操作只对域的主要域控制器可行。
1355 指定的域不存在，或无法联系。
1356 指定的域已存在。
1357 试图超出每服务器域个数的限制。
1358 无法完成请求操作，因为磁盘上的严重介质失败或数据结构损坏。
1359 出现了内部错误。
1360 通用访问类型包含于已映射到非通用类型的访问掩码中。
1361 安全描述符格式不正确 (绝对或自相关的)。
1362 请求操作只限制在登录进程中使用。调用进程未注册为一个登录进程。
1363 无法使用已在使用中的标识启动新的会话。
1364 未知的指定验证数据包。
1365 登录会话并非处于与请求操作一致的状态中。
1366 登录会话标识已在使用中。
1367 登录请求包含无效的登录类型值。
1368 在使用命名管道读取数据之前，无法经由该管道模拟。
1369 注册表子树的事务处理状态与请求状态不一致。
1370 安全性数据库内部出现损坏。
1371 无法在内置帐户上运行此操作。
1372 无法在内置特殊组上运行此操作。
1373 无法在内置特殊用户上运行此操作。
1374 无法从组中删除用户，因为当前组为用户的主要组。
1375 令牌已作为主要令牌使用。
1376 指定的本地组不存在。
1377 指定的帐户名不是本地组的成员。
1378 指定的帐户名已是本地组的成员。
1379 指定的本地组已存在。
1380 登录失败: 未授予用户在此计算机上的请求登录类型。
1381 已超过在单一系统中可保存机密的最大个数。
1382 机密的长度超过允许的最大长度。
1383 本地安全颁发机构数据库内部包含不一致性。
1384 在尝试登录的过程中，用户的安全上下文积累了过多的安全标识。
1385 登录失败: 未授予用户在此计算机上的请求登录类型。
1386 更改用户密码时需要交叉加密密码。
1387 由于成员不存在，无法将成员添加到本地组中，也无法从本地组将其删除。
1388 无法将新成员加入到本地组中，因为成员的帐户类型错误。
1389 已指定过多的安全标识。
1390 更改此用户密码时需要交叉加密密码。
1391 表明 ACL 未包含任何可承继的组件。
1392 文件或目录损坏且无法读取。
1393 磁盘结构损坏且无法读取。
1394 无任何指定登录会话的用户会话项。
1395 正在访问的服务有连接数目标授权限制。这时候已经无法再连接，原因是已经到达可接受的连接数目上限。
1396 登录失败: 该目标帐户名称不正确。
1397 相互身份验证失败。该服务器在域控制器的密码过期。
1398 在客户机和服务器之间有一个时间差。
1400 无效的窗口句柄。
1401 无效的菜单句柄。
1402 无效的光标句柄。
1403 无效的加速器表句柄。
1404 无效的挂钩句柄。
1405 无效的多重窗口位置结构句柄。
1406 无法创建最上层子窗口。
1407 找不到窗口类别。
1408 无效窗口；它属于另一线程。
1409 热键已注册。
1410 类别已存在。
1411 类别不存在。
1412 类别仍有打开的窗口。
1413 无效索引。
1414 无效的图标句柄。
1415 使用专用 DIALOG 窗口字。
1416 找不到列表框标识。
1417 找不到通配字符。
1418 线程没有打开的剪贴板。
1419 没有注册热键。
1420 窗口不是合法的对话窗口。
1421 找不到控件 ID。
1422 因为没有编辑控制，所以组合框的消息无效。
1423 窗口不是组合框。
1424 高度必须小于 256。
1425 无效的设备上下文(DC)句柄。
1426 无效的挂接程序类型。
1427 无效的挂接程序。
1428 没有模块句柄无法设置非本机的挂接。
1429 此挂接程序只可整体设置。
1430 Journal Hook 程序已安装。
1431 挂接程序尚未安装。
1432 单一选择列表框的无效消息。
1433 LB_SETCOUNT 发送到非被动的列表框。
1434 此列表框不支持 Tab 键宽度。
1435 无法毁坏由另一个线程创建的对象。
1436 子窗口没有菜单。
1437 窗口没有系统菜单。
1438 无效的消息对话框样式。
1439 无效的系统范围内的 (SPI_*) 参数。
1440 已锁定屏幕。
1441 多重窗口位置结构中窗口的所有句柄必须具有相同的上层。
1442 窗口不是子窗口。
1443 无效的 GW_* 命令。
1444 无效的线程标识。
1445 无法处理非多重文档界面 (MDI) 窗口中的消息。
1446 弹出式菜单已经激活。
1447 窗口没有滚动条。
1448 滚动条范围不可大于 MAXLONG。
1449 无法以指定的方式显示或删除窗口。
1450 系统资源不足，无法完成请求的服务。
1451 系统资源不足，无法完成请求的服务。
1452 系统资源不足，无法完成请求的服务。
1453 配额不足，无法完成请求的服务。
1454 配额不足，无法完成请求的服务。
1455 页面文件太小，无法完成操作。
1456 找不到菜单项。
1457 键盘布局句柄无效。
1458 不允许使用挂钩类型。
1459 该操作需要交互式窗口工作站。
1460 由于超时时间已过，该操作返回。
1461 无效监视器句柄。
1500 事件日志文件损坏。
1501 无法打开事件日志文件，事件日志服务没有启动。
1502 事件日志文件已满。
1503 事件日志文件已在读蠕更改。
1601 无法访问 Windows 安装服务。请与技术支持人员联系，确认 Windows 安装服务是否注册正确。
1602 用户取消了安装。
1603 安装时发生严重错误
1604 安装已挂起，未完成。
1605 这个操作只对当前安装的产品有效。
1606 功能 ID 未注册。
1607 组件 ID 并未注册。
1608 未知属性。
1609 句柄处于不正确的状态。
1610 这个产品的配置数据已损坏。请与技术支持人员联系。
1611 组件限制语不存在。
1612 这个产品的安装来源无法使用。请验证来源是否存在，是否可以访问。
1613 Windows 安装服务无法安装这个安装程序包。您必须安装含有 Windows 安装服务新版本的 Windows Service Park。
1614 没有卸载产品。
1615 SQL 查询语法不正确或不被支持。
1616 记录字符域不存在。
1617 设备已被删除.
1618 正在进行另一个安装操作。请在继续这个安装操作之前完成那个操作。
1619 未能打开这个安装程序包。请验证程序包是否存在，是否可以访问；或者与应用程序供应商联系，验证这是否是有效的 Windows 安装服务程序包。
1620 未能打开这个安装程序包。请与应用程序供应商联系，验证这是否是有效的 Windows 安装服务程序包。
1621 启动 Windows 安装服务用户界面时有错误。请与技术支持人员联系。
1622 打开安装日志文件的错误。请验证指定的日志文件位置是否存在，是否可以写入。
1623 安装程序包的语言不受系统支持。
1624 应用变换时的错误。请验证指定的变换路径是否有效。
1625 系统策略禁止这个安装。请与系统管理员联系。
1626 无法执行函数。
1627 执行期间，函数出了问题。
1628 指定了无效的或未知的表格。
1629 提供的数据类型不对。
1630 这个类型的数据不受支持。
1631 Windows 安装服务未能启动。请与技术支持人员联系。
1632 临时文件夹已满或无法使用。请验证临时文件夹是否存在，是否可以写入。
1633 这个处理器类型不支持该安装程序包。请与产品供应商联系。
1634 组件没有在这台计算机上使用。
1635 无法打开修补程序包。请验证修补程序包是否存在，是否可以访问；或者与应用程序供应商联系，验证这是否是 Windows 安装服务的修补程序包。
1636 无法打开修补程序包。请与应用程序供应商联系，验证这是否是 Windows 安装服务的修补程序包。
1637 Windows 安装服务无法处理这个插入程序包。您必须安装含有 Windows 安装服务新版本的 Windows Service Pack。
1638 已安装这个产品的另一个版本。这个版本的安装无法继续。要配置或删除这个产品的现有版本，请用"控制面板"上的"添加/删除程序"。
1639 无效的命令行参数。有关详细的命令行帮助，请查阅 Windows 安装服务的 SDK。
1640 在终端服务远程会话期间，只有管理员有添加、删除或配置服务器软件的权限。如果您要在服务器上安装或配置软件，请与网络管理员联系。
1641 要求的操作已成功结束。要使改动生效，必须重新启动系统。
1642 Windows 安装服务无法安装升级修补程序，因为被升级的程序可能会丢失或是升级修补程序可能更新此程序的一个不同版本。请确认要被升级的程序在您的计算机上且您的升级修补程序是正确的。
1700 串绑定无效。
1701 绑定句柄类型不正确。
1702 绑定句柄无效。
1703 不支持 RPC 协议序列。
1704 RPC 协议序列无效。
1705 字符串通用唯一标识 (UUID) 无效。
1706 终结点格式无效。
1707 网络地址无效。
1708 找不到终结点。
1709 超时值无效。
1710 找不到对象通用唯一标识(UUID)。
1711 对象通用唯一标识 (UUID)已注册。
1712 类型通用唯一标识(UUID)已注册。
1713 RPC 服务器已在侦听。
1714 未登记任何协议序列。
1715 RPC 服务器未在侦听。
1716 未知的管理器类型。
1717 未知的界面。
1718 没有任何链接。
1719 无任何协议顺序。
1720 无法创建终结点。
1721 资源不足，无法完成此操作。
1722 RPC 服务器不可用。
1723 RPC 服务器过忙以致无法完成此操作。
1724 网络选项无效。
1725 在此线程中，没有使用中的远程过程调用。
1726 远程过程调用失败。
1727 远程过程调用失败且未运行。
1728 远程过程调用(RPC)协议出错。
1730 RPC 服务器不支持传送语法。
1732 不支持通用唯一标识(UUID)类型。
1733 标记无效。
1734 数组边界无效。
1735 链接不包含项目名称。
1736 名称语法无效。
1737 不支持名称语法。
1739 没有可用来创建通用唯一标识 (UUID)的网络地址。
1740 终结点是一份备份。
1741 未知的验证类型。
1742 调用的最大个数太小。
1743 字符串太长。
1744 找不到 RPC 协议顺序。
1745 过程号超出范围。
1746 绑定不包含任何验证信息。
1747 未知的验证服务。
1748 未知的验证级别。
1749 安全上下文无效。
1750 未知的授权服务。
1751 项目无效。
1752 服务器终结点无法运行操作。
1753 终结点映射表中无更多的可用终结点。
1754 未导出任何界面。
1755 项目名称不完整。
1756 版本选项无效。
1757 没有其他成员。
1758 没有内容未导出。
1759 接口没有找到。
1760 项目已存在。
1761 找不到项目。
1762 无可用的名称服务。
1763 网络地址族无效。
1764 不支持请求的操作。
1765 无可用的安全上下文以允许模拟。
1766 远程过程调用(RPC)中发生内部错误。
1767 RPC 服务器试图以零除整数。
1768 RPC 服务器中发生地址错误。
1769 RPC 服务器上的浮点操作导至以零做除数。
1770 RPC 服务器上发生浮点下溢。
1771 RPC 服务器上发生浮点上溢。
1772 自动句柄绑定的可用 RPC 服务器列表已用完。
1773 无法打开字符翻译表文件。
1774 包含字符翻译表的文件少于512 字节。
1775 在远程过程调用时，将空的上下文句柄从客户传递到主机。
1777 在远程过程调用时，上下文句柄已更改。
1778 传递到远程过程调用的绑定句柄不相符。
1779 承接体无法获得远程过程调用句柄。
1780 传递空引用指针到承接体。
1781 列举值超出范围。
1782 字节计数太小。
1783 承接体接收到坏数据。
1784 提供给请求操作的用户缓冲区无效。
1785 磁盘媒体无法识别。可能未被格式化。
1786 工作站没有信任机密。
1787 服务器上的安全数据库没有此工作站信任关系的计算机帐户。
1788 主域和受信域间的信任关系失败。
1789 此工作站和主域间的信任关系失败。
1790 网络登录失败。
1791 此线程的远程过程调用已在进行中。
1792 试图登录，但是网络登录服务没有启动。
1793 用户帐户到期。
1794 转发程序已被占用且无法卸载。
1795 指定的打印机驱动程序已安装。
1796 指定的端口未知。
1797 未知的打印机驱动程序。
1798 未知的打印机处理器。
1799 指定的分隔页文件无效。
1800 指定的优先级无效。
1801 打印机名无效。
1802 打印机已存在。
1803 打印机命令无效。
1804 指定的数据类型无效。
1805 指定的环境无效。
1806 没有更多的绑定。
1807 所用帐户为域间信任帐户。请使用您的全局用户帐户或本地用户帐户来访问这台服务器。
1808 所用帐户是一个计算机帐户。使用您的全局用户帐户或本地用户帐户来访问此服务器。
1809 已使用的帐户为服务器信任帐户。使用您的全局用户帐户或本地用户帐户来访问此服务器。
1810 指定域的名称或安全标识(SID)与该域的信任信息不一致。
1811 服务器在使用中且无法卸载。
1812 指定的映像文件不包含资源区域。
1813 找不到映像文件中指定的资源类型。
1814 找不到映像文件中指定的资源名。
1815 找不到映像文件中指定的资源语言标识。
1816 配额不足，无法处理此命令。
1817 未登记任何界面。
1818 远程过程调用被取消。
1819 绑定句柄不包含所有需要的信息。
1820 在远程过程调用过程中通讯失败。
1821 不支持请求的验证级别。
1822 未登记任何主名称。
1823 指定的错误不是有效的 Windows RPC 错误码。
1824 已配置一个只在这部计算机上有效的 UUID。
1825 发生一个安全包特有的错误。
1826 线程未取消。
1827 无效的编码/解码句柄操作。
1828 序列化包装的版本不兼容。
1829 RPC 承接体的版本不兼容。
1830 RPC 管道对象无效或已损坏。
1831 试图在 RPC 管道物件上进行无效操作。
1832 不被支持的 RPC 管道版本。
1898 找不到该组成员。
1899 无法创建终结点映射表数据库项。
1900 对象通用唯一标识 (UUID) 为 nil UUID。
1901 指定的时间无效。
1902 指定的格式名称无效。
1903 指定的格式大小无效。
1904 指定的打印机句柄正等候在
1905 已删除指定的打印机。
1906 打印机的状态无效。
1907 在第一次登录之前，必须更改用户密码。
1908 找不到此域的域控制器。
1909 引用的帐户当前已锁定，且可能无法登录。
1910 没有发现指定的此对象导出者
1911 没有发现指定的对象。
1912 没有发现指定的对象解析器。
1913 一些待发数据仍停留在请求缓冲区内。
1914 无效的异步远程过程调用句柄。
1915 这个操作的异步 RPC 调用句柄不正确。
1916 RPC 管道对象已经关闭。
1917 在 RPC 调用完成之前全部的管道都已处理完成。
1918 没有其他可用的数据来自 RPC 管道。
1919 这个机器没有可用的站点名。
1920 系统无法访问此文件。
1921 系统无法辨识文件名。
1922 项目不是所要的类型。
1923 无法将所有对象的 UUID 导出到指定的项。
1924 无法将界面导出到指定的项。
1925 无法添加指定的配置文件项。
1926 无法添加指定的配置文件元素。
1927 无法删除指定的配置文件元素。
1928 无法添加组元素。
1929 无法删除组元素。  

2000 无效的像素格式。
2001 指定的驱动程序无效。
2002 窗口样式或类别属性对此操作无效。
2003 不支持请求的图元操作。
2004 不支持请求的变换操作。
2005 不支持请求的剪切操作。
2010 指定的颜色管理模块无效。
2011 制定的颜色文件配置无效。
2012 找不到指定的标识。
2013 找不到所需的标识。
2014 指定的标识已经存在。
2015 指定的颜色文件配置与任何设备都不相关。
2016 找不到该指定的颜色文件配置
2017 指定的颜色空间无效。
2018 图像颜色管理没有启动。
2019 在删除该颜色传输时有一个错误。
2020 该指定的颜色传输无效。
2021 该指定的变换与位图的颜色空间不匹配。
2022 该指定的命名颜色索引在配置文件中不存在。
2102 没有安装工作站驱动程序。
2103 无法定位服务器。
2104 发生内部错误，网络无法访问共享内存段。
2105 网络资源不足。
2106 工作站不支持这项操作。
2107 设备没有连接。
2108 网络连接已成功，但需要提示用户输入一个不同于原始指定的密码。
2114 没有启动服务器服务。
2115 队列空。
2116 设备或目录不存在。
2117 无法在重定向的资源上执行这项操作。
2118 名称已经共享。
2119 服务器当前无法提供所需的资源。
2121 额外要求的项目超过允许的上限。
2122 对等服务只支持两个同时操作的用户 。
2123 API 返回缓冲区太小。
2127 远程 API 错误。
2131 打开或读取配置文件时出错。
2136 发生一般网络错误。
2137 工作站服务的状态不一致。重新启动工作站服务之前，请先重新启动计算机。
2138 工作站服务没有启动。
2139 所需信息不可用。
2140 发生 Windows 2000 内部错误。
2141 服务器没有设置事务处理。
2142 远程服务器不支持请求的 API。
2143 事件名无效。
2144 网络上已经有此计算机名。请更名后重新启动。
2146 配置信息中找不到指定的组件。
2147 配置信息中找不到指定的参数。
2149 配置文件中有一个命令行太长。
2150 打印机不存在。
2151 打印作业不存在。
2152 打印机目标找不到。
2153 打印机目标已经存在。
2154 打印机队列已经存在。
2155 无法添加其它的打印机。
2156 无法添加其它的打印作业。
2157 无法添加其它的打印机目标。
2158 此打印机目标处于空闲中，不接受控制操作。
2159 此"打印机目标请求"包含无效的控制函数。
2160 打印处理程序没有响应。
2161 后台处理程序没有运行。
2162 打印目标当前的状况，无法执行这项操作。
2163 打印机队列当前的状况，无法执行这项操作。
2164 打印作业当前的状况，无法执行这项操作。
2165 无法为后台处理程序分配内存。
2166 设备驱动程序不存在。
2167 打印处理程序不支持这种数据类型。
2168 没有安装打印处理程序。
2180 锁定服务数据库。
2181 服务表已满。
2182 请求的服务已经启动。
2183 这项服务没有响应控制操作。
2184 服务仍未启动。
2185 服务名无效。
2186 服务没有响应控制功能。
2187 服务控制处于忙碌状态。
2188 配置文件包含无效的服务程序名。
2189 在当前的状况下无法控制服务。
2190 服务异常终止。
2191 这项服务无法接受请求的 "暂停" 或 "停止" 操作。
2192 服务控制"计划程序"在"计划表"中找不到服务名。
2193 无法读取服务控制计划程序管道。
2194 无法创建新服务的线程。
2200 此工作站已经登录到局域网。
2201 工作站没有登录到局域网。
2202 指定的用户名无效。
2203 密码参数无效。
2204 登录处理器没有添加消息别名。
2205 登录处理器没有添加消息别名。
2206 注销处理器没有删除消息别名。
2207 注销处理器没有删除消息别名。
2209 暂停网络登录。
2210 中心登录服务器发生冲突。
2211 服务器没有设置正确的用户路径。
2212 加载或运行登录脚本时出错。
2214 没有指定登录服务器，计算机的登录状态是单机操作。
2215 登录服务器找不到。
2216 此计算机已经有一个登录域。
2217 登录服务器无法验证登录。
2219 安全数据库找不到。
2220 组名找不到。
2221 用户名找不到。
2222 资源名找不到。
2223 组已经存在。
2224 帐户已经存在。
2225 资源使用权限清单已经存在。
2226 此操作只能在该域的主域控制器上执行。
2227 安全数据库没有启动。
2228 用户帐户数据库中的名称太多。
2229 磁盘 I/O 失败。
2230 已经超过每个资源 64 个项目的限制。
2231 不得删除带会话的用户。
2232 上层目录找不到。
2233 无法添加到安全数据库会话高速缓存段。
2234 这项操作不能在此特殊的组上执行。
2235 用户帐户数据库会话高速缓存没有记录此用户。
2236 用户已经属于此组。
2237 用户不属于此组。
2238 此用户帐户尚未定义。
2239 此用户帐户已过期。
2240 此用户不得从此工作站登录网络。
2241 这时候不允许用户登录网络。
2242 此用户的密码已经过期。
2243 此用户的密码无法更改。
2244 现在无法使用此密码。
2245 密码不满足密码策略的需要。检查最小密码长度、密码复杂性和密码历史的需求。
2246 此用户的密码最近才启用，现在不能更改。
2247 安全数据库已损坏。
2248 不需要更新此副本复制的网络/本地安全数据库。
2249 此副本复制的数据库已过时；请同步处理其中的数据。
2250 此网络连接不存在。
2251 此 asg_type 无效。
2252 此设备当前正在共享中。
2270 计算机名无法作为消息别名添加。网络上可能已经有此名称。
2271 信使服务已经启动。
2272 信使服务启动失败。
2273 网络上找不到此消息别名。
2274 此消息别名已经转发出去。
2275 已经添加了此消息别名，但是仍被转发。
2276 此消息别名已在本地存在。
2277 添加的消息别名已经超过数目上限。
2278 无法删除计算机名。
2279 消息无法转发回到同一个工作站。
2280 域消息处理器出错。
2281 消息已经发送出去，但是收件者已经暂停信使服务。
2282 消息已经发送出去，但尚未收到。
2283 消息别名当前正在使用中。请稍候片刻再试。
2284 信使服务尚未启动。
2285 该名称不在本地计算机上。
2286 网络上找不到转发的消息别名。
2287 远程通讯站的消息别名表已经满了。
2288 此别名的消息当前没有在转发中。
2289 广播的消息被截断。
2294 设备名无效。
2295 写入出错。
2297 网络上的消息别名重复。
2298 此消息别名会在稍后删除。
2299 没有从所有的网络删除消息别名。
2300 这项操作无法在使用多种网络的计算机上执行。
2310 此共享的资源不存在。
2311 设备没有共享。
2312 带此计算机名的会话不存在。
2314 没有用此识别号打开的文件。
2315 执行远程管理命令失败。
2316 打开远程临时文件失败。
2317 从远程管理命令返回的数据已经被截断成 64K。
2318 此设备无法同时共享为后台处理资源和非后台处理资源。
2319 服务器清单中的信息可能不正确
2320 计算机在此域未处于活动状态
2321 在删除共享之前，需要将该共享从分布式文件系统中删除。
2331 无法在此设备执行这项操作
2332 此设备无法共享。
2333 此设备未打开。
2334 此设备名清单无效。
2335 队列优先级无效。
2337 没有任何共享的通讯设备。
2338 指定的队列不存在。
2340 此设备清单无效。
2341 请求的设备无效。
2342 后台处理程序正在使用此设备。
2343 此设备已经被当成通讯设备来使用。
2351 此计算机名无效。
2354 指定的字符串及前缀太长。
2356 此路径组成部分无效。
2357 无法判断输入类型。
2362 类型缓冲区不够大。
2370 配置文件不得超过 64K。
2371 初始偏移量越界。
2372 系统无法删除当前到网络资源的连接。
2373 系统无法分析此文件中的命令行。
2374 加载配置文件时出错。\
2375 保存配置文件时出错，只部份地保存了配置文件。
2378 此日志文件在前后两次读取之间已经发生变化。
2380 资源路径不可以是目录。
2381 资源路径无效。
2382 目标路径无效。
2383 源路径及目标路径分属不同的服务器。
2385 请求的 Run 服务器现在暂停。
2389 与 Run 服务器通讯时出错。
2391 启动后台处理时出错。
2392 找不到您连接的共享资源。
2400 LAN 适配器号码无效。
2401 此网络连接有文件打开或请求挂起。
2402 使用中的连接仍存在。
2403 此共享名或密码无效。
2404 设备正由活动进程使用，无法断开。
2405 此驱动器号已在本地使用。
2430 指定的客户已经在指定的事件注册。
2431 警报表已满。
2432 发出的警报名称无效或不存在。
2433 警报接收者无效。
2434 用户的登录时间长短不再合法。所以已经删除用户与该服务器的会话。
2440 日志文件中没有请求的记录号。
2450 用户帐户数据库没有正确配置。
2451 当 Netlogon 服务正在运行时，不允许执行这项操作。
2452 这项操作无法在最后的管理帐户上执行。
2453 找不到此域的域控制器。
2454 无法设置此用户的登录信息。
2455 Netlogon 服务尚未启动。
2456 无法添加到用户帐户数据库。
2457 此服务器的时钟与主域控制器的时钟不一致。
2458 检测到密码不匹配。
2460 服务器识别码没有指定有效的服务器。
2461 会话标识没有指定有效的会话。
2462 连接识别码没有指定有效的连接。
2463 可用服务器表中无法再加上其它项。
2464 服务器已经到了支持的会话数目上限。
2465 服务器已经到了支持的连接数目上限。
2466 服务器打开的文件到了上限，无法打开更多文件。
2467 这台服务器没有登记替换的服务器。
2470 请用低级的 API (远程管理协议)。
2480 UPS 服务无法访问 UPS 驱动程序。
2481 UPS 服务设置错误。
2482 UPS 服务无法访问指定通讯端口 (Comm Port)。
2483 UPS 显示线路中断或电池不足，服务没有启动。
2484 UPS 服务无法执行系统关机的操作。
2500 下面的程序返回一个 MS-DOS 错误码:
2501 下面的程序需要更多的内存:
2502 下面程序调用了不支持的 MS-DOS 函数:
2503 工作站无法启动。
2504 下面的文件已损坏。
2505 启动块定义文件中没有指定引导程序。
2506 NetBIOS 返回错误: NCB 及 SMB 数据转储。
2507 磁盘 I/O 错误。
2508 无法替换映像参数。
2509 跨越磁盘扇区范围的映像参数太多。
2510 不是从用 /S 格式化的 MS-DOS软盘产生的映像。
2511 稍后会从远程重新启动。
2512 无法调用远程启动服务器。
2513 无法连接到远程启动服务器。
2514 无法打开远程启动服务器上的映像文件。
2515 正在连接到远程启动服务器...
2516 正在连接到远程启动服务器...
2517 远程启动服务已经停止，请检测错误记录文件，查明出错的原因。
2518 远程启动失败，请检查错误日志文件，查明出错的原因。
2519 不允许第二个远程启动 (Remoteboot) 资源连接。
2550 浏览服务设置成 MaintainServerList=No。
2610 因为没有网卡与这项服务一起启动，所以无法启动服务。
2611 因为注册表中的启动信息不正确，所以无法启动服务。
2612 无法启动服务，原因是它的数据库找不到或损坏。
2613 因为找不到 RPLFILES 共享的资源，所以无法启动服务。
2614 因为找不到 RPLUSER 组，所以无法启动服务。
2615 无法枚举服务记录。
2616 工作站记录信息已损坏。
2617 工作站记录找不到。
2618 其它的工作站正在使用此工作站名。
2619 配置文件记录已损坏。
2620 配置文件记录找不到。
2621 其它的配置文件正在使用此名称。
2622 有很多工作站正在使用此配置文件。
2623 配置记录已损坏。
2624 配置记录找不到。
2625 适配器识别记录已损坏。
2626 内部服务出错。
2627 供应商识别记录已损坏。
2628 启动块记录已损坏。
2629 找不到此工作站的用户帐户记录。
2630 RPLUSER 本地组找不到。
2631 找不到启动块记录。
2632 所选的配置文件与此工作站不兼容。
2633 其它的工作站正在使用所选的网卡。
2634 有些配置文件正在使用此配置。
2635 有数个工作站、配置文件或配置正在使用此启动块。
2636 服务无法制作远程启动数据库的备份。
2637 找不到适配器记录。
2638 找不到供应商记录。
2639 其它供应商记录正在使用此供应商名称。
2640 其它的启动区记录正在使用启动名称或供应商识别记录。
2641 其它的配置正在使用此配置名称。
2660 由 Dfs 服务所维护的内部数据库已损坏
2661 内部数据库中的一条记录已 损坏
2662 输入项路径与卷路径不匹配
2663 给定卷名已存在
2664 指定的服务器共享已在 Dfs 中共享
2665 所显示的服务器共享不支持所显示的 Dfs 卷
2666 此操作在非叶卷上无效。
2667 此操作在叶卷上无效。
2668 此操作不明确，因为该卷存在多服务器。
2669 无法创建连接点
2670 该服务器不是 Dfs 可识别的
2671 指定的重命名目标路径无效。
2672 指定 Dfs 卷脱线
2673 指定的服务器不为此卷服务
2674 检测到 Dfs 名中的环路
2675 在基于服务器的 Dfs 上不支持该操作
2676 这个卷已经受该指定服务器共享支持
2677 无法删除这个卷的上一个服务器共享支持
2678 Inter-Dfs 卷不支持该操作
2679 Dfs 服务的内部状态已经变得不一致
2680 Dfs 服务已经安装在指定的服务器上
2681 被协调的 Dfs 数据是一样的
2682 无法删除 Dfs 根目录卷 - 如需要请卸载 Dfs
2683 该共享的子目录或父目录已经存在在一个 Dfs 中
2690 Dfs 内部错误
2691 这台机器已经加入域 。
2692 这个机器目前未加入域。
2693 这台机器是域控制器，而且无法从域中退出。
2694 目标域控制器不支持在 OU 中创建的机器帐户。
2695 指定的工作组名无效
2696 指定的计算机名与域控制器上使用的默认语言不兼容。
2697 找不到指定的计算机帐户。
2999 这是 NERR 范围内的最后一个错误。

3000 指定了未知的打余视器。
3001 指定的打印机驱动程序当前正在使用。
3002 找不到缓冲文件。
3003 未发送 StartDocPrinter 调用。
3004 未发送 AddJob 调用。
3005 指定的打印处理器已经安装。
3006 指定的打余视器已经安装。
3007 该指定的打余视器不具备所要求的功能。　
3008 该指定的打余视器正在使用中。
3009 当打印机有作业排成队列时此操作请求是不允许的。
3010 请求的操作成功。直到重新启动系统前更改将不会生效。
3011 请求的操作成功。直到重新启动服务前更改将不会生效。
3012 找不到打印机。
3023 用户指定的关机命令文件，它的配置有问题。不过 UPS 服务已经启动。
3029 因为用户帐户数据库 (NET.ACC) 找不到或损坏，而且也没有可用的备份数据库，所以不能启动本地安全机制。系统不安全！
3037 @I *登录小时数 
3039 已经超过一个目录中文件的副本复制的限制。
3040 已经超过副本复制的目录树深度限制。
3046 无法登录。用户当前已经登录，同时参数 TRYUSER设置为 NO。
3052 命令行或配置文件中没有提供必要的参数。
3054 无法满足资源的请求。
3055 系统配置有问题。
3056 系统出错。
3057 发生内部一致性的错误。
3058 配置文件或命令行的选项不明确。
3059 配置文件或命令行的参数重复。
3060 服务没有响应控制，DosKillProc 函数已经停止服务。
3061 运行服务程序时出错。
3062 无法启动次级服务。
3064 文件有问题。
3070 内存
3071 磁盘空间
3072 线程
3073 过程
3074 安全性失败。 
3075 LAN Manager 根目录不正确或找不到。
3076 未安装网络软件。
3077 服务器未启动。
3078 服务器无法访问用户帐户数据库 (NET.ACC)。
3079 LANMAN 树中安装的文件不兼容。
3080 LANMAN\LOGS 目录无效。
3081 指定的域无法使用。
3082 另一计算机正将此计算机名当作消息别名使用。
3083 宣布服务器名失败。
3084 用户帐户数据库没有正确配置。
3085 服务器没有运行用户级安全功能。
3087 工作站设置不正确。
3088 查看您的错误日志文件以了解详细信息。
3089 无法写入此文件。
3090 ADDPAK 文件损坏。请删除 LANMAN\NETPROG\ADDPAK.SER后重新应用所有的 ADDPAK。
3091 因为没有运行 CACHE.EXE，所以无法启动 LM386 服务器。
3092 安全数据库中找不到这台计算机的帐户。
3093 这台计算机不是 SERVERS 组的成员。
3094 SERVERS 组没有在本地安全数据库中。
3095 此 Windows NT 计算机被设置为某个组的成员，并不是域的成员。此种配置下不需要运行 Netlogon 服务。
3096 找不到此域的 Windows NT 域控制器。
3098 服务无法与主域控制器进行验证。
3099 安全数据库文件创建日期或序号有问题。
3100 因为网络软件出错，所以无法执行操作。
3102 这项服务无法长期锁定网络控制块 (NCB) 的段。错误码就是相关数据。
3103 这项服务无法解除网络控制块 (NCB) 段的长期锁定。错误码就是相关数据。
3106 收到意外的网络控制块 (NCB)。NCB 就是相关数据。
3107 网络没有启动。
3108 NETWKSTA.SYS 的 DosDevIoctl 或 DosFsCtl 调用失败。显示的数据为以下格式:DWORD 值代表调用 Ioctl 或 FsCtl 的 CS:IP WORD 错误代码WORD Ioctl 或 FsCtl 号
3111 发生意外的 NetBIOS 错误。错误码就是相关数据。
3112 收到的服务器消息块 (SMB) 无效。SMB 就是相关数据。
3114 因为缓冲区溢出，所以错误日志文件中部份的项目丢失。
3120 控制网络缓冲区以外资源用量的初始化参数被设置大小，因此需要的内存太多。
3121 服务器无法增加内存段的大小。
3124 服务器启动失败。三个 chdev参数必须同时为零或者同时不为零。
3129 服务器无法更新 AT 计划文件。文件损坏。
3130 服务器调用 NetMakeLMFileName 时出错。错误码就是相关数据。
3132 无法长期锁定服务器缓冲区。请检查交换磁盘的可用空间，然后重新启动系统以启动服务器。
3140 因为多次连续出现网络控制块 (NCB) 错误，所以停止服务。最后一个坏的 NCB 以原始数据形式出现。
3141 因为消息服务器共享的数据段被锁住，所以消息服务器已经停止运行。
3151 因为 VIO 调用出错，所以无法弹出显示消息。错误码就是相关数据。
3152 收到的服务器消息块 (SMB) 无效。SMB 就是相关数据。
3160 工作站信息段大于 64K。大小如下(以 DWORD 值的格式):
3161 工作站无法取得计算机的名称号码。
3162 工作站无法初始化 Async NetBIOS 线程。错误码就是相关数据。
3163 工作站无法打开最前面的共享段。错误码就是相关数据。
3164 工作站主机表已满。
3165 收到的邮筒服务器消息块 (SMB) 有问题，SMB 就是相关数据。
3166 工作站启动用户帐户数据库时出错。错误码就是相关数据。
3167 工作站响应 SSI 重新验证请求时出错。函数码及错误码就是相关数据。
3174 服务器无法读取 AT 计划文件。
3175 服务器发现错误的 AT 计划记录。
3176 服务器找不到 AT 计划文件，所以创建一个计划文件。
3185 因为用户帐户数据库 (NET.ACC) 找不到或损坏，而且也没有可用的备份数据库，所以不能启动本地安全机制。系统不安全！
3204 服务器无法创建线程。CONFIG.SYS 中的 THREADS 参数必须加大。
3213 已经超过一个目录中文件的副本复制的限制。
3214 已经超过副本复制的目录树深度限制。
3215 邮筒中收到的消息无法识别。
3217 无法登录。用户当前已经登录，同时参数 TRYUSER设置为 NO。
3230 检测到服务器的电源中断。
3231 UPS 服务已经关掉服务器。
3232 UPS 服务没有完成执行用户指定的关机命令文件。
3233 无法打开 UPS 驱动程序。错误码就是相关数据。
3234 电源已经恢复。
3235 用户指定的关机命令文件有问题。
3256 该项服务的动态链接库发生无法修复的错误。
3257 系统返回意外的错误码。错误码就是相关数据。
3258 容错错误日志文件 - LANROOT\LOGS\FT.LOG超过 64K。
3259 容错错误日志文件 - LANROOT\LOGS\FT.LOG，在被打开时就已设置更新进度位，这表示上次使用错误日志时，系统死机。
3301 Remote IPC 
3302 Remote Admin 
3303 Logon server share 
3304 网络出错。 
3400 内存不足，无法启动工作站服务。
3401 读取 LAMAN.INI 文件的 NETWORKS 项目出错。
3404 LAMAN.INI 文件中的 NETWORKS 项目太多。
3408 程序无法用在此操作系统。
3409 已经安装转发程序。
3411 安装 NETWKSTA.SYS 时出错。请按 ENTER 继续。
3412 求解程序链接问题。
3419 您已经打开文件或设备，强制断开会造成数据丢失。
3420 内部用的默认共享 
3421 信使服务 
3500 命令成功完成。
3501 使用的选项无效。
3503 命令包含无效的参数个数。
3504 命令运行完毕，但发生一个或多个错误。
3505 使用的选项数值不正确。
3510 命令使用了冲突的选项。
3512 软件需要新版的操作系统。
3513 数据多于 Windows 2000 所能够返回的。
3515 此命令只能用在 Windows 2000 域控制器。
3516 这个指令不能用于一个 Windows 2000 域控制器。
3520 已经启动以下 Windows 2000 服务: 
3525 停止工作站服务也会同时停止服务器服务 。
3526 工作站有打开的文件。
3533 服务正在启动或停止中，请稍候片刻后再试一次。
3534 服务没有报告任何错误。
3535 正在控制设备时出错。
3660 这些工作站在这台服务器上有会话:
3661 这些工作站有会话打开了此台服务器上的文件:
3666 消息别名已经转发出去。
3670 您有以下的远程连接:
3671 继续运行会取消连接。
3676 会记录新的网络连接。
3677 不记录新的网络连接。
3678 保存配置文件时出错，原先记录的网络连接状态没有更改。
3679 读取配置文件时出错。
3682 没有启动任何网络服务。
3683 清单是空的。
3689 工作站服务已经在运行中，Windows 2000 会忽略工作站的命令选项。
3694 在打印作业正在后台处理到队列时，无法删除共享的队列。
3710 打开帮助文件时出错。
3711 帮助文件是空的。
3712 帮助文件已经损坏。
3714 这是专为那些安装旧版软件的系统提供的操作。
3716 设备类型未知。
3717 日志文件已经损坏。
3718 程序文件名后必须以 .EXE 结束。
3719 找不到匹配的共享，因此没有删除。
3720 用户记录中的 "单位/星期" 的值不正确。
3725 删除共享时出错。
3726 用户名无效。
3727 密码无效。
3728 密码不匹配。
3729 永久连接没有完全还原。
3730 计算机名或域名错误。
3732 无法设置该资源的默认权限。
3734 没有输入正确的密码。
3735 没有输入正确的名称。
3736 该资源无法共享。
3737 权限字符串包含无效的权限。
3738 您只能在打印机或通讯设备上执行这项操作。
3743 服务器没有设置远程管理的功能。
3752 这台服务器上没有用户的会话。
3756 响应无效。
3757 没有提供有效的响应。
3758 提供的目标清单与打印机队列目标清单不匹配。
3761 指定的时间范围中结束的时间比开始的时间早。
3764 提供的时间不是整点。
3765 12 与 24 小时格式不能混用。
3767 提供的日期格式无效。
3768 提供的日期范围无效。
3769 提供的时间范围无效。
3770 NET USER 的参数无效。请检查最短的密码长度和/或提供参数。
3771 ENABLESCRIPT 的值必须是 YES。
3773 提供的国家(地区)代码无效。
3774 用户已经创建成功，但是无法添加到USERS 本地组中。
3775 提供的用户上下文无效。
3777 文件发送功能已不再支持。
3778 您可能没有指定 ADMIN$ 及 IPC$ 共享的路径。
3784 只有磁盘共享可以标记为可以缓存。
3802 此计划日期无效。
3803 LANMAN 根目录无法使用。
3804 SCHED.LOG 文件无法打开。
3805 服务器服务尚未启动。
3806 AT 作业标识不存在。
3807 AT 计划文件已损坏。
3808 因为 AT 计划文件发生问题，所以无法运行删除操作。
3809 命令行不得超过 259 个字符。
3810 因为磁盘已满，所以 AT 计划文件无法更新。
3812 AT 计划文件无效。请删除此文件并创建新的文件。
3813 AT 计划文件已经删除。
3814  -此命令的语法是:AT [id] [/DELETE]AT 时间 [/EVERY:日期 | /NEXT:日期] 命令AT 命令会在以后的指定日期及时间，安排程序在服务器上运行。它也会显示安排运行的程序及命令的清单。您可以将日期指定为M、T、W、Th、F、Sa、Su 或 1-31 的格式。您可以将时间指定为HH:MM的二十四小时格式。
3815 AT 命令已经超时。请稍后再试一次。
3816 用户帐户的密码使用最短期限不得大于密码最长使用期限。
3817 指定的数值与安装下层软件的服务器不兼容。请指定较小的值。
3901 ****
3902 **** 意外到达消息的结尾 ****
3905 请按 ESC 退出
3906 ...
3912 找不到时间服务器。
3915 无法判断用户的主目录。
3916 没有指定用户的主目录。
3920 已经没有可用的驱动器号。
3936 这台计算机目前没有配置成使用一个指定的 SNTP 服务器。
3953 语法错误。
3960 指定的文件号码无效。
3961 指定的打印作业号码无效。
3963 指定的用户或组帐户找不到。
3965 已添加用户，但 NetWare 的文件和打印服务无法启用。
3966 没有安装 NetWare 的文件和打印服务。
3967 无法为 NetWare 的文件和打印服务设置用户属性。
3969 NetWare 兼容登录 

4000 WINS 在处理命令时遇到错误。
4001 本地的 WINS 不能删除。
4002 文件导入操作失败。
4003 备份操作失败。是否先前已作过完整备份?
4004 备份操作失败。请检查您备份数据库的目录。
4005 WINS 数据库中没有这个名称。
4006 不允许复制一个尚未配置的伙伴。
4100 DHCP 客户获得一个在网上已被使用的 IP 地址。 直到 DHCP 客户可以获得新的地址前，本地接口将被禁用。
4200 无法识别传来的 GUID 是否为有效的 WMI 数据提供程序。
4201 无法识别传来的实例名是否为有效的 WMI 数据提供程序。
4202 无法识别传来的数据项目标识符是否为有效的 WMI 数据提供程序。
4203 无法完成 WMI 请求，应该重试一次。
4204 找不到 WMI 数据提供程序。
4205 WMI 数据提供程序引用到一个未注册的实例组。
4206 WMI 数据块或事件通知已启用。
4207 WMI 数据块不再可用。
4208 WMI 数据服务无法使用。
4209 WMI 数据提供程序无法完成要求。
4210 WMI MOF 信息无效。
4211 WMI 注册信息无效。
4212 WMI 数据块或事件通知已禁用。
4213 WMI 数据项目或数据块为只读。
4214 WMI 数据项目或数据块不能更改。
4300 媒体标识符没有表示一个有效的媒体。
4301 库标识符没有表示一个有效的库。
4302 媒体缓冲池标识符没有表示一个有效的媒体缓冲池。
4303 驱动器和媒体不兼容或位于不同的库中。
4304 媒体目前在脱机库中，您必须联机才能运行这个操作。
4305 操作无法在脱机库中运行。
4306 库、驱动器或媒体缓冲池是空的。
4307 库、磁盘或媒体缓冲池必须是空的，才能运行这个操作。
4308 在这个媒体缓冲池或库中目前没有可用的媒体。
4309 这个操作所需的资源已禁用。
4310 媒体标识符没有表示一个有效的清洗器。
4311 无法清洗驱动器或不支持清洗。
4312 对象标识符没有表示一个有效的对象。
4313 无法读取或写入数据库。
4314 数据库已满。
4315 媒体与设备或媒体缓冲池不兼容。
4316 这个操作所需的资源不存在。
4317 操作标识符不正确。
4318 媒体未被安装，或未就绪。
4319 设备未就绪。
4320 操作员或系统管理员拒绝了请求。
4321 驱动器标识符不代表一个有效的驱动器。
4322 程序库已满。没有可使用的插槽。
4323 传输程序不能访问媒体。
4324 无法将媒体加载到驱动器中。
4325 无法检索有关驱动器的状态。
4326 无法检索有关插槽的状态。
4327 无法检索传输的状态。
4328 因为传输已在使用中，所以无法使用。
4329 无法打开或关闭弹入/弹出端口。
4330 因为媒体在驱动器中，无法将其弹出。
4331 清洗器插槽已被保留。
4332 没有保留清洗器插槽。
4333 清洗器墨盒已进行了最大次数的驱动器清洗。
4334 意外媒体标识号。
4335 在这个组或源中最后剩下的项目不能被删除。
4336 提供的消息超过了这个参数所允许的最大尺寸。
4337 该卷含有系统和页面文件。
4338 由于库中至少有一个驱动器可以支持该媒体类型，不能从库中删除媒体类型。
4339 由于没有可以使用的已被启动的驱动器，无法将该脱机媒体装入这个系统。
4340 (Y/N) [Y]
4341 (Y/N) [N]
4342 错误
4343 OK
4344 Y
4345 N
4346 任何
4347 A
4348 P
4349 (找不到)
4350 远程存储服务无法撤回文件。
4351 远程存储服务此时不可操作。
4352 远程存储服务遇到一个媒体错误。
4354 请键入密码: 
4358 请键入用户的密码: 
4359 请键入共享资源的密码: 
4360 请键入您的密码: 
4361 请再键入一次密码以便确认: 
4362 请键入用户的旧密码: 
4363 请键入用户的新密码: 
4364 请键入您的新密码: 
4365 请键入复制器服务密码: 
4368 请键入您的用户名: 
4372 打印作业详细信息
4378 控制下列正在运行的服务:
4379 统计数据可用于正在运行的下列服务:
4381 此命令的语法是:
4382 此命令的选项是:
4383 请键入主域控制器的名称: 
4385 Sunday
4386 Monday
4387 Tuesday
4388 Wednesday
4389 Thursday
4390 此文件或目录不是一个重解析点。
4391 重解析点的属性不能被设置，因为它与已有的属性冲突。
4392 在重解析点缓冲区中的数据无效。
4393 在重解析点缓冲区中的标签无效。
4394 请求中指定的标签和重解析点中的不匹配。
4395 W
4396 Th
4397 F
4398 S
4399 Sa
4401 组名
4402 注释
4403 成员
4406 别名
4407 注释
4408 成员
4411 用户名
4412 全名
4413 注释
4414 用户的注释
4415 参数
4416 国家(地区)代码
4417 权限等级
4418 操作员权限
4419 帐户启用
4420 帐户到期
4421 上次设置密码
4422 密码到期
4423 密码可更改
4424 允许的工作站
4425 磁盘空间上限
4426 无限制
4427 本地组会员
4428 域控制器
4429 登录脚本
4430 上次登录
4431 全局组成员
4432 可允许的登录小时数
4433 全部
4434 无
4436 主目录
4437 需要密码
4438 用户可以更改密码
4439 用户配置文件
4440 已锁定
4450 计算机名
4451 用户名
4452 软件版本
4453 工作站活动在
4454 Windows NT 根目录
4455 工作站域
4456 登录域
4457 其它域
4458 COM 打开超时 (秒)
4459 COM 发送计数 (字节)
4460 COM 发送超时 (毫秒)
4461 DOS 会话打印超时 (秒)
4462 错误日志文件大小上限 (K)
4463 高速缓存上限 (K)
4464 网络缓冲区数
4465 字符缓冲区数
4466 域缓冲区大小
4467 字符缓冲区大小
4468 计算机全名
4469 工作站域 DNS 名称
4470 Windows 2000
4481 服务器名称
4482 服务器注释
4483 发送管理警报到
4484 软件版本
4485 对等服务器
4486 Windows NT
4487 服务器等级
4488 Windows NT Server
4489 服务器正运行于
4492 服务器已隐藏
4500 零备份存储在这个卷上不可用。
4506 登录的用户数量上限
4507 同时可并存的管理员数量上限
4508 资源共享数量上限
4509 资源连接数量上限
4510 服务器打开的文件数量上限
4511 每个会话打开的文件数量上限
4512 文件锁定数量上限
4520 空闲的会话时间 (分)
4526 共享等级
4527 用户等级
4530 未限制的服务器
4570 强制用户在时间到期之后多久必须注销?:
4571 多少次密码不正确后锁住帐户?:
4572 密码最短使用期限 (天):
4573 密码最长使用期限 (天):
4574 密码长度下限:
4575 保持的密码历史记录长度:
4576 计算机角色:
4577 工作站域的主域控制器:
4578 锁定阈值:
4579 锁定持续时间(分):
4580 锁定观测窗口(分):
4600 统计开始于
4601 接受的会话
4602 会话超时
4603 会话出错
4604 发送的 KB
4605 接收的 KB
4606 平均响应时间 (毫秒)
4607 网络错误
4608 访问的文件
4609 后台处理的打印作业
4610 系统出错
4611 密码违规
4612 权限违规
4613 访问的通讯设备
4614 会话已启动
4615 重新连接的会话
4616 会话启动失败
4617 断开的会话
4618 网络 I/O 执行
4619 文件及管道被访问
4620 时间缓冲区耗尽
4621 大缓冲区
4622 请求缓冲区
4626 已做连接
4627 连接失败
4630 接收的字节数
4631 接收的服务器消息块 (SMB)
4632 传输的字节数
4633 传输的服务器消息块 (SMB)
4634 读取操作
4635 写入操作
4636 拒绝原始读取
4637 拒绝原始写入
4638 网络错误
4639 已做连接
4640 重新连接
4641 服务器断开
4642 会话已启动
4643 会话挂起
4644 失败的会话
4645 操作失败
4646 使用计数
4647 使用计数失败
4655 消息名称转发已经取消。
4661 密码已经更改成功。
4664 消息已经发给网络上所有的用户。
4666 消息已经送到此服务器上的所有用户。
4696 Windows NT Server
4697 Windows NT Workstation
4698 MS-DOS 增强型工作站
4700 服务器名称 注释
4701 资源共享名 类型 用途 注释
4702 (UNC)
4703 ...
4704 Domain
4706 其它可用的网络:
4710 Disk
4711 Print
4712 Comm
4713 IPC
4714 状态 本地 远程 网络
4715 OK
4716 休止
4717 已暂停
4718 断开
4719 错误
4720 正在连接
4721 正在重新连接
4722 状态
4723 本地名称
4724 远程名称
4725 资源类型
4726 # 打开
4727 # 连接
4728 不可用
4730 共享名 资源 注释
4731 共享名
4732 资源
4733 后台处理
4734 权限
4735 最多用户
4736 无限制
4737 用户
4740 识别码 路径 用户名 # 锁定
4741 文件识别码
4742 锁定
4743 权限
4750 计算机 用户名 客户类型 打开空闲时间
4751 计算机
4752 会话时间
4753 空闲时间
4754 资源共享名 类型 # 打开
4755 客户类型
4756 来宾登录
4770 脱机缓存被启用:手动恢复
4771 脱机缓存被启用:自动恢复
4772 脱机缓存被启用:用户之间没有共享
4773 脱机缓存被停用
4774 自动
4775 手动
4800 名称
4801 转发到
4802 已经从下列位置转发给您
4803 这台服务器的用户
4804 用户已经按 Ctrl+Break 中断网络发送。
4810 名称 作业编号 大小 状态
4811 作业
4812 打印
4813 名称
4814 作业 #
4815 大小
4816 状态
4817 分隔文件
4818 注释
4819 优先级
4820 打印后于
4821 打印直到
4822 打印处理程序
4823 附加信息
4824 参数
4825 打印设备
4826 打印机活动中
4827 打印机搁置
4828 打印机出错
4829 正在删除打印机
4830 打印机状态未知
4841 作业 #
4842 正在提交用户
4843 通知
4844 作业数据类型
4845 作业参数
4846 正在等候
4847 搁置于队列
4848 正在后台处理
4849 已暂停
4850 脱机
4851 错误
4852 缺纸
4853 需要干预
4854 正在打印
4855 on 
4862 驱动程序
4930 用户名 类型 日期
4931 锁定
4932 服务
4933 服务器
4934 服务器已启动
4935 服务器已暂停
4936 服务器已继续操作
4937 服务器已停止
4938 会话
4939 登录来宾
4940 登录用户
4941 登录管理员
4942 正常注销
4943 登录
4944 注销错误
4945 注销自动断开
4946 注销管理员断开
4947 注销受登录限制
4948 服务
4957 帐户
4964 已修改帐户系统设置
4965 登录限制
4966 超过限制: 未知
4967 超过限制: 登录时间
4968 超过限制: 帐户过期
4969 超过限制: 工作站识别码无效
4970 超过限制: 帐户停用
4971 超过限制: 帐户已删除
4972 资源
4978 密码不正确
4979 需要管理员特权
4980 访问
4984 拒绝访问
4985 未知
4986 其它
4987 持续时间:
4988 持续时间: 无效
4989 持续时间: 1 秒以下
4990 (无)
4994 访问结束
4995 登录到网络
4996 拒绝登录
4997 程序 消息 时间
4999 管理员已解除帐户的锁定状态 

5000 注销网络
5001 因为其它资源需要它，不能将群集资源移到另一个组。
5002 找不到此群集资源的依存。
5003 因为已经处于依存状态，此群集资源不能依存于指定的资源。
5004 此群集资源未联机。
5005 此操作没有可用的群集节点。
5006 没有群集资源。
5007 找不到群集资源。
5008 正在关闭群集。
5009 因为联机，群集节点无法从群集中脱离。
5010 对象已存在。
5011 此对象已在列表中。
5012 新请求没有可用的群集组。
5013 找不到群集组。
5014 因为群集组未联机，此操作不能完成。
5015 群集节点不是此资源的所有者。
5016 群集节点不是此资源的所有者。
5017 群集资源不能在指定的资源监视器中创建。
5018 群集资源不能通过资源监视器来联机。
5019 因为群集资源联机，此操作不能完成。
5020 由于是仲裁资源，群集资源不能被删除或脱机。
5021 由于没有能力成为仲裁资源，此群集不能使指定资源成为仲裁资源。
5022 群集软件正关闭。
5023 组或资源的状态不是执行请求操作的正确状态。
5024 属性已被存储，但在下次资源联机前，不是所有的修改将生效。
5025 由于不属于共享存储类别，群集不能使指定资源成为仲裁资源。
5026 由于是内核资源，无法删除群集资源。
5027 仲裁资源联机失败。
5028 无法成功创建或装入仲裁日志。
5029 群集日志损坏。
5030 由于该日志已超出最大限量，无法将记录写入群集日志。
5031 群集日志已超出最大限量。
5032 群集日志没有发现检查点记录。
5033 不满足日志所需的最小磁盘空间。
5034 群集节点未能控制仲裁资源，因为它被另一个活动节点拥有。
5035 这个操作的群集网络无效。
5036 此操作没有可用的群集节点。
5037 所有群集节点都必须运行才能执行这个操作。
5038 群集资源失败。
5039 该群集节点无效。
5040 该群集节点已经存在。
5041 一个节点正在加入该群集。
5042 找不到群集节点。
5043 找不到群集本地节点信息。
5044 群集网络已经存在。
5045 找不到群集网络。
5046 群集网络界面已经存在。
5047 找不到群集网络界面。
5048 群集请求在这个对象中无效。
5049 群集网络提供程序无效。
5050 群集节点坏了。
5051 无法连接到群集节点。
5052 该群集节点不是群集的一个成员。
5053 群集加入操作正在进行中。
5054 该群集网络无效。
5055 Mar
5056 该群集节点可以使用。
5057 该群集 IP 地址已在使用中。
5058 该群集节点没有中止。
5059 没有有效的群集安全上下文。
5060 该群集网络不是为内部群集通讯配置的。
5061 群集节点已经开始。
5062 群集节点已经坏了。
5063 群集网络已经联机。
5064 群集网络已经脱机。
5065 群集节点已经是该群集的成员。
5066 该群集网络是唯一个为两个或更多活动群集节点进行内部群集通讯的配置。不能从网络上删除内部通讯能力。
5067 一个或更多的群集资源依靠网络来向客户提供服务。不能从网络上删除客户访问能力。
5068 该操作不能在群集资源上作为仲裁资源执行。您不能将仲裁资源脱机或修改它的所有者名单。
5069 该群集仲裁资源不允许有任何依存关系。
5070 该群集节点暂停。
5071 群集资源不能联机。所有者节点不能在这个资源上运行。
5072 群集节点没有准备好，不能执行所请求的操作。
5073 群集节点正在关闭。
5074 放弃群集节点加入操作。
5075 由于加入节点和支持者之间的软件版本不兼容，该群集加入操作失败。
5076 由于该群集已经到达其所能监督的资源限制，不能创建这个资源。
5077 系统配置在群集加入或形成操作时已更改。放弃加入或形成操作。
5078 找不到指定的资源种类。
5079 指定的节点不支持这种资源，这也许是由于版本不一致或是由于在这个节点上没有资源 DLL。
5080 该资源 DLL 不支持指定的资源名称。这可能是由于一个提供给源 DLL 名称是错误的(或经过更改的)。
5081 不能在 RPC 服务器上注册任何身份验证包。
5082 由于组的所有者不在组的首选列表中，不能将组联机。要改变组的所有者节点，请移动组。
5083 群集数据库的系列号已改变，或者与锁定程序节点不相容，因此加入操作没有成功。如果在加入操作期间群集数据库有任何改动，这都可能发生。
5084 资源在其当前状态下，资源监视器不允许执行失败操作。资源处于挂起状态时，这都可能发生。
5085 非锁定程序代码收到一个为全局更新保留锁定的请求。
5086 群集服务找不到仲裁磁盘。
5087 已备份的群集数据库可能已损坏。
5088 DFS 根目录已在这个群集节点中。
5089 由于与另一个现有属性冲突，未能修改资源属性。
5090 西班牙
5091 丹麦
5092 瑞典
5093 挪威
5094 德国
5095 澳大利亚
5096 日本
5097 韩国
5098 中国
5099 台湾
5100 亚洲
5101 葡萄牙
5102 芬兰
5103 阿拉伯
5104 希伯莱
5153 UPS 服务即将执行最后的关机操作。
5170 工作站必须用 NET START 才能启动。
5175 远程 IPC
5176 远程管理
5177 默认共享
5291 永不
5292 永不
5293 永不
5295 NETUS.HLP
5296 NET.HLP
5300 网络控制块 (NCB) 请求运行成功。NCB 是相关数据。
5301 SEND DATAGRAM、SEND BROADCAST、ADAPTER STATUS 或 SESSION STATUS 的网络控制块 (NCB) 缓冲区长度无效。NCB 是相关数据。
5302 网络控制块 (NCB) 指定的数据描述数组无效。NCB 是相关数据。
5303 网络控制块 (NCB) 指定的命令无效。NCB 是相关数据。
5304 网络控制块 (NCB) 指定的消息交换码无效。NCB 是相关数据。
5305 网络控制块 (NCB) 命令超时。会话可能异常终止。NCB 是相关数据。
5306 接收的网络控制块 (NCB) 消息不完整。NCB 是相关数据。
5307 网络控制块 (NCB) 指定的缓冲区无效。NCB 是相关数据。
5308 网络控制块 (NCB) 指定的会话号码没有作用。NCB 是相关数据。
5309 网卡没有任何资源可用。网络控制块 (NCB) 请求被拒绝。NCB 是相关数据。
5310 网络控制块 (NCB) 指定的会话已经关闭。NCB 是相关数据。
5311 网络控制块 (NCB) 命令已经取消。NCB 是相关数据。
5312 网络控制块 (NCB) 指定的消息块不合逻辑。NCB 是相关数据。
5313 该名称已经存在于本地适配器名称表中。网络控制块 (NCB) 请求被拒绝。NCB 是相关数据。
5314 网卡名称表已满。网络控制块 (NCB) 请求被拒绝。NCB 是相关数据。
5315 网络名称已经有活动的会话，现在取消注册。网络控制块 (NCB) 命令运行完毕。NCB 是相关数据。
5316 先前发出的 Receive Lookahead 命令对此会话仍起作用。网络控制块 (NCB) 命令被拒绝。NCB 是相关数据。
5317 本地会话表已满。网络控制块 (NCB) 请求被拒绝。NCB 是相关数据。
5318 拒绝打开网络控制块 (NCB) 会话，远程计算机上没有侦听命令在执行。NCB 是相关数据。
5319 网络控制块 (NCB) 指定的名称号码无效。NCB 是相关数据。
5320 网络控制块 (NCB) 中指定的调用名称找不到，或者没有应答。NCB 是相关数据。
5321 网络控制块 (NCB) 中指定的名称找不到。无法将"*"或00h 填入 NCB 名称。NCB 是相关数据。
5322 网络控制块 (NCB) 中指定的名称正用于远程适配器。NCB 是相关数据。
5323 网络控制块 (NCB) 中指定的名称已经删除。NCB 是相关数据。
5324 网络控制块 (NCB) 中指定的会话异常终止。NCB 是相关数据。
5325 网络协议在网络上检测两个或数个相同的名称。 网络控制块 (NCB) 是相关数据。
5326 收到意外的协议数据包。远程设备可能不兼容。网络控制块 (NCB) 是相关数据。
5333 NetBIOS 界面正忙。网络控制块 (NCB) 请求被拒绝。NCB 是相关数据。
5334 未完成的网络控制块 (NCB) 命令太多。NCB 请求被拒绝。NCB 是相关数据。
5335 网络控制块 (NCB) 中指定的适配器号无效。NCB 是相关数据。
5336 网络控制块 (NCB) 命令在取消的同时运行完毕。NCB 是相关数据。
5337 网络控制块 (NCB) 指定的名称已经保留。NCB 是相关数据。
5338 网络控制块 (NCB) 命令无法取消。NCB 是相关数据。
5351 同一个会话有多个网络控制块 (NCB)。NCB 请求被拒绝。NCB 是相关数据。
5352 网卡出错。唯一可能发出的 NetBIOS 命令是 NCB RESET。网络控制块 (NCB) 是相关数据。
5354 超过应用程序数目上限。网络控制区 (NCB) 请求被拒绝，NCB 是相关数据。
5356 请求的资源无法使用。网络控制块 (NCB) 请求被拒绝。NCB 是相关数据。
5364 系统出错。网络控制块 (NCB) 请求被拒绝。NCB 即为数据。
5365 "ROM 校验和"失败。网络控制块 (NCB) 请求被拒绝。NCB 是相关数据。
5366 RAM 测试失败。网络控制块 (NCB) 请求被拒绝。NCB 是相关数据。
5367 数字式环回失败。网络控制块 (NCB) 请求被拒绝。NCB 是相关数据。
5368 模拟式环回失败。网络控制块 (NCB) 请求被拒绝。NCB 是相关数据。
5369 界面失败。网络控制块 (NCB) 请求被拒绝。NCB 是相关数据。
5370 收到的网络控制块 (NCB) 返回码无法识别。NCB 是相关数据。
5380 网卡故障。网络控制块 (NCB) 请求被拒绝。NCB 是相关数据。
5381 网络控制块 (NCB) 命令仍然处于搁置状态。NCB 是相关数据。
5509 Windows 2000 无法按指定的配置启动，将换用先前可工作的配置。
5600 无法共享用户或脚本路径。
5601 计算机的密码在本地安全数据库中找不到。
5602 访问计算机的本地或网络安全数据库时，发生内部错误。
5705 Netlogon 服务用于记录数据库更改数据的日志高速缓存已损坏。Netlogon 服务正在复位更改日志文件。
5728 无法加载任何传输。
5739 此域的全局组数目超过可以复制到 LanMan BDC 的限制。请删除部分的全局组或删除域中的 LanManBDC。
5742 服务无法检索必要的消息，所以无法运行远程启动客户。
5743 服务发生严重的错误，无法从远程启动3Com 3Start 远程启动客户。
5744 服务发生严重的系统错误，即将关机。
5760 服务在分析 RPL 配置时出错。
5761 服务在创建所有配置的 RPL 配置文件时出错。
5762 服务在访问注册表时出错。
5763 服务在替换可能过期的 RPLDISK.SYS 时出错。
5764 服务在添加安全帐户或设置文件权限时出错。这些帐户是独立 RPL 工作站的 RPLUSER 本地组以及用户帐户。.
5765 服务无法备份它的数据库。
5766 服务无法从它的数据库初始化。数据库可能找不到或损坏。服务会试图从备份数据库恢复该数据库。
5767 服务无法从备份数据库还原它的数据库。服务将不启动。
5768 服务无法从备份数据库还原它的数据库。
5769 服务无法从它还原的数据库初始化。服务将不启动。
5771 远程启动数据库采用 NT 3.5 / NT 3.51 格式。NT 正在转换其为 NT 4.0 格式。完成转换后，JETCONV 转换器将写出应用事件日志。
5773 该 DC 的 DNS 服务器不支持动态 DNS。将文件 $1$SystemRoot\System32\Config\netlogon.dns$1$中的 DNS 记录添加到伺服那个文件中引用的域的 DNS 服务器。
5781 由于没有可以使用的 DNS 服务器，一个或更多 DNS 记录的动态注册和注销未成功。
6000 无法加密指定的文件。
6001 指定的文件无法解密。
6002 指定的文件已加密，而且用户没有能力解密。
6003 这个系统没有有效的加密恢复策略配置。
6004 所需的加密驱动程序并未加载到系统中。
6005 文件加密所使用的加密驱动程序与目前加载的加密驱动程序不同。
6006 没有为用户定义的 EFS 关键字。
6007 指定的文件并未加密。
6008 指定的文件不是定义的 EFS 导出格式。
6009 指定的文件是只读文件。
6010 已为加密而停用目录。
6011 不信任服务器来进行远程加密操作。
6118 此工作组的服务器列表当前无法使用
6200 要正常运行，任务计划程序服务的配置必须在系统帐户中运行。单独的任务可以被配置成在其他帐户中运行。
7001 指定的会话名称无效。
7002 指定的协议驱动程序无效。
7003 在系统路径上找不到指定的协议驱动程序。
7004 在系统路径上找不到指定的终端连接。
7005 不能为这个会话创建一个事件日志的注册键。
7006 同名的一个服务已经在系统中存在。
7007 在会话上一个关闭操作挂起。
7008 没有可用的输出缓冲器。
7009 找不到 MODEM.INF 文件。
7010 在 MODEM.INF 中没有找到调制解调器名称。
7011 调制解调器没有接受发送给它的指令。验证配置的调制解调器与连接的调制解调器是否匹配。
7012 调制解调器没有接受发送给它的指令。验证该调制解调器是否接线正确并且打开了电源开关。
7013 运载工具检测失败或者由于断开连接，运载工具已被丢弃。
7014 在要求的时间内没有发现拨号音。 确定电话线连接正确并可使用。
7015 在远程站点回叫时检测到了占线信号。
7016 在回叫时远程站点上检测到了声音。
7017 传输驱动程序错误
7022 找不到指定的会话。
7023 指定的会话名称已处于使用中。
7024 由于终端连接目前正在忙于处理一个连接、断开连接、复位或删除操作，无法完成该请求的操作。
7025 试图连接到其视频模式不受当前客户支持的会话。
7035 应用程序尝试启动 DOS 图形模式。不支持 DOS 图形模式。
7037 您的交互式登录权限已被禁用。请与您的管理员联系。
7038 该请求的操作只能在系统控制台上执行。这通常是一个驱动程序或系统 DLL 要求直接控制台访问的结果。
7040 客户未能对服务器连接消息作出响应。
7041 不支持断开控制台会话。
7042 不支持重新将一个断开的会话连接到控制台。
7044 远程控制另一个会话的请求被拒绝。
7045 拒绝请求的会话访问。
7049 指定的终端连接驱动程序无效。
7050 不能远程控制该请求的会话。这也许是由于该会话被中断或目前没有一个用户登录。而且，您不能从该系统控制台远程控制一个会话或远程控制系统控制台。并且，您不能远程控制您自己的当前会话。
7051 该请求的会话没有配置成允许远程控制。
7052 拒绝连接到这个终端服务器。终端服务器客户许可证目前正在被另一个用户使用。请与系统管理员联系，获取一份新的终端服务器客户，其许可证号码必须是有效的、唯一的。
7053 拒绝连接到这个终端服务器。还没有为这份终端服务器客户输入您的终端服务器客户许可证号码。请与系统管理员联系，为该终端服务器客户输入一个有效的、唯一的许可证号码。
7054 系统已达到其授权的登录限制。请以后再试一次。
7055 您正在使用的客户没有使用该系统的授权。您的登录请求被拒绝。
7056 系统许可证已过期。您的登录请求被拒绝。
8001 文件复制服务 API 被错误调用。
8002 无法启动文件复制服务。
8003 无法停止文件复制服务。
8004 文件复制服务 API 终止了请求。事件日志可能有详细信息。
8005 该文件复制服务中断了该请求。事件日志可能有详细信息。
8006 无法联系文件复制服务。事件日志可能有详细信息。
8007 由于该用户没有足够特权，文件复制服务不能满足该请求。事件日志可能有详细信息。
8008 由于验证的 RPC 无效，文件复制服务不能满足该请求。事件日志可能有详细信息。
8009 由于该用户在域控制器上没有足够特权，文件复制服务不能满足该请求。事件日志可能有详细信息。
8010 由于在域控制器上的验证的 RPC 无效，文件复制服务不能满足该请求。事件日志可能有详细信息。
8011 该文件复制服务无法与在域控制器上的文件复制服务通讯。事件日志可能有详细信息。
8012 在域控制器上的文件复制服务无法与这台计算机上的文件复制服务通讯。事件日志可能有详细信息。
8013 由于内部错误，该文件复制服务不能进入该系统卷中。事件日志可能有详细信息。
8014 由于内部超时，该文件复制服务不能进入该系统卷中。事件日志可能有详细信息。
8015 该文件复制服务无法处理此请求。该系统卷仍在忙于前一个请求。
8016 由于内部错误，该文件复制服务无法停止复制该系统卷。事件日志可能有详细信息。
8017 该文件复制服务检测到一个无效参数。
8200 在安装目录服务时出现一个错误。有关详细信息，请查看事件日志。
8201 目录服务在本地评估组成员身份。
8202 指定的目录服务属性或值不存在。
8203 指定给目录服务的属性语法无效。
8204 指定给目录服务的属性类型未定义。
8205 指定的目录服务属性或值已经存在。
8206 目录服务忙。
8207 该目录服务无效。
8208 目录服务无法分配相对标识号。
8209 目录服务已经用完了相对标识号池。
8210 由于目录服务不是该类操作的主控，未能执行操作。
8211 目录服务无法初始化分配相对标识号的子系统。
8212 该请求的操作没有满足一个或多个与该对象的类别相关的约束。
8213 目录服务只可以在一个页状对象上运行要求的操作。
8214 目录服务不能在一个对象的 RDN 属性上执行该请求的操作。
8215 目录服务检测出修改对象类别的尝试。
8216 不能执行请求的通过域的移动操作。
8217 无法联系全局编录服务器。
8218 策略对象是共享的并只可在根目录上修改。
8219 策略对象不存在。
8220 请求的策略信息只在目录服务中。
8221 域控制器升级目前正在使用中。
8222 域控制器升级目前不在使用中
8224 出现一个操作错误。
8225 出现一个协议错误。
8226 已经超过这个请求的时间限制。
8227 已经超过这个请求的大小限制。
8228 已经超过这个请求的管理限制。
8229 比较的响应为假。
8230 比较的响应为真。
8231 这个服务器不支持请求的身份验证方式。
8232 这台服务器需要一个更安全的身份验证方式。
8233 不适当的身份验证。
8234 未知的身份验证机制。
8235 从服务器返回了一个建议。
8236 该服务器不支持该请求的关键扩展。
8237 这个请求需要一个安全的连接。
8238 不恰当的匹配。
8239 出现一个约束冲突。
8240 在服务器上没有这样一个对象。
8241 有一个别名问题。
8242 指定了一个无效的 dn 语法。
8243 该对象为叶对象。
8244 有一个别名废弃问题。
8245 该服务器不愿意处理该请求。
8246 检查到一个循环。
8247 有一个命名冲突。
8248 结果设置太大。
8249 该操作会影响到多个 DSA。
8250 该服务器不可操作。
8251 出现一个本地错误。
8252 出现一个编码错误。
8253 出现一个解码错误。
8254 无法识别寻找筛选器。
8255 一个或多个参数非法。
8256 不支持指定的方式。
8257 没有返回结果。
8258 该服务器不支持该指定的控制。
8259 客户检测到一个参考循环。
8260 超过当前的参考限制。
8301 根目录对象必须是一个命名上下文的头。该根目录对象不能有实例父类。
8302 不能执行添加副本操作。名称上下文必须可写才能创建副本。
8303 出现一个对架构中未定义的一个属性的参考。
8304 超过了一个对象的最大尺寸。
8305 尝试向目录中添加一个已在使用中的名称的对象。
8306 尝试添加一个对象，该对象属于那类在架构中没有一个 RDN 定义的类别。
8307 尝试添加一个使用 RDN 的对象，但该 RDN 不是一个在架构中定义的 RDN 。
8308 在对象中找不到任何请求的属性。
8309 用户缓冲区太小。
8310 在操作中指定的属性不出现在对象上。
8311 修改操作非法。不允许该修改的某个方面。
8312 指定的对象太大。
8313 指定的实例类别无效。
8314 操作必须在主控 DSA 执行。
8315 必须指定对象类别属性。
8316 一个所需的属性丢失。
8317 尝试修改一个对象，将一个对该类别来讲是非法的属性包括进来。
8318 在对象上指定的属性已经存在。
8320 指定的属性不存在或没有值。
8321 为只有一个值的属性指定了多个值。
8322 属性值不在接受范围内。
8323 指定的值已存在。
8324 由于不存在于对象上，不能删除该属性。
8325 由于不存在于对象上，不能删除该属性值。
8326 指定的根对象不能是子参考。
8327 不允许链接。
8328 不允许链接的评估。
8329 由于对象的父类不是未实例化就是被删除了，所以不能执行操作。
8330 不允许有一个用别名的父类。别名是叶对象。
8331 对象和父类必须是同一种类，不是都是原件就是都是副本。
8332 由于子对象存在，操作不能执行。这个操作只能在叶对象上执行。
8333 没有找到目录对象。
8334 别名对象丢失。
8335 对象名语法不对。
8336 不允许一个别名参考另一个别名。
8337 别名不能解除参考。
8338 操作超出范围。
8340 不能删除 DSA 对象。
8341 出现一个目录服务错误。
8342 操作只能在内部主控 DSA 对象上执行。
8343 对象必须为 DSA 类别。
8344 访问权不够不能执行该操作。
8345 由于父类不在可能的上级列表上，不能添加该对象。
8346 由于该属性处于"安全帐户管理器" (SAM)，不允许访问该属性。
8347 名称有太多部分。
8348 名称太长。
8349 名称值太长。
8350 目录服务遇到了一个错误分列名称。
8351 目录服务找不到一个名称的属性种类。
8352 该名称不能识别一个对象; 该名称识别一个幻象。
8353 安全描述符太短。
8354 安全描述符无效。
8355 为删除的对象创建名称失败。
8356 一个新子参考的父类必须存在。
8357 该对象必须是一个命名上下文。
8358 不允许添加一个不属于系统的属性。
8359 对象的类别必须是有结构的; 您不能实例化一个抽象的类别。
8360 找不到架构的对象。
8361 有这个 GUID (非活动的的或活动的)的本地对象已经存在。
8362 操作不能在一个后部链接上执行。
8363 找不到指定的命名上下文的互交参考。
8364 由于目录服务关闭，操作不能执行。
8365 目录服务请求无效。
8366 无法读?巧姓呤粜浴?
8367 请求的 FSMO 操作失败。不能连接当前的 FSMO 盒。
8368 不允许跨过一个命名上下文修改 DN。
8369 由于属于系统，不能修改该属性。
8370 只有复制器可以执行这个功能。
8371 指定的类别没有定义。
8372 指定的类别不是一个子类别。
8373 名称参考无效。
8374 交叉参考已经存在。
8375 不允许删除一个主控交叉参考。
8376 只在 NC 头上支持子目录树通知。
8377 通知筛选器太复杂。
8378 架构更新失败: 重复的 RDN。
8379 架构更新失败: 重复的 OID。
8380 架构更新失败: 重复的 MAPI 识别符。
8381 架构更新失败: 复制架构 id GUID。
8382 架构更新失败: 重复的 LDAP 显示名称。
8383 架构更新失败: 范围下部少于范围上部。
8384 架构更新失败: 语法不匹配。
8385 架构更新失败: 属性在必须包含中使用。
8386 架构更新失败: 属性在可能包含中使用。
8387 架构更新失败: 可能包含中的属性不存在。
8388 架构更新失败:必须包含中的属性不存在。
8389 架构更新失败: 在辅助类别列表中的类别不存在或不是一个辅助类别。
8390 架构更新失败: poss-superior 中的类别不存在。
8391 架构更新失败: 在 subclassof 列表中的类别不存在或不能满足等级规则。
8392 架构更新失败: Rdn-Att-Id 语法不对。
8393 架构更新失败: 类别作为辅助类别使用。
8394 架构更新失败: 类别作为子类别使用。
8395 架构更新失败: 类别作为 poss superior 使用。
8396 架构更新在重新计算验证缓存时失败。
8397 目录树删除没有完成。要继续删除目录树，必须再次发出请求。
8398 不能执行请求的删除操作。
8399 不能读溶构记录管理类别识别符。
8400 属性架构语法不对。
8401 不能缓存属性。
8402 不能缓存类别。
8403 不能从缓存删除属性。
8404 无法从缓存中删除类别。
8405 无法读取特殊名称的属性。
8406 丢失一个所需的子参考。
8407 不能检索范例种类属性。
8408 出现一个内部错误。
8409 出现一个数据错误。
8410 丢失一个属性 GOVERNSID。
8411 丢失一个所需要的属性。
8412 指定的命名上下文丢失了一个交叉参考。
8413 出现一个安全检查错误。
8414 没有加载架构。
8415 架构分配失败。请检查机器内存是否不足。
8416 为属性架构获得所需语法失败。
8417 全局编录验证失败。全局编录无效或不支持操作。目录的某些部分目前无效。
8418 由于有关服务器之间的架构不匹配，复制操作失败。
8419 找不到 DSA 对象。
8420 找不到命名上下文。
8421 在缓存中找不到命名上下文。
8422 无法检索子对象。
8423 由于安全原因不允许修改。
8424 操作不能替换该隐藏的记录。
8425 等级无效。
8426 尝试建立等级表失败。
8427 目录配置参数在注册中丢失。
8428 尝试计算地址簿索引失败。
8429 等级表的分配失败。
8430 目录服务遇到一个内部失败。
8431 目录服务遇到一个未知失败。
8432 根对象需要一个 $1$top$1$ 类别。
8433 这个目录服务器已关闭，并且不能接受新上浮单一主机操作角色的所有权。
8434 目录服务没有必需的配置信息，并且不能决定新上浮单一主机操作角色的所有权。
8435 该目录服务无法将一个或多个上浮单一主机操作角色传送给其它服务器。
8436 复制操作失败。
8437 为这个复制操作指定了一个无效的参数。
8438 目录服务太忙，现在无法完成这个复制操作。
8439 为这个复制操作指定的单一名称无效。
8440 为这一个复制操作所指定的命名上下文无效。
8441 为这个复制操作指定的单一名称已经存在。
8442 复制系统遇到一个内部错误。
8443 复制操作遇到数据库不一致问题。
8444 不能连接到为这个复制操作指定的服务器上。
8445 复制操作遇到一个有无效范例类型的对象。
8446 复制操作无法分配内存。
8447 复制操作遇到一个邮件系统错误。
8448 目标服务器的复制参考信息已经存在。
8449 目标服务器的复制参考信息不存在。
8450 由于是由另一台服务器上复制的，因此不能删除命名上下文。
8451 复制操作遇到一个数据库错误。
8452 命名上下文要被删除或没有从指定的服务器上复制。
8453 复制访问被拒绝。
8454 这个版本的目录服务不支持请求的操作。
8455 取消复制远程过程呼叫。
8456 源服务器目前拒绝复制请求。
8457 目标服务器当前拒绝复制请求。
8458 由于对象名称冲突，复制操作失败。
8459 复制源已被重新安装。
8460 由于一个所需父对象丢失，复制操作失败。
8461 复制操作被抢先。
8462 由于缺乏更新，放弃复制同步尝试。
8463 由于系统正在关闭，复制操作被中断了。
8464 由于目标部分属性设置不是一个源部分属性设置的子设置，复制同步尝试失败。
8465 由于主复制尝试从部分复制同步，复制同步尝试失败。
8466 已经与为这个复制操作的指定的服务器联系，但是该服务器无法与完成这个操作所需的另外一个服务器联系。
8467 在副本安装时，检测到一个使用的源和内部版本之间的架构不匹配，不能安装该副本。
8468 架构更新失败: 有同一连接标识符的属性已经存在。
8469 名称翻译: 常见处理错误。
8470 名称翻译: 不能找到该名称或权限不够，不能看到名称。
8471 名称翻译: 输入名称映射到多个输出名称。
8472 名称翻译: 找到输出名称，但是找不到相应的输出格式。
8473 名称翻译: 不能完全解析，只找到了域。
8474 名称翻译: 不接到线上，无法在客户机上执行纯粹的语法映射。
8475 不允许一个构造 att 修改。
8476 指定的 OM-Object 类别对指定语法的一个属性是不正确的。
8477 复制请求已暂停; 等待回答。
8478 要求的操作需要一个目录服务，但没有可用的。
8479 类别或属性的 LDAP 显示名称含有非 ASCII 字符。
8480 请求的查找操作只支持基本查找。
8481 查找未能从数据库检索属性。
8482 架构更新操作试图添加一个反向链接，但该反向链接没有相应的正向链接。
8483 跨域移动的来源和目标在对象日期上不一致。或者是来源，或者是目标没有对象的最后一个版本。
8484 跨域移动的来源和目标在对象当前的名称上不一致。或者是来源，或者是目标没有对象的最后一个版本。
8485 域间移动的来源和目标是一样的。调用程序应该使用本地移动操作，而不是域间移动操作。
8486 域间移动的来源和目标与目录林中的命名上下文不一致。来源或目标没有分区容器的最近版本。
8487 跨域移动的目标不是目标命名上下文的权威。
8488 跨域移动的来源和目标提供的来源对象的身份不一样。 来源或目标没有来源对象的最近版本。
8489 跨域移动的对象应该已经被目标服务器删除。来源服务器没有来源对象的最近版本。
8490 要求对 PDC FSMO 的专门访问权的另一个操作正在进行中。
8491 跨域移动没有成功，导致被移动对象有两个版本 - 一个在来源域，一个在目标域。需要删除目标对象，将系统还原到一致状态。
8492 因为不允许这个类别的跨域移动，或者对象有一些特点，如: 信任帐户或防止移动的受限制的 RID；所以不能将该对象跨域移动。
8493 一旦移动，不能将带有成员身份的对象跨域移动，这会侵犯帐户组的成员身份条件。从帐户组成员身份删除对象，再试一次。
8494 命名上下文标题必须是另一个命名上下文标题的直接子标题，而不是一个内节点的子标题。
8495 因为目录没有提议的命名上下文上面的命名上下文的副本，所以无法验证所提议的命名上下文的名称。请保证充当域命名主机的服务器已配置成全局编录服务器，并且服务器及其复制伙伴是最新的。
8496 目标域必须在本机模式中。
8497 因为服务器在指定域中没有基?峁谷萜鳎晕薹ㄖ葱胁僮鳌?
8498 不允许跨域移动帐户组。
8499 不允许跨域移动资源组。
8500 属性的搜索标志无效。ANR 位只在 Unicode 或 Teletex 字符串的属性上有效。
8501 不允许在将 NC 头作为子体的对象开始删除目录树。
8502 因为目录树在使用中，目录服务未能为删除目录树而将其锁定。
8503 删除目录树时，目录服务未能识别要删除的对象列表。
8505 只有管理员才能修改管理组的成员列表。
8506 不能改变域控制器帐户的主要组 ID。
8507 试图修改基窜构。
8508 不允许进行下列操作: 为现有类别添加新的强制属性；从现有类别删除强制属性；为没有向回链接属性的特殊类别 "Top" 添加可选属性，向回链接属性指的是直接或通过继承。例如: 添加或删除附属类别。
8509 该域控制器上不允许架构更新。没有设置注册表项，或者 DC 不是架构 FSMO 角色所有者。
8510 无法在架构容器下创建这个类别的对象。在架构容器下，您只能创建属性架构和类别架构对象。
8511 副本/子项安装未能获取源 DC 上的架构容器的 objectVersion 属性。架构容器上的属性不存在，或者提供的凭据没有读取属性的权限。
8512 副本/子项安装未能读取 system32 目录中的文件 schema.ini 的 SCHEMA 段中的 objectVersion 属性。
8513 指定的组类型无效。
8514 如果域是安全启用的，在混合型域中不能嵌套全局组。
8515 如果域是安全启用的，在混合型域中不能嵌套本地组。
8516 全局组不能将本地组作为成员。
8517 全局组不能将通用组作为成员。
8518 通用组不能将本地组作为成员。
8519 全局组不能有跨域成员。
8520 本地组不能将另一个跨域本地组作为成员。
8521 包含主要成员的组不能改变为安全停用的组。
8522 架构缓冲加载未能转换类架构对象上的字符串默认值 SD。
8523 只有配置成全局编录服务器的 DSAs 才能充当域命名主机 FSMO 的角色。
8524 由于 DNS 查找故障，DSA 操作无法进行。
8525 处理一个对象的 DNS 主机名改动时，服务主要名称数值无法保持同步。
8526 未能读取安全描述符属性。
8527 没有找到请求的对象，但找到了具有那个密钥的对象。
8528 正在添加的链接属性的语法不正确。正向链接只能有语法 2.5.5.1、2.5.5.7 和 2.5.5.14，而反向链接只能有语法 2.5.5.1
8529 安全帐户管理员需要获得启动密码。
8530 安全帐户管理员需要从软盘获得启动密钥。
8531 目录服务无法启动。
8532 未能启动目录服务。
8533 客户和服务器之间的连接要求数据包保密性。
8534 来源域跟目标域不在同一个目录林中。
8535 目标域必须在目录林中。
8536 该操作要求启用目标域审核。
8537 该操作无法为来源域找到 DC。
8538 来源对象必须是一个组或用户。
8539 来源对象的 SID 已经在目标目录林中。
8540 来源对象和目标对象必须属于同一类型。
8542 在复制请求中不能包括架构信息。
8543 由于架构不兼容性，无法完成复制操作。
8544 由于前一个架构的不兼容性，无法完成复制操作。
8545 因为源和目标都没有收到有关最近跨域启动操作的信息，所以无法应用复制更新。
8546 因为还有主控这个域的域控制器，所以无法删除请求的域。
8547 只能在全局编录服务器上执行请求的操作。
8548 本地组只能是同一个域中其他本地组的成员。
8549 外部安全主要成员不能是通用组的成员。
8550 出于安全，无法将属性复制到 GC。
8551 由于目前正在处理的修改太多，无法采取 PDC 的检查点。
8552 操作需要启用那个源域审核。
8553 安全主要对象仅能在域命名环境菜单中创建。
8554 服务主要名称(SPN) 无法建造，因为提供的主机名格式不适合。
8555 筛选器已传递建造的属性。
8556 unicodePwd 属性值必须括在双引号中。
8557 您的计算机无法加入域。已超出此域上允许创建的计算机帐户的最大值。请同系统管理员联系，复位或增加此限定值。
8558 由于安全原因，操作必须在目标 DC 上运行。
8559 由于安全原因，源 DC 必须是 Service Pack 4 或更新版本。
8560 在树目录删除的操作中不能删除"关键目录服务系统"对象。数目录删除操作可能只进行了一部分。

9001 DNS 服务器无法解释格式。
9002 DNS 服务器失败。
9003 DNS 名称不存在。
9004 名称服务器不支持 DNS 请求。
9005 拒绝 DNS 操作。
9006 不应该存在的 DNS 名称仍然存在。
9007 不应该存在的 DNS RR 集仍然存在。
9008 应该存在的 DNS RR 集不存在。
9009 DNS 服务器对区域没有权威。
9010 在更新或 prereq 中的 DNS 名称不在区域中。
9016 DNS 签名验证失败。
9017 DNS 不正确密钥。
9018 DNS 签名验证过期。
9501 为 DNS 查询找不到记录。
9502 无效 DNS 包。
9503 没有 DNS 包。
9504 DNS 错误，请检查 rcode。
9505 为保险的 DNS 包。
9551 无效的 DNS 种类。
9552 无效的 IP 地址。
9553 无效的属性。
9554 稍后再试一次 DNS 操作。
9555 给出的记录名称和种类不是单一的。
9556 DNS 名称不符合 RFC 说明。
9557 DNS 名称是一个完全合格的 DNS 名称。
9558 DNS 名称以"."分隔(多标签)。
9559 DNS 名称是单一部分名称。
9560 DNS 名称含有无效字符。
9561 DNS 名称完全是数字的。
9601 DNS 区域不存在。
9602 DNS 区域信息无效。
9603 DNS 区域无效操作。
9604 无效 DNS 区域配置。
9605 DNS 区域没有颁发机构记录的开始(SOA)。
9606 DNS 区域没有"名称服务器" (NS)的记录。
9607 DNS 区域已锁定。
9608 DNS 区域创建失败。
9609 DNS 区域已经存在。
9610 DNS 自动区域已经存在。
9611 无效的 DNS 区域种类。
9612 次要 DNS 区域需要主 IP 地址。
9613 DNS 区域不是次要的。
9614 需要一个次要 IP 地址
9615 WINS 初始化失败。
9616 需要 WINS 服务器。
9617 NBTSTAT 初始化呼叫失败。
9618 颁发机构起始(SOA)删除无效
9651 主要 DNS 区域需要数据文件。
9652 DNS 区域的无效数据文件名称。
9653 为 DNS 区域打开数据文件失败。
9654 为 DNS 区域写数据文件失败。
9655 为 DNS 区域读取数据文件时失败。
9701 DNS 记录不存在。
9702 DNS 记录格式错误。
9703 DNS 中节点创建失败。
9704 未知 DNS 记录类型。
9705 DNS 记录超时。
9706 名称不在 DNS 区域。
9707 检测到 CNAME 循环。
9708 节点为一个 CNAME DNS 记录。
9709 指定名称的 CNAME 记录已经存在。
9710 记录不在 DNS 区域根目录。
9711 DNS 记录已经存在。
9712 次要 DNS 区域数据错误。
9713 不能创建 DNS 缓存数据。
9714 DNS 名称不存在。
9715 不能创建指针(PTR)记录。
9716 DNS 域没有被删除。
9717 该目录服务无效。
9718 DNS 区域已经在目录服务中存在。
9719 DNS 服务器没有为目录服务集合 DNS 区域创建或读取启动文件。
9751 完成 DNS AXFR (区域复制)。
9752 DNS 区域复制失败。
9753 添加了本地 WINS 服务器。
9801 安全更新呼叫需要继续更新请求。
9851 TCP/IP 没有安装网络协议。
9852 没有为本地系统配置 DNS 服务器。
10004 一个封锁操作被对 WSACancelBlockingCall 的调用中断。
10009 提供的文件句柄无效。
10013 以一种访问权限不允许的方式做了一个访问套接字的尝试。
10014 系统检测到在一个调用中尝试使用指针参数时的无效指针地址。
10022 提供了一个无效的参数。
10024 打开的套接字太多。
10035 无法立即完成一个非阻挡性套接字操作。
10036 目前正在执行一个阻挡性操作。
10037 在一个非阻挡套接字上尝试了一个已经在进行的操作。
10038 在一个非套接字上尝试了一个操作。
10039 请求的地址在一个套接字中从操作中忽略。
10040 一个在数据报套接字上发送的消息大于内部消息缓冲器或其它一些网络限制，或该用户用于接收数据报的缓冲器比数据报小。
10041 在套接字函数调用中指定的一个协议不支持请求的套接字类别的语法。
10042 在 getsockopt 或 setsockopt 调用中指定的一个未知的、无效的或不受支持的选项或层次。
10043 请求的协议还没有在系统中配置，或者没有它存在的迹象。
10044 在这个地址家族中不存在对指定的插槽种类的支持。
10045 参考的对象种类不支持尝试的操作。
10046 协议家族尚未配置到系统中或没有它的存在迹象。
10047 使用了与请求的协议不兼容的地址。
10048 通常每个套接字地址 (协议/网络地址/端口)只允许使用一次。
10049 在其上下文中，该请求的地址无效。
10050 套接字操作遇到了一个已死的网络。
10051 向一个无法连接的网络尝试了一个套接字操作。
10052 当该操作在进行中，由于保持活动的操作检测到一个故障，该连接中断。
10053 您的主机中的软件放弃了一个已建立的连接。
10054 远程主机强迫关闭了一个现有的连接。
10055 由于系统缓冲区空间不足或列队已满，不能执行套接字上的操作。
10056 在一个已经连接的套接字上做了一个连接请求。
10057 由于套接字没有连接并且 (当使用一个 sendto 调用发送数据报套接字时) 没有提供地址，发送或接收数据的请求没有被接受。
10058 由于以前的关闭调用，套接字在那个方向已经关闭，发送或接收数据的请求没有被接受。
10059 对某个内核对象的引用过多。
10060 由于连接方在一段时间后没有正确的答复或连接的主机没有反应，连接尝试失败。
10061 不能做任何连接，因为目标机器积极地拒绝它。
10062 无法翻译名称。
10063 名称组件或名称太长。
10064 由于目标主机坏了，套接字操作失败。
10065 套接字操作尝试一个无法连接的主机。
10066 不能删除目录，除非它是空的。
10067 一个 Windows 套接字操作可能在可以同时使用的应用程序数目上有限制。
10068 超过限额。
10069 超过磁盘限额。
10070 文件句柄引用不再有效。
10071 项目在本地不可用。
10091 因为它使用提供网络服务的系统目前无效，WSAStartup 目前不能正常工作。
10092 不支持请求的 Windows 套接字版本
10093 应用程序没有调用 WSAStartup，或者 WSAStartup 失败。
10101 由 WSARecv 或 WSARecvFrom 返回表示远程方面已经开始了关闭步骤。
10102 WSALookupServiceNext 不能返回更多的结果。
10103 在处理这个调用时，就开始调用 WSALookupServiceEnd。该调用被删除。
10104 过程调用无效。
10105 请求的服务提供程序无效。
10106 没有加载或初始化请求的服务提供程序。
10107 从来不应失败的系统调用失败了。
10108 没有已知的此服务。在指定的名称空间中找不这个服务。
10109 找不到指定的类别。
10110 WSALookupServiceNext 不能返回更多的结果。
10111 在处理这个调用时，就开始调用 WSALookupServiceEnd。该调用被删除。
10112 由于被拒绝，数据查询失败。
11001 不知道这样的主机。
11002 这是在主机名解析时常出现的暂时错误，并且意味着本地服务器没有从权威服务器上收到响应。
11003 在数据寻找中出现一个不可恢复的错误。
11004 请求的名称有效并且是在数据库中找到，但是它没有相关的正确的数据。
11005 至少到达了一个保留。
11006 至少到达了一个路径。
11007 没有发送方。
11008 没有接受方。
11009 保留已经确认。
11010 错误是由于资源不足造成。
11011 由于管理原因被拒绝 - 无效凭据。
11012 未知或有冲突类型。
11013 某一部分的 filterspec 或 providerspecific 缓冲区有问题。
11014 flowspec 的某部分有问题。
11015 一般性 QOS 错误。
11016 在流程规格中发现一个无效的或不可识别的服务类型。
11017 在 QOS 结构中发现一个无效的或不一致的流程规格。
11018 无效的 QOS 提供程序特定缓冲区。
11019 使用了无效的 QOS 筛选器样式。
11020 使用了无效的 QOS 筛选器类型。
11021 FLOWDESCRIPTOR 中指定的 QOS FILTERSPEC 数量不正确。
11022 在 QOS 提供程序特定缓冲区中指定了一个 ObjectLength 字符域无效的对象。
11023 QOS 结构中指定的流程描述符数量不正确。
11024 在 QOS 提供程序特定缓冲区中发现一个不可识别的对象。
11025 在 QOS 提供程序特定缓冲区中发现一个无效的策略对象。
11026 在流程描述符列表中发现一个无效的 QOS 流程描述符。
11027 在 QOS 提供程序特定缓冲区中发现一个无效的或不一致的流程规格。
11028 在 QOS 提供程序特定缓冲区中发现一个无效的 FILTERSPEC。 
11029 在 QOS 提供程序特定缓冲区中发现一个无效的波形丢弃模式对象。 
11030 在 QOS 提供程序特定缓冲区中发现一个无效的成形速率对象。 
11031 在 QOS 提供程序特定缓冲区中发现一个保留的策略因素。

 

2.1  English

0 The operation completed successfully. ERROR_SUCCESS
1 Incorrect function. ERROR_INVALID_FUNCTION
2 The system cannot find the file specified. ERROR_FILE_NOT_FOUND
3 The system cannot find the path specified. ERROR_PATH_NOT_FOUND
4 The system cannot open the file. ERROR_TOO_MANY_OPEN_FILES
5 Access is denied. ERROR_ACCESS_DENIED
6 The handle is invalid. ERROR_INVALID_HANDLE
7 The storage control blocks were destroyed. ERROR_ARENA_TRASHED
8 Not enough storage is available to process this command. ERROR_NOT_ENOUGH_MEMORY
9 The storage control block address is invalid. ERROR_INVALID_BLOCK
10 The environment is incorrect. ERROR_BAD_ENVIRONMENT
11 An attempt was made to load a program with an incorrect format. ERROR_BAD_FORMAT
12 The access code is invalid. ERROR_INVALID_ACCESS
13 The data is invalid. ERROR_INVALID_DATA
14 Not enough storage is available to complete this operation. ERROR_OUTOFMEMORY
15 The system cannot find the drive specified. ERROR_INVALID_DRIVE
16 The directory cannot be removed. ERROR_CURRENT_DIRECTORY
17 The system cannot move the file to a different disk drive. ERROR_NOT_SAME_DEVICE
18 There are no more files. ERROR_NO_MORE_FILES
19 The media is write protected. ERROR_WRITE_PROTECT
20 The system cannot find the device specified. ERROR_BAD_UNIT
21 The device is not ready. ERROR_NOT_READY
22 The device does not recognize the command. ERROR_BAD_COMMAND
23 Data error (cyclic redundancy check). ERROR_CRC
24 The program issued a command but the command length is incorrect. ERROR_BAD_LENGTH
25 The drive cannot locate a specific area or track on the disk. ERROR_SEEK
26 The specified disk or diskette cannot be accessed. ERROR_NOT_DOS_DISK
27 The drive cannot find the sector requested. ERROR_SECTOR_NOT_FOUND
28 The printer is out of paper. ERROR_OUT_OF_PAPER
29 The system cannot write to the specified device. ERROR_WRITE_FAULT
30 The system cannot read from the specified device. ERROR_READ_FAULT
31 A device attached to the system is not functioning. ERROR_GEN_FAILURE
32 The process cannot access the file because it is being used by another process. ERROR_SHARING_VIOLATION
33 The process cannot access the file because another process has locked a portion of the file. ERROR_LOCK_VIOLATION
34 The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1. ERROR_WRONG_DISK
36 Too many files opened for sharing. ERROR_SHARING_BUFFER_EXCEEDED
38 Reached the end of the file. ERROR_HANDLE_EOF
39 The disk is full. ERROR_HANDLE_DISK_FULL
50 The request is not supported. ERROR_NOT_SUPPORTED
51 Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator. ERROR_REM_NOT_LIST
52 You were not connected because a duplicate name exists on the network. Go to System in the Control Panel to change the computer name and try again. ERROR_DUP_NAME
53 The network path was not found. ERROR_BAD_NETPATH
54 The network is busy. ERROR_NETWORK_BUSY
55 The specified network resource or device is no longer available. ERROR_DEV_NOT_EXIST
56 The network BIOS command limit has been reached. ERROR_TOO_MANY_CMDS
57 A network adapter hardware error occurred. ERROR_ADAP_HDW_ERR
58 The specified server cannot perform the requested operation. ERROR_BAD_NET_RESP
59 An unexpected network error occurred. ERROR_UNEXP_NET_ERR
60 The remote adapter is not compatible. ERROR_BAD_REM_ADAP
61 The printer queue is full. ERROR_PRINTQ_FULL
62 Space to store the file waiting to be printed is not available on the server. ERROR_NO_SPOOL_SPACE
63 Your file waiting to be printed was deleted. ERROR_PRINT_CANCELLED
64 The specified network name is no longer available. ERROR_NETNAME_DELETED
65 Network access is denied. ERROR_NETWORK_ACCESS_DENIED
66 The network resource type is not correct. ERROR_BAD_DEV_TYPE
67 The network name cannot be found. ERROR_BAD_NET_NAME
68 The name limit for the local computer network adapter card was exceeded. ERROR_TOO_MANY_NAMES
69 The network BIOS session limit was exceeded. ERROR_TOO_MANY_SESS
70 The remote server has been paused or is in the process of being started. ERROR_SHARING_PAUSED
71 No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept. ERROR_REQ_NOT_ACCEP
72 The specified printer or disk device has been paused. ERROR_REDIR_PAUSED
80 The file exists. ERROR_FILE_EXISTS
82 The directory or file cannot be created. ERROR_CANNOT_MAKE
83 Fail on INT 24. ERROR_FAIL_I24
84 Storage to process this request is not available. ERROR_OUT_OF_STRUCTURES
85 The local device name is already in use. ERROR_ALREADY_ASSIGNED
86 The specified network password is not correct. ERROR_INVALID_PASSWORD
87 The parameter is incorrect. ERROR_INVALID_PARAMETER
88 A write fault occurred on the network. ERROR_NET_WRITE_FAULT
89 The system cannot start another process at this time. ERROR_NO_PROC_SLOTS
100 Cannot create another system semaphore. ERROR_TOO_MANY_SEMAPHORES
101 The exclusive semaphore is owned by another process. ERROR_EXCL_SEM_ALREADY_OWNED
102 The semaphore is set and cannot be closed. ERROR_SEM_IS_SET
103 The semaphore cannot be set again. ERROR_TOO_MANY_SEM_REQUESTS
104 Cannot request exclusive semaphores at interrupt time. ERROR_INVALID_AT_INTERRUPT_TIME
105 The previous ownership of this semaphore has ended. ERROR_SEM_OWNER_DIED
106 Insert the diskette for drive %1. ERROR_SEM_USER_LIMIT
107 The program stopped because an alternate diskette was not inserted. ERROR_DISK_CHANGE
108 The disk is in use or locked by another process. ERROR_DRIVE_LOCKED
109 The pipe has been ended. ERROR_BROKEN_PIPE
110 The system cannot open the device or file specified. ERROR_OPEN_FAILED
111 The file name is too long. ERROR_BUFFER_OVERFLOW
112 There is not enough space on the disk. ERROR_DISK_FULL
113 No more internal file identifiers available. ERROR_NO_MORE_SEARCH_HANDLES
114 The target internal file identifier is incorrect. ERROR_INVALID_TARGET_HANDLE
117 The IOCTL call made by the application program is not correct. ERROR_INVALID_CATEGORY
118 The verify-on-write switch parameter value is not correct. ERROR_INVALID_VERIFY_SWITCH
119 The system does not support the command requested. ERROR_BAD_DRIVER_LEVEL
120 This function is not supported on this system. ERROR_CALL_NOT_IMPLEMENTED
121 The semaphore timeout period has expired. ERROR_SEM_TIMEOUT
122 The data area passed to a system call is too small. ERROR_INSUFFICIENT_BUFFER
123 The filename, directory name, or volume label syntax is incorrect. ERROR_INVALID_NAME
124 The system call level is not correct. ERROR_INVALID_LEVEL
125 The disk has no volume label. ERROR_NO_VOLUME_LABEL
126 The specified module could not be found. ERROR_MOD_NOT_FOUND
127 The specified procedure could not be found. ERROR_PROC_NOT_FOUND
128 There are no child processes to wait for. ERROR_WAIT_NO_CHILDREN
129 The %1 application cannot be run in Win32 mode. ERROR_CHILD_NOT_COMPLETE
130 Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O. ERROR_DIRECT_ACCESS_HANDLE
131 An attempt was made to move the file pointer before the beginning of the file. ERROR_NEGATIVE_SEEK
132 The file pointer cannot be set on the specified device or file. ERROR_SEEK_ON_DEVICE
133 A JOIN or SUBST command cannot be used for a drive that contains previously joined drives. ERROR_IS_JOIN_TARGET
134 An attempt was made to use a JOIN or SUBST command on a drive that has already been joined. ERROR_IS_JOINED
135 An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted. ERROR_IS_SUBSTED
136 The system tried to delete the JOIN of a drive that is not joined. ERROR_NOT_JOINED
137 The system tried to delete the substitution of a drive that is not substituted. ERROR_NOT_SUBSTED
138 The system tried to join a drive to a directory on a joined drive. ERROR_JOIN_TO_JOIN
139 The system tried to substitute a drive to a directory on a substituted drive. ERROR_SUBST_TO_SUBST
140 The system tried to join a drive to a directory on a substituted drive. ERROR_JOIN_TO_SUBST
141 The system tried to SUBST a drive to a directory on a joined drive. ERROR_SUBST_TO_JOIN
142 The system cannot perform a JOIN or SUBST at this time. ERROR_BUSY_DRIVE
143 The system cannot join or substitute a drive to or for a directory on the same drive. ERROR_SAME_DRIVE
144 The directory is not a subdirectory of the root directory. ERROR_DIR_NOT_ROOT
145 The directory is not empty. ERROR_DIR_NOT_EMPTY
146 The path specified is being used in a substitute. ERROR_IS_SUBST_PATH
147 Not enough resources are available to process this command. ERROR_IS_JOIN_PATH
148 The path specified cannot be used at this time. ERROR_PATH_BUSY
149 An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute. ERROR_IS_SUBST_TARGET
150 System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed. ERROR_SYSTEM_TRACE
151 The number of specified semaphore events for DosMuxSemWait is not correct. ERROR_INVALID_EVENT_COUNT
152 DosMuxSemWait did not execute; too many semaphores are already set. ERROR_TOO_MANY_MUXWAITERS
153 The DosMuxSemWait list is not correct. ERROR_INVALID_LIST_FORMAT
154 The volume label you entered exceeds the label character limit of the target file system. ERROR_LABEL_TOO_LONG
155 Cannot create another thread. ERROR_TOO_MANY_TCBS
156 The recipient process has refused the signal. ERROR_SIGNAL_REFUSED
157 The segment is already discarded and cannot be locked. ERROR_DISCARDED
158 The segment is already unlocked. ERROR_NOT_LOCKED
159 The address for the thread ID is not correct. ERROR_BAD_THREADID_ADDR
160 The argument string passed to DosExecPgm is not correct. ERROR_BAD_ARGUMENTS
161 The specified path is invalid. ERROR_BAD_PATHNAME
162 A signal is already pending. ERROR_SIGNAL_PENDING
164 No more threads can be created in the system. ERROR_MAX_THRDS_REACHED
167 Unable to lock a region of a file. ERROR_LOCK_FAILED
170 The requested resource is in use. ERROR_BUSY
173 A lock request was not outstanding for the supplied cancel region. ERROR_CANCEL_VIOLATION
174 The file system does not support atomic changes to the lock type. ERROR_ATOMIC_LOCKS_NOT_SUPPORTED
180 The system detected a segment number that was not correct. ERROR_INVALID_SEGMENT_NUMBER
182 The operating system cannot run %1. ERROR_INVALID_ORDINAL
183 Cannot create a file when that file already exists. ERROR_ALREADY_EXISTS
186 The flag passed is not correct. ERROR_INVALID_FLAG_NUMBER
187 The specified system semaphore name was not found. ERROR_SEM_NOT_FOUND
188 The operating system cannot run %1. ERROR_INVALID_STARTING_CODESEG
189 The operating system cannot run %1. ERROR_INVALID_STACKSEG
190 The operating system cannot run %1. ERROR_INVALID_MODULETYPE
191 Cannot run %1 in Win32 mode. ERROR_INVALID_EXE_SIGNATURE
192 The operating system cannot run %1. ERROR_EXE_MARKED_INVALID
193 %1 is not a valid Win32 application. ERROR_BAD_EXE_FORMAT
194 The operating system cannot run %1. ERROR_ITERATED_DATA_EXCEEDS_64k
195 The operating system cannot run %1. ERROR_INVALID_MINALLOCSIZE
196 The operating system cannot run this application program. ERROR_DYNLINK_FROM_INVALID_RING
197 The operating system is not presently configured to run this application. ERROR_IOPL_NOT_ENABLED
198 The operating system cannot run %1. ERROR_INVALID_SEGDPL
199 The operating system cannot run this application program. ERROR_AUTODATASEG_EXCEEDS_64k
200 The code segment cannot be greater than or equal to 64K. ERROR_RING2SEG_MUST_BE_MOVABLE
201 The operating system cannot run %1. ERROR_RELOC_CHAIN_XEEDS_SEGLIM
202 The operating system cannot run %1. ERROR_INFLOOP_IN_RELOC_CHAIN
203 The system could not find the environment option that was entered. ERROR_ENVVAR_NOT_FOUND
205 No process in the command subtree has a signal handler. ERROR_NO_SIGNAL_SENT
206 The filename or extension is too long. ERROR_FILENAME_EXCED_RANGE
207 The ring 2 stack is in use. ERROR_RING2_STACK_IN_USE
208 The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified. ERROR_META_EXPANSION_TOO_LONG
209 The signal being posted is not correct. ERROR_INVALID_SIGNAL_NUMBER
210 The signal handler cannot be set. ERROR_THREAD_1_INACTIVE
212 The segment is locked and cannot be reallocated. ERROR_LOCKED
214 Too many dynamic-link modules are attached to this program or dynamic-link module. ERROR_TOO_MANY_MODULES
215 Cannot nest calls to LoadModule. ERROR_NESTING_NOT_ALLOWED
216 The image file %1 is valid, but is for a machine type other than the current machine. ERROR_EXE_MACHINE_TYPE_MISMATCH
217 The image file %1 is signed, unable to modify. ERROR_EXE_CANNOT_MODIFY_SIGNED_BINARY
218 The image file %1 is strong signed, unable to modify. ERRO_EXE_CANNOT_MODIFY_STRONG_SIGNED_BINARY
230 The pipe state is invalid. ERROR_BAD_PIPE
231 All pipe instances are busy. ERROR_PIPE_BUSY
232 The pipe is being closed. ERROR_NO_DATA
233 No process is on the other end of the pipe. ERROR_PIPE_NOT_CONNECTED
234 More data is available. ERROR_MORE_DATA
240 The session was canceled. ERROR_VC_DISCONNECTED
254 The specified extended attribute name was invalid. ERROR_INVALID_EA_NAME
255 The extended attributes are inconsistent. ERROR_EA_LIST_INCONSISTENT
258 The wait operation timed out. WAIT_TIMEOUT
259 No more data is available. ERROR_NO_MORE_ITEMS
266 The copy functions cannot be used. ERROR_CANNOT_COPY
267 The directory name is invalid. ERROR_DIRECTORY
275 The extended attributes did not fit in the buffer. ERROR_EAS_DIDNT_FIT
276 The extended attribute file on the mounted file system is corrupt. ERROR_EA_FILE_CORRUPT
277 The extended attribute table file is full. ERROR_EA_TABLE_FULL
278 The specified extended attribute handle is invalid. ERROR_INVALID_EA_HANDLE
282 The mounted file system does not support extended attributes. ERROR_EAS_NOT_SUPPORTED
288 Attempt to release mutex not owned by caller. ERROR_NOT_OWNER
298 Too many posts were made to a semaphore. ERROR_TOO_MANY_POSTS
299 Only part of a ReadProcessMemory or WriteProcessMemory request was completed. ERROR_PARTIAL_COPY
300 The oplock request is denied. ERROR_OPLOCK_NOT_GRANTED
301 An invalid oplock acknowledgment was received by the system. ERROR_INVALID_OPLOCK_PROTOCOL
302 The volume is too fragmented to complete this operation. ERROR_DISK_TOO_FRAGMENTED
303 The file cannot be opened because it is in the process of being deleted. ERROR_DELETE_PENDING
317 The system cannot find message text for message number 0x%1 in the message file for %2. ERROR_MR_MID_NOT_FOUND
318 The scope specified was not found. ERROR_SCOPE_NOT_FOUND
487 Attempt to access invalid address. ERROR_INVALID_ADDRESS
534 Arithmetic result exceeded 32 bits. ERROR_ARITHMETIC_OVERFLOW
535 There is a process on other end of the pipe. ERROR_PIPE_CONNECTED
536 Waiting for a process to open the other end of the pipe. ERROR_PIPE_LISTENING
994 Access to the extended attribute was denied. ERROR_EA_ACCESS_DENIED
995 The I/O operation has been aborted because of either a thread exit or an application request. ERROR_OPERATION_ABORTED
996 Overlapped I/O event is not in a signaled state. ERROR_IO_INCOMPLETE
997 Overlapped I/O operation is in progress. ERROR_IO_PENDING
998 Invalid access to memory location. ERROR_NOACCESS
999 Error performing inpage operation. ERROR_SWAPERROR
1001 Recursion too deep; the stack overflowed. ERROR_STACK_OVERFLOW
1002 The window cannot act on the sent message. ERROR_INVALID_MESSAGE
1003 Cannot complete this function. ERROR_CAN_NOT_COMPLETE
1004 Invalid flags. ERROR_INVALID_FLAGS
1005 The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted. ERROR_UNRECOGNIZED_VOLUME
1006 The volume for a file has been externally altered so that the opened file is no longer valid. ERROR_FILE_INVALID
1007 The requested operation cannot be performed in full-screen mode. ERROR_FULLSCREEN_MODE
1008 An attempt was made to reference a token that does not exist. ERROR_NO_TOKEN
1009 The configuration registry database is corrupt. ERROR_BADDB
1010 The configuration registry key is invalid. ERROR_BADKEY
1011 The configuration registry key could not be opened. ERROR_CANTOPEN
1012 The configuration registry key could not be read. ERROR_CANTREAD
1013 The configuration registry key could not be written. ERROR_CANTWRITE
1014 One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful. ERROR_REGISTRY_RECOVERED
1015 The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system's memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted. ERROR_REGISTRY_CORRUPT
1016 An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry. ERROR_REGISTRY_IO_FAILED
1017 The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format. ERROR_NOT_REGISTRY_FILE
1018 Illegal operation attempted on a registry key that has been marked for deletion. ERROR_KEY_DELETED
1019 System could not allocate the required space in a registry log. ERROR_NO_LOG_SPACE
1020 Cannot create a symbolic link in a registry key that already has subkeys or values. ERROR_KEY_HAS_CHILDREN
1021 Cannot create a stable subkey under a volatile parent key. ERROR_CHILD_MUST_BE_VOLATILE
1022 A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes. ERROR_NOTIFY_ENUM_DIR
1051 A stop control has been sent to a service that other running services are dependent on. ERROR_DEPENDENT_SERVICES_RUNNING
1052 The requested control is not valid for this service. ERROR_INVALID_SERVICE_CONTROL
1053 The service did not respond to the start or control request in a timely fashion. ERROR_SERVICE_REQUEST_TIMEOUT
1054 A thread could not be created for the service. ERROR_SERVICE_NO_THREAD
1055 The service database is locked. ERROR_SERVICE_DATABASE_LOCKED
1056 An instance of the service is already running. ERROR_SERVICE_ALREADY_RUNNING
1057 The account name is invalid or does not exist, or the password is invalid for the account name specified. ERROR_INVALID_SERVICE_ACCOUNT
1058 The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. ERROR_SERVICE_DISABLED
1059 Circular service dependency was specified. ERROR_CIRCULAR_DEPENDENCY
1060 The specified service does not exist as an installed service. ERROR_SERVICE_DOES_NOT_EXIST
1061 The service cannot accept control messages at this time. ERROR_SERVICE_CANNOT_ACCEPT_CTRL
1062 The service has not been started. ERROR_SERVICE_NOT_ACTIVE
1063 The service process could not connect to the service controller. ERROR_FAILED_SERVICE_CONTROLLER_CONNECT
1064 An exception occurred in the service when handling the control request. ERROR_EXCEPTION_IN_SERVICE
1065 The database specified does not exist. ERROR_DATABASE_DOES_NOT_EXIST
1066 The service has returned a service-specific error code. ERROR_SERVICE_SPECIFIC_ERROR
1067 The process terminated unexpectedly. ERROR_PROCESS_ABORTED
1068 The dependency service or group failed to start. ERROR_SERVICE_DEPENDENCY_FAIL
1069 The service did not start due to a logon failure. ERROR_SERVICE_LOGON_FAILED
1070 After starting, the service hung in a start-pending state. ERROR_SERVICE_START_HANG
1071 The specified service database lock is invalid. ERROR_INVALID_SERVICE_LOCK
1072 The specified service has been marked for deletion. ERROR_SERVICE_MARKED_FOR_DELETE
1073 The specified service already exists. ERROR_SERVICE_EXISTS
1074 The system is currently running with the last-known-good configuration. ERROR_ALREADY_RUNNING_LKG
1075 The dependency service does not exist or has been marked for deletion. ERROR_SERVICE_DEPENDENCY_DELETED
1076 The current boot has already been accepted for use as the last-known-good control set. ERROR_BOOT_ALREADY_ACCEPTED
1077 No attempts to start the service have been made since the last boot. ERROR_SERVICE_NEVER_STARTED
1078 The name is already in use as either a service name or a service display name. ERROR_DUPLICATE_SERVICE_NAME
1079 The account specified for this service is different from the account specified for other services running in the same process. ERROR_DIFFERENT_SERVICE_ACCOUNT
1080 Failure actions can only be set for Win32 services, not for drivers. ERROR_CANNOT_DETECT_DRIVER_FAILURE
1081 This service runs in the same process as the service control manager. Therefore, the service control manager cannot take action if this service's process terminates unexpectedly. ERROR_CANNOT_DETECT_PROCESS_ABORT
1082 No recovery program has been configured for this service. ERROR_NO_RECOVERY_PROGRAM
1083 The executable program that this service is configured to run in does not implement the service. ERROR_SERVICE_NOT_IN_EXE
1084 This service cannot be started in Safe Mode. ERROR_NOT_SAFEBOOT_SERVICE
1100 The physical end of the tape has been reached. ERROR_END_OF_MEDIA
1101 A tape access reached a filemark. ERROR_FILEMARK_DETECTED
1102 The beginning of the tape or a partition was encountered. ERROR_BEGINNING_OF_MEDIA
1103 A tape access reached the end of a set of files. ERROR_SETMARK_DETECTED
1104 No more data is on the tape. ERROR_NO_DATA_DETECTED
1105 Tape could not be partitioned. ERROR_PARTITION_FAILURE
1106 When accessing a new tape of a multivolume partition, the current block size is incorrect. ERROR_INVALID_BLOCK_LENGTH
1107 Tape partition information could not be found when loading a tape. ERROR_DEVICE_NOT_PARTITIONED
1108 Unable to lock the media eject mechanism. ERROR_UNABLE_TO_LOCK_MEDIA
1109 Unable to unload the media. ERROR_UNABLE_TO_UNLOAD_MEDIA
1110 The media in the drive may have changed. ERROR_MEDIA_CHANGED
1111 The I/O bus was reset. ERROR_BUS_RESET
1112 No media in drive. ERROR_NO_MEDIA_IN_DRIVE
1113 No mapping for the Unicode character exists in the target multi-byte code page. ERROR_NO_UNICODE_TRANSLATION
1114 A dynamic link library (DLL) initialization routine failed. ERROR_DLL_INIT_FAILED
1115 A system shutdown is in progress. ERROR_SHUTDOWN_IN_PROGRESS
1116 Unable to abort the system shutdown because no shutdown was in progress. ERROR_NO_SHUTDOWN_IN_PROGRESS
1117 The request could not be performed because of an I/O device error. ERROR_IO_DEVICE
1118 No serial device was successfully initialized. The serial driver will unload. ERROR_SERIAL_NO_DEVICE
1119 Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened. ERROR_IRQ_BUSY
1120 A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.) ERROR_MORE_WRITES
1121 A serial I/O operation completed because the timeout period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.) ERROR_COUNTER_TIMEOUT
1122 No ID address mark was found on the floppy disk. ERROR_FLOPPY_ID_MARK_NOT_FOUND
1123 Mismatch between the floppy disk sector ID field and the floppy disk controller track address. ERROR_FLOPPY_WRONG_CYLINDER
1124 The floppy disk controller reported an error that is not recognized by the floppy disk driver. ERROR_FLOPPY_UNKNOWN_ERROR
1125 The floppy disk controller returned inconsistent results in its registers. ERROR_FLOPPY_BAD_REGISTERS
1126 While accessing the hard disk, a recalibrate operation failed, even after retries. ERROR_DISK_RECALIBRATE_FAILED
1127 While accessing the hard disk, a disk operation failed even after retries. ERROR_DISK_OPERATION_FAILED
1128 While accessing the hard disk, a disk controller reset was needed, but even that failed. ERROR_DISK_RESET_FAILED
1129 Physical end of tape encountered. ERROR_EOM_OVERFLOW
1130 Not enough server storage is available to process this command. ERROR_NOT_ENOUGH_SERVER_MEMORY
1131 A potential deadlock condition has been detected. ERROR_POSSIBLE_DEADLOCK
1132 The base address or the file offset specified does not have the proper alignment. ERROR_MAPPED_ALIGNMENT
1140 An attempt to change the system power state was vetoed by another application or driver. ERROR_SET_POWER_STATE_VETOED
1141 The system BIOS failed an attempt to change the system power state. ERROR_SET_POWER_STATE_FAILED
1142 An attempt was made to create more links on a file than the file system supports. ERROR_TOO_MANY_LINKS
1150 The specified program requires a newer version of Windows. ERROR_OLD_WIN_VERSION
1151 The specified program is not a Windows or MS-DOS program. ERROR_APP_WRONG_OS
1152 Cannot start more than one instance of the specified program. ERROR_SINGLE_INSTANCE_APP
1153 The specified program was written for an earlier version of Windows. ERROR_RMODE_APP
1154 One of the library files needed to run this application is damaged. ERROR_INVALID_DLL
1155 No application is associated with the specified file for this operation. ERROR_NO_ASSOCIATION
1156 An error occurred in sending the command to the application. ERROR_DDE_FAIL
1157 One of the library files needed to run this application cannot be found. ERROR_DLL_NOT_FOUND
1158 The current process has used all of its system allowance of handles for Window Manager objects. ERROR_NO_MORE_USER_HANDLES
1159 The message can be used only with synchronous operations. ERROR_MESSAGE_SYNC_ONLY
1160 The indicated source element has no media. ERROR_SOURCE_ELEMENT_EMPTY
1161 The indicated destination element already contains media. ERROR_DESTINATION_ELEMENT_FULL
1162 The indicated element does not exist. ERROR_ILLEGAL_ELEMENT_ADDRESS
1163 The indicated element is part of a magazine that is not present. ERROR_MAGAZINE_NOT_PRESENT
1164 The indicated device requires reinitialization due to hardware errors. ERROR_DEVICE_REINITIALIZATION_NEEDED
1165 The device has indicated that cleaning is required before further operations are attempted. ERROR_DEVICE_REQUIRES_CLEANING
1166 The device has indicated that its door is open. ERROR_DEVICE_DOOR_OPEN
1167 The device is not connected. ERROR_DEVICE_NOT_CONNECTED
1168 Element not found. ERROR_NOT_FOUND
1169 There was no match for the specified key in the index. ERROR_NO_MATCH
1170 The property set specified does not exist on the object. ERROR_SET_NOT_FOUND
1171 The point passed to GetMouseMovePointsEx is not in the buffer. ERROR_POINT_NOT_FOUND
1172 The tracking (workstation) service is not running. ERROR_NO_TRACKING_SERVICE
1173 The Volume ID could not be found. ERROR_NO_VOLUME_ID
1175 Unable to remove the file to be replaced. ERROR_UNABLE_TO_REMOVE_REPLACED
1176 Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name. ERROR_UNABLE_TO_MOVE_REPLACEMENT
1177 Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name. ERROR_UNABLE_TO_MOVE_REPLACEMENT_2
1178 The volume change journal is being deleted. ERROR_JOURNAL_DELETE_IN_PROGRESS
1179 The volume change journal is not active. ERROR_JOURNAL_NOT_ACTIVE
1180 A file was found, but it may not be the correct file. ERROR_POTENTIAL_FILE_FOUND
1181 The journal entry has been deleted from the journal. ERROR_JOURNAL_ENTRY_DELETED
1200 The specified device name is invalid. ERROR_BAD_DEVICE
1201 The device is not currently connected but it is a remembered connection. ERROR_CONNECTION_UNAVAIL
1202 The local device name has a remembered connection to another network resource. ERROR_DEVICE_ALREADY_REMEMBERED
1203 No network provider accepted the given network path. ERROR_NO_NET_OR_BAD_PATH
1204 The specified network provider name is invalid. ERROR_BAD_PROVIDER
1205 Unable to open the network connection profile. ERROR_CANNOT_OPEN_PROFILE
1206 The network connection profile is corrupted. ERROR_BAD_PROFILE
1207 Cannot enumerate a noncontainer. ERROR_NOT_CONTAINER
1208 An extended error has occurred. ERROR_EXTENDED_ERROR
1209 The format of the specified group name is invalid. ERROR_INVALID_GROUPNAME
1210 The format of the specified computer name is invalid. ERROR_INVALID_COMPUTERNAME
1211 The format of the specified event name is invalid. ERROR_INVALID_EVENTNAME
1212 The format of the specified domain name is invalid. ERROR_INVALID_DOMAINNAME
1213 The format of the specified service name is invalid. ERROR_INVALID_SERVICENAME
1214 The format of the specified network name is invalid. ERROR_INVALID_NETNAME
1215 The format of the specified share name is invalid. ERROR_INVALID_SHARENAME
1216 The format of the specified password is invalid. ERROR_INVALID_PASSWORDNAME
1217 The format of the specified message name is invalid. ERROR_INVALID_MESSAGENAME
1218 The format of the specified message destination is invalid. ERROR_INVALID_MESSAGEDEST
1219 Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again. ERROR_SESSION_CREDENTIAL_CONFLICT
1220 An attempt was made to establish a session to a network server, but there are already too many sessions established to that server. ERROR_REMOTE_SESSION_LIMIT_EXCEEDED
1221 The workgroup or domain name is already in use by another computer on the network. ERROR_DUP_DOMAINNAME
1222 The network is not present or not started. ERROR_NO_NETWORK
1223 The operation was canceled by the user. ERROR_CANCELLED
1224 The requested operation cannot be performed on a file with a user-mapped section open. ERROR_USER_MAPPED_FILE
1225 The remote system refused the network connection. ERROR_CONNECTION_REFUSED
1226 The network connection was gracefully closed. ERROR_GRACEFUL_DISCONNECT
1227 The network transport endpoint already has an address associated with it. ERROR_ADDRESS_ALREADY_ASSOCIATED
1228 An address has not yet been associated with the network endpoint. ERROR_ADDRESS_NOT_ASSOCIATED
1229 An operation was attempted on a nonexistent network connection. ERROR_CONNECTION_INVALID
1230 An invalid operation was attempted on an active network connection. ERROR_CONNECTION_ACTIVE
1231 The network location cannot be reached. For information about network troubleshooting, see Windows Help. ERROR_NETWORK_UNREACHABLE
1232 The network location cannot be reached. For information about network troubleshooting, see Windows Help. ERROR_HOST_UNREACHABLE
1233 The network location cannot be reached. For information about network troubleshooting, see Windows Help. ERROR_PROTOCOL_UNREACHABLE
1234 No service is operating at the destination network endpoint on the remote system. ERROR_PORT_UNREACHABLE
1235 The request was aborted. ERROR_REQUEST_ABORTED
1236 The network connection was aborted by the local system. ERROR_CONNECTION_ABORTED
1237 The operation could not be completed. A retry should be performed. ERROR_RETRY
1238 A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached. ERROR_CONNECTION_COUNT_LIMIT
1239 Attempting to log in during an unauthorized time of day for this account. ERROR_LOGIN_TIME_RESTRICTION
1240 The account is not authorized to log in from this station. ERROR_LOGIN_WKSTA_RESTRICTION
1241 The network address could not be used for the operation requested. ERROR_INCORRECT_ADDRESS
1242 The service is already registered. ERROR_ALREADY_REGISTERED
1243 The specified service does not exist. ERROR_SERVICE_NOT_FOUND
1244 The operation being requested was not performed because the user has not been authenticated. ERROR_NOT_AUTHENTICATED
1245 The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist. ERROR_NOT_LOGGED_ON
1246 Continue with work in progress. ERROR_CONTINUE
1247 An attempt was made to perform an initialization operation when initialization has already been completed. ERROR_ALREADY_INITIALIZED
1248 No more local devices. ERROR_NO_MORE_DEVICES
1249 The specified site does not exist. ERROR_NO_SUCH_SITE
1250 A domain controller with the specified name already exists. ERROR_DOMAIN_CONTROLLER_EXISTS
1251 This operation is supported only when you are connected to the server. ERROR_ONLY_IF_CONNECTED
1252 The group policy framework should call the extension even if there are no changes. ERROR_OVERRIDE_NOCHANGES
1253 The specified user does not have a valid profile. ERROR_BAD_USER_PROFILE
1254 This operation is not supported on a Microsoft Small Business Server. ERROR_NOT_SUPPORTED_ON_SBS
1255 The server machine is shutting down. ERROR_SERVER_SHUTDOWN_IN_PROGRESS
1256 The remote system is not available. For information about network troubleshooting, see Windows Help. ERROR_HOST_DOWN
1257 The security identifier provided is not from an account domain. ERROR_NON_ACCOUNT_SID
1258 The security identifier provided does not have a domain component. ERROR_NON_DOMAIN_SID
1259 AppHelp dialog canceled thus preventing the application from starting. ERROR_APPHELP_BLOCK
1260 Windows cannot open this program because it has been prevented by a software restriction policy. For more information, open Event Viewer or contact your system administrator. ERROR_ACCESS_DISABLED_BY_POLICY
1261 A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific. ERROR_REG_NAT_CONSUMPTION
1262 The share is currently offline or does not exist. ERROR_CSCSHARE_OFFLINE
1263 The kerberos protocol encountered an error while validating the KDC certificate during smartcard logon. ERROR_PKINIT_FAILURE
1264 The kerberos protocol encountered an error while attempting to utilize the smartcard subsystem. ERROR_SMARTCARD_SUBSYSTEM_FAILURE
1265 The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you. ERROR_DOWNGRADE_DETECTED
1266 The smartcard certificate used for authentication has been revoked. Please contact your system administrator. There may be additional information in the event log. SEC_E_SMARTCARD_CERT_REVOKED
1267 An untrusted certificate authority was detected while processing the smartcard certificate used for authentication. Please contact your system administrator. SEC_E_ISSUING_CA_UNTRUSTED
1268 The revocation status of the smartcard certificate used for authentication could not be determined. Please contact your system administrator. SEC_E_REVOCATION_OFFLINE_C
1269 The smartcard certificate used for authentication was not trusted. Please contact your system administrator. SEC_E_PKINIT_CLIENT_FAILUR
1270 The smartcard certificate used for authentication has expired. Please contact your system administrator. SEC_E_SMARTCARD_CERT_EXPIRED
1271 The machine is locked and cannot be shut down without the force option. ERROR_MACHINE_LOCKED
1273 An application-defined callback gave invalid data when called. ERROR_CALLBACK_SUPPLIED_INVALID_DATA
1274 The group policy framework should call the extension in the synchronous foreground policy refresh. ERROR_SYNC_FOREGROUND_REFRESH_REQUIRED
1275 This driver has been blocked from loading. ERROR_DRIVER_BLOCKED
1276 A dynamic link library (DLL) referenced a module that was neither a DLL nor the process's executable image. ERROR_INVALID_IMPORT_OF_NON_DLL
1277 Windows cannot open this program since it has been disabled. ERROR_ACCESS_DISABLED_WEBBLADE
1278 Windows cannot open this program because the license enforcement system has been tampered with or become corrupted. ERROR_ACCESS_DISABLED_WEBBLADE_TAMPER
1279 A transaction recovery failed. ERROR_RECOVERY_FAILURE
1280 The current thread has already been converted to a fiber. ERROR_ALREADY_FIBER
1281 The current thread has already been converted from a fiber. ERROR_ALREADY_THREAD
1282 The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application. ERROR_STACK_BUFFER_OVERRUN
1283 Data present in one of the parameters is more than the function can operate on. ERROR_PARAMETER_QUOTA_EXCEEDED
1284 An attempt to do an operation on a debug object failed because the object is in the process of being deleted. ERROR_DEBUGGER_INACTIVE
1300 Not all privileges referenced are assigned to the caller. ERROR_NOT_ALL_ASSIGNED
1301 Some mapping between account names and security IDs was not done. ERROR_SOME_NOT_MAPPED
1302 No system quota limits are specifically set for this account. ERROR_NO_QUOTAS_FOR_ACCOUNT
1303 No encryption key is available. A well-known encryption key was returned. ERROR_LOCAL_USER_SESSION_KEY
1304 The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string. ERROR_NULL_LM_PASSWORD
1305 The revision level is unknown. ERROR_UNKNOWN_REVISION
1306 Indicates two revision levels are incompatible. ERROR_REVISION_MISMATCH
1307 This security ID may not be assigned as the owner of this object. ERROR_INVALID_OWNER
1308 This security ID may not be assigned as the primary group of an object. ERROR_INVALID_PRIMARY_GROUP
1309 An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client. ERROR_NO_IMPERSONATION_TOKEN
1310 The group may not be disabled. ERROR_CANT_DISABLE_MANDATORY
1311 There are currently no logon servers available to service the logon request. ERROR_NO_LOGON_SERVERS
1312 A specified logon session does not exist. It may already have been terminated. ERROR_NO_SUCH_LOGON_SESSION
1313 A specified privilege does not exist. ERROR_NO_SUCH_PRIVILEGE
1314 A required privilege is not held by the client. ERROR_PRIVILEGE_NOT_HELD
1315 The name provided is not a properly formed account name. ERROR_INVALID_ACCOUNT_NAME
1316 The specified user already exists. ERROR_USER_EXISTS
1317 The specified user does not exist. ERROR_NO_SUCH_USER
1318 The specified group already exists. ERROR_GROUP_EXISTS
1319 The specified group does not exist. ERROR_NO_SUCH_GROUP
1320 Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member. ERROR_MEMBER_IN_GROUP
1321 The specified user account is not a member of the specified group account. ERROR_MEMBER_NOT_IN_GROUP
1322 The last remaining administration account cannot be disabled or deleted. ERROR_LAST_ADMIN
1323 Unable to update the password. The value provided as the current password is incorrect. ERROR_WRONG_PASSWORD
1324 Unable to update the password. The value provided for the new password contains values that are not allowed in passwords. ERROR_ILL_FORMED_PASSWORD
1325 Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirement of the domain. ERROR_PASSWORD_RESTRICTION
1326 Logon failure: unknown user name or bad password. ERROR_LOGON_FAILURE
1327 Logon failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a policy restriction has been enforced. ERROR_ACCOUNT_RESTRICTION
1328 Logon failure: account logon time restriction violation. ERROR_INVALID_LOGON_HOURS
1329 Logon failure: user not allowed to log on to this computer. ERROR_INVALID_WORKSTATION
1330 Logon failure: the specified account password has expired. ERROR_PASSWORD_EXPIRED
1331 Logon failure: account currently disabled. ERROR_ACCOUNT_DISABLED
1332 No mapping between account names and security IDs was done. ERROR_NONE_MAPPED
1333 Too many local user identifiers (LUIDs) were requested at one time. ERROR_TOO_MANY_LUIDS_REQUESTED
1334 No more local user identifiers (LUIDs) are available. ERROR_LUIDS_EXHAUSTED
1335 The subauthority part of a security ID is invalid for this particular use. ERROR_INVALID_SUB_AUTHORITY
1336 The access control list (ACL) structure is invalid. ERROR_INVALID_ACL
1337 The security ID structure is invalid. ERROR_INVALID_SID
1338 The security descriptor structure is invalid. ERROR_INVALID_SECURITY_DESCR
1340 The inherited access control list (ACL) or access control entry (ACE) could not be built. ERROR_BAD_INHERITANCE_ACL
1341 The server is currently disabled. ERROR_SERVER_DISABLED
1342 The server is currently enabled. ERROR_SERVER_NOT_DISABLED
1343 The value provided was an invalid value for an identifier authority. ERROR_INVALID_ID_AUTHORITY
1344 No more memory is available for security information updates. ERROR_ALLOTTED_SPACE_EXCEEDED
1345 The specified attributes are invalid, or incompatible with the attributes for the group as a whole. ERROR_INVALID_GROUP_ATTRIBUTES
1346 Either a required impersonation level was not provided, or the provided impersonation level is invalid. ERROR_BAD_IMPERSONATION_LEVEL
1347 Cannot open an anonymous level security token. ERROR_CANT_OPEN_ANONYMOUS
1348 The validation information class requested was invalid. ERROR_BAD_VALIDATION_CLASS
1349 The type of the token is inappropriate for its attempted use. ERROR_BAD_TOKEN_TYPE
1350 Unable to perform a security operation on an object that has no associated security. ERROR_NO_SECURITY_ON_OBJECT
1351 Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied. ERROR_CANT_ACCESS_DOMAIN_INFO
1352 The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation. ERROR_INVALID_SERVER_STATE
1353 The domain was in the wrong state to perform the security operation. ERROR_INVALID_DOMAIN_STATE
1354 This operation is only allowed for the Primary Domain Controller of the domain. ERROR_INVALID_DOMAIN_ROLE
1355 The specified domain either does not exist or could not be contacted. ERROR_NO_SUCH_DOMAIN
1356 The specified domain already exists. ERROR_DOMAIN_EXISTS
1357 An attempt was made to exceed the limit on the number of domains per server. ERROR_DOMAIN_LIMIT_EXCEEDED
1358 Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk. ERROR_INTERNAL_DB_CORRUPTION
1359 An internal error occurred. ERROR_INTERNAL_ERROR
1360 Generic access types were contained in an access mask which should already be mapped to nongeneric types. ERROR_GENERIC_NOT_MAPPED
1361 A security descriptor is not in the right format (absolute or self-relative). ERROR_BAD_DESCRIPTOR_FORMAT
1362 The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process. ERROR_NOT_LOGON_PROCESS
1363 Cannot start a new logon session with an ID that is already in use. ERROR_LOGON_SESSION_EXISTS
1364 A specified authentication package is unknown. ERROR_NO_SUCH_PACKAGE
1365 The logon session is not in a state that is consistent with the requested operation. ERROR_BAD_LOGON_SESSION_STATE
1366 The logon session ID is already in use. ERROR_LOGON_SESSION_COLLISION
1367 A logon request contained an invalid logon type value. ERROR_INVALID_LOGON_TYPE
1368 Unable to impersonate using a named pipe until data has been read from that pipe. ERROR_CANNOT_IMPERSONATE
1369 The transaction state of a registry subtree is incompatible with the requested operation. ERROR_RXACT_INVALID_STATE
1370 An internal security database corruption has been encountered. ERROR_RXACT_COMMIT_FAILURE
1371 Cannot perform this operation on built-in accounts. ERROR_SPECIAL_ACCOUNT
1372 Cannot perform this operation on this built-in special group. ERROR_SPECIAL_GROUP
1373 Cannot perform this operation on this built-in special user. ERROR_SPECIAL_USER
1374 The user cannot be removed from a group because the group is currently the user's primary group. ERROR_MEMBERS_PRIMARY_GROUP
1375 The token is already in use as a primary token. ERROR_TOKEN_ALREADY_IN_USE
1376 The specified local group does not exist. ERROR_NO_SUCH_ALIAS
1377 The specified account name is not a member of the local group. ERROR_MEMBER_NOT_IN_ALIAS
1378 The specified account name is already a member of the local group. ERROR_MEMBER_IN_ALIAS
1379 The specified local group already exists. ERROR_ALIAS_EXISTS
1380 Logon failure: the user has not been granted the requested logon type at this computer. ERROR_LOGON_NOT_GRANTED
1381 The maximum number of secrets that may be stored in a single system has been exceeded. ERROR_TOO_MANY_SECRETS
1382 The length of a secret exceeds the maximum length allowed. ERROR_SECRET_TOO_LONG
1383 The local security authority database contains an internal inconsistency. ERROR_INTERNAL_DB_ERROR
1384 During a logon attempt, the user's security context accumulated too many security IDs. ERROR_TOO_MANY_CONTEXT_IDS
1385 Logon failure: the user has not been granted the requested logon type at this computer. ERROR_LOGON_TYPE_NOT_GRANTED
1386 A cross-encrypted password is necessary to change a user password. ERROR_NT_CROSS_ENCRYPTION_REQUIRED
1387 A new member could not be added to or removed from the local group because the member does not exist. ERROR_NO_SUCH_MEMBER
1388 A new member could not be added to a local group because the member has the wrong account type. ERROR_INVALID_MEMBER
1389 Too many security IDs have been specified. ERROR_TOO_MANY_SIDS
1390 A cross-encrypted password is necessary to change this user password. ERROR_LM_CROSS_ENCRYPTION_REQUIRED
1391 Indicates an ACL contains no inheritable components. ERROR_NO_INHERITANCE
1392 The file or directory is corrupted and unreadable. ERROR_FILE_CORRUPT
1393 The disk structure is corrupted and unreadable. ERROR_DISK_CORRUPT
1394 There is no user session key for the specified logon session. ERROR_NO_USER_SESSION_KEY
1395 The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept. ERROR_LICENSE_QUOTA_EXCEEDED
1396 Logon Failure: The target account name is incorrect. ERROR_WRONG_TARGET_NAME
1397 Mutual Authentication failed. The server's password is out of date at the domain controller. ERROR_MUTUAL_AUTH_FAILED
1398 There is a time and/or date difference between the client and server. ERROR_TIME_SKEW
1399 This operation cannot be performed on the current domain. ERROR_CURRENT_DOMAIN_NOT_ALLOWED
1400 Invalid window handle. ERROR_INVALID_WINDOW_HANDLE
1401 Invalid menu handle. ERROR_INVALID_MENU_HANDLE
1402 Invalid cursor handle. ERROR_INVALID_CURSOR_HANDLE
1403 Invalid accelerator table handle. ERROR_INVALID_ACCEL_HANDLE
1404 Invalid hook handle. ERROR_INVALID_HOOK_HANDLE
1405 Invalid handle to a multiple-window position structure. ERROR_INVALID_DWP_HANDLE
1406 Cannot create a top-level child window. ERROR_TLW_WITH_WSCHILD
1407 Cannot find window class. ERROR_CANNOT_FIND_WND_CLASS
1408 Invalid window; it belongs to other thread. ERROR_WINDOW_OF_OTHER_THREAD
1409 Hot key is already registered. ERROR_HOTKEY_ALREADY_REGISTERED
1410 Class already exists. ERROR_CLASS_ALREADY_EXISTS
1411 Class does not exist. ERROR_CLASS_DOES_NOT_EXIST
1412 Class still has open windows. ERROR_CLASS_HAS_WINDOWS
1413 Invalid index. ERROR_INVALID_INDEX
1414 Invalid icon handle. ERROR_INVALID_ICON_HANDLE
1415 Using private DIALOG window words. ERROR_PRIVATE_DIALOG_INDEX
1416 The list box identifier was not found. ERROR_LISTBOX_ID_NOT_FOUND
1417 No wildcards were found. ERROR_NO_WILDCARD_CHARACTERS
1418 Thread does not have a clipboard open. ERROR_CLIPBOARD_NOT_OPEN
1419 Hot key is not registered. ERROR_HOTKEY_NOT_REGISTERED
1420 The window is not a valid dialog window. ERROR_WINDOW_NOT_DIALOG
1421 Control ID not found. ERROR_CONTROL_ID_NOT_FOUND
1422 Invalid message for a combo box because it does not have an edit control. ERROR_INVALID_COMBOBOX_MESSAGE
1423 The window is not a combo box. ERROR_WINDOW_NOT_COMBOBOX
1424 Height must be less than 256. ERROR_INVALID_EDIT_HEIGHT
1425 Invalid device context (DC) handle. ERROR_DC_NOT_FOUND
1426 Invalid hook procedure type. ERROR_INVALID_HOOK_FILTER
1427 Invalid hook procedure. ERROR_INVALID_FILTER_PROC
1428 Cannot set nonlocal hook without a module handle. ERROR_HOOK_NEEDS_HMOD
1429 This hook procedure can only be set globally. ERROR_GLOBAL_ONLY_HOOK
1430 The journal hook procedure is already installed. ERROR_JOURNAL_HOOK_SET
1431 The hook procedure is not installed. ERROR_HOOK_NOT_INSTALLED
1432 Invalid message for single-selection list box. ERROR_INVALID_LB_MESSAGE
1433 LB_SETCOUNT sent to non-lazy list box. ERROR_SETCOUNT_ON_BAD_LB
1434 This list box does not support tab stops. ERROR_LB_WITHOUT_TABSTOPS
1435 Cannot destroy object created by another thread. ERROR_DESTROY_OBJECT_OF_OTHER_THREAD
1436 Child windows cannot have menus. ERROR_CHILD_WINDOW_MENU
1437 The window does not have a system menu. ERROR_NO_SYSTEM_MENU
1438 Invalid message box style. ERROR_INVALID_MSGBOX_STYLE
1439 Invalid system-wide (SPI_*) parameter. ERROR_INVALID_SPI_VALUE
1440 Screen already locked. ERROR_SCREEN_ALREADY_LOCKED
1441 All handles to windows in a multiple-window position structure must have the same parent. ERROR_HWNDS_HAVE_DIFF_PARENT
1442 The window is not a child window. ERROR_NOT_CHILD_WINDOW
1443 Invalid GW_* command. ERROR_INVALID_GW_COMMAND
1444 Invalid thread identifier. ERROR_INVALID_THREAD_ID
1445 Cannot process a message from a window that is not a multiple document interface (MDI) window. ERROR_NON_MDICHILD_WINDOW
1446 Popup menu already active. ERROR_POPUP_ALREADY_ACTIVE
1447 The window does not have scroll bars. ERROR_NO_SCROLLBARS
1448 Scroll bar range cannot be greater than MAXLONG. ERROR_INVALID_SCROLLBAR_RANGE
1449 Cannot show or remove the window in the way specified. ERROR_INVALID_SHOWWIN_COMMAND
1450 Insufficient system resources exist to complete the requested service. ERROR_NO_SYSTEM_RESOURCES
1451 Insufficient system resources exist to complete the requested service. ERROR_NONPAGED_SYSTEM_RESOURCES
1452 Insufficient system resources exist to complete the requested service. ERROR_PAGED_SYSTEM_RESOURCES
1453 Insufficient quota to complete the requested service. ERROR_WORKING_SET_QUOTA
1454 Insufficient quota to complete the requested service. ERROR_PAGEFILE_QUOTA
1455 The paging file is too small for this operation to complete. ERROR_COMMITMENT_LIMIT
1456 A menu item was not found. ERROR_MENU_ITEM_NOT_FOUND
1457 Invalid keyboard layout handle. ERROR_INVALID_KEYBOARD_HANDLE
1458 Hook type not allowed. ERROR_HOOK_TYPE_NOT_ALLOWED
1459 This operation requires an interactive window station. ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION
1460 This operation returned because the timeout period expired. ERROR_TIMEOUT
1461 Invalid monitor handle. ERROR_INVALID_MONITOR_HANDLE
1500 The event log file is corrupted. ERROR_EVENTLOG_FILE_CORRUPT
1501 No event log file could be opened, so the event logging service did not start. ERROR_EVENTLOG_CANT_START
1502 The event log file is full. ERROR_LOG_FILE_FULL
1503 The event log file has changed between read operations. ERROR_EVENTLOG_FILE_CHANGED
1601 The Windows Installer service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance. ERROR_INSTALL_SERVICE_FAILURE
1602 User cancelled installation. ERROR_INSTALL_USEREXIT
1603 Fatal error during installation. ERROR_INSTALL_FAILURE
1604 Installation suspended, incomplete. ERROR_INSTALL_SUSPEND
1605 This action is only valid for products that are currently installed. ERROR_UNKNOWN_PRODUCT
1606 Feature ID not registered. ERROR_UNKNOWN_FEATURE
1607 Component ID not registered. ERROR_UNKNOWN_COMPONENT
1608 Unknown property. ERROR_UNKNOWN_PROPERTY
1609 Handle is in an invalid state. ERROR_INVALID_HANDLE_STATE
1610 The configuration data for this product is corrupt. Contact your support personnel. ERROR_BAD_CONFIGURATION
1611 Component qualifier not present. ERROR_INDEX_ABSENT
1612 The installation source for this product is not available. Verify that the source exists and that you can access it. ERROR_INSTALL_SOURCE_ABSENT
1613 This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service. ERROR_INSTALL_PACKAGE_VERSION
1614 Product is uninstalled. ERROR_PRODUCT_UNINSTALLED
1615 SQL query syntax invalid or unsupported. ERROR_BAD_QUERY_SYNTAX
1616 Record field does not exist. ERROR_INVALID_FIELD
1617 The device has been removed. ERROR_DEVICE_REMOVED
1618 Another installation is already in progress. Complete that installation before proceeding with this install. ERROR_INSTALL_ALREADY_RUNNING
1619 This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package. ERROR_INSTALL_PACKAGE_OPEN_FAILED
1620 This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package. ERROR_INSTALL_PACKAGE_INVALID
1621 There was an error starting the Windows Installer service user interface. Contact your support personnel. ERROR_INSTALL_UI_FAILURE
1622 Error opening installation log file. Verify that the specified log file location exists and that you can write to it. ERROR_INSTALL_LOG_FAILURE
1623 The language of this installation package is not supported by your system. ERROR_INSTALL_LANGUAGE_UNSUPPORTED
1624 Error applying transforms. Verify that the specified transform paths are valid. ERROR_INSTALL_TRANSFORM_FAILURE
1625 This installation is forbidden by system policy. Contact your system administrator. ERROR_INSTALL_PACKAGE_REJECTED
1626 Function could not be executed. ERROR_FUNCTION_NOT_CALLED
1627 Function failed during execution. ERROR_FUNCTION_FAILED
1628 Invalid or unknown table specified. ERROR_INVALID_TABLE
1629 Data supplied is of wrong type. ERROR_DATATYPE_MISMATCH
1630 Data of this type is not supported. ERROR_UNSUPPORTED_TYPE
1631 The Windows Installer service failed to start. Contact your support personnel. ERROR_CREATE_FAILED
1632 The Temp folder is on a drive that is full or inaccessible. Free up space on the drive or verify that you have write permission on the Temp folder. ERROR_INSTALL_TEMP_UNWRITABLE
1633 This installation package is not supported by this processor type. Contact your product vendor. ERROR_INSTALL_PLATFORM_UNSUPPORTED
1634 Component not used on this computer. ERROR_INSTALL_NOTUSED
1635 This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package. ERROR_PATCH_PACKAGE_OPEN_FAILED
1636 This patch package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer patch package. ERROR_PATCH_PACKAGE_INVALID
1637 This patch package cannot be processed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service. ERROR_PATCH_PACKAGE_UNSUPPORTED.
1638 Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel. ERROR_PRODUCT_VERSION
1639 Invalid command line argument. Consult the Windows Installer SDK for detailed command line help. ERROR_INVALID_COMMAND_LINE
1640 Only administrators have permission to add, remove, or configure server software during a Terminal Services remote session. If you want to install or configure software on the server, contact your network administrator. ERROR_INSTALL_REMOTE_DISALLOWED
1641 The requested operation completed successfully. The system will be restarted so the changes can take effect. ERROR_SUCCESS_REBOOT_INITIATED
1642 The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch. ERROR_PATCH_TARGET_NOT_FOUND
1643 The patch package is not permitted by software restriction policy. ERROR_PATCH_PACKAGE_REJECTED
1644 One or more customizations are not permitted by software restriction policy. ERROR_INSTALL_TRANSFORM_REJECTED
1645 The Windows Installer does not permit installation from a Remote Desktop Connection. ERROR_INSTALL_REMOTE_PROHIBITED
1700 The string binding is invalid. RPC_S_INVALID_STRING_BINDING
1701 The binding handle is not the correct type. RPC_S_WRONG_KIND_OF_BINDING
1702 The binding handle is invalid. RPC_S_INVALID_BINDING
1703 The RPC protocol sequence is not supported. RPC_S_PROTSEQ_NOT_SUPPORTED
1704 The RPC protocol sequence is invalid. RPC_S_INVALID_RPC_PROTSEQ
1705 The string universal unique identifier (UUID) is invalid. RPC_S_INVALID_STRING_UUID
1706 The endpoint format is invalid. RPC_S_INVALID_ENDPOINT_FORMAT
1707 The network address is invalid. RPC_S_INVALID_NET_ADDR
1708 No endpoint was found. RPC_S_NO_ENDPOINT_FOUND
1709 The timeout value is invalid. RPC_S_INVALID_TIMEOUT
1710 The object universal unique identifier (UUID) was not found. RPC_S_OBJECT_NOT_FOUND
1711 The object universal unique identifier (UUID) has already been registered. RPC_S_ALREADY_REGISTERED
1712 The type universal unique identifier (UUID) has already been registered. RPC_S_TYPE_ALREADY_REGISTERED
1713 The RPC server is already listening. RPC_S_ALREADY_LISTENING
1714 No protocol sequences have been registered. RPC_S_NO_PROTSEQS_REGISTERED
1715 The RPC server is not listening. RPC_S_NOT_LISTENING
1716 The manager type is unknown. RPC_S_UNKNOWN_MGR_TYPE
1717 The interface is unknown. RPC_S_UNKNOWN_IF
1718 There are no bindings. RPC_S_NO_BINDINGS
1719 There are no protocol sequences. RPC_S_NO_PROTSEQS
1720 The endpoint cannot be created. RPC_S_CANT_CREATE_ENDPOINT
1721 Not enough resources are available to complete this operation. RPC_S_OUT_OF_RESOURCES
1722 The RPC server is unavailable. RPC_S_SERVER_UNAVAILABLE
1723 The RPC server is too busy to complete this operation. RPC_S_SERVER_TOO_BUSY
1724 The network options are invalid. RPC_S_INVALID_NETWORK_OPTIONS
1725 There are no remote procedure calls active on this thread. RPC_S_NO_CALL_ACTIVE
1726 The remote procedure call failed. RPC_S_CALL_FAILED
1727 The remote procedure call failed and did not execute. RPC_S_CALL_FAILED_DNE
1728 A remote procedure call (RPC) protocol error occurred. RPC_S_PROTOCOL_ERROR
1730 The transfer syntax is not supported by the RPC server. RPC_S_UNSUPPORTED_TRANS_SYN
1732 The universal unique identifier (UUID) type is not supported. RPC_S_UNSUPPORTED_TYPE
1733 The tag is invalid. RPC_S_INVALID_TAG
1734 The array bounds are invalid. RPC_S_INVALID_BOUND
1735 The binding does not contain an entry name. RPC_S_NO_ENTRY_NAME
1736 The name syntax is invalid. RPC_S_INVALID_NAME_SYNTAX
1737 The name syntax is not supported. RPC_S_UNSUPPORTED_NAME_SYNTAX
1739 No network address is available to use to construct a universal unique identifier (UUID). RPC_S_UUID_NO_ADDRESS
1740 The endpoint is a duplicate. RPC_S_DUPLICATE_ENDPOINT
1741 The authentication type is unknown. RPC_S_UNKNOWN_AUTHN_TYPE
1742 The maximum number of calls is too small. RPC_S_MAX_CALLS_TOO_SMALL
1743 The string is too long. RPC_S_STRING_TOO_LONG
1744 The RPC protocol sequence was not found. RPC_S_PROTSEQ_NOT_FOUND
1745 The procedure number is out of range. RPC_S_PROCNUM_OUT_OF_RANGE
1746 The binding does not contain any authentication information. RPC_S_BINDING_HAS_NO_AUTH
1747 The authentication service is unknown. RPC_S_UNKNOWN_AUTHN_SERVICE
1748 The authentication level is unknown. RPC_S_UNKNOWN_AUTHN_LEVEL
1749 The security context is invalid. RPC_S_INVALID_AUTH_IDENTITY
1750 The authorization service is unknown. RPC_S_UNKNOWN_AUTHZ_SERVICE
1751 The entry is invalid. EPT_S_INVALID_ENTRY
1752 The server endpoint cannot perform the operation. EPT_S_CANT_PERFORM_OP
1753 There are no more endpoints available from the endpoint mapper. EPT_S_NOT_REGISTERED
1754 No interfaces have been exported. RPC_S_NOTHING_TO_EXPORT
1755 The entry name is incomplete. RPC_S_INCOMPLETE_NAME
1756 The version option is invalid. RPC_S_INVALID_VERS_OPTION
1757 There are no more members. RPC_S_NO_MORE_MEMBERS
1758 There is nothing to unexport. RPC_S_NOT_ALL_OBJS_UNEXPORTED
1759 The interface was not found. RPC_S_INTERFACE_NOT_FOUND
1760 The entry already exists. RPC_S_ENTRY_ALREADY_EXISTS
1761 The entry is not found. RPC_S_ENTRY_NOT_FOUND
1762 The name service is unavailable. RPC_S_NAME_SERVICE_UNAVAILABLE
1763 The network address family is invalid. RPC_S_INVALID_NAF_ID
1764 The requested operation is not supported. RPC_S_CANNOT_SUPPORT
1765 No security context is available to allow impersonation. RPC_S_NO_CONTEXT_AVAILABLE
1766 An internal error occurred in a remote procedure call (RPC). RPC_S_INTERNAL_ERROR
1767 The RPC server attempted an integer division by zero. RPC_S_ZERO_DIVIDE
1768 An addressing error occurred in the RPC server. RPC_S_ADDRESS_ERROR
1769 A floating-point operation at the RPC server caused a division by zero. RPC_S_FP_DIV_ZERO
1770 A floating-point underflow occurred at the RPC server. RPC_S_FP_UNDERFLOW
1771 A floating-point overflow occurred at the RPC server. RPC_S_FP_OVERFLOW
1772 The list of RPC servers available for the binding of auto handles has been exhausted. RPC_X_NO_MORE_ENTRIES
1773 Unable to open the character translation table file. RPC_X_SS_CHAR_TRANS_OPEN_FAIL
1774 The file containing the character translation table has fewer than 512 bytes. RPC_X_SS_CHAR_TRANS_SHORT_FILE
1775 A null context handle was passed from the client to the host during a remote procedure call. RPC_X_SS_IN_NULL_CONTEXT
1777 The context handle changed during a remote procedure call. RPC_X_SS_CONTEXT_DAMAGED
1778 The binding handles passed to a remote procedure call do not match. RPC_X_SS_HANDLES_MISMATCH
1779 The stub is unable to get the remote procedure call handle. RPC_X_SS_CANNOT_GET_CALL_HANDLE
1780 A null reference pointer was passed to the stub. RPC_X_NULL_REF_POINTER
1781 The enumeration value is out of range. RPC_X_ENUM_VALUE_OUT_OF_RANGE
1782 The byte count is too small. RPC_X_BYTE_COUNT_TOO_SMALL
1783 The stub received bad data. RPC_X_BAD_STUB_DATA
1784 The supplied user buffer is not valid for the requested operation. ERROR_INVALID_USER_BUFFER
1785 The disk media is not recognized. It may not be formatted. ERROR_UNRECOGNIZED_MEDIA
1786 The workstation does not have a trust secret. ERROR_NO_TRUST_LSA_SECRET
1787 The security database on the server does not have a computer account for this workstation trust relationship. ERROR_NO_TRUST_SAM_ACCOUNT
1788 The trust relationship between the primary domain and the trusted domain failed. ERROR_TRUSTED_DOMAIN_FAILURE
1789 The trust relationship between this workstation and the primary domain failed. ERROR_TRUSTED_RELATIONSHIP_FAILURE
1790 The network logon failed. ERROR_TRUST_FAILURE
1791 A remote procedure call is already in progress for this thread. RPC_S_CALL_IN_PROGRESS
1792 An attempt was made to logon, but the network logon service was not started. ERROR_NETLOGON_NOT_STARTED
1793 The user's account has expired. ERROR_ACCOUNT_EXPIRED
1794 The redirector is in use and cannot be unloaded. ERROR_REDIRECTOR_HAS_OPEN_HANDLES
1795 The specified printer driver is already installed. ERROR_PRINTER_DRIVER_ALREADY_INSTALLED
1796 The specified port is unknown. ERROR_UNKNOWN_PORT
1797 The printer driver is unknown. ERROR_UNKNOWN_PRINTER_DRIVER
1798 The print processor is unknown. ERROR_UNKNOWN_PRINTPROCESSOR
1799 The specified separator file is invalid. ERROR_INVALID_SEPARATOR_FILE
1800 The specified priority is invalid. ERROR_INVALID_PRIORITY
1801 The printer name is invalid. ERROR_INVALID_PRINTER_NAME
1802 The printer already exists. ERROR_PRINTER_ALREADY_EXISTS
1803 The printer command is invalid. ERROR_INVALID_PRINTER_COMMAND
1804 The specified datatype is invalid. ERROR_INVALID_DATATYPE
1805 The environment specified is invalid. ERROR_INVALID_ENVIRONMENT
1806 There are no more bindings. RPC_S_NO_MORE_BINDINGS
1807 The account used is an interdomain trust account. Use your global user account or local user account to access this server. ERROR_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT
1808 The account used is a computer account. Use your global user account or local user account to access this server. ERROR_NOLOGON_WORKSTATION_TRUST_ACCOUNT
1809 The account used is a server trust account. Use your global user account or local user account to access this server. ERROR_NOLOGON_SERVER_TRUST_ACCOUNT
1810 The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain. ERROR_DOMAIN_TRUST_INCONSISTENT
1811 The server is in use and cannot be unloaded. ERROR_SERVER_HAS_OPEN_HANDLES
1812 The specified image file did not contain a resource section. ERROR_RESOURCE_DATA_NOT_FOUND
1813 The specified resource type cannot be found in the image file. ERROR_RESOURCE_TYPE_NOT_FOUND
1814 The specified resource name cannot be found in the image file. ERROR_RESOURCE_NAME_NOT_FOUND
1815 The specified resource language ID cannot be found in the image file. ERROR_RESOURCE_LANG_NOT_FOUND
1816 Not enough quota is available to process this command. ERROR_NOT_ENOUGH_QUOTA
1817 No interfaces have been registered. RPC_S_NO_INTERFACES
1818 The remote procedure call was cancelled. RPC_S_CALL_CANCELLED
1819 The binding handle does not contain all required information. RPC_S_BINDING_INCOMPLETE
1820 A communications failure occurred during a remote procedure call. RPC_S_COMM_FAILURE
1821 The requested authentication level is not supported. RPC_S_UNSUPPORTED_AUTHN_LEVEL
1822 No principal name registered. RPC_S_NO_PRINC_NAME
1823 The error specified is not a valid Windows RPC error code. RPC_S_NOT_RPC_ERROR
1824 A UUID that is valid only on this computer has been allocated. RPC_S_UUID_LOCAL_ONLY
1825 A security package specific error occurred. RPC_S_SEC_PKG_ERROR
1826 Thread is not canceled. RPC_S_NOT_CANCELLED
1827 Invalid operation on the encoding/decoding handle. RPC_X_INVALID_ES_ACTION
1828 Incompatible version of the serializing package. RPC_X_WRONG_ES_VERSION
1829 Incompatible version of the RPC stub. RPC_X_WRONG_STUB_VERSION
1830 The RPC pipe object is invalid or corrupted. RPC_X_INVALID_PIPE_OBJECT
1831 An invalid operation was attempted on an RPC pipe object. RPC_X_WRONG_PIPE_ORDER
1832 Unsupported RPC pipe version. RPC_X_WRONG_PIPE_VERSION
1898 The group member was not found. RPC_S_GROUP_MEMBER_NOT_FOUND
1899 The endpoint mapper database entry could not be created. EPT_S_CANT_CREATE
1900 The object universal unique identifier (UUID) is the nil UUID. RPC_S_INVALID_OBJECT
1901 The specified time is invalid. ERROR_INVALID_TIME
1902 The specified form name is invalid. ERROR_INVALID_FORM_NAME
1903 The specified form size is invalid. ERROR_INVALID_FORM_SIZE
1904 The specified printer handle is already being waited on ERROR_ALREADY_WAITING
1905 The specified printer has been deleted. ERROR_PRINTER_DELETED
1906 The state of the printer is invalid. ERROR_INVALID_PRINTER_STATE
1907 The user's password must be changed before logging on the first time. ERROR_PASSWORD_MUST_CHANGE
1908 Could not find the domain controller for this domain. ERROR_DOMAIN_CONTROLLER_NOT_FOUND
1909 The referenced account is currently locked out and may not be logged on to. ERROR_ACCOUNT_LOCKED_OUT
1910 The object exporter specified was not found. OR_INVALID_OXID
1911 The object specified was not found. OR_INVALID_OID
1912 The object resolver set specified was not found. OR_INVALID_SET
1913 Some data remains to be sent in the request buffer. RPC_S_SEND_INCOMPLETE
1914 Invalid asynchronous remote procedure call handle. RPC_S_INVALID_ASYNC_HANDLE
1915 Invalid asynchronous RPC call handle for this operation. RPC_S_INVALID_ASYNC_CALL
1916 The RPC pipe object has already been closed. RPC_X_PIPE_CLOSED
1917 The RPC call completed before all pipes were processed. RPC_X_PIPE_DISCIPLINE_ERROR
1918 No more data is available from the RPC pipe. RPC_X_PIPE_EMPTY
1919 No site name is available for this machine. ERROR_NO_SITENAME
1920 The file cannot be accessed by the system. ERROR_CANT_ACCESS_FILE
1921 The name of the file cannot be resolved by the system. ERROR_CANT_RESOLVE_FILENAME
1922 The entry is not of the expected type. RPC_S_ENTRY_TYPE_MISMATCH
1923 Not all object UUIDs could be exported to the specified entry. RPC_S_NOT_ALL_OBJS_EXPORTED
1924 Interface could not be exported to the specified entry. RPC_S_INTERFACE_NOT_EXPORTED
1925 The specified profile entry could not be added. RPC_S_PROFILE_NOT_ADDED
1926 The specified profile element could not be added. RPC_S_PRF_ELT_NOT_ADDED
1927 The specified profile element could not be removed. RPC_S_PRF_ELT_NOT_REMOVED
1928 The group element could not be added. RPC_S_GRP_ELT_NOT_ADDED
1929 The group element could not be removed. RPC_S_GRP_ELT_NOT_REMOVED
1930 The printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers. ERROR_KM_DRIVER_BLOCKED
1931 The context has expired and can no longer be used. ERROR_CONTEXT_EXPIRED.
1932 The current user's delegated trust creation quota has been exceeded. ERROR_PER_USER_TRUST_QUOTA_EXCEEDED
1933 The total delegated trust creation quota has been exceeded. ERROR_ALL_USER_TRUST_QUOTA_EXCEEDED
1934 The current user's delegated trust deletion quota has been exceeded. ERROR_USER_DELETE_TRUST_QUOTA_EXCEEDED
2000 The pixel format is invalid. ERROR_INVALID_PIXEL_FORMAT
2001 The specified driver is invalid. ERROR_BAD_DRIVER
2002 The window style or class attribute is invalid for this operation. ERROR_INVALID_WINDOW_STYLE
2003 The requested metafile operation is not supported. ERROR_METAFILE_NOT_SUPPORTED
2004 The requested transformation operation is not supported. ERROR_TRANSFORM_NOT_SUPPORTED
2005 The requested clipping operation is not supported. ERROR_CLIPPING_NOT_SUPPORTED
2010 The specified color management module is invalid. ERROR_INVALID_CMM
2011 The specified color profile is invalid. ERROR_INVALID_PROFILE
2012 The specified tag was not found. ERROR_TAG_NOT_FOUND
2013 A required tag is not present. ERROR_TAG_NOT_PRESENT
2014 The specified tag is already present. ERROR_DUPLICATE_TAG
2015 The specified color profile is not associated with any device. ERROR_PROFILE_NOT_ASSOCIATED_WITH_DEVICE
2016 The specified color profile was not found. ERROR_PROFILE_NOT_FOUND
2017 The specified color space is invalid. ERROR_INVALID_COLORSPACE
2018 Image Color Management is not enabled. ERROR_ICM_NOT_ENABLED
2019 There was an error while deleting the color transform. ERROR_DELETING_ICM_XFORM
2020 The specified color transform is invalid. ERROR_INVALID_TRANSFORM
2021 The specified transform does not match the bitmap's color space. ERROR_COLORSPACE_MISMATCH
2022 The specified named color index is not present in the profile. ERROR_INVALID_COLORINDEX
2108 The network connection was made successfully, but the user had to be prompted for a password other than the one originally specified. ERROR_CONNECTED_OTHER_PASSWORD
2109 The network connection was made successfully using default credentials. ERROR_CONNECTED_OTHER_PASSWORD_DEFAULT
2202 The specified username is invalid. ERROR_BAD_USERNAME
2250 This network connection does not exist. ERROR_NOT_CONNECTED
2401 This network connection has files open or requests pending. ERROR_OPEN_FILES
2402 Active connections still exist. ERROR_ACTIVE_CONNECTIONS
2404 The device is in use by an active process and cannot be disconnected. ERROR_DEVICE_IN_USE
3000 The specified print monitor is unknown. ERROR_UNKNOWN_PRINT_MONITOR
3001 The specified printer driver is currently in use. ERROR_PRINTER_DRIVER_IN_USE
3002 The spool file was not found. ERROR_SPOOL_FILE_NOT_FOUND
3003 A StartDocPrinter call was not issued. ERROR_SPL_NO_STARTDOC
3004 An AddJob call was not issued. ERROR_SPL_NO_ADDJOB
3005 The specified print processor has already been installed. ERROR_PRINT_PROCESSOR_ALREADY_INSTALLED
3006 The specified print monitor has already been installed. ERROR_PRINT_MONITOR_ALREADY_INSTALLED
3007 The specified print monitor does not have the required functions. ERROR_INVALID_PRINT_MONITOR
3008 The specified print monitor is currently in use. ERROR_PRINT_MONITOR_IN_USE
3009 The requested operation is not allowed when there are jobs queued to the printer. ERROR_PRINTER_HAS_JOBS_QUEUED
3010 The requested operation is successful. Changes will not be effective until the system is rebooted. ERROR_SUCCESS_REBOOT_REQUIRED
3011 The requested operation is successful. Changes will not be effective until the service is restarted. ERROR_SUCCESS_RESTART_REQUIRED
3012 No printers were found. ERROR_PRINTER_NOT_FOUND
3013 The printer driver is known to be unreliable. ERROR_PRINTER_DRIVER_WARNED
3014 The printer driver is known to harm the system. ERROR_PRINTER_DRIVER_BLOCKED
4000 WINS encountered an error while processing the command. ERROR_WINS_INTERNAL
4001 The local WINS cannot be deleted. ERROR_CAN_NOT_DEL_LOCAL_WINS
4002 The importation from the file failed. ERROR_STATIC_INIT
4003 The backup failed. Was a full backup done before? ERROR_INC_BACKUP
4004 The backup failed. Check the directory to which you are backing the database. ERROR_FULL_BACKUP
4005 The name does not exist in the WINS database. ERROR_REC_NON_EXISTENT
4006 Replication with a nonconfigured partner is not allowed. ERROR_RPL_NOT_ALLOWED
4100 The DHCP client has obtained an IP address that is already in use on the network. The local interface will be disabled until the DHCP client can obtain a new address. ERROR_DHCP_ADDRESS_CONFLICT
4200 The GUID passed was not recognized as valid by a WMI data provider. ERROR_WMI_GUID_NOT_FOUND
4201 The instance name passed was not recognized as valid by a WMI data provider. ERROR_WMI_INSTANCE_NOT_FOUND
4202 The data item ID passed was not recognized as valid by a WMI data provider. ERROR_WMI_ITEMID_NOT_FOUND
4203 The WMI request could not be completed and should be retried. ERROR_WMI_TRY_AGAIN
4204 The WMI data provider could not be located. ERROR_WMI_DP_NOT_FOUND
4205 The WMI data provider references an instance set that has not been registered. ERROR_WMI_UNRESOLVED_INSTANCE_REF
4206 The WMI data block or event notification has already been enabled. ERROR_WMI_ALREADY_ENABLED
4207 The WMI data block is no longer available. ERROR_WMI_GUID_DISCONNECTED
4208 The WMI data service is not available. ERROR_WMI_SERVER_UNAVAILABLE
4209 The WMI data provider failed to carry out the request. ERROR_WMI_DP_FAILED
4210 The WMI MOF information is not valid. ERROR_WMI_INVALID_MOF
4211 The WMI registration information is not valid. ERROR_WMI_INVALID_REGINFO
4212 The WMI data block or event notification has already been disabled. ERROR_WMI_ALREADY_DISABLED
4213 The WMI data item or data block is read only. ERROR_WMI_READ_ONLY
4214 The WMI data item or data block could not be changed. ERROR_WMI_SET_FAILURE
4300 The media identifier does not represent a valid medium. ERROR_INVALID_MEDIA
4301 The library identifier does not represent a valid library. ERROR_INVALID_LIBRARY
4302 The media pool identifier does not represent a valid media pool. ERROR_INVALID_MEDIA_POOL
4303 The drive and medium are not compatible or exist in different libraries. ERROR_DRIVE_MEDIA_MISMATCH
4304 The medium currently exists in an offline library and must be online to perform this operation. ERROR_MEDIA_OFFLINE
4305 The operation cannot be performed on an offline library. ERROR_LIBRARY_OFFLINE
4306 The library, drive, or media pool is empty. ERROR_EMPTY
4307 The library, drive, or media pool must be empty to perform this operation. ERROR_NOT_EMPTY
4308 No media is currently available in this media pool or library. ERROR_MEDIA_UNAVAILABLE
4309 A resource required for this operation is disabled. ERROR_RESOURCE_DISABLED
4310 The media identifier does not represent a valid cleaner. ERROR_INVALID_CLEANER
4311 The drive cannot be cleaned or does not support cleaning. ERROR_UNABLE_TO_CLEAN
4312 The object identifier does not represent a valid object. ERROR_OBJECT_NOT_FOUND
4313 Unable to read from or write to the database. ERROR_DATABASE_FAILURE
4314 The database is full. ERROR_DATABASE_FULL
4315 The medium is not compatible with the device or media pool. ERROR_MEDIA_INCOMPATIBLE
4316 The resource required for this operation does not exist. ERROR_RESOURCE_NOT_PRESENT
4317 The operation identifier is not valid. ERROR_INVALID_OPERATION
4318 The media is not mounted or ready for use. ERROR_MEDIA_NOT_AVAILABLE
4319 The device is not ready for use. ERROR_DEVICE_NOT_AVAILABLE
4320 The operator or administrator has refused the request. ERROR_REQUEST_REFUSED
4321 The drive identifier does not represent a valid drive. ERROR_INVALID_DRIVE_OBJECT
4322 Library is full. No slot is available for use. ERROR_LIBRARY_FULL
4323 The transport cannot access the medium. ERROR_MEDIUM_NOT_ACCESSIBLE
4324 Unable to load the medium into the drive. ERROR_UNABLE_TO_LOAD_MEDIUM
4325 Unable to retrieve status about the drive. ERROR_UNABLE_TO_INVENTORY_DRIVE
4326 Unable to retrieve status about the slot. ERROR_UNABLE_TO_INVENTORY_SLOT
4327 Unable to retrieve status about the transport. ERROR_UNABLE_TO_INVENTORY_TRANSPORT
4328 Cannot use the transport because it is already in use. ERROR_TRANSPORT_FULL
4329 Unable to open or close the inject/eject port. ERROR_CONTROLLING_IEPORT
4330 Unable to eject the media because it is in a drive. ERROR_UNABLE_TO_EJECT_MOUNTED_MEDIA
4331 A cleaner slot is already reserved. ERROR_CLEANER_SLOT_SET
4332 A cleaner slot is not reserved. ERROR_CLEANER_SLOT_NOT_SET
4333 The cleaner cartridge has performed the maximum number of drive cleanings. ERROR_CLEANER_CARTRIDGE_SPENT
4334 Unexpected on-medium identifier. ERROR_UNEXPECTED_OMID
4335 The last remaining item in this group or resource cannot be deleted. ERROR_CANT_DELETE_LAST_ITEM
4336 The message provided exceeds the maximum size allowed for this parameter. ERROR_MESSAGE_EXCEEDS_MAX_SIZE
4337 The volume contains system or paging files. ERROR_VOLUME_CONTAINS_SYS_FILES
4338 The media type cannot be removed from this library since at least one drive in the library reports it can support this media type. ERROR_INDIGENOUS_TYPE
4339 This offline media cannot be mounted on this system since no enabled drives are present which can be used. ERROR_NO_SUPPORTING_DRIVES
4340 A cleaner cartridge is present in the tape library. ERROR_CLEANER_CARTRIDGE_INSTALLED
4350 The remote storage service was not able to recall the file. ERROR_FILE_OFFLINE
4351 The remote storage service is not operational at this time. ERROR_REMOTE_STORAGE_NOT_ACTIVE
4352 The remote storage service encountered a media error. ERROR_REMOTE_STORAGE_MEDIA_ERROR
4390 The file or directory is not a reparse point. ERROR_NOT_A_REPARSE_POINT
4391 The reparse point attribute cannot be set because it conflicts with an existing attribute. ERROR_REPARSE_ATTRIBUTE_CONFLICT
4392 The data present in the reparse point buffer is invalid. ERROR_INVALID_REPARSE_DATA
4393 The tag present in the reparse point buffer is invalid. ERROR_REPARSE_TAG_INVALID
4394 There is a mismatch between the tag specified in the request and the tag present in the reparse point. ERROR_REPARSE_TAG_MISMATCH
4500 Single Instance Storage is not available on this volume. ERROR_VOLUME_NOT_SIS_ENABLED
5001 The cluster resource cannot be moved to another group because other resources are dependent on it. ERROR_DEPENDENT_RESOURCE_EXISTS
5002 The cluster resource dependency cannot be found. ERROR_DEPENDENCY_NOT_FOUND
5003 The cluster resource cannot be made dependent on the specified resource because it is already dependent. ERROR_DEPENDENCY_ALREADY_EXISTS
5004 The cluster resource is not online. ERROR_RESOURCE_NOT_ONLINE
5005 A cluster node is not available for this operation. ERROR_HOST_NODE_NOT_AVAILABLE
5006 The cluster resource is not available. ERROR_RESOURCE_NOT_AVAILABLE
5007 The cluster resource could not be found. ERROR_RESOURCE_NOT_FOUND
5008 The cluster is being shut down. ERROR_SHUTDOWN_CLUSTER
5009 A cluster node cannot be evicted from the cluster unless the node is down. ERROR_CANT_EVICT_ACTIVE_NODE
5010 The object already exists. ERROR_OBJECT_ALREADY_EXISTS
5011 The object is already in the list. ERROR_OBJECT_IN_LIST
5012 The cluster group is not available for any new requests. ERROR_GROUP_NOT_AVAILABLE
5013 The cluster group could not be found. ERROR_GROUP_NOT_FOUND
5014 The operation could not be completed because the cluster group is not online. ERROR_GROUP_NOT_ONLINE
5015 The cluster node is not the owner of the resource. ERROR_HOST_NODE_NOT_RESOURCE_OWNER
5016 The cluster node is not the owner of the group. ERROR_HOST_NODE_NOT_GROUP_OWNER
5017 The cluster resource could not be created in the specified resource monitor. ERROR_RESMON_CREATE_FAILED
5018 The cluster resource could not be brought online by the resource monitor. ERROR_RESMON_ONLINE_FAILED
5019 The operation could not be completed because the cluster resource is online. ERROR_RESOURCE_ONLINE
5020 The cluster resource could not be deleted or brought offline because it is the quorum resource. ERROR_QUORUM_RESOURCE
5021 The cluster could not make the specified resource a quorum resource because it is not capable of being a quorum resource. ERROR_NOT_QUORUM_CAPABLE
5022 The cluster software is shutting down. ERROR_CLUSTER_SHUTTING_DOWN
5023 The group or resource is not in the correct state to perform the requested operation. ERROR_INVALID_STATE
5024 The properties were stored but not all changes will take effect until the next time the resource is brought online. ERROR_RESOURCE_PROPERTIES_STORED
5025 The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class. ERROR_NOT_QUORUM_CLASS
5026 The cluster resource could not be deleted since it is a core resource. ERROR_CORE_RESOURCE
5027 The quorum resource failed to come online. ERROR_QUORUM_RESOURCE_ONLINE_FAILED
5028 The quorum log could not be created or mounted successfully. ERROR_QUORUMLOG_OPEN_FAILED
5029 The cluster log is corrupt. ERROR_CLUSTERLOG_CORRUPT
5030 The record could not be written to the cluster log since it exceeds the maximum size. ERROR_CLUSTERLOG_RECORD_EXCEEDS_MAXSIZE
5031 The cluster log exceeds its maximum size. ERROR_CLUSTERLOG_EXCEEDS_MAXSIZE
5032 No checkpoint record was found in the cluster log. ERROR_CLUSTERLOG_CHKPOINT_NOT_FOUND
5033 The minimum required disk space needed for logging is not available. ERROR_CLUSTERLOG_NOT_ENOUGH_SPACE
5034 The cluster node failed to take control of the quorum resource because the resource is owned by another active node. ERROR_QUORUM_OWNER_ALIVE
5035 A cluster network is not available for this operation. ERROR_NETWORK_NOT_AVAILABLE
5036 A cluster node is not available for this operation. ERROR_NODE_NOT_AVAILABLE
5037 All cluster nodes must be running to perform this operation. ERROR_ALL_NODES_NOT_AVAILABLE
5038 A cluster resource failed. ERROR_RESOURCE_FAILED
5039 The cluster node is not valid. ERROR_CLUSTER_INVALID_NODE
5040 The cluster node already exists. ERROR_CLUSTER_NODE_EXISTS
5041 A node is in the process of joining the cluster. ERROR_CLUSTER_JOIN_IN_PROGRESS
5042 The cluster node was not found. ERROR_CLUSTER_NODE_NOT_FOUND
5043 The cluster local node information was not found. ERROR_CLUSTER_LOCAL_NODE_NOT_FOUND
5044 The cluster network already exists. ERROR_CLUSTER_NETWORK_EXISTS
5045 The cluster network was not found. ERROR_CLUSTER_NETWORK_NOT_FOUND
5046 The cluster network interface already exists. ERROR_CLUSTER_NETINTERFACE_EXISTS
5047 The cluster network interface was not found. ERROR_CLUSTER_NETINTERFACE_NOT_FOUND
5048 The cluster request is not valid for this object. ERROR_CLUSTER_INVALID_REQUEST
5049 The cluster network provider is not valid. ERROR_CLUSTER_INVALID_NETWORK_PROVIDER
5050 The cluster node is down. ERROR_CLUSTER_NODE_DOWN
5051 The cluster node is not reachable. ERROR_CLUSTER_NODE_UNREACHABLE
5052 The cluster node is not a member of the cluster. ERROR_CLUSTER_NODE_NOT_MEMBER
5053 A cluster join operation is not in progress. ERROR_CLUSTER_JOIN_NOT_IN_PROGRESS
5054 The cluster network is not valid. ERROR_CLUSTER_INVALID_NETWORK
5056 The cluster node is up. ERROR_CLUSTER_NODE_UP
5057 The cluster IP address is already in use. ERROR_CLUSTER_IPADDR_IN_USE
5058 The cluster node is not paused. ERROR_CLUSTER_NODE_NOT_PAUSED
5059 No cluster security context is available. ERROR_CLUSTER_NO_SECURITY_CONTEXT
5060 The cluster network is not configured for internal cluster communication. ERROR_CLUSTER_NETWORK_NOT_INTERNAL
5061 The cluster node is already up. ERROR_CLUSTER_NODE_ALREADY_UP
5062 The cluster node is already down. ERROR_CLUSTER_NODE_ALREADY_DOWN
5063 The cluster network is already online. ERROR_CLUSTER_NETWORK_ALREADY_ONLINE
5064 The cluster network is already offline. ERROR_CLUSTER_NETWORK_ALREADY_OFFLINE
5065 The cluster node is already a member of the cluster. ERROR_CLUSTER_NODE_ALREADY_MEMBER
5066 The cluster network is the only one configured for internal cluster communication between two or more active cluster nodes. The internal communication capability cannot be removed from the network. ERROR_CLUSTER_LAST_INTERNAL_NETWORK
5067 One or more cluster resources depend on the network to provide service to clients. The client access capability cannot be removed from the network. ERROR_CLUSTER_NETWORK_HAS_DEPENDENTS
5068 This operation cannot be performed on the cluster resource as it the quorum resource. You may not bring the quorum resource offline or modify its possible owners list. ERROR_INVALID_OPERATION_ON_QUORUM
5069 The cluster quorum resource is not allowed to have any dependencies. ERROR_DEPENDENCY_NOT_ALLOWED
5070 The cluster node is paused. ERROR_CLUSTER_NODE_PAUSED
5071 The cluster resource cannot be brought online. The owner node cannot run this resource. ERROR_NODE_CANT_HOST_RESOURCE
5072 The cluster node is not ready to perform the requested operation. ERROR_CLUSTER_NODE_NOT_READY
5073 The cluster node is shutting down. ERROR_CLUSTER_NODE_SHUTTING_DOWN
5074 The cluster join operation was aborted. ERROR_CLUSTER_JOIN_ABORTED
5075 The cluster join operation failed due to incompatible software versions between the joining node and its sponsor. ERROR_CLUSTER_INCOMPATIBLE_VERSIONS
5076 This resource cannot be created because the cluster has reached the limit on the number of resources it can monitor. ERROR_CLUSTER_MAXNUM_OF_RESOURCES_EXCEEDED
5077 The system configuration changed during the cluster join or form operation. The join or form operation was aborted. ERROR_CLUSTER_SYSTEM_CONFIG_CHANGED
5078 The specified resource type was not found. ERROR_CLUSTER_RESOURCE_TYPE_NOT_FOUND
5079 The specified node does not support a resource of this type. This may be due to version inconsistencies or due to the absence of the resource DLL on this node. ERROR_CLUSTER_RESTYPE_NOT_SUPPORTED
5080 The specified resource name is supported by this resource DLL. This may be due to a bad (or changed) name supplied to the resource DLL. ERROR_CLUSTER_RESNAME_NOT_FOUND
5081 No authentication package could be registered with the RPC server. ERROR_CLUSTER_NO_RPC_PACKAGES_REGISTERED
5082 You cannot bring the group online because the owner of the group is not in the preferred list for the group. To change the owner node for the group, move the group. ERROR_CLUSTER_OWNER_NOT_IN_PREFLIST
5083 The join operation failed because the cluster database sequence number has changed or is incompatible with the locker node. This may happen during a join operation if the cluster database was changing during the join. ERROR_CLUSTER_DATABASE_SEQMISMATCH
5084 The resource monitor will not allow the fail operation to be performed while the resource is in its current state. This may happen if the resource is in a pending state. ERROR_RESMON_INVALID_STATE
5085 A non locker code got a request to reserve the lock for making global updates. ERROR_CLUSTER_GUM_NOT_LOCKER
5086 The quorum disk could not be located by the cluster service. ERROR_QUORUM_DISK_NOT_FOUND
5087 The backup up cluster database is possibly corrupt. ERROR_DATABASE_BACKUP_CORRUPT
5088 A DFS root already exists in this cluster node. ERROR_CLUSTER_NODE_ALREADY_HAS_DFS_ROOT
5089 An attempt to modify a resource property failed because it conflicts with another existing property. ERROR_RESOURCE_PROPERTY_UNCHANGEABLE
5890 An operation was attempted that is incompatible with the current membership state of the node. ERROR_CLUSTER_MEMBERSHIP_INVALID_STATE
5891 The quorum resource does not contain the quorum log. ERROR_CLUSTER_QUORUMLOG_NOT_FOUND
5892 The membership engine requested shutdown of the cluster service on this node. ERROR_CLUSTER_MEMBERSHIP_HALT
5893 The join operation failed because the cluster instance ID of the joining node does not match the cluster instance ID of the sponsor node. ERROR_CLUSTER_INSTANCE_ID_MISMATCH
5894 A matching network for the specified IP address could not be found. Please also specify a subnet mask and a cluster network. ERROR_CLUSTER_NETWORK_NOT_FOUND_FOR_IP
5895 The actual data type of the property did not match the expected data type of the property. ERROR_CLUSTER_PROPERTY_DATA_TYPE_MISMATCH
5896 The cluster node was evicted from the cluster successfully, but the node was not cleaned up. Extended status information explaining why the node was not cleaned up is available. ERROR_CLUSTER_EVICT_WITHOUT_CLEANUP
5897 Two or more parameter values specified for a resource's properties are in conflict. ERROR_CLUSTER_PARAMETER_MISMATCH
5898 This computer cannot be made a member of a cluster. ERROR_NODE_CANNOT_BE_CLUSTERED
5899 This computer cannot be made a member of a cluster because it does not have the correct version of Windows installed. ERROR_CLUSTER_WRONG_OS_VERSION
5900 A cluster cannot be created with the specified cluster name because that cluster name is already in use. Specify a different name for the cluster. ERROR_CLUSTER_CANT_CREATE_DUP_CLUSTER_NAME
5901 The cluster configuration action has already been committed. ERROR_CLUSCFG_ALREADY_COMMITTED
5902 The cluster configuration action could not be rolled back. ERROR_CLUSCFG_ROLLBACK_FAILED
5903 The drive letter assigned to a system disk on one node conflicted with the driver letter assigned to a disk on another node. ERROR_CLUSCFG_SYSTEM_DISK_DRIVE_LETTER_CONFLICT
5904 One or more nodes in the cluster are running a version of Windows that does not support this operation. ERROR_CLUSTER_OLD_VERSION
5905 The name of the corresponding computer account doesn't match the Network Name for this resource. ERROR_CLUSTER_MISMATCHED_COMPUTER_ACCT_NAME
6000 The specified file could not be encrypted. ERROR_ENCRYPTION_FAILED
6001 The specified file could not be decrypted. ERROR_DECRYPTION_FAILED
6002 The specified file is encrypted and the user does not have the ability to decrypt it. ERROR_FILE_ENCRYPTED
6003 There is no valid encryption recovery policy configured for this system. ERROR_NO_RECOVERY_POLICY
6004 The required encryption driver is not loaded for this system. ERROR_NO_EFS
6005 The file was encrypted with a different encryption driver than is currently loaded. ERROR_WRONG_EFS
6006 There are no EFS keys defined for the user. ERROR_NO_USER_KEYS
6007 The specified file is not encrypted. ERROR_FILE_NOT_ENCRYPTED
6008 The specified file is not in the defined EFS export format. ERROR_NOT_EXPORT_FORMAT
6009 The specified file is read only. ERROR_FILE_READ_ONLY
6010 The directory has been disabled for encryption. ERROR_DIR_EFS_DISALLOWED
6011 The server is not trusted for remote encryption operation. ERROR_EFS_SERVER_NOT_TRUSTED
6012 Recovery policy configured for this system contains invalid recovery certificate. ERROR_BAD_RECOVERY_POLICY
6013 The encryption algorithm used on the source file needs a bigger key buffer than the one on the destination file. ERROR_EFS_ALG_BLOB_TOO_BIG
6014 The disk partition does not support file encryption. ERROR_VOLUME_NOT_SUPPORT_EFS
6015 This machine is disabled for file encryption. ERROR_EFS_DISABLED
6016 A newer system is required to decrypt this encrypted file. ERROR_EFS_VERSION_NOT_SUPPORT
6118 The list of servers for this workgroup is not currently available. ERROR_NO_BROWSER_SERVERS_FOUND
6200 The Task Scheduler service must be configured to run in the System account to function properly. Individual tasks may be configured to run in other accounts. SCHED_E_SERVICE_NOT_LOCALSYSTEM
7001 The specified session name is invalid. ERROR_CTX_WINSTATION_NAME_INVALID
7002 The specified protocol driver is invalid. ERROR_CTX_INVALID_PD
7003 The specified protocol driver was not found in the system path. ERROR_CTX_PD_NOT_FOUND
7004 The specified terminal connection driver was not found in the system path. ERROR_CTX_WD_NOT_FOUND
7005 A registry key for event logging could not be created for this session. ERROR_CTX_CANNOT_MAKE_EVENTLOG_ENTRY
7006 A service with the same name already exists on the system. ERROR_CTX_SERVICE_NAME_COLLISION
7007 A close operation is pending on the session. ERROR_CTX_CLOSE_PENDING
7008 There are no free output buffers available. ERROR_CTX_NO_OUTBUF
7009 The MODEM.INF file was not found. ERROR_CTX_MODEM_INF_NOT_FOUND
7010 The modem name was not found in MODEM.INF. ERROR_CTX_INVALID_MODEMNAME
7011 The modem did not accept the command sent to it. Verify that the configured modem name matches the attached modem. ERROR_CTX_MODEM_RESPONSE_ERROR
7012 The modem did not respond to the command sent to it. Verify that the modem is properly cabled and powered on. ERROR_CTX_MODEM_RESPONSE_TIMEOUT
7013 Carrier detect has failed or carrier has been dropped due to disconnect. ERROR_CTX_MODEM_RESPONSE_NO_CARRIER
7014 Dial tone not detected within the required time. Verify that the phone cable is properly attached and functional. ERROR_CTX_MODEM_RESPONSE_NO_DIALTONE
7015 Busy signal detected at remote site on callback. ERROR_CTX_MODEM_RESPONSE_BUSY
7016 Voice detected at remote site on callback. ERROR_CTX_MODEM_RESPONSE_VOICE
7017 Transport driver error ERROR_CTX_TD_ERROR
7022 The specified session cannot be found. ERROR_CTX_WINSTATION_NOT_FOUND
7023 The specified session name is already in use. ERROR_CTX_WINSTATION_ALREADY_EXISTS
7024 The requested operation cannot be completed because the terminal connection is currently busy processing a connect, disconnect, reset, or delete operation. ERROR_CTX_WINSTATION_BUSY
7025 An attempt has been made to connect to a session whose video mode is not supported by the current client. ERROR_CTX_BAD_VIDEO_MODE
7035 The application attempted to enable DOS graphics mode. DOS graphics mode is not supported. ERROR_CTX_GRAPHICS_INVALID
7037 Your interactive logon privilege has been disabled. Please contact your administrator. ERROR_CTX_LOGON_DISABLED
7038 The requested operation can be performed only on the system console. This is most often the result of a driver or system DLL requiring direct console access. ERROR_CTX_NOT_CONSOLE
7040 The client failed to respond to the server connect message. ERROR_CTX_CLIENT_QUERY_TIMEOUT
7041 Disconnecting the console session is not supported. ERROR_CTX_CONSOLE_DISCONNECT
7042 Reconnecting a disconnected session to the console is not supported. ERROR_CTX_CONSOLE_CONNECT
7044 The request to control another session remotely was denied. ERROR_CTX_SHADOW_DENIED
7045 The requested session access is denied. ERROR_CTX_WINSTATION_ACCESS_DENIED
7049 The specified terminal connection driver is invalid. ERROR_CTX_INVALID_WD
7050 The requested session cannot be controlled remotely. This may be because the session is disconnected or does not currently have a user logged on. ERROR_CTX_SHADOW_INVALID
7051 The requested session is not configured to allow remote control. ERROR_CTX_SHADOW_DISABLED
7052 Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number is currently being used by another user. Please call your system administrator to obtain a unique license number. ERROR_CTX_CLIENT_LICENSE_IN_USE
7053 Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number has not been entered for this copy of the Terminal Server client. Please contact your system administrator. ERROR_CTX_CLIENT_LICENSE_NOT_SET
7054 The system has reached its licensed logon limit. Please try again later. ERROR_CTX_LICENSE_NOT_AVAILABLE
7055 The client you are using is not licensed to use this system. Your logon request is denied. ERROR_CTX_LICENSE_CLIENT_INVALID
7056 The system license has expired. Your logon request is denied. ERROR_CTX_LICENSE_EXPIRED
7057 Remote control could not be terminated because the specified session is not currently being remotely controlled. ERROR_CTX_SHADOW_NOT_RUNNING
7058 The remote control of the console was terminated because the display mode was changed. Changing the display mode in a remote control session is not supported. ERROR_CTX_SHADOW_ENDED_BY_MODE_CHANGE
7059 Activation has already been reset the maximum number of times for this installation. Your activation timer will not be cleared. ERROR_ACTIVATION_COUNT_EXCEEDED
8001 The file replication service API was called incorrectly. FRS_ERR_INVALID_API_SEQUENCE
8002 The file replication service cannot be started. FRS_ERR_STARTING_SERVICE
8003 The file replication service cannot be stopped. FRS_ERR_STOPPING_SERVICE
8004 The file replication service API terminated the request. The event log may have more information. FRS_ERR_INTERNAL_API
8005 The file replication service terminated the request. The event log may have more information. FRS_ERR_INTERNAL
8006 The file replication service cannot be contacted. The event log may have more information. FRS_ERR_SERVICE_COMM
8007 The file replication service cannot satisfy the request because the user has insufficient privileges. The event log may have more information. FRS_ERR_INSUFFICIENT_PRIV
8008 The file replication service cannot satisfy the request because authenticated RPC is not available. The event log may have more information. FRS_ERR_AUTHENTICATION
8009 The file replication service cannot satisfy the request because the user has insufficient privileges on the domain controller. The event log may have more information. FRS_ERR_PARENT_INSUFFICIENT_PRIV
8010 The file replication service cannot satisfy the request because authenticated RPC is not available on the domain controller. The event log may have more information. FRS_ERR_PARENT_AUTHENTICATION
8011 The file replication service cannot communicate with the file replication service on the domain controller. The event log may have more information. FRS_ERR_CHILD_TO_PARENT_COMM
8012 The file replication service on the domain controller cannot communicate with the file replication service on this computer. The event log may have more information. FRS_ERR_PARENT_TO_CHILD_COMM
8013 The file replication service cannot populate the system volume because of an internal error. The event log may have more information. FRS_ERR_SYSVOL_POPULATE
8014 The file replication service cannot populate the system volume because of an internal timeout. The event log may have more information. FRS_ERR_SYSVOL_POPULATE_TIMEOUT
8015 The file replication service cannot process the request. The system volume is busy with a previous request. FRS_ERR_SYSVOL_IS_BUSY
8016 The file replication service cannot stop replicating the system volume because of an internal error. The event log may have more information. FRS_ERR_SYSVOL_DEMOTE
8017 The file replication service detected an invalid parameter. FRS_ERR_INVALID_SERVICE_PARAMETER
8200 An error occurred while installing the directory service. For more information, see the event log. ERROR_DS_NOT_INSTALLED
8201 The directory service evaluated group memberships locally. ERROR_DS_MEMBERSHIP_EVALUATED_LOCALLY
8202 The specified directory service attribute or value does not exist. ERROR_DS_NO_ATTRIBUTE_OR_VALUE
8203 The attribute syntax specified to the directory service is invalid. ERROR_DS_INVALID_ATTRIBUTE_SYNTAX
8204 The attribute type specified to the directory service is not defined. ERROR_DS_ATTRIBUTE_TYPE_UNDEFINED
8205 The specified directory service attribute or value already exists. ERROR_DS_ATTRIBUTE_OR_VALUE_EXISTS
8206 The directory service is busy. ERROR_DS_BUSY
8207 The directory service is unavailable. ERROR_DS_UNAVAILABLE
8208 The directory service was unable to allocate a relative identifier. ERROR_DS_NO_RIDS_ALLOCATED
8209 The directory service has exhausted the pool of relative identifiers. ERROR_DS_NO_MORE_RIDS
8210 The requested operation could not be performed because the directory service is not the master for that type of operation. ERROR_DS_INCORRECT_ROLE_OWNER
8211 The directory service was unable to initialize the subsystem that allocates relative identifiers. ERROR_DS_RIDMGR_INIT_ERROR
8212 The requested operation did not satisfy one or more constraints associated with the class of the object. ERROR_DS_OBJ_CLASS_VIOLATION
8213 The directory service can perform the requested operation only on a leaf object. ERROR_DS_CANT_ON_NON_LEAF
8214 The directory service cannot perform the requested operation on the RDN attribute of an object. ERROR_DS_CANT_ON_RDN
8215 The directory service detected an attempt to modify the object class of an object. ERROR_DS_CANT_MOD_OBJ_CLASS
8216 The requested cross-domain move operation could not be performed. ERROR_DS_CROSS_DOM_MOVE_ERROR
8217 Unable to contact the global catalog server. ERROR_DS_GC_NOT_AVAILABLE
8218 The policy object is shared and can only be modified at the root. ERROR_SHARED_POLICY
8219 The policy object does not exist. ERROR_POLICY_OBJECT_NOT_FOUND
8220 The requested policy information is only in the directory service. ERROR_POLICY_ONLY_IN_DS
8221 A domain controller promotion is currently active. ERROR_PROMOTION_ACTIVE
8222 A domain controller promotion is not currently active ERROR_NO_PROMOTION_ACTIVE
8224 An operations error occurred. ERROR_DS_OPERATIONS_ERROR
8225 A protocol error occurred. ERROR_DS_PROTOCOL_ERROR
8226 The time limit for this request was exceeded. ERROR_DS_TIMELIMIT_EXCEEDED
8227 The size limit for this request was exceeded. ERROR_DS_SIZELIMIT_EXCEEDED
8228 The administrative limit for this request was exceeded. ERROR_DS_ADMIN_LIMIT_EXCEEDED
8229 The compare response was false. ERROR_DS_COMPARE_FALSE
8230 The compare response was true. ERROR_DS_COMPARE_TRUE
8231 The requested authentication method is not supported by the server. ERROR_DS_AUTH_METHOD_NOT_SUPPORTED
8232 A more secure authentication method is required for this server. ERROR_DS_STRONG_AUTH_REQUIRED
8233 Inappropriate authentication. ERROR_DS_INAPPROPRIATE_AUTH
8234 The authentication mechanism is unknown. ERROR_DS_AUTH_UNKNOWN
8235 A referral was returned from the server. ERROR_DS_REFERRAL
8236 The server does not support the requested critical extension. ERROR_DS_UNAVAILABLE_CRIT_EXTENSION
8237 This request requires a secure connection. ERROR_DS_CONFIDENTIALITY_REQUIRED
8238 Inappropriate matching. ERROR_DS_INAPPROPRIATE_MATCHING
8239 A constraint violation occurred. ERROR_DS_CONSTRAINT_VIOLATION
8240 There is no such object on the server. ERROR_DS_NO_SUCH_OBJECT
8241 There is an alias problem. ERROR_DS_ALIAS_PROBLEM
8242 An invalid dn syntax has been specified. ERROR_DS_INVALID_DN_SYNTAX
8243 The object is a leaf object. ERROR_DS_IS_LEAF
8244 There is an alias dereferencing problem. ERROR_DS_ALIAS_DEREF_PROBLEM
8245 The server is unwilling to process the request. ERROR_DS_UNWILLING_TO_PERFORM
8246 A loop has been detected. ERROR_DS_LOOP_DETECT
8247 There is a naming violation. ERROR_DS_NAMING_VIOLATION
8248 The result set is too large. ERROR_DS_OBJECT_RESULTS_TOO_LARGE
8249 The operation affects multiple DSAs ERROR_DS_AFFECTS_MULTIPLE_DSAS
8250 The server is not operational. ERROR_DS_SERVER_DOWN
8251 A local error has occurred. ERROR_DS_LOCAL_ERROR
8252 An encoding error has occurred. ERROR_DS_ENCODING_ERROR
8253 A decoding error has occurred. ERROR_DS_DECODING_ERROR
8254 The search filter cannot be recognized. ERROR_DS_FILTER_UNKNOWN
8255 One or more parameters are illegal. ERROR_DS_PARAM_ERROR
8256 The specified method is not supported. ERROR_DS_NOT_SUPPORTED
8257 No results were returned. ERROR_DS_NO_RESULTS_RETURNED
8258 The specified control is not supported by the server. ERROR_DS_CONTROL_NOT_FOUND
8259 A referral loop was detected by the client. ERROR_DS_CLIENT_LOOP
8260 The preset referral limit was exceeded. ERROR_DS_REFERRAL_LIMIT_EXCEEDED
8261 The search requires a SORT control. ERROR_DS_SORT_CONTROL_MISSING
8262 The search results exceed the offset range specified. ERROR_DS_OFFSET_RANGE_ERROR
8301 The root object must be the head of a naming context. The root object cannot have an instantiated parent. ERROR_DS_ROOT_MUST_BE_NC
8302 The add replica operation cannot be performed. The naming context must be writeable in order to create the replica. ERROR_DS_ADD_REPLICA_INHIBITED
8303 A reference to an attribute that is not defined in the schema occurred. ERROR_DS_ATT_NOT_DEF_IN_SCHEMA
8304 The maximum size of an object has been exceeded. ERROR_DS_MAX_OBJ_SIZE_EXCEEDED
8305 An attempt was made to add an object to the directory with a name that is already in use. ERROR_DS_OBJ_STRING_NAME_EXISTS
8306 An attempt was made to add an object of a class that does not have an RDN defined in the schema. ERROR_DS_NO_RDN_DEFINED_IN_SCHEMA
8307 An attempt was made to add an object using an RDN that is not the RDN defined in the schema. ERROR_DS_RDN_DOESNT_MATCH_SCHEMA
8308 None of the requested attributes were found on the objects. ERROR_DS_NO_REQUESTED_ATTS_FOUND
8309 The user buffer is too small. ERROR_DS_USER_BUFFER_TO_SMALL
8310 The attribute specified in the operation is not present on the object. ERROR_DS_ATT_IS_NOT_ON_OBJ
8311 Illegal modify operation. Some aspect of the modification is not permitted. ERROR_DS_ILLEGAL_MOD_OPERATION
8312 The specified object is too large. ERROR_DS_OBJ_TOO_LARGE
8313 The specified instance type is not valid. ERROR_DS_BAD_INSTANCE_TYPE
8314 The operation must be performed at a master DSA. ERROR_DS_MASTERDSA_REQUIRED
8315 The object class attribute must be specified. ERROR_DS_OBJECT_CLASS_REQUIRED
8316 A required attribute is missing. ERROR_DS_MISSING_REQUIRED_ATT
8317 An attempt was made to modify an object to include an attribute that is not legal for its class ERROR_DS_ATT_NOT_DEF_FOR_CLASS
8318 The specified attribute is already present on the object. ERROR_DS_ATT_ALREADY_EXISTS
8320 The specified attribute is not present, or has no values. ERROR_DS_CANT_ADD_ATT_VALUES
8321 Multiple values were specified for an attribute that can have only one value. ERROR_DS_SINGLE_VALUE_CONSTRAINT
8322 A value for the attribute was not in the acceptable range of values. ERROR_DS_RANGE_CONSTRAINT
8323 The specified value already exists. ERROR_DS_ATT_VAL_ALREADY_EXISTS
8324 The attribute cannot be removed because it is not present on the object. ERROR_DS_CANT_REM_MISSING_ATT
8325 The attribute value cannot be removed because it is not present on the object. ERROR_DS_CANT_REM_MISSING_ATT_VAL
8326 The specified root object cannot be a subref. ERROR_DS_ROOT_CANT_BE_SUBREF
8327 Chaining is not permitted. ERROR_DS_NO_CHAINING
8328 Chained evaluation is not permitted. ERROR_DS_NO_CHAINED_EVAL
8329 The operation could not be performed because the object's parent is either uninstantiated or deleted. ERROR_DS_NO_PARENT_OBJECT
8330 Having a parent that is an alias is not permitted. Aliases are leaf objects. ERROR_DS_PARENT_IS_AN_ALIAS
8331 The object and parent must be of the same type, either both masters or both replicas. ERROR_DS_CANT_MIX_MASTER_AND_REPS
8332 The operation cannot be performed because child objects exist. This operation can only be performed on a leaf object. ERROR_DS_CHILDREN_EXIST
8333 Directory object not found. ERROR_DS_OBJ_NOT_FOUND
8334 The aliased object is missing. ERROR_DS_ALIASED_OBJ_MISSING
8335 The object name has bad syntax. ERROR_DS_BAD_NAME_SYNTAX
8336 It is not permitted for an alias to refer to another alias. ERROR_DS_ALIAS_POINTS_TO_ALIAS
8337 The alias cannot be dereferenced. ERROR_DS_CANT_DEREF_ALIAS
8338 The operation is out of scope. ERROR_DS_OUT_OF_SCOPE
8339 The operation cannot continue because the object is in the process of being removed. ERROR_DS_OBJECT_BEING_REMOVED
8340 The DSA object cannot be deleted. ERROR_DS_CANT_DELETE_DSA_OBJ
8341 A directory service error has occurred. ERROR_DS_GENERIC_ERROR
8342 The operation can only be performed on an internal master DSA object. ERROR_DS_DSA_MUST_BE_INT_MASTER
8343 The object must be of class DSA. ERROR_DS_CLASS_NOT_DSA
8344 Insufficient access rights to perform the operation. ERROR_DS_INSUFF_ACCESS_RIGHTS
8345 The object cannot be added because the parent is not on the list of possible superiors. ERROR_DS_ILLEGAL_SUPERIOR
8346 Access to the attribute is not permitted because the attribute is owned by the Security Accounts Manager (SAM). ERROR_DS_ATTRIBUTE_OWNED_BY_SAM
8347 The name has too many parts. ERROR_DS_NAME_TOO_MANY_PARTS
8348 The name is too long. ERROR_DS_NAME_TOO_LONG
8349 The name value is too long. ERROR_DS_NAME_VALUE_TOO_LONG
8350 The directory service encountered an error parsing a name. ERROR_DS_NAME_UNPARSEABLE
8351 The directory service cannot get the attribute type for a name. ERROR_DS_NAME_TYPE_UNKNOWN
8352 The name does not identify an object; the name identifies a phantom. ERROR_DS_NOT_AN_OBJECT
8353 The security descriptor is too short. ERROR_DS_SEC_DESC_TOO_SHORT
8354 The security descriptor is invalid. ERROR_DS_SEC_DESC_INVALID
8355 Failed to create name for deleted object. ERROR_DS_NO_DELETED_NAME
8356 The parent of a new subref must exist. ERROR_DS_SUBREF_MUST_HAVE_PARENT
8357 The object must be a naming context. ERROR_DS_NCNAME_MUST_BE_NC
8358 It is not permitted to add an attribute which is owned by the system. ERROR_DS_CANT_ADD_SYSTEM_ONLY
8359 The class of the object must be structural; you cannot instantiate an abstract class. ERROR_DS_CLASS_MUST_BE_CONCRETE
8360 The schema object could not be found. ERROR_DS_INVALID_DMD
8361 A local object with this GUID (dead or alive) already exists. ERROR_DS_OBJ_GUID_EXISTS
8362 The operation cannot be performed on a back link. ERROR_DS_NOT_ON_BACKLINK
8363 The cross reference for the specified naming context could not be found. ERROR_DS_NO_CROSSREF_FOR_NC
8364 The operation could not be performed because the directory service is shutting down. ERROR_DS_SHUTTING_DOWN
8365 The directory service request is invalid. ERROR_DS_UNKNOWN_OPERATION
8366 The role owner attribute could not be read. ERROR_DS_INVALID_ROLE_OWNER
8367 The requested FSMO operation failed. The current FSMO holder could not be reached. ERROR_DS_COULDNT_CONTACT_FSMO
8368 Modification of a DN across a naming context is not permitted. ERROR_DS_CROSS_NC_DN_RENAME
8369 The attribute cannot be modified because it is owned by the system. ERROR_DS_CANT_MOD_SYSTEM_ONLY
8370 Only the replicator can perform this function. ERROR_DS_REPLICATOR_ONLY
8371 The specified class is not defined. ERROR_DS_OBJ_CLASS_NOT_DEFINED
8372 The specified class is not a subclass. ERROR_DS_OBJ_CLASS_NOT_SUBCLASS
8373 The name reference is invalid. ERROR_DS_NAME_REFERENCE_INVALID
8374 A cross reference already exists. ERROR_DS_CROSS_REF_EXISTS
8375 It is not permitted to delete a master cross reference. ERROR_DS_CANT_DEL_MASTER_CROSSREF
8376 Subtree notifications are only supported on NC heads. ERROR_DS_SUBTREE_NOTIFY_NOT_NC_HEAD
8377 Notification filter is too complex. ERROR_DS_NOTIFY_FILTER_TOO_COMPLEX
8378 Schema update failed: duplicate RDN. ERROR_DS_DUP_RDN
8379 Schema update failed: duplicate OID ERROR_DS_DUP_OID
8380 Schema update failed: duplicate MAPI identifier. ERROR_DS_DUP_MAPI_ID
8381 Schema update failed: duplicate schema-id GUID. ERROR_DS_DUP_SCHEMA_ID_GUID
8382 Schema update failed: duplicate LDAP display name. ERROR_DS_DUP_LDAP_DISPLAY_NAME
8383 Schema update failed: range-lower less than range upper ERROR_DS_SEMANTIC_ATT_TEST
8384 Schema update failed: syntax mismatch ERROR_DS_SYNTAX_MISMATCH
8385 Schema deletion failed: attribute is used in must-contain ERROR_DS_EXISTS_IN_MUST_HAVE
8386 Schema deletion failed: attribute is used in may-contain ERROR_DS_EXISTS_IN_MAY_HAVE
8387 Schema update failed: attribute in may-contain does not exist ERROR_DS_NONEXISTENT_MAY_HAVE
8388 Schema update failed: attribute in must-contain does not exist ERROR_DS_NONEXISTENT_MUST_HAVE
8389 Schema update failed: class in aux-class list does not exist or is not an auxiliary class ERROR_DS_AUX_CLS_TEST_FAIL
8390 Schema update failed: class in poss-superiors does not exist ERROR_DS_NONEXISTENT_POSS_SUP
8391 Schema update failed: class in subclassof list does not exist or does not satisfy hierarchy rules ERROR_DS_SUB_CLS_TEST_FAIL
8392 Schema update failed: Rdn-Att-Id has wrong syntax ERROR_DS_BAD_RDN_ATT_ID_SYNTAX
8393 Schema deletion failed: class is used as auxiliary class ERROR_DS_EXISTS_IN_AUX_CLS
8394 Schema deletion failed: class is used as sub class ERROR_DS_EXISTS_IN_SUB_CLS
8395 Schema deletion failed: class is used as poss superior ERROR_DS_EXISTS_IN_POSS_SUP
8396 Schema update failed in recalculating validation cache. ERROR_DS_RECALCSCHEMA_FAILED
8397 The tree deletion is not finished. ERROR_DS_TREE_DELETE_NOT_FINISHED
8398 The requested delete operation could not be performed. ERROR_DS_CANT_DELETE
8399 Cannot read the governs class identifier for the schema record. ERROR_DS_ATT_SCHEMA_REQ_ID
8400 The attribute schema has bad syntax. ERROR_DS_BAD_ATT_SCHEMA_SYNTAX
8401 The attribute could not be cached. ERROR_DS_CANT_CACHE_ATT
8402 The class could not be cached. ERROR_DS_CANT_CACHE_CLASS
8403 The attribute could not be removed from the cache. ERROR_DS_CANT_REMOVE_ATT_CACHE
8404 The class could not be removed from the cache. ERROR_DS_CANT_REMOVE_CLASS_CACHE
8405 The distinguished name attribute could not be read. ERROR_DS_CANT_RETRIEVE_DN
8406 No superior reference has been configured for the directory service. The directory service is therefore unable to issue referrals to objects outside this forest. ERROR_DS_MISSING_SUPREF
8407 The instance type attribute could not be retrieved. ERROR_DS_CANT_RETRIEVE_INSTANCE
8408 An internal error has occurred. ERROR_DS_CODE_INCONSISTENCY
8409 A database error has occurred. ERROR_DS_DATABASE_ERROR
8410 The attribute GOVERNSID is missing. ERROR_DS_GOVERNSID_MISSING
8411 An expected attribute is missing. ERROR_DS_MISSING_EXPECTED_ATT
8412 The specified naming context is missing a cross reference. ERROR_DS_NCNAME_MISSING_CR_REF
8413 A security checking error has occurred. ERROR_DS_SECURITY_CHECKING_ERROR
8414 The schema is not loaded. ERROR_DS_SCHEMA_NOT_LOADED
8415 Schema allocation failed. Please check if the machine is running low on memory. ERROR_DS_SCHEMA_ALLOC_FAILED
8416 Failed to obtain the required syntax for the attribute schema. ERROR_DS_ATT_SCHEMA_REQ_SYNTAX
8417 The global catalog verification failed. The global catalog is not available or does not support the operation. Some part of the directory is currently not available. ERROR_DS_GCVERIFY_ERROR
8418 The replication operation failed because of a schema mismatch between the servers involved. ERROR_DS_DRA_SCHEMA_MISMATCH
8419 The DSA object could not be found. ERROR_DS_CANT_FIND_DSA_OBJ
8420 The naming context could not be found. ERROR_DS_CANT_FIND_EXPECTED_NC
8421 The naming context could not be found in the cache. ERROR_DS_CANT_FIND_NC_IN_CACHE
8422 The child object could not be retrieved. ERROR_DS_CANT_RETRIEVE_CHILD
8423 The modification was not permitted for security reasons. ERROR_DS_SECURITY_ILLEGAL_MODIFY
8424 The operation cannot replace the hidden record. ERROR_DS_CANT_REPLACE_HIDDEN_REC
8425 The hierarchy file is invalid. ERROR_DS_BAD_HIERARCHY_FILE
8426 The attempt to build the hierarchy table failed. ERROR_DS_BUILD_HIERARCHY_TABLE_FAILED
8427 The directory configuration parameter is missing from the registry. ERROR_DS_CONFIG_PARAM_MISSING
8428 The attempt to count the address book indices failed. ERROR_DS_COUNTING_AB_INDICES_FAILED
8429 The allocation of the hierarchy table failed. ERROR_DS_HIERARCHY_TABLE_MALLOC_FAILED
8430 The directory service encountered an internal failure. ERROR_DS_INTERNAL_FAILURE
8431 The directory service encountered an unknown failure. ERROR_DS_UNKNOWN_ERROR
8432 A root object requires a class of 'top'. ERROR_DS_ROOT_REQUIRES_CLASS_TOP
8433 This directory server is shutting down, and cannot take ownership of new floating single-master operation roles. ERROR_DS_REFUSING_FSMO_ROLES
8434 The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles. ERROR_DS_MISSING_FSMO_SETTINGS
8435 The directory service was unable to transfer ownership of one or more floating single-master operation roles to other servers. ERROR_DS_UNABLE_TO_SURRENDER_ROLES
8436 The replication operation failed. ERROR_DS_DRA_GENERIC
8437 An invalid parameter was specified for this replication operation. ERROR_DS_DRA_INVALID_PARAMETER
8438 The directory service is too busy to complete the replication operation at this time. ERROR_DS_DRA_BUSY
8439 The distinguished name specified for this replication operation is invalid. ERROR_DS_DRA_BAD_DN
8440 The naming context specified for this replication operation is invalid. ERROR_DS_DRA_BAD_NC
8441 The distinguished name specified for this replication operation already exists. ERROR_DS_DRA_DN_EXISTS
8442 The replication system encountered an internal error. ERROR_DS_DRA_INTERNAL_ERROR
8443 The replication operation encountered a database inconsistency. ERROR_DS_DRA_INCONSISTENT_DIT
8444 The server specified for this replication operation could not be contacted. ERROR_DS_DRA_CONNECTION_FAILED
8445 The replication operation encountered an object with an invalid instance type. ERROR_DS_DRA_BAD_INSTANCE_TYPE
8446 The replication operation failed to allocate memory. ERROR_DS_DRA_OUT_OF_MEM
8447 The replication operation encountered an error with the mail system. ERROR_DS_DRA_MAIL_PROBLEM
8448 The replication reference information for the target server already exists. ERROR_DS_DRA_REF_ALREADY_EXISTS
8449 The replication reference information for the target server does not exist. ERROR_DS_DRA_REF_NOT_FOUND
8450 The naming context cannot be removed because it is replicated to another server. ERROR_DS_DRA_OBJ_IS_REP_SOURCE
8451 The replication operation encountered a database error. ERROR_DS_DRA_DB_ERROR
8452 The naming context is in the process of being removed or is not replicated from the specified server. ERROR_DS_DRA_NO_REPLICA
8453 Replication access was denied. ERROR_DS_DRA_ACCESS_DENIED
8454 The requested operation is not supported by this version of the directory service. ERROR_DS_DRA_NOT_SUPPORTED
8455 The replication remote procedure call was cancelled. ERROR_DS_DRA_RPC_CANCELLED
8456 The source server is currently rejecting replication requests. ERROR_DS_DRA_SOURCE_DISABLED
8457 The destination server is currently rejecting replication requests. ERROR_DS_DRA_SINK_DISABLED
8458 The replication operation failed due to a collision of object names. ERROR_DS_DRA_NAME_COLLISION
8459 The replication source has been reinstalled. ERROR_DS_DRA_SOURCE_REINSTALLED
8460 The replication operation failed because a required parent object is missing. ERROR_DS_DRA_MISSING_PARENT
8461 The replication operation was preempted. ERROR_DS_DRA_PREEMPTED
8462 The replication synchronization attempt was abandoned because of a lack of updates. ERROR_DS_DRA_ABANDON_SYNC
8463 The replication operation was terminated because the system is shutting down. ERROR_DS_DRA_SHUTDOWN
8464 The replication synchronization attempt failed as the destination partial attribute set is not a subset of source partial attribute set. ERROR_DS_DRA_INCOMPATIBLE_PARTIAL_SET
8465 The replication synchronization attempt failed because a master replica attempted to sync from a partial replica. ERROR_DS_DRA_SOURCE_IS_PARTIAL_REPLICA
8466 The server specified for this replication operation was contacted, but that server was unable to contact an additional server needed to complete the operation. ERROR_DS_DRA_EXTN_CONNECTION_FAILED
8467 The version of the Active Directory schema of the source forest is not compatible with the version of Active Directory on this computer. ERROR_DS_INSTALL_SCHEMA_MISMATCH
8468 Schema update failed: An attribute with the same link identifier already exists. ERROR_DS_DUP_LINK_ID
8469 Name translation: Generic processing error. ERROR_DS_NAME_ERROR_RESOLVING
8470 Name translation: Could not find the name or insufficient right to see name. ERROR_DS_NAME_ERROR_NOT_FOUND
8471 Name translation: Input name mapped to more than one output name. ERROR_DS_NAME_ERROR_NOT_UNIQUE
8472 Name translation: Input name found, but not the associated output format. ERROR_DS_NAME_ERROR_NO_MAPPING
8473 Name translation: Unable to resolve completely, only the domain was found. ERROR_DS_NAME_ERROR_DOMAIN_ONLY
8474 Name translation: Unable to perform purely syntactical mapping at the client without going out to the wire. ERROR_DS_NAME_ERROR_NO_SYNTACTICAL_MAPPING
8475 Modification of a constructed attribute is not allowed. ERROR_DS_CONSTRUCTED_ATT_MOD
8476 The OM-Object-Class specified is incorrect for an attribute with the specified syntax. ERROR_DS_WRONG_OM_OBJ_CLASS
8477 The replication request has been posted; waiting for reply. ERROR_DS_DRA_REPL_PENDING
8478 The requested operation requires a directory service, and none was available. ERROR_DS_DS_REQUIRED
8479 The LDAP display name of the class or attribute contains non-ASCII characters. ERROR_DS_INVALID_LDAP_DISPLAY_NAME
8480 The requested search operation is only supported for base searches. ERROR_DS_NON_BASE_SEARCH
8481 The search failed to retrieve attributes from the database. ERROR_DS_CANT_RETRIEVE_ATTS
8482 The schema update operation tried to add a backward link attribute that has no corresponding forward link. ERROR_DS_BACKLINK_WITHOUT_LINK
8483 Source and destination of a cross domain move do not agree on the object's epoch number. Either source or destination does not have the latest version of the object. ERROR_DS_EPOCH_MISMATCH
8484 Source and destination of a cross domain move do not agree on the object's current name. Either source or destination does not have the latest version of the object. ERROR_DS_SRC_NAME_MISMATCH
8485 Source and destination of a cross domain move operation are identical. Caller should use local move operation instead of cross domain move operation. ERROR_DS_SRC_AND_DST_NC_IDENTICAL
8486 Source and destination for a cross domain move are not in agreement on the naming contexts in the forest. Either source or destination does not have the latest version of the Partitions container. ERROR_DS_DST_NC_MISMATCH
8487 Destination of a cross domain move is not authoritative for the destination naming context. ERROR_DS_NOT_AUTHORITIVE_FOR_DST_NC
8488 Source and destination of a cross domain move do not agree on the identity of the source object. Either source or destination does not have the latest version of the source object. ERROR_DS_SRC_GUID_MISMATCH
8489 Object being moved across domains is already known to be deleted by the destination server. The source server does not have the latest version of the source object. ERROR_DS_CANT_MOVE_DELETED_OBJECT
8490 Another operation which requires exclusive access to the PDC PSMO is already in progress. ERROR_DS_PDC_OPERATION_IN_PROGRESS
8491 A cross domain move operation failed such that the two versions of the moved object exist - one each in the source and destination domains. The destination object needs to be removed to restore the system to a consistent state. ERROR_DS_CROSS_DOMAIN_CLEANUP_REQD
8492 This object may not be moved across domain boundaries either because cross domain moves for this class are disallowed, or the object has some special characteristics, e.g.: trust account or restricted RID, which prevent its move. ERROR_DS_ILLEGAL_XDOM_MOVE_OPERATION
8493 Can't move objects with memberships across domain boundaries as once moved, this would violate the membership conditions of the account group. Remove the object from any account group memberships and retry. ERROR_DS_CANT_WITH_ACCT_GROUP_MEMBERSHPS
8494 A naming context head must be the immediate child of another naming context head, not of an interior node. ERROR_DS_NC_MUST_HAVE_NC_PARENT
8495 The directory cannot validate the proposed naming context name because it does not hold a replica of the naming context above the proposed naming context. Please ensure that the domain naming master role is held by a server that is configured as a global catalog server, and that the server is up to date with its replication partners. (Applies only to Windows 2000 Domain Naming masters) ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE
8496 Destination domain must be in native mode. ERROR_DS_DST_DOMAIN_NOT_NATIVE
8497 The operation cannot be performed because the server does not have an infrastructure container in the domain of interest. ERROR_DS_MISSING_INFRASTRUCTURE_CONTAINER
8498 Cross-domain move of non-empty account groups is not allowed. ERROR_DS_CANT_MOVE_ACCOUNT_GROUP
8499 Cross-domain move of non-empty resource groups is not allowed. ERROR_DS_CANT_MOVE_RESOURCE_GROUP
8500 The search flags for the attribute are invalid. The ANR bit is valid only on attributes of Unicode or Teletex strings. ERROR_DS_INVALID_SEARCH_FLAG
8501 Tree deletions starting at an object which has an NC head as a descendant are not allowed. ERROR_DS_NO_TREE_DELETE_ABOVE_NC
8502 The directory service failed to lock a tree in preparation for a tree deletion because the tree was in use. ERROR_DS_COULDNT_LOCK_TREE_FOR_DELETE
8503 The directory service failed to identify the list of objects to delete while attempting a tree deletion. ERROR_DS_COULDNT_IDENTIFY_OBJECTS_FOR_TREE_DELETE
8504 Security Accounts Manager initialization failed because of the following error: %1.
Error Status: 0x%2. Click OK to shut down the system and reboot into Directory Services Restore Mode. Check the event log for detailed information.
 ERROR_DS_SAM_INIT_FAILURE
8505 Only an administrator can modify the membership list of an administrative group. ERROR_DS_SENSITIVE_GROUP_VIOLATION
8506 Cannot change the primary group ID of a domain controller account. ERROR_DS_CANT_MOD_PRIMARYGROUPID
8507 An attempt is made to modify the base schema. ERROR_DS_ILLEGAL_BASE_SCHEMA_MOD
8508 Adding a new mandatory attribute to an existing class, deleting a mandatory attribute from an existing class, or adding an optional attribute to the special class Top that is not a backlink attribute (directly or through inheritance, for example, by adding or deleting an auxiliary class) is not allowed. ERROR_DS_NONSAFE_SCHEMA_CHANGE
8509 Schema update is not allowed on this DC because the DC is not the schema FSMO Role Owner. ERROR_DS_SCHEMA_UPDATE_DISALLOWED
8510 An object of this class cannot be created under the schema container. You can only create attribute-schema and class-schema objects under the schema container. ERROR_DS_CANT_CREATE_UNDER_SCHEMA
8511 The replica/child install failed to get the objectVersion attribute on the schema container on the source DC. Either the attribute is missing on the schema container or the credentials supplied do not have permission to read it. ERROR_DS_INSTALL_NO_SRC_SCH_VERSION
8512 The replica/child install failed to read the objectVersion attribute in the SCHEMA section of the file schema.ini in the system32 directory. ERROR_DS_INSTALL_NO_SCH_VERSION_IN_INIFILE
8513 The specified group type is invalid. ERROR_DS_INVALID_GROUP_TYPE
8514 Cannot nest global groups in a mixed domain if the group is security-enabled. ERROR_DS_NO_NEST_GLOBALGROUP_IN_MIXEDDOMAIN
8515 Cannot nest local groups in a mixed domain if the group is security-enabled. ERROR_DS_NO_NEST_LOCALGROUP_IN_MIXEDDOMAIN
8516 A global group cannot have a local group as a member. ERROR_DS_GLOBAL_CANT_HAVE_LOCAL_MEMBER
8517 A global group cannot have a universal group as a member. ERROR_DS_GLOBAL_CANT_HAVE_UNIVERSAL_MEMBER
8518 A universal group cannot have a local group as a member. ERROR_DS_UNIVERSAL_CANT_HAVE_LOCAL_MEMBER
8519 A global group cannot have a cross-domain member. ERROR_DS_GLOBAL_CANT_HAVE_CROSSDOMAIN_MEMBER
8520 A local group cannot have another cross-domain local group as a member. ERROR_DS_LOCAL_CANT_HAVE_CROSSDOMAIN_LOCAL_MEMBER
8521 A group with primary members cannot change to a security-disabled group. ERROR_DS_HAVE_PRIMARY_MEMBERS
8522 The schema cache load failed to convert the string default SD on a class-schema object. ERROR_DS_STRING_SD_CONVERSION_FAILED
8523 Only DSAs configured to be Global Catalog servers should be allowed to hold the Domain Naming Master FSMO role. (Applies only to Windows 2000 servers) ERROR_DS_NAMING_MASTER_GC
8524 The DSA operation is unable to proceed because of a DNS lookup failure. ERROR_DS_LOOKUP_FAILURE
8525 While processing a change to the DNS Host Name for an object, the Service Principal Name values could not be kept in sync. ERROR_DS_COULDNT_UPDATE_SPNS
8526 The Security Descriptor attribute could not be read. ERROR_DS_CANT_RETRIEVE_SD
8527 The object requested was not found, but an object with that key was found. ERROR_DS_KEY_NOT_UNIQUE.
8528 The syntax of the linked attributed being added is incorrect. Forward links can only have syntax 2.5.5.1, 2.5.5.7, and 2.5.5.14, and backlinks can only have syntax 2.5.5.1. ERROR_DS_WRONG_LINKED_ATT_SYNTAX
8529 Security Account Manager needs to get the boot password. ERROR_DS_SAM_NEED_BOOTKEY_PASSWORD
8530 Security Account Manager needs to get the boot key from floppy disk. ERROR_DS_SAM_NEED_BOOTKEY_FLOPPY
8531 Directory Service cannot start. ERROR_DS_CANT_START
8532 Directory Services could not start. ERROR_DS_INIT_FAILURE
8533 The connection between client and server requires packet privacy or better. ERROR_DS_NO_PKT_PRIVACY_ON_CONNECTION
8534 The source domain may not be in the same forest as destination. ERROR_DS_SOURCE_DOMAIN_IN_FOREST
8535 The destination domain must be in the forest. ERROR_DS_DESTINATION_DOMAIN_NOT_IN_FOREST
8536 The operation requires that destination domain auditing be enabled. ERROR_DS_DESTINATION_AUDITING_NOT_ENABLED
8537 The operation couldn't locate a DC for the source domain. ERROR_DS_CANT_FIND_DC_FOR_SRC_DOMAIN
8538 The source object must be a group or user. ERROR_DS_SRC_OBJ_NOT_GROUP_OR_USER
8539 The source object's SID already exists in destination forest. ERROR_DS_SRC_SID_EXISTS_IN_FOREST
8540 The source and destination object must be of the same type. ERROR_DS_SRC_AND_DST_OBJECT_CLASS_MISMATCH
8541 Security Accounts Manager initialization failed because of the following error: %1.
Error Status: 0x%2. Click OK to shut down the system and reboot into Safe Mode. Check the event log for detailed information.
 ERROR_SAM_INIT_FAILURE
8542 Schema information could not be included in the replication request. ERROR_DS_DRA_SCHEMA_INFO_SHIP
8543 The replication operation could not be completed due to a schema incompatibility. ERROR_DS_DRA_SCHEMA_CONFLICT
8544 The replication operation could not be completed due to a previous schema incompatibility. ERROR_DS_DRA_EARLIER_SCHEMA_CONLICT
8545 The replication update could not be applied because either the source or the destination has not yet received information regarding a recent cross-domain move operation. ERROR_DS_DRA_OBJ_NC_MISMATCH
8546 The requested domain could not be deleted because there exist domain controllers that still host this domain. ERROR_DS_NC_STILL_HAS_DSAS
8547 The requested operation can be performed only on a global catalog server. ERROR_DS_GC_REQUIRED
8548 A local group can only be a member of other local groups in the same domain. ERROR_DS_LOCAL_MEMBER_OF_LOCAL_ONLY
8549 Foreign security principals cannot be members of universal groups. ERROR_DS_NO_FPO_IN_UNIVERSAL_GROUPS
8550 The attribute is not allowed to be replicated to the GC because of security reasons. ERROR_DS_CANT_ADD_TO_GC
8551 The checkpoint with the PDC could not be taken because there are too many modifications being processed currently. ERROR_DS_NO_CHECKPOINT_WITH_PDC
8552 The operation requires that source domain auditing be enabled. ERROR_DS_SOURCE_AUDITING_NOT_ENABLED
8553 Security principal objects can only be created inside domain naming contexts. ERROR_DS_CANT_CREATE_IN_NONDOMAIN_NC
8554 A Service Principal Name (SPN) could not be constructed because the provided hostname is not in the necessary format. ERROR_DS_INVALID_NAME_FOR_SPN
8555 A Filter was passed that uses constructed attributes. ERROR_DS_FILTER_USES_CONTRUCTED_ATTRS
8556 The unicodePwd attribute value must be enclosed in double quotes. ERROR_DS_UNICODEPWD_NOT_IN_QUOTES
8557 Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased. ERROR_DS_MACHINE_ACCOUNT_QUOTA_EXCEEDED
8558 For security reasons, the operation must be run on the destination DC. ERROR_DS_MUST_BE_RUN_ON_DST_DC
8559 For security reasons, the source DC must be NT4SP4 or greater. ERROR_DS_SRC_DC_MUST_BE_SP4_OR_GREATER
8560 Critical Directory Service System objects cannot be deleted during tree delete operations. The tree delete may have been partially performed. ERROR_DS_CANT_TREE_DELETE_CRITICAL_OBJ
8561 Directory Services could not start because of the following error: %1.
Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the system further.
 ERROR_DS_INIT_FAILURE_CONSOLE
8562 Security Accounts Manager initialization failed because of the following error: %1.
Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the system further.
 ERROR_DS_SAM_INIT_FAILURE_CONSOLE
8563 The version of the operating system installed is incompatible with the current forest functional level. You must upgrade to a new version of the operating system before this server can become a domain controller in this forest. ERROR_DS_FOREST_VERSION_TOO_HIGH
8564 The version of the operating system installed is incompatible with the current domain functional level. You must upgrade to a new version of the operating system before this server can become a domain controller in this domain. ERROR_DS_DOMAIN_VERSION_TOO_HIGH
8565 This version of the operating system installed on this server no longer supports the current forest functional level. You must raise the forest functional level before this server can become a domain controller in this forest. ERROR_DS_FOREST_VERSION_TOO_LOW
8566 This version of the operating system installed on this server no longer supports the current domain functional level. You must raise the domain functional level before this server can become a domain controller in this domain. ERROR_DS_DOMAIN_VERSION_TOO_LOW
8567 The version of the operating system installed on this server is incompatible with the functional level of the domain or forest. ERROR_DS_INCOMPATIBLE_VERSION
8568 The functional level of the domain (or forest) cannot be raised to the requested value, because there exist one or more domain controllers in the domain (or forest) that are at a lower incompatible functional level. ERROR_DS_LOW_DSA_VERSION
8569 The forest functional level cannot be raised to the requested level since one or more domains are still in mixed domain mode. All domains in the forest must be in native mode before you can raise the forest functional level. ERROR_DS_NO_BEHAVIOR_VERSION_IN_MIXEDDOMAIN
8570 The sort order requested is not supported. ERROR_DS_NOT_SUPPORTED_SORT_ORDER
8571 The requested name already exists as a unique identifier. ERROR_DS_NAME_NOT_UNIQUE
8572 The machine account was created pre-NT4. The account needs to be recreated. ERROR_DS_MACHINE_ACCOUNT_CREATED_PRENT4
8573 The database is out of version store. ERROR_DS_OUT_OF_VERSION_STORE
8574 Unable to continue operation because multiple conflicting controls were used. ERROR_DS_INCOMPATIBLE_CONTROLS_USED
8575 Unable to find a valid security descriptor reference domain for this partition. ERROR_DS_NO_REF_DOMAIN
8576 Schema update failed: The link identifier is reserved. ERROR_DS_RESERVED_LINK_ID
8577 Schema update failed: There are no link identifiers available. ERROR_DS_LINK_ID_NOT_AVAILABLE
8578 An account group cannot have a universal group as a member. ERROR_DS_AG_CANT_HAVE_UNIVERSAL_MEMBER
8579 Rename or move operations on naming context heads or read-only objects are not allowed. ERROR_DS_MODIFYDN_DISALLOWED_BY_INSTANCE_TYPE
8580 Move operations on objects in the schema naming context are not allowed. ERROR_DS_NO_OBJECT_MOVE_IN_SCHEMA_NC
8581 A system flag has been set on the object and does not allow the object to be moved or renamed. ERROR_DS_MODIFYDN_DISALLOWED_BY_FLAG
8582 This object is not allowed to change its grandparent container. Moves are not forbidden on this object, but are restricted to sibling containers. ERROR_DS_MODIFYDN_WRONG_GRANDPARENT
8583 Unable to resolve completely, a referral to another forest is generated. ERROR_DS_NAME_ERROR_TRUST_REFERRAL
8584 The requested action is not supported on standard server. ERROR_NOT_SUPPORTED_ON_STANDARD_SERVER
8585 Could not access a partition of the Active Directory located on a remote server. Make sure at least one server is running for the partition in question. ERROR_DS_CANT_ACCESS_REMOTE_PART_OF_AD
8586 The directory cannot validate the proposed naming context (or partition) name because it does not hold a replica nor can it contact a replica of the naming context above the proposed naming context. Please ensure that the parent naming context is properly registered in DNS, and at least one replica of this naming context is reachable by the Domain Naming master. ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE_V2
8587 The thread limit for this request was exceeded. ERROR_DS_THREAD_LIMIT_EXCEEDED
8588 The Global catalog server is not in the closet site. ERROR_DS_NOT_CLOSEST
8589 The DS cannot derive a service principal name (SPN) with which to mutually authenticate the target server because the corresponding server object in the local DS database has no serverReference attribute. ERROR_DS_CANT_DERIVE_SPN_WITHOUT_SERVER_REF
8590 The Directory Service failed to enter single user mode. ERROR_DS_SINGLE_USER_MODE_FAILED
8591 The Directory Service cannot parse the script because of a syntax error. ERROR_DS_NTDSCRIPT_SYNTAX_ERROR
8592 The Directory Service cannot process the script because of an error. ERROR_DS_NTDSCRIPT_PROCESS_ERROR
8593 The directory service cannot perform the requested operation because the servers involved are of different replication epochs (which is usually related to a domain rename that is in progress). ERROR_DS_DIFFERENT_REPL_EPOCHS
8594 The directory service binding must be renegotiated due to a change in the server extensions information. ERROR_DS_DRS_EXTENSIONS_CHANGED
8595 Operation not allowed on a disabled cross ref. ERROR_DS_REPLICA_SET_CHANGE_NOT_ALLOWED_ON_DISABLED_CR
8596 Schema update failed: No values for msDS-IntId are available. ERROR_DS_NO_MSDS_INTID
8597 Schema update failed: Duplicate msDS-INtId. Retry the operation. ERROR_DS_DUP_MSDS_INTID
8598 Schema deletion failed: attribute is used in rDNAttID. ERROR_DS_EXISTS_IN_RDNATTID
8599 The directory service failed to authorize the request. ERROR_DS_AUTHORIZATION_FAILED
8600 The Directory Service cannot process the script because it is invalid. ERROR_DS_INVALID_SCRIPT
8601 The remote create cross reference operation failed on the Domain Naming Master FSMO. The operation's error is in the extended data. ERROR_DS_REMOTE_CROSSREF_OP_FAILED
8602 A cross reference is in use locally with the same name. ERROR_DS_CROSS_REF_BUSY
8603 The DS cannot derive a service principal name (SPN) with which to mutually authenticate the target server because the server's domain has been deleted from the forest. ERROR_DS_CANT_DERIVE_SPN_FOR_DELETED_DOMAIN
8604 Writeable NCs prevent this DC from demoting. ERROR_DS_CANT_DEMOTE_WITH_WRITEABLE_NC
8605 The requested object has a non-unique identifier and cannot be retrieved. ERROR_DS_DUPLICATE_ID_FOUND
8606 Insufficient attributes were given to create an object. This object may not exist because it may have been deleted and already garbage collected. ERROR_DS_INSUFFICIENT_ATTR_TO_CREATE_OBJECT
8607 The group cannot be converted due to attribute restrictions on the requested group type. ERROR_DS_GROUP_CONVERSION_ERROR
8608 Cross-domain move of non-empty basic application groups is not allowed. ERROR_DS_CANT_MOVE_APP_BASIC_GROUP
8609 Cross-domain move on non-empty query based application groups is not allowed. ERROR_DS_CANT_MOVE_APP_QUERY_GROUP
8610 The role owner could not be verified because replication of its partition has not occurred recently. ERROR_DS_ROLE_NOT_VERIFIED
8611 The target container for a redirection of a well-known object container cannot already be a special container. ERROR_DS_WKO_CONTAINER_CANNOT_BE_SPECIAL
8612 The Directory Service cannot perform the requested operation because a domain rename operation is in progress. ERROR_DS_DOMAIN_RENAME_IN_PROGRESS
8613 The Active Directory detected an Active Directory child partition below the requested new partition name. The Active Directory's partition hierarchy must be created in a top-down method. ERROR_DS_EXISTING_AD_CHILD_NC
9001 DNS server unable to interpret format. DNS_ERROR_RCODE_FORMAT_ERROR
9002 DNS server failure. DNS_ERROR_RCODE_SERVER_FAILURE
9003 DNS name does not exist. DNS_ERROR_RCODE_NAME_ERROR
9004 DNS request not supported by name server. DNS_ERROR_RCODE_NOT_IMPLEMENTED
9005 DNS operation refused. DNS_ERROR_RCODE_REFUSED
9006 DNS name that ought not exist, does exist. DNS_ERROR_RCODE_YXDOMAIN
9007 DNS RR set that ought not exist, does exist. DNS_ERROR_RCODE_YXRRSET
9008 DNS RR set that ought to exist, does not exist. DNS_ERROR_RCODE_NXRRSET
9009 DNS server not authoritative for zone. DNS_ERROR_RCODE_NOTAUTH
9010 DNS name in update or prereq is not in zone. DNS_ERROR_RCODE_NOTZONE
9016 DNS signature failed to verify. DNS_ERROR_RCODE_BADSIG
9017 DNS bad key. DNS_ERROR_RCODE_BADKEY
9018 DNS signature validity expired. DNS_ERROR_RCODE_BADTIME
9501 No records found for given DNS query. DNS_INFO_NO_RECORDS
9502 Bad DNS packet. DNS_ERROR_BAD_PACKET
9503 No DNS packet. DNS_ERROR_NO_PACKET
9504 DNS error, check rcode. DNS_ERROR_RCODE
9505 Unsecured DNS packet. DNS_ERROR_UNSECURE_PACKET
9551 Invalid DNS type. DNS_ERROR_INVALID_TYPE
9552 Invalid IP address. DNS_ERROR_INVALID_IP_ADDRESS
9553 Invalid property. DNS_ERROR_INVALID_PROPERTY
9554 Try DNS operation again later. DNS_ERROR_TRY_AGAIN_LATER
9555 Record for given name and type is not unique. DNS_ERROR_NOT_UNIQUE
9556 DNS name does not comply with RFC specifications. DNS_ERROR_NON_RFC_NAME
9557 DNS name is a fully-qualified DNS name. DNS_STATUS_FQDN
9558 DNS name is dotted (multi-label). DNS_STATUS_DOTTED_NAME
9559 DNS name is a single-part name. DNS_STATUS_SINGLE_PART_NAME
9560 DSN name contains an invalid character. DNS_ERROR_INVALID_NAME_CHAR
9561 DNS name is entirely numeric. DNS_ERROR_NUMERIC_NAME
9562 The operation requested is not permitted on a DNS root server. DNS_ERROR_NOT_ALLOWED_ON_ROOT_SERVER
9563 The record could not be created because this part of the DNS namespace has been delegated to another server. DNS_ERROR_NOT_ALLOWED_UNDER_DELEGATION
9564 The DNS server could not find a set of root hints. DNS_ERROR_CANNOT_FIND_ROOT_HINTS
9565 The DNS server found root hints but they were not consistent across all adapters. DNS_ERROR_INCONSISTENT_ROOT_HINTS
9601 DNS zone does not exist. DNS_ERROR_ZONE_DOES_NOT_EXIST
9602 DNS zone information not available. DNS_ERROR_NO_ZONE_INFO
9603 Invalid operation for DNS zone. DNS_ERROR_INVALID_ZONE_OPERATION
9604 Invalid DNS zone configuration. DNS_ERROR_ZONE_CONFIGURATION_ERROR
9605 DNS zone has no start of authority (SOA) record. DNS_ERROR_ZONE_HAS_NO_SOA_RECORD
9606 DNS zone has no name server (NS) record. DNS_ERROR_ZONE_HAS_NO_NS_RECORDS
9607 DNS zone is locked. DNS_ERROR_ZONE_LOCKED
9608 DNS zone creation failed. DNS_ERROR_ZONE_CREATION_FAILED
9609 DNS zone already exists. DNS_ERROR_ZONE_ALREADY_EXISTS
9610 DNS automatic zone already exists. DNS_ERROR_AUTOZONE_ALREADY_EXISTS
9611 Invalid DNS zone type. DNS_ERROR_INVALID_ZONE_TYPE
9612 Secondary DNS zone requires master IP address. DNS_ERROR_SECONDARY_REQUIRES_MASTER_IP
9613 DNS zone not secondary. DNS_ERROR_ZONE_NOT_SECONDARY
9614 Need secondary IP address. DNS_ERROR_NEED_SECONDARY_ADDRESSES
9615 WINS initialization failed. DNS_ERROR_WINS_INIT_FAILED
9616 Need WINS servers. DNS_ERROR_NEED_WINS_SERVERS
9617 NBTSTAT initialization call failed. DNS_ERROR_NBSTAT_INIT_FAILED
9618 Invalid delete of start of authority (SOA) DNS_ERROR_SOA_DELETE_INVALID
9619 A conditional forwarding zone already exists for that name. DNS_ERROR_FORWARDER_ALREADY_EXISTS
9620 This zone must be configured with one or more master DNS server IP addresses. DNS_ERROR_ZONE_REQUIRES_MASTER_IP
9621 The operation cannot be performed because this zone is shutdown. DNS_ERROR_ZONE_IS_SHUTDOWN
9651 Primary DNS zone requires datafile. DNS_ERROR_PRIMARY_REQUIRES_DATAFILE
9652 Invalid datafile name for DNS zone. DNS_ERROR_INVALID_DATAFILE_NAME
9653 Failed to open datafile for DNS zone. DNS_ERROR_DATAFILE_OPEN_FAILURE
9654 Failed to write datafile for DNS zone. DNS_ERROR_FILE_WRITEBACK_FAILED
9655 Failure while reading datafile for DNS zone. DNS_ERROR_DATAFILE_PARSING
9701 DNS record does not exist. DNS_ERROR_RECORD_DOES_NOT_EXIST
9702 DNS record format error. DNS_ERROR_RECORD_FORMAT
9703 Node creation failure in DNS. DNS_ERROR_NODE_CREATION_FAILED
9704 Unknown DNS record type. DNS_ERROR_UNKNOWN_RECORD_TYPE
9705 DNS record timed out. DNS_ERROR_RECORD_TIMED_OUT
9706 Name not in DNS zone. DNS_ERROR_NAME_NOT_IN_ZONE
9707 CNAME loop detected. DNS_ERROR_CNAME_LOOP
9708 Node is a CNAME DNS record. DNS_ERROR_NODE_IS_CNAME
9709 A CNAME record already exists for given name. DNS_ERROR_CNAME_COLLISION
9710 Record only at DNS zone root. DNS_ERROR_RECORD_ONLY_AT_ZONE_ROOT
9711 DNS record already exists. DNS_ERROR_RECORD_ALREADY_EXISTS
9712 Secondary DNS zone data error. DNS_ERROR_SECONDARY_DATA
9713 Could not create DNS cache data. DNS_ERROR_NO_CREATE_CACHE_DATA
9714 DNS name does not exist. DNS_ERROR_NAME_DOES_NOT_EXIST
9715 Could not create pointer (PTR) record. DNS_WARNING_PTR_CREATE_FAILED
9716 DNS domain was undeleted. DNS_WARNING_DOMAIN_UNDELETED
9717 The directory service is unavailable. DNS_ERROR_DS_UNAVAILABLE
9718 DNS zone already exists in the directory service. DNS_ERROR_DS_ZONE_ALREADY_EXISTS
9719 DNS server not creating or reading the boot file for the directory service integrated DNS zone. DNS_ERROR_NO_BOOTFILE_IF_DS_ZONE
9751 DNS AXFR (zone transfer) complete. DNS_INFO_AXFR_COMPLETE
9752 DNS zone transfer failed. DNS_ERROR_AXFR
9753 Added local WINS server. DNS_INFO_ADDED_LOCAL_WINS
9801 Secure update call needs to continue update request. DNS_STATUS_CONTINUE_NEEDED
9851 TCP/IP network protocol not installed. DNS_ERROR_NO_TCPIP
9852 No DNS servers configured for local system. DNS_ERROR_NO_DNS_SERVERS
9901 The specified directory partition does not exist. DNS_ERROR_DP_DOES_NOT_EXIST
9902 The specified directory partition already exists. DNS_ERROR_DP_ALREADY_EXISTS
9903 The DNS server is not enlisted in the specified directory partition. DNS_ERROR_DP_NOT_ENLISTED
9904 The DNS server is already enlisted in the specified directory partition. DNS_ERROR_DP_ALREADY_ENLISTED
9905 The directory partition is not available at this time. Please wait a few minutes and try again. DNS_ERROR_DP_NOT_AVAILABLE.
10004 A blocking operation was interrupted by a call to WSACancelBlockingCall. WSAEINTR
10009 The file handle supplied is not valid. WSAEBADF
10013 An attempt was made to access a socket in a way forbidden by its access permissions. WSAEACCES
10014 The system detected an invalid pointer address in attempting to use a pointer argument in a call. WSAEFAULT
10022 An invalid argument was supplied. WSAEINVAL
10024 Too many open sockets. WSAEMFILE
10035 A non-blocking socket operation could not be completed immediately. WSAEWOULDBLOCK
10036 A blocking operation is currently executing. WSAEINPROGRESS
10037 An operation was attempted on a non-blocking socket that already had an operation in progress. WSAEALREADY
10038 An operation was attempted on something that is not a socket. WSAENOTSOCK
10039 A required address was omitted from an operation on a socket. WSAEDESTADDRREQ
10040 A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself. WSAEMSGSIZE
10041 A protocol was specified in the socket function call that does not support the semantics of the socket type requested. WSAEPROTOTYPE
10042 An unknown, invalid, or unsupported option or level was specified in a getsockopt or setsockopt call. WSAENOPROTOOPT
10043 The requested protocol has not been configured into the system, or no implementation for it exists. WSAEPROTONOSUPPORT
10044 The support for the specified socket type does not exist in this address family. WSAESOCKTNOSUPPORT
10045 The attempted operation is not supported for the type of object referenced. WSAEOPNOTSUPP
10046 The protocol family has not been configured into the system or no implementation for it exists. WSAEPFNOSUPPORT
10047 An address incompatible with the requested protocol was used. WSAEAFNOSUPPORT
10048 Only one usage of each socket address (protocol/network address/port) is normally permitted. WSAEADDRINUSE
10049 The requested address is not valid in its context. WSAEADDRNOTAVAIL
10050 A socket operation encountered a dead network. WSAENETDOWN
10051 A socket operation was attempted to an unreachable network. WSAENETUNREACH
10052 The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress. WSAENETRESET
10053 An established connection was aborted by the software in your host machine. WSAECONNABORTED
10054 An existing connection was forcibly closed by the remote host. WSAECONNRESET
10055 An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. WSAENOBUFS
10056 A connect request was made on an already connected socket. WSAEISCONN
10057 A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied. WSAENOTCONN
10058 A request to send or receive data was disallowed because the socket had already been shut down in that direction with a previous shutdown call. WSAESHUTDOWN
10059 Too many references to some kernel object. WSAETOOMANYREFS
10060 A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. WSAETIMEDOUT
10061 No connection could be made because the target machine actively refused it. WSAECONNREFUSED
10062 Cannot translate name. WSAELOOP
10063 Name component or name was too long. WSAENAMETOOLONG
10064 A socket operation failed because the destination host was down. WSAEHOSTDOWN
10065 A socket operation was attempted to an unreachable host. WSAEHOSTUNREACH
10066 Cannot remove a directory that is not empty. WSAENOTEMPTY
10067 A Windows Sockets implementation may have a limit on the number of applications that may use it simultaneously. WSAEPROCLIM
10068 Ran out of quota. WSAEUSERS
10069 Ran out of disk quota. WSAEDQUOT
10070 File handle reference is no longer available. WSAESTALE
10071 Item is not available locally. WSAEREMOTE
10091 WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable. WSASYSNOTREADY
10092 The Windows Sockets version requested is not supported. WSAVERNOTSUPPORTED
10093 Either the application has not called WSAStartup, or WSAStartup failed. WSANOTINITIALISED
10101 Returned by WSARecv or WSARecvFrom to indicate the remote party has initiated a graceful shutdown sequence. WSAEDISCON
10102 No more results can be returned by WSALookupServiceNext. WSAENOMORE
10103 A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled. WSAECANCELLED
10104 The procedure call table is invalid. WSAEINVALIDPROCTABLE
10105 The requested service provider is invalid. WSAEINVALIDPROVIDER
10106 The requested service provider could not be loaded or initialized. WSAEPROVIDERFAILEDINIT
10107 A system call that should never fail has failed. WSASYSCALLFAILURE
10108 No such service is known. The service cannot be found in the specified name space. WSASERVICE_NOT_FOUND
10109 The specified class was not found. WSATYPE_NOT_FOUND
10110 No more results can be returned by WSALookupServiceNext. WSA_E_NO_MORE
10111 A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled. WSA_E_CANCELLED
10112 A database query failed because it was actively refused. WSAEREFUSED
11001 No such host is known. WSAHOST_NOT_FOUND
11002 This is usually a temporary error during hostname resolution and means that the local server did not receive a response from an authoritative server. WSATRY_AGAIN
11003 A non-recoverable error occurred during a database lookup. WSANO_RECOVERY
11004 The requested name is valid, but no data of the requested type was found. WSANO_DATA
11005 At least one reserve has arrived. WSA_QOS_RECEIVERS
11006 At least one path has arrived. WSA_QOS_SENDERS
11007 There are no senders. WSA_QOS_NO_SENDERS
11008 There are no receivers. WSA_QOS_NO_RECEIVERS
11009 Reserve has been confirmed. WSA_QOS_REQUEST_CONFIRMED
11010 Error due to lack of resources. WSA_QOS_ADMISSION_FAILURE
11011 Rejected for administrative reasons - bad credentials. WSA_QOS_POLICY_FAILURE
11012 Unknown or conflicting style. WSA_QOS_BAD_STYLE
11013 Problem with some part of the filterspec or providerspecific buffer in general. WSA_QOS_BAD_OBJECT
11014 Problem with some part of the flowspec. WSA_QOS_TRAFFIC_CTRL_ERROR
11015 General QOS error. WSA_QOS_GENERIC_ERROR
11016 An invalid or unrecognized service type was found in the flowspec. WSA_QOS_ESERVICETYPE
11017 An invalid or inconsistent flowspec was found in the QOS structure. WSA_QOS_EFLOWSPEC
11018 Invalid QOS provider-specific buffer. WSA_QOS_EPROVSPECBUF
11019 An invalid QOS filter style was used. WSA_QOS_EFILTERSTYLE
11020 An invalid QOS filter type was used. WSA_QOS_EFILTERTYPE
11021 An incorrect number of QOS FILTERSPECs were specified in the FLOWDESCRIPTOR. WSA_QOS_EFILTERCOUNT
11022 An object with an invalid ObjectLength field was specified in the QOS provider-specific buffer. WSA_QOS_EOBJLENGTH
11023 An incorrect number of flow descriptors was specified in the QOS structure. WSA_QOS_EFLOWCOUNT
11024 An unrecognized object was found in the QOS provider-specific buffer. WSA_QOS_EUNKNOWNPSOBJ
11025 An invalid policy object was found in the QOS provider-specific buffer. WSA_QOS_EPOLICYOBJ
11026 An invalid QOS flow descriptor was found in the flow descriptor list. WSA_QOS_EFLOWDESC
11027 An invalid or inconsistent flowspec was found in the QOS provider-specific buffer. WSA_QOS_EPSFLOWSPEC
11028 An invalid FILTERSPEC was found in the QOS provider-specific buffer. WSA_QOS_EPSFILTERSPEC
11029 An invalid shape discard mode object was found in the QOS provider-specific buffer. WSA_QOS_ESDMODEOBJ
11030 An invalid shaping rate object was found in the QOS provider-specific buffer. WSA_QOS_ESHAPERATEOBJ
11031 A reserved policy element was found in the QOS provider-specific buffer. WSA_QOS_RESERVED_PETYPE
13000 The specified quick mode policy already exists. ERROR_IPSEC_QM_POLICY_EXISTS
13001 The specified quick mode policy was not found. ERROR_IPSEC_QM_POLICY_NOT_FOUND
13002 The specified quick mode policy is being used. ERROR_IPSEC_QM_POLICY_IN_USE
13003 The specified main mode policy already exists. ERROR_IPSEC_MM_POLICY_EXISTS
13004 The specified main mode policy was not found. ERROR_IPSEC_MM_POLICY_NOT_FOUND
13005 The specified main mode policy is being used. ERROR_IPSEC_MM_POLICY_IN_USE
13006 The specified main mode filter already exists. ERROR_IPSEC_MM_FILTER_EXISTS
13007 The specified main mode filter was not found. ERROR_IPSEC_MM_FILTER_NOT_FOUND
13008 The specified transport mode filter already exists. ERROR_IPSEC_TRANSPORT_FILTER_EXISTS
13009 The specified transport mode filter does not exist. ERROR_IPSEC_TRANSPORT_FILTER_NOT_FOUND
13010 The specified main mode authentication list exists. ERROR_IPSEC_MM_AUTH_EXISTS
13011 The specified main mode authentication list was not found. ERROR_IPSEC_MM_AUTH_NOT_FOUND
13012 The specified quick mode policy is being used. ERROR_IPSEC_MM_AUTH_IN_USE
13013 The specified main mode policy was not found. ERROR_IPSEC_DEFAULT_MM_POLICY_NOT_FOUND
13014 The specified quick mode policy was not found. ERROR_IPSEC_DEFAULT_MM_AUTH_NOT_FOUND
13015 The manifest file contains one or more syntax errors. ERROR_IPSEC_DEFAULT_QM_POLICY_NOT_FOUND
13016 The application attempted to activate a disabled activation context. ERROR_IPSEC_TUNNEL_FILTER_EXISTS
13017 The requested lookup key was not found in any active activation context. ERROR_IPSEC_TUNNEL_FILTER_NOT_FOUND
13018 The Main Mode filter is pending deletion. ERROR_IPSEC_MM_FILTER_PENDING_DELETION
13019 The transport filter is pending deletion. ERROR_IPSEC_TRANSPORT_FILTER_PENDING_DELETION
13020 The tunnel filter is pending deletion. ERROR_IPSEC_TUNNEL_FILTER_PENDING_DELETION
13021 The Main Mode policy is pending deletion. ERROR_IPSEC_MM_POLICY_PENDING_DELETION
13022 The Main Mode authentication bundle is pending deletion. ERROR_IPSEC_MM_AUTH_PENDING_DELETION
13023 The Quick Mode policy is pending deletion. ERROR_IPSEC_QM_POLICY_PENDING_DELETION
13024 The Main Mode policy was successfully added, but some of the requested offers are not supported. WARNING_IPSEC_MM_POLICY_PRUNED
13025 The Quick Mode policy was successfully added, but some of the requested offers are not supported. WARNING_IPSEC_QM_POLICY_PRUNED
13801 IKE authentication credentials are unacceptable. ERROR_IPSEC_IKE_AUTH_FAIL
13802 IKE security attributes are unacceptable. ERROR_IPSEC_IKE_ATTRIB_FAIL
13803 IKE Negotiation in progress. ERROR_IPSEC_IKE_NEGOTIATION_PENDING
13804 General processing error. ERROR_IPSEC_IKE_GENERAL_PROCESSING_ERROR
13805 Negotiation timed out. ERROR_IPSEC_IKE_TIMED_OUT
13806 IKE failed to find valid machine certificate. ERROR_IPSEC_IKE_NO_CERT
13807 IKE SA deleted by peer before establishment completed. ERROR_IPSEC_IKE_SA_DELETED
13808 IKE SA deleted before establishment completed. ERROR_IPSEC_IKE_SA_REAPED
13809 Negotiation request sat in Queue too long. ERROR_IPSEC_IKE_MM_ACQUIRE_DROP
13810 Negotiation request sat in Queue too long. ERROR_IPSEC_IKE_QM_ACQUIRE_DROP
13811 Negotiation request sat in Queue too long. ERROR_IPSEC_IKE_QUEUE_DROP_MM
13812 Negotiation request sat in Queue too long. ERROR_IPSEC_IKE_QUEUE_DROP_NO_MM
13813 No response from peer. ERROR_IPSEC_IKE_DROP_NO_RESPONSE
13814 Negotiation took too long. ERROR_IPSEC_IKE_MM_DELAY_DROP
13815 Negotiation took too long. ERROR_IPSEC_IKE_QM_DELAY_DROP
13816 Unknown error occurred. ERROR_IPSEC_IKE_ERROR
13817 Certificate Revocation Check failed. ERROR_IPSEC_IKE_CRL_FAILED
13818 Invalid certificate key usage. ERROR_IPSEC_IKE_INVALID_KEY_USAGE
13819 Invalid certificate type. ERROR_IPSEC_IKE_INVALID_CERT_TYPE
13820 No private key associated with machine certificate. ERROR_IPSEC_IKE_NO_PRIVATE_KEY
13822 Failure in Diffie-Helman computation. ERROR_IPSEC_IKE_DH_FAIL
13824 Invalid header. ERROR_IPSEC_IKE_INVALID_HEADER
13825 No policy configured. ERROR_IPSEC_IKE_NO_POLICY
13826 Failed to verify signature. ERROR_IPSEC_IKE_INVALID_SIGNATURE
13827 Failed to authenticate using Kerberos. ERROR_IPSEC_IKE_KERBEROS_ERROR
13828 Peer's certificate did not have a public key. ERROR_IPSEC_IKE_NO_PUBLIC_KEY
13829 Error processing error payload. ERROR_IPSEC_IKE_PROCESS_ERR
13830 Error processing SA payload. ERROR_IPSEC_IKE_PROCESS_ERR_SA
13831 Error processing Proposal payload. ERROR_IPSEC_IKE_PROCESS_ERR_PROP
13832 Error processing Transform payload. ERROR_IPSEC_IKE_PROCESS_ERR_TRANS
13833 Error processing KE payload. ERROR_IPSEC_IKE_PROCESS_ERR_KE
13834 Error processing ID payload. ERROR_IPSEC_IKE_PROCESS_ERR_ID
13835 Error processing Cert payload. ERROR_IPSEC_IKE_PROCESS_ERR_CERT
13836 Error processing Certificate Request payload. ERROR_IPSEC_IKE_PROCESS_ERR_CERT_REQ
13837 Error processing Hash payload. ERROR_IPSEC_IKE_PROCESS_ERR_HASH
13838 Error processing Signature payload. ERROR_IPSEC_IKE_PROCESS_ERR_SIG
13839 Error processing Nonce payload. ERROR_IPSEC_IKE_PROCESS_ERR_NONCE
13840 Error processing Notify payload. ERROR_IPSEC_IKE_PROCESS_ERR_NOTIFY
13841 Error processing Delete Payload. ERROR_IPSEC_IKE_PROCESS_ERR_DELETE
13842 Error processing VendorId payload. ERROR_IPSEC_IKE_PROCESS_ERR_VENDOR
13843 Invalid payload received. ERROR_IPSEC_IKE_INVALID_PAYLOAD
13844 Soft SA loaded. ERROR_IPSEC_IKE_LOAD_SOFT_SA
13845 Soft SA torn down. ERROR_IPSEC_IKE_SOFT_SA_TORN_DOWN
13846 Invalid cookie received.. ERROR_IPSEC_IKE_INVALID_COOKIE
13847 Peer failed to send valid machine certificate. ERROR_IPSEC_IKE_NO_PEER_CERT
13848 Certification Revocation check of peer's certificate failed. ERROR_IPSEC_IKE_PEER_CRL_FAILED
13849 New policy invalidated SAs formed with old policy. ERROR_IPSEC_IKE_POLICY_CHANGE
13850 There is no available Main Mode IKE policy. ERROR_IPSEC_IKE_NO_MM_POLICY
13851 Failed to enabled TCB privilege. ERROR_IPSEC_IKE_NOTCBPRIV
13852 Failed to load SECURITY.DLL. ERROR_IPSEC_IKE_SECLOADFAIL
13853 Failed to obtain security function table dispatch address from SSPI. ERROR_IPSEC_IKE_FAILSSPINIT
13854 Failed to query Kerberos package to obtain max token size. ERROR_IPSEC_IKE_FAILQUERYSSP
13855 Failed to obtain Kerberos server credentials for ISAKMP/ERROR_IPSEC_IKE service. Kerberos authentication will not function. The most likely reason for this is lack of domain membership. This is normal if your computer is a member of a workgroup. ERROR_IPSEC_IKE_SRVACQFAIL
13856 Failed to determine SSPI principal name for ISAKMP/ERROR_IPSEC_IKE service (QueryCredentialsAttributes). ERROR_IPSEC_IKE_SRVQUERYCRED
13857 Failed to obtain new SPI for the inbound SA from Ipsec driver. The most common cause for this is that the driver does not have the correct filter. Check your policy to verify the filters. ERROR_IPSEC_IKE_GETSPIFAIL
13858 Given filter is invalid. ERROR_IPSEC_IKE_INVALID_FILTER
13859 Memory allocation failed. ERROR_IPSEC_IKE_OUT_OF_MEMORY
13860 Failed to add Security Association to IPSec Driver. The most common cause for this is if the IKE negotiation took too long to complete. If the problem persists, reduce the load on the faulting machine. ERROR_IPSEC_IKE_ADD_UPDATE_KEY_FAILED
13861 Invalid policy. ERROR_IPSEC_IKE_INVALID_POLICY
13862 Invalid DOI. ERROR_IPSEC_IKE_UNKNOWN_DOI
13863 Invalid situation. ERROR_IPSEC_IKE_INVALID_SITUATION
13864 Diffie-Hellman failure. ERROR_IPSEC_IKE_DH_FAILURE
13865 Invalid Diffie-Hellman group. ERROR_IPSEC_IKE_INVALID_GROUP
13866 Error encrypting payload. ERROR_IPSEC_IKE_ENCRYPT
13867 Error decrypting payload. ERROR_IPSEC_IKE_DECRYPT
13868 Policy match error. ERROR_IPSEC_IKE_POLICY_MATCH
13869 Unsupported ID. ERROR_IPSEC_IKE_UNSUPPORTED_ID
13870 Hash verification failed. ERROR_IPSEC_IKE_INVALID_HASH
13871 Invalid hash algorithm. ERROR_IPSEC_IKE_INVALID_HASH_ALG
13872 Invalid hash size. ERROR_IPSEC_IKE_INVALID_HASH_SIZE
13873 Invalid encryption algorithm. ERROR_IPSEC_IKE_INVALID_ENCRYPT_ALG
13874 Invalid authentication algorithm. ERROR_IPSEC_IKE_INVALID_AUTH_ALG
13875 Invalid certificate signature. ERROR_IPSEC_IKE_INVALID_SIG
13876 Load failed. ERROR_IPSEC_IKE_LOAD_FAILED
13877 Deleted via RPC call. ERROR_IPSEC_IKE_RPC_DELETE
13878 Temporary state created to perform reinit. This is not a real failure. ERROR_IPSEC_IKE_BENIGN_REINIT
13879 The lifetime value received in the Responder Lifetime Notify is below the Windows 2000 configured minimum value. Please fix the policy on the peer machine. ERROR_IPSEC_IKE_INVALID_RESPONDER_LIFETIME_NOTIFY
13881 Key length in certificate is too small for configured security requirements. ERROR_IPSEC_IKE_INVALID_CERT_KEYLEN
13882 Max number of established MM SAs to peer exceeded. ERROR_IPSEC_IKE_MM_LIMIT
13883 IKE received a policy that disables negotiation. ERROR_IPSEC_IKE_NEGOTIATION_DISABLED
13884 ERROR_IPSEC_IKE_NEG_STATUS_END ERROR_IPSEC_IKE_NEG_STATUS_END
14000 The requested section was not present in the activation context. ERROR_SXS_SECTION_NOT_FOUND
14001 This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem. ERROR_SXS_CANT_GEN_ACTCTX
14002 The application binding data format is invalid. ERROR_SXS_INVALID_ACTCTXDATA_FORMAT
14003 The referenced assembly is not installed on your system. ERROR_SXS_ASSEMBLY_NOT_FOUND
14004 The manifest file does not begin with the required tag and format information. ERROR_SXS_MANIFEST_FORMAT_ERROR
14005 The manifest file contains one or more syntax errors. ERROR_SXS_MANIFEST_PARSE_ERROR
14006 The application attempted to activate a disabled activation context. ERROR_SXS_ACTIVATION_CONTEXT_DISABLED
14007 The requested lookup key was not found in any active activation context. ERROR_SXS_KEY_NOT_FOUND
14008 A component version required by the application conflicts with another component version already active. ERROR_SXS_VERSION_CONFLICT
14009 The type requested activation context section does not match the query API used. ERROR_SXS_WRONG_SECTION_TYPE
14010 Lack of system resources has required isolated activation to be disabled for the current thread of execution. ERROR_SXS_THREAD_QUERIES_DISABLED
14011 An attempt to set the process default activation context failed because the process default activation context was already set. ERROR_SXS_PROCESS_DEFAULT_ALREADY_SET
14012 The encoding group identifier specified is not recognized. ERROR_SXS_UNKNOWN_ENCODING_GROUP
14013 The encoding requested is not recognized. ERROR_SXS_UNKNOWN_ENCODING
14014 The manifest contains a reference to an invalid URI. ERROR_SXS_INVALID_XML_NAMESPACE_URI
14015 The application manifest contains a reference to a dependent assembly which is not installed. ERROR_SXS_ROOT_MANIFEST_DEPENDENCY_NOT_INSTALLED
14016 The manifest for an assembly used by the application has a reference to a dependent assembly which is not installed. ERROR_SXS_LEAF_MANIFEST_DEPENDENCY_NOT_INSTALLED
14017 The manifest contains an attribute for the assembly identity which is not valid. ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE
14018 The manifest is missing the required default namespace specification on the assembly element. ERROR_SXS_MANIFEST_MISSING_REQUIRED_DEFAULT_NAMESPACE
14019 The manifest has a default namespace specified on the assembly element but its value is not "urn:schemas-microsoft-com:asm.v1". ERROR_SXS_MANIFEST_INVALID_REQUIRED_DEFAULT_NAMESPACE
14020 The private manifest probe has crossed the reparse-point-associated path. ERROR_SXS_PRIVATE_MANIFEST_CROSS_PATH_WITH_REPARSE_POINT
14021 Two or more components referenced directly or indirectly by the application manifest have files by the same name. ERROR_SXS_DUPLICATE_DLL_NAME
14022 Two or more components referenced directly or indirectly by the application manifest have window classes with the same name. ERROR_SXS_DUPLICATE_WINDOWCLASS_NAME
14023 Two or more components referenced directly or indirectly by the application manifest have the same COM server CLSIDs. ERROR_SXS_DUPLICATE_CLSID
14024 Two or more components referenced directly or indirectly by the application manifest have proxies for the same COM interface IIDs. ERROR_SXS_DUPLICATE_IID
14025 Two or more components referenced directly or indirectly by the application manifest have the same COM type library TLBIDs. ERROR_SXS_DUPLICATE_TLBID
14026 Two or more components referenced directly or indirectly by the application manifest have the same COM ProgIDs. ERROR_SXS_DUPLICATE_PROGID
14027 Two or more components referenced directly or indirectly by the application manifest are different versions of the same component which is not permitted. ERROR_SXS_DUPLICATE_ASSEMBLY_NAME
14028 A component's file does not match the verification information present in the component manifest. ERROR_SXS_FILE_HASH_MISMATCH
14029 The policy manifest contains one or more syntax errors. ERROR_SXS_POLICY_PARSE_ERROR
14030 Manifest Parse Error : A string literal was expected, but no opening quote character was found. ERROR_SXS_XML_E_MISSINGQUOTE
14031 Manifest Parse Error : Incorrect syntax was used in a comment. ERROR_SXS_XML_E_COMMENTSYNTAX
14032 Manifest Parse Error : A name was started with an invalid character. ERROR_SXS_XML_E_BADSTARTNAMECHAR
14033 Manifest Parse Error : A name contained an invalid character. ERROR_SXS_XML_E_BADNAMECHAR
14034 Manifest Parse Error : A string literal contained an invalid character. ERROR_SXS_XML_E_BADCHARINSTRING
14035 Manifest Parse Error : Invalid syntax for an XML declaration. ERROR_SXS_XML_E_XMLDECLSYNTAX
14036 Manifest Parse Error : An invalid character was found in text content. ERROR_SXS_XML_E_BADCHARDATA
14037 Manifest Parse Error : Required white space was missing. ERROR_SXS_XML_E_MISSINGWHITESPACE
14038 Manifest Parse Error : The character '>' was expected. ERROR_SXS_XML_E_EXPECTINGTAGEND
14039 Manifest Parse Error : A semi colon character was expected. ERROR_SXS_XML_E_MISSINGSEMICOLON
14040 Manifest Parse Error : Unbalanced parentheses. ERROR_SXS_XML_E_UNBALANCEDPAREN
14041 Manifest Parse Error : Internal error. ERROR_SXS_XML_E_INTERNALERROR
14042 Manifest Parse Error : White space is not allowed at this location. ERROR_SXS_XML_E_UNEXPECTED_WHITESPACE
14043 Manifest Parse Error : End of file reached in invalid state for current encoding. ERROR_SXS_XML_E_INCOMPLETE_ENCODING
14044 Manifest Parse Error : Missing parenthesis. ERROR_SXS_XML_E_MISSING_PAREN
14045 Manifest Parse Error : A single or double closing quote character (/' or /") is missing. ERROR_SXS_XML_E_EXPECTINGCLOSEQUOTE
14046 Manifest Parse Error : Multiple colons are not allowed in a name. ERROR_SXS_XML_E_MULTIPLE_COLONS
14047 Manifest Parse Error : Invalid character for decimal digit. ERROR_SXS_XML_E_INVALID_DECIMAL
14048 Manifest Parse Error : Invalid character for hexadecimal digit. ERROR_SXS_XML_E_INVALID_HEXIDECIMAL
14049 Manifest Parse Error : Invalid Unicode character value for this platform. ERROR_SXS_XML_E_INVALID_UNICODE
14050 Manifest Parse Error : Expecting white space or '?'. ERROR_SXS_XML_E_WHITESPACEORQUESTIONMARK
14051 Manifest Parse Error : End tag was not expected at this location. ERROR_SXS_XML_E_UNEXPECTEDENDTAG
14052 Manifest Parse Error : The following tags were not closed: %1. ERROR_SXS_XML_E_UNCLOSEDTAG
14053 Manifest Parse Error : Duplicate attribute. ERROR_SXS_XML_E_DUPLICATEATTRIBUTE
14054 Manifest Parse Error : Only one top level element is allowed in an XML document. ERROR_SXS_XML_E_MULTIPLEROOTS
14055 Manifest Parse Error : Invalid at the top level of the document. ERROR_SXS_XML_E_INVALIDATROOTLEVEL
14056 Manifest Parse Error : Invalid XML declaration. ERROR_SXS_XML_E_BADXMLDECL
14057 Manifest Parse Error : XML document must have a top level element. ERROR_SXS_XML_E_MISSINGROOT
14058 Manifest Parse Error : Unexpected end of file. ERROR_SXS_XML_E_UNEXPECTEDEOF
14059 Manifest Parse Error : Parameter entities cannot be used inside markup declarations in an internal subset. ERROR_SXS_XML_E_BADPEREFINSUBSET
14060 Manifest Parse Error : Element was not closed. ERROR_SXS_XML_E_UNCLOSEDSTARTTAG
14061 Manifest Parse Error : End element was missing the character '>'. ERROR_SXS_XML_E_UNCLOSEDENDTAG
14062 Manifest Parse Error : A string literal was not closed. ERROR_SXS_XML_E_UNCLOSEDSTRING
14063 Manifest Parse Error : A comment was not closed. ERROR_SXS_XML_E_UNCLOSEDCOMMENT
14064 Manifest Parse Error : A declaration was not closed. ERROR_SXS_XML_E_UNCLOSEDDECL
14065 Manifest Parse Error : A CDATA section was not closed. ERROR_SXS_XML_E_UNCLOSEDCDATA
14066 Manifest Parse Error : The namespace prefix is not allowed to start with the reserved string "xml". ERROR_SXS_XML_E_RESERVEDNAMESPACE
14067 Manifest Parse Error : System does not support the specified encoding. ERROR_SXS_XML_E_INVALIDENCODING
14068 Manifest Parse Error : Switch from current encoding to specified encoding not supported. ERROR_SXS_XML_E_INVALIDSWITCH
14069 Manifest Parse Error : The name 'xml' is reserved and must be lower case. ERROR_SXS_XML_E_BADXMLCASE
14070 Manifest Parse Error : The standalone attribute must have the value 'yes' or 'no'. ERROR_SXS_XML_E_INVALID_STANDALONE
14071 Manifest Parse Error : The standalone attribute cannot be used in external entities. ERROR_SXS_XML_E_UNEXPECTED_STANDALONE
14072 Manifest Parse Error : Invalid version number. ERROR_SXS_XML_E_INVALID_VERSION
14073 Manifest Parse Error : Missing equals sign between attribute and attribute value. ERROR_SXS_XML_E_MISSINGEQUALS
14074 Assembly Protection Error: Unable to recover the specified assembly. ERROR_SXS_PROTECTION_RECOVERY_FAILED
14075 Assembly Protection Error: The public key for an assembly was too short to be allowed. ERROR_SXS_PROTECTION_PUBLIC_KEY_TOO_SHORT
14076 Assembly Protection Error: The catalog for an assembly is not valid, or does not match the assembly's manifest. ERROR_SXS_PROTECTION_CATALOG_NOT_VALID
14077 An HRESULT could not be translated to a corresponding Win32 error code. ERROR_SXS_UNTRANSLATABLE_HRESULT
14078 Assembly Protection Error: The catalog for an assembly is missing. ERROR_SXS_PROTECTION_CATALOG_FILE_MISSING
14079 The supplied assembly identity is missing one or more attributes which must be present in this context. ERROR_SXS_MISSING_ASSEMBLY_IDENTITY_ATTRIBUTE
14080 The supplied assembly identity has one or more attribute names that contain characters not permitted in XML names. ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE_NAME