怎樣實現一個同sp_executesql支持變量傳參功能的存儲過程

--以05環境實現方法
--2000同樣臨時表實現方法相同!! 动态语句语法同sp_executesql相同 --以sp開頭在master生成，其它庫可能直接調用  

use master
go
if object_id('Sp_ExecSQL') is not null
	drop proc Sp_ExecSQL
go
/*********************************************************************************************************
注:日期類型要準確性，用字符串傳入或字符串輸出(同sp_executesql同樣存在的問題)
限制变量不能把'@'需要改为'@a' 在@变量符后要加下其它符号
以10參數為例，寫一下實現方法
作者：中國風(Roy)
日期:2008.06.19
*********************************************************************************************************/
create proc Sp_ExecSQL(
				@s nvarchar(4000)=N'',
				@input nvarchar(1000)='',
				@Parameter1 nvarchar(4000)=null output,
				@Parameter2 nvarchar(4000)=null output,
				@Parameter3 nvarchar(4000)=null output,
				@Parameter4 nvarchar(4000)=null output,
				@Parameter5 nvarchar(4000)=null output,
				@Parameter6 nvarchar(4000)=null output,
				@Parameter7 nvarchar(4000)=null output,
				@Parameter8 nvarchar(4000)=null output,
				@Parameter9 nvarchar(4000)=null output,
				@Parameter10 nvarchar(4000)=null output)
as
set nocount on;
begin try
begin tran
declare @dec nvarchar(4000),@set nvarchar(4000),@update nvarchar(4000),@error nvarchar(200)
select @input=replace(replace(@input,nchar(13)+nchar(10),nchar(32)),nchar(9),nchar(32))

while charindex(nchar(32)+nchar(32),@input)>0
	select @input=replace(@input,nchar(32)+nchar(32),nchar(32))
while charindex(nchar(32)+'@',@input)>0
	select @input=replace(@input,nchar(32)+'@','@')
while charindex('@'+nchar(32),@input)>0
	select @input=replace(@input,'@'+nchar(32),'@')

if isnull(@s,'')!>''
	return

if object_id('tempdb..#Parameter') is not null
	drop table #Parameter
select 
	Row=row_number()over(order by t2.row),
	Parameter=left(ltrim(t2.Col),charindex(nchar(32),ltrim(t2.Col)+',@')-1),
	ParaType=rtrim(stuff(ltrim(t2.Col),1,charindex(nchar(32),ltrim(t2.Col)),'')),
	[Value]=cast(null as nvarchar(4000)),
	[Flag]=cast(null as bit),
	[IsChar]=cast(null as bit)
into #Parameter
from 
	(select convert(xml,''+replace(@input,',@','@')+''))T(c)
outer apply
	(select row=1,Col=N.v.value('.','nvarchar(100)') from T.c.nodes('/root/v')N(v))T2


update #Parameter set ParaType=case when charindex(reverse(N'output'),reverse(ParaType))=1 then rtrim(left(ParaType,len(ParaType)-6))
									when charindex(reverse(N'out'),reverse(ParaType))=1 then rtrim(left(ParaType,len(ParaType)-3))
									else  ParaType end

update a
set [IsChar]=b.[IsChar],[Flag]=case when b.Name is null or (b.ID in(106,108) and patindex('%[(]%',replace(ParaType,b.Name,''))>patindex('%[0-9,)]%',replace(ParaType,b.Name,'')))
									then 1 when  b.[IsChar]=0 and b.ID not in(106,108) and ParaType<>b.Name
									then 1  else 0 end
from 
	#Parameter a
outer apply
	(select top 1 ID=user_type_id,Name,case when precision>0 and user_type_id not in(58,61) then 0 else 1 end [IsChar] from sys.types where  charindex(Name,rtrim(a.ParaType))>0 order by len(Name) desc)b

if exists(select 1 from #Parameter where [Flag]=1)
	begin
		set @error='檢查格式是否正確'
		raiserror 50001 N'#'
	end


update #Parameter 
set [Value]=case row when 1 then @Parameter1 when 2 then @Parameter2 when 3 then @Parameter3 when 4 then @Parameter4 
			when 5 then @Parameter5 when 6 then @Parameter6 when 7 then @Parameter7 when 8 then @Parameter8 
			when 9 then @Parameter9 when 10 then @Parameter10 end

select @dec='',@set='',@update=''

select 
	@dec=@dec+case when row=1 then 'Declare ' else ' ,' end +Parameter+' '+ParaType,
	@set=@set+case when row=1 then 'select ' else ' ,' end +Parameter+'='
		+case when [IsChar]=1 then isnull(quotename([Value],''''),'Null') else isnull(rtrim([Value]),'Null') end,	
	@update=@update+case when row=1 then 'Update #Parameter set [Value]= case Row when ' else ' when ' end+rtrim(Row)+' then rtrim('+Parameter+')'
from 
	#Parameter
order by row asc

exec(@dec+' '+@set+' '+@s+' '+@update+' end')

set @Parameter1= (select [Value] from  #Parameter where row=1)
set @Parameter2= (select [Value] from  #Parameter where row=2)
set @Parameter3= (select [Value] from  #Parameter where row=3)
set @Parameter4= (select [Value] from  #Parameter where row=4)
set @Parameter5= (select [Value] from  #Parameter where row=5)
set @Parameter6= (select [Value] from  #Parameter where row=6)
set @Parameter7= (select [Value] from  #Parameter where row=7)
set @Parameter8= (select [Value] from  #Parameter where row=8)
set @Parameter9= (select [Value] from  #Parameter where row=9)
set @Parameter10=(select [Value] from  #Parameter where row=10)

commit tran
end try
begin catch
	set @error=isnull(@error,ERROR_MESSAGE())
	rollback tran
	raiserror 50001 @error
end catch

go
exec sp_ms_marksystemobject 'Sp_ExecSQL'
go

declare @i int,@Name sysname,@j decimal(18,5)
select @i=100
exec sp_execsql N'select @j=count(1) from sysobjects where ID>@char','	 @	char int		, @j decimal (18,5)   output	',@i,@j output
select @j