第十一节
VDO虚拟数据优化
VDO（Virtual Data Optimize，虚拟数据优化）是一种通过压缩或删除存储设备上的数据来优化存储空间的技术。VDO是红帽公司收购了Permabit公司后获取的新技术，并与2019-2020年前后，多次在RHEL 7.5/7.6/7.7上进行测试，最终随RHEL 8系统正式公布。VDO技术的关键就是对硬盘内原有的数据进行删重操作，它有点类似于我们平时使用的网盘服务，在第一次正常上传文件时速度特别慢，在第二次上传相同的文件时仅作为一个数据指针，几乎可以达到“秒传”的效果，无须再多占用一份空间，也不用再漫长等待。除了删重操作，VDO技术还可以对日志和数据库进行自动压缩，进一步减少存储浪费的情况。
VDO技术支持本地存储和远程存储，可以作为本地文件系统、iSCSI或Ceph存储下的附加存储层使用。红帽公司在VDO介绍页面中提到，在部署虚拟机或容器时，建议采用逻辑存储与物理存储为10∶1的比例进行配置，即1TB物理存储对应10TB逻辑存储；而部署对象存储时 （例如使用Ceph）则采用逻辑存储与物理存储为3∶1的比例进行配置，即使用1TB物理存储对应3TB逻辑存储。
有两种特殊情况需要提前讲一下。
其一，公司服务器上已有的dm-crypt之类的技术是可以与VDO技术兼容的，但记得要先对卷进行加密再使用VDO。因为加密会使重复的数据变得有所不同，因此删重操作无法实现。要始终记得把加密层放到VDO之下，如图所示。
其二，VDO技术不可叠加使用，1TB的物理存储提升成10TB的逻辑存储没问题，但是再用10TB翻成100TB就不行了。左脚踩右脚，真的没法飞起来。
添加一块容量为20GB的新SATA硬盘进来。
[root@linuxprobe ~]# ls -l /dev/sdc brw-rw----. 1 root disk 8, 32 Jan 6 22:26 /dev/sdc
RHEL/CentOS 8系统中默认已经启用了VDO技术。VDO技术现在是红帽公司自己的技术，兼容性自然没得说。如果您所用的系统没有安装VDO的话也不要着急，用dnf命令即可完成安装：
[root@linuxprobe ~]# dnf install kmod-kvdo vdo
Updating Subscription Management repositories.
Unable to read consumer identity
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Last metadata expiration check: 0:01:56 ago on Wed 06 Jan 2021 10:37:19 PM CST.
Package kmod-kvdo-6.2.0.293-50.el8.x86_64 is already installed.
Package vdo-6.2.0.293-10.el8.x86_64 is already installed.
Dependencies resolved.
Nothing to do.
Complete!
首先，创建一个全新的VDO卷。
新添加进来的物理设备就是使用vdo命令来管理的，其中name参数代表新的设备卷的名称；device参数代表由哪块磁盘进行制作；vdoLogicalSize参数代表制作后的设备大小。依据红帽公司推荐的原则，20GB硬盘将翻成200GB的逻辑存储：
[root@superwu ~]# vdo create --name=hehe --device=/dev/sdc --vdoLogicalSize=200G
//从/dev/sdc创建一个hehe的VDO卷大小为200G,vdoLogicalSize参数中的L与S字母必须大写 Creating VDO storage Starting VDO storage Starting compression on VDO storage VDO instance 0 volume is ready at /dev/mapper/hehe
在创建成功后，使用status参数查看新建卷的概述信息：
[root@superwu ~]# vdo status --name=hehe //查看卷信息
VDO status:
Date: '2022-02-07 18:46:02+08:00'
Node: superwu.10
Kernel module:
Loaded: true
Name: kvdo
Version information:
kvdo version: 6.2.0.293
Configuration:
File: /etc/vdoconf.yml
Last modified: '2022-02-07 18:44:25'
VDOs:
hehe:
Acknowledgement threads: 1
Activate: enabled
Bio rotation interval: 64
Bio submission threads: 4
Block map cache size: 128M
Block map period: 16380
Block size: 4096
CPU-work threads: 2
Compression: enabled //是否压缩
Configured write policy: auto
Deduplication: enabled //是否删重
Device mapper status: 0 419430400 vdo /dev/sdc normal - online online 1051408 5242880
Emulate 512 byte: disabled
Hash zone threads: 1
Index checkpoint frequency: 0
Index memory setting: 0.25
Index parallel factor: 0
Index sparse: disabled
Index status: online
Logical size: 200G
Logical threads: 1
Max discard size: 4K
Physical size: 20G
Physical threads: 1
Slab size: 2G
Storage device: /dev/disk/by-id/ata-
......
其次，对新建卷进行格式化操作并挂载。
新建的VDO卷设备会被乖乖地存放在/dev/mapper目录下，并以设备名称命名，对它操作就行。另外，挂载前可以用udevadm settle命令对设备进行一次刷新操作，避免刚才的配置没有生效：
[root@superwu ~]# mkfs.xfs /dev/mapper/hehe //对vdo卷进行格式化（格式化时间可能较长） meta-data=/dev/mapper/hehe isize=512 agcount=4, agsize=13107200 blks = sectsz=4096 attr=2, projid32bit=1 = crc=1 finobt=1, sparse=1, rmapbt=0 = reflink=1 data = bsize=4096 blocks=52428800, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0, ftype=1 log =internal log bsize=4096 blocks=25600, version=2 = sectsz=4096 sunit=1 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0
[root@superwu ~]#udevadm settle //刷新udev
[root@superwu ~]#mkdir /hehe //创建挂载点
[root@superwu ~]#mount /dev/mapper/hehe /hehe //将vdo文件系统挂载
将挂载信息写入/etc/fstab文件，实现开机挂载。
[root@superwu ~]# blkid /dev/mapper/hehe //对于逻辑存储设备建议使用UUID进行挂载 /dev/mapper/hehe: UUID="dd2fdad8-6c61-402b-9bb9-34745b9a2c2e" TYPE="xfs" [root@superwu ~]# vim /etc/fstab # # /etc/fstab # Created by anaconda on Tue Jan 11 03:26:57 2022 # # Accessible filesystems, by reference, are maintained under '/dev/disk/'. # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info. # # After editing this file, run 'systemctl daemon-reload' to update systemd # units generated from this file. # /dev/mapper/rhel-root / xfs defaults 0 0 UUID=d7f53471-c95f-44f2-aafe-f86bd5ecebd7 /boot xfs defaults,uquota 0 0 /dev/mapper/rhel-swap swap swap defaults 0 0 /dev/cdrom /media/cdrom iso9660 defaults 0 0 /dev/sdb1 /newFS xfs defaults 0 0 /dev/sdb2 swap swap defaults 0 0 UUID="dd2fdad8-6c61-402b-9bb9-34745b9a2c2e" /hehe xfs defaults,_netdev 0 0 //_netdev参数，表示等系统及网络都启动后再挂载VDO设备卷。
[root@superwu ~]# df -h Filesystem Size Used Avail Use% Mounted on devtmpfs 969M 0 969M 0% /dev tmpfs 984M 0 984M 0% /dev/shm tmpfs 984M 9.6M 974M 1% /run tmpfs 984M 0 984M 0% /sys/fs/cgroup /dev/mapper/rhel-root 17G 3.9G 14G 23% / /dev/sr0 6.7G 6.7G 0 100% /media/cdrom /dev/sdb1 2.0G 53M 2.0G 3% /newFS /dev/sda1 1014M 170M 845M 17% /boot tmpfs 197M 16K 197M 1% /run/user/42 tmpfs 197M 3.5M 194M 2% /run/user/0 /dev/mapper/hehe 200G 1.5G 199G 1% /hehe
然后，查看并使用vdo
查看设备的实际使用情况，使用vdostats命令即可。human-readable参数的作用是将存储容量自动进位，以人们更易读的方式输出。
[root@superwu ~]# vdostats --human-readable
Device Size Used Available Use% Space saving%
/dev/mapper/hehe 20.0G 4.0G 16.0G 20% 99%
[root@superwu ~]# ls -lh /media/cdrom/images/install.img -r--r--r--. 1 root root 448M Apr 4 2019 /media/cdrom/images/install.img [root@superwu ~]# cd /hehe/ [root@superwu hehe]# cp /media/cdrom/images/install.img /hehe/ //复制一个文件到vdo的hehe卷中。 [root@superwu hehe]# ls -lh total 448M -r--r--r--. 1 root root 448M Feb 7 19:20 install.img [root@superwu hehe]# vdostats --human-readable Device Size Used Available Use% Space saving% /dev/mapper/hehe 20.0G 4.4G 15.6G 22% 18% [root@superwu hehe]# cp /media/cdrom/images/install.img /hehe/hehe.img //复制一个相同的文件到vdo的hehe卷中。 [root@superwu hehe]# ls -lh total 896M -r--r--r--. 1 root root 448M Feb 7 19:24 hehe.img -r--r--r--. 1 root root 448M Feb 7 19:20 install.img [root@superwu hehe]# vdostats --human-readable Device Size Used Available Use% Space saving% /dev/mapper/hehe 20.0G 4.5G 15.5G 22% 55% //原先448MB的文件这次只占用了不到100MB的容量，空间节省率也从18%提升到了55%。
RAID磁盘冗余阵列
RAID技术通过把多个硬盘设备组合成一个容量更大、安全性更好的磁盘阵列，并把数据切割成多个区段后分别存放在各个不同的物理硬盘设备上，然后利用分散读写技术来提升磁盘阵列整体的性能，同时把多个重要数据的副本同步到不同的物理硬盘设备上，从而起到了非常好的数据冗余备份效果。
RAID 0、1、5、10方案技术对比
| RAID级别 | 最少硬盘 | 可用容量 | 读写性能 | 安全性 | 特点 |
| 0 | 1 | n | n | 低 | 追求最大容量和速度，任何一块盘损坏，数据全部异常。 |
| 1 | 2 | n/2 | n | 高 | 追求最大安全性，只要阵列组中有一块硬盘可用，数据不受影响。 |
| 5 | 3 | n-1 | n-1 | 中 | 在控制成本的前提下，追求硬盘的最大容量、速度及安全性，允许有一块硬盘异常，数据不受影响。 |
| 10 | 4 | n/2 | n/2 | 高 | 综合RAID1和RAID0的优点，追求硬盘的速度和安全性，允许有一半硬盘异常（不可同组），数据不受影响 |
部署磁盘阵列
mdadm命令用于创建、调整、监控和管理RAID设备，英文全称为“multiple devices admin”，语法格式为“mdadm参数 硬盘名称”。
mdadm命令中的常用参数及作用如表所示
| 参数 | 作用 |
| -a | 检测设备名称 |
| -n | 指定设备数量 |
| -l | 指定RAID级别 |
| -C | 创建 |
| -v | 显示过程 |
| -f | 模拟设备损坏 |
| -r | 移除设备 |
| -Q | 查看摘要信息 |
| -D | 查看详细信息 |
| -S | 停止RAID磁盘阵列 |
创建RAID 10
1.创建RAID磁盘阵列
[root@superwu ~]# mdadm -Cv /dev/md/hoho -n 4 -l 10 /dev/sd[b-e] //在/dev/md目录下创建hoho阵列（默认没有md目录，创建阵列时会自动创建，且阵列卡必须在md目录下创建），使用sdb-e磁盘（也可以将硬盘单独写出/dev/sdb /dev/sdc /dev/sdd /dev/sde） mdadm: layout defaults to n2 mdadm: layout defaults to n2 mdadm: chunk size defaults to 512K mdadm: size set to 20954112K mdadm: Defaulting to version 1.2 metadata mdadm: array /dev/md/hoho started. [root@superwu md]# mdadm -Q /dev/md/hoho //磁盘阵列创建需要几分钟，查看阵列信息，-D可查看详细信息。 /dev/md/hoho: 39.97GiB raid10 4 devices, 0 spares. Use mdadm --detail for more detail.
2.格式化磁盘阵列
注意：创建磁盘阵列需要时间，建议等待几分钟或者查看阵列状态正常后进行格式化操作。
[root@superwu md]# mkfs.ext4 /dev/md/hoho
mke2fs 1.44.3 (10-July-2018)
Creating filesystem with 10477056 4k blocks and 2621440 inodes
Filesystem UUID: face2652-48c3-4883-9260-12fa11976a97
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624
Allocating group tables: done
Writing inode tables: done
Creating journal (65536 blocks): done
Writing superblocks and filesystem accounting information: done
3.挂载磁盘阵列
[root@superwu md]# mkdir /hoho //创建挂载点 [root@superwu md]# mount /dev/md/hoho /hoho [root@superwu md]# df -h Filesystem Size Used Avail Use% Mounted on devtmpfs 969M 0 969M 0% /dev tmpfs 984M 0 984M 0% /dev/shm tmpfs 984M 9.6M 974M 1% /run tmpfs 984M 0 984M 0% /sys/fs/cgroup /dev/mapper/rhel-root 17G 3.9G 14G 23% / /dev/sr0 6.7G 6.7G 0 100% /media/cdrom /dev/sda1 1014M 152M 863M 15% /boot tmpfs 197M 16K 197M 1% /run/user/42 tmpfs 197M 3.5M 194M 2% /run/user/0 /dev/md127 40G 49M 38G 1% /hoho [root@superwu md]# echo "/dev/md/hoho /hoho ext4 defaults 0 0" >> /etc/fstab //将挂载信息写入配置文件，实现开机自动挂载。 [root@superwu md]# cat /etc/fstab # # /etc/fstab # Created by anaconda on Tue Jan 11 03:26:57 2022 # # Accessible filesystems, by reference, are maintained under '/dev/disk/'. # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info. # # After editing this file, run 'systemctl daemon-reload' to update systemd # units generated from this file. # /dev/mapper/rhel-root / xfs defaults 0 0 UUID=d7f53471-c95f-44f2-aafe-f86bd5ecebd7 /boot xfs defaults 0 0 /dev/mapper/rhel-swap swap swap defaults 0 0 /dev/cdrom /media/cdrom iso9660 defaults 0 0 /dev/md/hoho /hoho ext4 defaults 0 0 [root@superwu md]# mdadm -D /dev/md/hoho //查看磁盘阵列详细信息 /dev/md/hoho: Version : 1.2 Creation Time : Wed Feb 9 18:35:22 2022 Raid Level : raid10 Array Size : 41908224 (39.97 GiB 42.91 GB) Used Dev Size : 20954112 (19.98 GiB 21.46 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Wed Feb 9 18:53:54 2022 State : clean Active Devices : 4 Working Devices : 4 Failed Devices : 0 Spare Devices : 0 Layout : near=2 Chunk Size : 512K Consistency Policy : resync Name : superwu.10:hoho (local to host superwu.10) UUID : 6af87cfc:47705900:20fcf416:eeac2363 Events : 17 Number Major Minor RaidDevice State 0 8 16 0 active sync set-A /dev/sdb 1 8 32 1 active sync set-B /dev/sdc 2 8 48 2 active sync set-A /dev/sdd 3 8 64 3 active sync set-B /dev/sde
磁盘阵列故障盘处理
磁盘阵列中如果有硬盘出现故障，需要及时更换，负责会造成数据丢失风险。
1.模拟硬盘故障
虚拟机环境需要模拟硬盘损坏
[root@superwu md]# mdadm /dev/md/hoho -f /dev/sdc //模拟一块硬盘失效 mdadm: set /dev/sdc faulty in /dev/md/hoho [root@superwu md]# mdadm -D /dev/md/hoho /dev/md/hoho: Version : 1.2 Creation Time : Wed Feb 9 18:35:22 2022 Raid Level : raid10 Array Size : 41908224 (39.97 GiB 42.91 GB) Used Dev Size : 20954112 (19.98 GiB 21.46 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Wed Feb 9 19:12:37 2022 State : clean, degraded Active Devices : 3 Working Devices : 3 Failed Devices : 1 Spare Devices : 0 Layout : near=2 Chunk Size : 512K Consistency Policy : resync Name : superwu.10:hoho (local to host superwu.10) UUID : 6af87cfc:47705900:20fcf416:eeac2363 Events : 19 Number Major Minor RaidDevice State 0 8 16 0 active sync set-A /dev/sdb - 0 0 1 removed 2 8 48 2 active sync set-A /dev/sdd 3 8 64 3 active sync set-B /dev/sde 1 8 32 - faulty /dev/sdc
2.将故障硬盘从阵列中移除
[root@superwu md]# mdadm /dev/md/hoho -r /dev/sdc //-r移除磁盘 mdadm: hot removed /dev/sdc from /dev/md/hoho [root@superwu md]# mdadm -D /dev/md/hoho /dev/md/hoho: Version : 1.2 Creation Time : Wed Feb 9 18:35:22 2022 Raid Level : raid10 Array Size : 41908224 (39.97 GiB 42.91 GB) Used Dev Size : 20954112 (19.98 GiB 21.46 GB) Raid Devices : 4 Total Devices : 3 Persistence : Superblock is persistent Update Time : Wed Feb 9 19:16:27 2022 State : clean, degraded Active Devices : 3 Working Devices : 3 Failed Devices : 0 Spare Devices : 0 Layout : near=2 Chunk Size : 512K Consistency Policy : resync Name : superwu.10:hoho (local to host superwu.10) UUID : 6af87cfc:47705900:20fcf416:eeac2363 Events : 20 Number Major Minor RaidDevice State 0 8 16 0 active sync set-A /dev/sdb - 0 0 1 removed 2 8 48 2 active sync set-A /dev/sdd 3 8 64 3 active sync set-B /dev/sde
// /dev/md/hoho阵列中已经没有了/dev/sdc硬盘。
3.更换硬盘
注意：在生产环境中，服务器一般都使用RAID卡，对于RAID1、10会自动同步。
[root@superwu md]# mdadm /dev/md/hoho -a /dev/sdc //更换硬盘后，将新硬盘加入到阵列中，-a添加 mdadm: added /dev/sdc [root@superwu md]# mdadm -D /dev/md/hoho /dev/md/hoho: Version : 1.2 Creation Time : Wed Feb 9 18:35:22 2022 Raid Level : raid10 Array Size : 41908224 (39.97 GiB 42.91 GB) Used Dev Size : 20954112 (19.98 GiB 21.46 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Wed Feb 9 19:25:14 2022 State : clean, degraded, recovering Active Devices : 3 Working Devices : 4 Failed Devices : 0 Spare Devices : 1 Layout : near=2 Chunk Size : 512K Consistency Policy : resync Rebuild Status : 15% complete Name : superwu.10:hoho (local to host superwu.10) UUID : 6af87cfc:47705900:20fcf416:eeac2363 Events : 24 Number Major Minor RaidDevice State 0 8 16 0 active sync set-A /dev/sdb 4 8 32 1 spare rebuilding /dev/sdc //此时raid正在重构，重构需要时间，重构时间与磁盘大小有关。 2 8 48 2 active sync set-A /dev/sdd 3 8 64 3 active sync set-B /dev/sde
磁盘阵列+备份盘
RAID5+备份盘
备份盘的核心理念就是准备一块足够大的硬盘，这块硬盘平时处于闲置状态，一旦RAID磁盘阵列中有硬盘出现故障后则会马上自动顶替上去。
注意：备份盘的大小应等于或大于RAID成员盘。
1.创建磁盘阵列
[root@superwu ~]# mdadm -Cv /dev/md/hehe -n 3 -l 5 -x 1 /dev/sdb /dev/sdc /dev/sdd /dev/sde //-x 表示有一块备份盘 mdadm: layout defaults to left-symmetric mdadm: layout defaults to left-symmetric mdadm: chunk size defaults to 512K mdadm: size set to 20954112K mdadm: Defaulting to version 1.2 metadata mdadm: array /dev/md/hehe started. [root@superwu ~]# mdadm -D /dev/md/hehe /dev/md/hehe: Version : 1.2 Creation Time : Wed Feb 9 23:25:36 2022 Raid Level : raid5 Array Size : 41908224 (39.97 GiB 42.91 GB) Used Dev Size : 20954112 (19.98 GiB 21.46 GB) Raid Devices : 3 Total Devices : 4 Persistence : Superblock is persistent Update Time : Wed Feb 9 23:25:43 2022 State : clean, degraded, recovering Active Devices : 2 Working Devices : 4 Failed Devices : 0 Spare Devices : 2 Layout : left-symmetric Chunk Size : 512K Consistency Policy : resync Rebuild Status : 12% complete Name : superwu.10:hehe (local to host superwu.10) UUID : 2bb20f83:f96626bb:04d1ccd4:fc94809e Events : 2 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 8 32 1 active sync /dev/sdc 4 8 48 2 active sync /dev/sdd 3 8 64 - spare /dev/sde
2.格式化磁盘阵列
[root@superwu ~]# mkfs.ext4 /dev/md/hehe
mke2fs 1.44.3 (10-July-2018)
Creating filesystem with 10477056 4k blocks and 2621440 inodes
Filesystem UUID: 65b5dd45-b4a7-4db8-b5d9-1331a95b4fba
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624
Allocating group tables: done
Writing inode tables: done
Creating journal (65536 blocks): done
Writing superblocks and filesystem accounting information: done
3.挂载磁盘阵列
[root@superwu ~]# mkdir /opt/hehe [root@superwu ~]# mount /dev/md/hehe /opt/hehe/ [root@superwu ~]# df -h Filesystem Size Used Avail Use% Mounted on devtmpfs 969M 0 969M 0% /dev tmpfs 984M 0 984M 0% /dev/shm tmpfs 984M 9.6M 974M 1% /run tmpfs 984M 0 984M 0% /sys/fs/cgroup /dev/mapper/rhel-root 17G 3.9G 14G 23% / /dev/sr0 6.7G 6.7G 0 100% /media/cdrom /dev/sda1 1014M 152M 863M 15% /boot tmpfs 197M 16K 197M 1% /run/user/42 tmpfs 197M 3.5M 194M 2% /run/user/0 /dev/md127 40G 49M 38G 1% /opt/hehe [root@superwu ~]# echo "/dev/md/hehe /opt/hehe ext4 defaults 0 0" >> /etc/fstab //加入开机自动挂载
当RAID中的硬盘故障时，备份盘会立即自动顶替故障盘。
[root@superwu ~]# mdadm /dev/md/hehe -f /dev/sdb //模拟sdb盘故障 mdadm: set /dev/sdb faulty in /dev/md/hehe [root@superwu ~]# mdadm -D /dev/md/hehe /dev/md/hehe: Version : 1.2 Creation Time : Wed Feb 9 23:25:36 2022 Raid Level : raid5 Array Size : 41908224 (39.97 GiB 42.91 GB) Used Dev Size : 20954112 (19.98 GiB 21.46 GB) Raid Devices : 3 Total Devices : 4 Persistence : Superblock is persistent Update Time : Wed Feb 9 23:42:59 2022 State : clean, degraded, recovering Active Devices : 2 Working Devices : 3 Failed Devices : 1 Spare Devices : 1 Layout : left-symmetric Chunk Size : 512K Consistency Policy : resync Rebuild Status : 1% complete Name : superwu.10:hehe (local to host superwu.10) UUID : 2bb20f83:f96626bb:04d1ccd4:fc94809e Events : 20 Number Major Minor RaidDevice State 3 8 64 0 spare rebuilding /dev/sde //sde自动顶替故障盘，并开始同步数据 1 8 32 1 active sync /dev/sdc 4 8 48 2 active sync /dev/sdd 0 8 16 - faulty /dev/sdb
删除磁盘阵列
1.卸载磁盘阵列，停用成员盘
[root@superwu ~]# umount /opt/hehe //卸载阵列 [root@superwu ~]# df -h Filesystem Size Used Avail Use% Mounted on devtmpfs 969M 0 969M 0% /dev tmpfs 984M 0 984M 0% /dev/shm tmpfs 984M 9.6M 974M 1% /run tmpfs 984M 0 984M 0% /sys/fs/cgroup /dev/mapper/rhel-root 17G 3.9G 14G 23% / /dev/sr0 6.7G 6.7G 0 100% /media/cdrom /dev/sda1 1014M 152M 863M 15% /boot tmpfs 197M 16K 197M 1% /run/user/42 tmpfs 197M 3.5M 194M 2% /run/user/0 [root@superwu ~]# mdadm /dev/md/hehe -f /dev/sdb mdadm: set /dev/sdb faulty in /dev/md/hehe [root@superwu ~]# mdadm /dev/md/hehe -f /dev/sdc mdadm: set /dev/sdc faulty in /dev/md/hehe [root@superwu ~]# mdadm /dev/md/hehe -f /dev/sde mdadm: set /dev/sde faulty in /dev/md/hehe [root@superwu ~]# mdadm /dev/md/hehe -f /dev/sdd mdadm: set /dev/sdd faulty in /dev/md/hehe [root@superwu ~]# mdadm -D /dev/md/hehe /dev/md/hehe: Version : 1.2 Creation Time : Wed Feb 9 23:25:36 2022 Raid Level : raid5 Array Size : 41908224 (39.97 GiB 42.91 GB) Used Dev Size : 20954112 (19.98 GiB 21.46 GB) Raid Devices : 3 Total Devices : 4 Persistence : Superblock is persistent Update Time : Wed Feb 9 23:52:31 2022 State : clean, FAILED Active Devices : 0 Failed Devices : 4 Spare Devices : 0 Layout : left-symmetric Chunk Size : 512K Consistency Policy : resync Number Major Minor RaidDevice State - 0 0 0 removed - 0 0 1 removed - 0 0 2 removed 0 8 16 - faulty /dev/sdb 1 8 32 - faulty /dev/sdc 3 8 64 - faulty /dev/sde 4 8 48 - faulty /dev/sdd
2.移除成员盘
[root@superwu ~]# mdadm /dev/md/hehe -r /dev/sdb mdadm: hot removed /dev/sdb from /dev/md/hehe [root@superwu ~]# mdadm /dev/md/hehe -r /dev/sdc mdadm: hot removed /dev/sdc from /dev/md/hehe [root@superwu ~]# mdadm /dev/md/hehe -r /dev/sdd mdadm: hot removed /dev/sdd from /dev/md/hehe [root@superwu ~]# mdadm /dev/md/hehe -r /dev/sde mdadm: hot removed /dev/sde from /dev/md/hehe [root@superwu ~]# mdadm -D /dev/md/hehe /dev/md/hehe: Version : 1.2 Creation Time : Wed Feb 9 23:25:36 2022 Raid Level : raid5 Array Size : 41908224 (39.97 GiB 42.91 GB) Used Dev Size : 20954112 (19.98 GiB 21.46 GB) Raid Devices : 3 Total Devices : 0 Persistence : Superblock is persistent Update Time : Wed Feb 9 23:55:36 2022 State : clean, FAILED Active Devices : 0 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 512K Consistency Policy : resync Number Major Minor RaidDevice State - 0 0 0 removed - 0 0 1 removed - 0 0 2 removed
3.停用磁盘阵列
[root@superwu ~]# mdadm --stop /dev/md/hehe
mdadm: stopped /dev/md/hehe
[root@superwu ~]# ls -l /dev/md/hehe
ls: cannot access '/dev/md/hehe': No such file or directory
LVM逻辑卷
LVM技术是在硬盘分区和文件系统之间添加了一个逻辑层，它提供了一个抽象的卷组，可以把多块硬盘进行卷组合并。这样一来，用户不必关心物理硬盘设备的底层架构和布局，就可以实现对硬盘分区的动态调整。
物理卷：Physical Volume，PV
卷组：Volume Group，VG
逻辑卷：Logical Volume，LV
基本单元：Physical Extent，PE，PE大小一般为4M。
注意：逻辑卷的大小一定是PE的倍数，即逻辑卷是由若干个PE组成。
部署逻辑卷
常用的LVM部署命令
| 功能/命令 | 物理卷管理 | 卷组管理 | 逻辑卷管理 |
| 扫描 | pvscan | vgscan | lvscan |
| 建立 | pvcreate | vgcreate | lvcreate |
| 显示 | pvdisplay | vgdisplay | lvdisplay |
| 删除 | pvremove | vgremove | lvremove |
| 扩展 | vgextend | lvextend | |
| 缩小 | vgreduce | lvreduce |
1.创建物理卷
[root@superwu10 ~]# pvcreate /dev/sdb /dev/sdc //对硬盘创建物理卷
Physical volume "/dev/sdb" successfully created.
Physical volume "/dev/sdc" successfully created.
2.创建卷组
[root@superwu10 ~]# vgcreate hehe /dev/sdb /dev/sdc //创建卷组hehe，并将硬盘加入卷组
Volume group "hehe" successfully created
[root@superwu10 ~]# ls -ld /dev/hehe //卷组会自动在/dev目录中创建 drwxr-xr-x. 2 root root 80 Feb 10 06:58 /dev/hehe
[root@superwu10 ~]# vgdisplay //查看卷组信息
--- Volume group ---
VG Name hehe
System ID
Format lvm2
Metadata Areas 2
Metadata Sequence No 1
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 0
Open LV 0
Max PV 0
Cur PV 2
Act PV 2
VG Size 39.99 GiB
PE Size 4.00 MiB
Total PE 10238
Alloc PE / Size 0 / 0
Free PE / Size 10238 / 39.99 GiB
VG UUID Cma6sp-KXTQ-SoVz-xQ5c-rXCt-IrhY-nPdrVc
--- Volume group ---
VG Name rhel
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 3
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 2
Open LV 2
Max PV 0
Cur PV 1
Act PV 1
VG Size <19.00 GiB
PE Size 4.00 MiB
Total PE 4863
Alloc PE / Size 4863 / <19.00 GiB
Free PE / Size 0 / 0
VG UUID oMDZ59-DQqg-ok7A-YJMV-vXBO-KU5L-Slk8pe
3.创建逻辑卷
[root@superwu10 ~]# lvcreate -n juan1 -l 30 hehe //-n 表示创建逻辑卷的名称，-l 表示逻辑卷的大小为30个PE。在hehe卷组上创建逻辑卷juan1,大小为30*4M. Logical volume "juan1" created. [root@superwu10 ~]# lvdisplay //查看逻辑卷信息 --- Logical volume --- LV Path /dev/hehe/juan1 //逻辑卷存在与卷组下 LV Name juan1 VG Name hehe LV UUID 9e0cRI-T9RO-PbBC-zQWd-Bfi2-rVUx-MPnrIW LV Write Access read/write LV Creation host, time superwu10.10, 2022-02-10 06:57:31 +0800 LV Status available # open 0 LV Size 120.00 MiB //30个PE 30*4M=120M. Current LE 30 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:2 --- Logical volume --- LV Path /dev/rhel/swap LV Name swap VG Name rhel LV UUID 620uVZ-3mFM-BfSd-G2D7-H6QI-JmZi-nfEeWg LV Write Access read/write LV Creation host, time superwu10.10, 2022-01-10 03:42:19 +0800 LV Status available # open 2 LV Size 2.00 GiB Current LE 512 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:1 --- Logical volume --- LV Path /dev/rhel/root LV Name root VG Name rhel LV UUID T0O43Y-pZqz-pKJH-BTI7-lChV-0RMU-iXS0UC LV Write Access read/write LV Creation host, time superwu10.10, 2022-01-10 03:42:19 +0800 LV Status available # open 1 LV Size <17.00 GiB Current LE 4351 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:0 [root@superwu10 ~]# lvcreate -n ceshi2 -L 150M hehe //-L参数可直接指定创建卷的大小 Rounding up size to full physical extent 152.00 MiB //卷大小如果不是4M的倍数，会自动微调为4的倍数。 Logical volume "ceshi2" created. [root@superwu10 ~]# lvdisplay --- Logical volume --- LV Path /dev/hehe/juan1 LV Name juan1 VG Name hehe LV UUID 9e0cRI-T9RO-PbBC-zQWd-Bfi2-rVUx-MPnrIW LV Write Access read/write LV Creation host, time superwu10.10, 2022-02-10 06:57:31 +0800 LV Status available # open 0 LV Size 120.00 MiB Current LE 30 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:2 --- Logical volume --- LV Path /dev/hehe/ceshi2 LV Name ceshi2 VG Name hehe LV UUID k5jQcY-vC37-24XV-CtT5-28H4-zH6Z-ResmXr LV Write Access read/write LV Creation host, time superwu10.10, 2022-02-10 06:58:56 +0800 LV Status available # open 0 LV Size 152.00 MiB Current LE 38 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:3 --- Logical volume --- LV Path /dev/rhel/swap LV Name swap VG Name rhel LV UUID 620uVZ-3mFM-BfSd-G2D7-H6QI-JmZi-nfEeWg LV Write Access read/write LV Creation host, time superwu10.10, 2022-01-10 03:42:19 +0800 LV Status available # open 2 LV Size 2.00 GiB Current LE 512 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:1 --- Logical volume --- LV Path /dev/rhel/root LV Name root VG Name rhel LV UUID T0O43Y-pZqz-pKJH-BTI7-lChV-0RMU-iXS0UC LV Write Access read/write LV Creation host, time superwu10.10, 2022-01-10 03:42:19 +0800 LV Status available # open 1 LV Size <17.00 GiB Current LE 4351 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:0
4.格式化逻辑卷
如果使用了逻辑卷管理器，则不建议用XFS文件系统，因为XFS文件系统自身就可以使用xfs_growfs命令进行磁盘扩容。这虽然不比LVM灵活，但起码也够用。
[root@superwu10 ~]# mkfs.ext4 /dev/hehe/juan1
mke2fs 1.44.3 (10-July-2018)
Creating filesystem with 122880 1k blocks and 30720 inodes
Filesystem UUID: 76a02fab-9c6c-4416-a82d-82f0d8e681a5
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729
Allocating group tables: done
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
5.挂载使用
[root@superwu10 ~]# mkdir /opt/juan [root@superwu10 ~]# mount /dev/hehe/juan1 /opt/juan/ [root@superwu10 ~]# df -h Filesystem Size Used Avail Use% Mounted on devtmpfs 969M 0 969M 0% /dev tmpfs 984M 0 984M 0% /dev/shm tmpfs 984M 9.6M 974M 1% /run tmpfs 984M 0 984M 0% /sys/fs/cgroup /dev/mapper/rhel-root 17G 4.2G 13G 25% / /dev/sr0 6.7G 6.7G 0 100% /media/cdrom /dev/sda1 1014M 153M 862M 15% /boot tmpfs 197M 16K 197M 1% /run/user/42 tmpfs 197M 3.5M 194M 2% /run/user/0 /dev/mapper/hehe-juan1 113M 1.6M 103M 2% /opt/juan [root@superwu10 ~]# echo "/dev/hehe/juan1 /opt/juan ext4 defaults 0 0" >> /etc/fstab
[root@superwu10 ~]# cd /opt/juan/ [root@superwu10 juan]# ll total 12 drwx------. 2 root root 12288 Feb 10 07:13 lost+found [root@superwu10 juan]# touch test.txt [root@superwu10 juan]# ll total 13 drwx------. 2 root root 12288 Feb 10 07:13 lost+found -rw-r--r--. 1 root root 0 Feb 10 07:19 test.txt
扩容逻辑卷
用户在使用存储设备时感知不到设备底层的架构和布局，更不用关心底层是由多少块硬盘组成的，只要卷组中有足够的资源，就可以一直为逻辑卷扩容。扩容前请一定要记得卸载设备和挂载点的关联。
1.卸载设备
[root@superwu ~]# umount /opt/data1
[root@superwu ~]# df -h
Filesystem Size Used Avail Use% Mounted on
devtmpfs 969M 0 969M 0% /dev
tmpfs 984M 0 984M 0% /dev/shm
tmpfs 984M 9.6M 974M 1% /run
tmpfs 984M 0 984M 0% /sys/fs/cgroup
/dev/mapper/rhel-root 17G 3.9G 14G 23% /
/dev/sr0 6.7G 6.7G 0 100% /media/cdrom
/dev/sda1 1014M 152M 863M 15% /boot
tmpfs 197M 16K 197M 1% /run/user/42
tmpfs 197M 3.5M 194M 2% /run/user/0
2.扩容逻辑卷
[root@superwu ~]# lvextend -L 250M /dev/hehe/juan1 //扩容逻辑卷至250M
Rounding size to boundary between physical extents: 252.00 MiB.
Size of logical volume hehe/juan1 changed from 120.00 MiB (30 extents) to 252.00 MiB (63 extents).
Logical volume hehe/juan1 successfully resized.
3.检查硬盘的完整性，确认目录结构、内容和文件内容没有丢失。没有报错，为正常情况。
[root@superwu ~]# e2fsck -f /dev/hehe/juan1
e2fsck 1.44.3 (10-July-2018)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/hehe/juan1: 12/30720 files (0.0% non-contiguous), 9530/122880 blocks
4.重置设备在系统中的容量。刚刚是对LV（逻辑卷）设备进行了扩容操作，但系统内核还没有同步到这部分新修改的信息，需要手动进行同步。
[root@superwu ~]# resize2fs /dev/hehe/juan1
resize2fs 1.44.3 (10-July-2018)
Resizing the filesystem on /dev/hehe/juan1 to 258048 (1k) blocks.
The filesystem on /dev/hehe/juan1 is now 258048 (1k) blocks long.
5.重新挂载设备
[root@superwu ~]# mount -a [root@superwu ~]# df -h Filesystem Size Used Avail Use% Mounted on devtmpfs 969M 0 969M 0% /dev tmpfs 984M 0 984M 0% /dev/shm tmpfs 984M 9.6M 974M 1% /run tmpfs 984M 0 984M 0% /sys/fs/cgroup /dev/mapper/rhel-root 17G 3.9G 14G 23% / /dev/sr0 6.7G 6.7G 0 100% /media/cdrom /dev/sda1 1014M 152M 863M 15% /boot tmpfs 197M 16K 197M 1% /run/user/42 tmpfs 197M 3.5M 194M 2% /run/user/0 /dev/mapper/hehe-juan1 240M 2.1M 222M 1% /opt/data1 [root@superwu ~]# lvdisplay --- Logical volume --- LV Path /dev/hehe/juan1 LV Name juan1 VG Name hehe LV UUID KvHDJu-CMPo-uMwK-56B0-dMWB-hONK-OvhUxH LV Write Access read/write LV Creation host, time superwu.10, 2022-02-10 16:42:58 +0800 LV Status available # open 1 LV Size 252.00 MiB //已经扩容至252M Current LE 63 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:2 --- Logical volume --- LV Path /dev/rhel/swap LV Name swap VG Name rhel LV UUID 5r17mN-Xzxt-YbDv-fg9m-9JT1-AtsD-K6h5yZ LV Write Access read/write LV Creation host, time superwu.10, 2022-01-11 16:26:54 +0800 LV Status available # open 2 LV Size 2.00 GiB Current LE 512 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:1 --- Logical volume --- LV Path /dev/rhel/root LV Name root VG Name rhel LV UUID Ng4387-Ok4t-nWlF-zhtl-ahge-12Le-sk4mri LV Write Access read/write LV Creation host, time superwu.10, 2022-01-11 16:26:54 +0800 LV Status available # open 1 LV Size <17.00 GiB Current LE 4351 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:0
缩小逻辑卷
缩容操作，有数据丢失风险，建议先备份数据再进行缩容。
在对LVM逻辑卷缩容前，首先要检查文件系统的完整性。
1.卸载LVM逻辑卷设备
[root@superwu ~]# umount /opt/data1
[root@superwu ~]# df -h
Filesystem Size Used Avail Use% Mounted on
devtmpfs 969M 0 969M 0% /dev
tmpfs 984M 0 984M 0% /dev/shm
tmpfs 984M 9.6M 974M 1% /run
tmpfs 984M 0 984M 0% /sys/fs/cgroup
/dev/mapper/rhel-root 17G 3.9G 14G 23% /
/dev/sr0 6.7G 6.7G 0 100% /media/cdrom
/dev/sda1 1014M 152M 863M 15% /boot
tmpfs 197M 16K 197M 1% /run/user/42
tmpfs 197M 3.5M 194M 2% /run/user/0
2.检查文件系统完整性
[root@superwu ~]# e2fsck -f /dev/hehe/juan1
e2fsck 1.44.3 (10-July-2018)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/hehe/juan1: 12/65536 files (0.0% non-contiguous), 14432/258048 blocks
3.通知内核缩减逻辑卷后的大小
[root@superwu ~]# resize2fs /dev/hehe/juan1 150M //将LVM逻辑卷缩减到150M
resize2fs 1.44.3 (10-July-2018)
Resizing the filesystem on /dev/hehe/juan1 to 153600 (1k) blocks.
The filesystem on /dev/hehe/juan1 is now 153600 (1k) blocks long.
4.缩减LVM逻辑卷容量
[root@superwu ~]# lvreduce -L 150M /dev/hehe/juan1 //注意：缩减逻辑卷的大小应与通知内核时的大小相同。 Rounding size to boundary between physical extents: 152.00 MiB. WARNING: Reducing active logical volume to 152.00 MiB. THIS MAY DESTROY YOUR DATA (filesystem etc.) Do you really want to reduce hehe/juan1? [y/n]: y //需要二次确认 Size of logical volume hehe/juan1 changed from 252.00 MiB (63 extents) to 152.00 MiB (38 extents). Logical volume hehe/juan1 successfully resized.
5.挂载并使用LVM逻辑卷
[root@superwu ~]# mount -a [root@superwu ~]# df -h Filesystem Size Used Avail Use% Mounted on devtmpfs 969M 0 969M 0% /dev tmpfs 984M 0 984M 0% /dev/shm tmpfs 984M 9.6M 974M 1% /run tmpfs 984M 0 984M 0% /sys/fs/cgroup /dev/mapper/rhel-root 17G 3.9G 14G 23% / /dev/sr0 6.7G 6.7G 0 100% /media/cdrom /dev/sda1 1014M 152M 863M 15% /boot tmpfs 197M 16K 197M 1% /run/user/42 tmpfs 197M 3.5M 194M 2% /run/user/0 /dev/mapper/hehe-juan1 142M 1.6M 130M 2% /opt/data1 [root@superwu ~]# lvdisplay --- Logical volume --- LV Path /dev/hehe/juan1 LV Name juan1 VG Name hehe LV UUID KvHDJu-CMPo-uMwK-56B0-dMWB-hONK-OvhUxH LV Write Access read/write LV Creation host, time superwu.10, 2022-02-10 16:42:58 +0800 LV Status available # open 1 LV Size 152.00 MiB //已经将逻辑卷缩小到150M Current LE 38 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:2
逻辑卷快照
LVM还具备有“快照卷”功能，该功能类似于虚拟机软件的还原时间点功能。例如，对某一个逻辑卷设备做一次快照，如果日后发现数据被改错了，就可以利用之前做好的快照卷进行覆盖还原。LVM的快照卷功能有两个特点：
快照卷的容量必须等同于逻辑卷的容量；
快照卷仅一次有效，一旦执行还原操作后则会被立即自动删除。
1.查看要备份的LVM逻辑卷的大小、卷组的大小是否够用。
[root@superwu ~]# lvdisplay --- Logical volume --- LV Path /dev/hehe/juan1 LV Name juan1 VG Name hehe LV UUID KvHDJu-CMPo-uMwK-56B0-dMWB-hONK-OvhUxH LV Write Access read/write LV Creation host, time superwu.10, 2022-02-10 16:42:58 +0800 LV Status available # open 1 LV Size 152.00 MiB Current LE 38 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:2 [root@superwu data1]# vgdisplay --- Volume group --- VG Name hehe System ID Format lvm2 Metadata Areas 2 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 1 Max PV 0 Cur PV 2 Act PV 2 VG Size 39.99 GiB PE Size 4.00 MiB Total PE 10238 Alloc PE / Size 38 / 152.00 MiB Free PE / Size 10200 / 39.84 GiB VG UUID jW63WM-Xw4t-dMIc-if0Y-6oPN-Rdbh-qloflg
2.创建快照
[root@superwu data1]# lvcreate -s -n hehekuaizhao -L 150M /dev/hehe/juan1 //-s参数表示创建快照（对juan1逻辑卷创建快照），快照大小等于LVM逻辑卷。 Rounding up size to full physical extent 152.00 MiB Logical volume "hehekuaizhao" created. [root@superwu data1]# lvdisplay --- Logical volume --- LV Path /dev/hehe/juan1 LV Name juan1 VG Name hehe LV UUID KvHDJu-CMPo-uMwK-56B0-dMWB-hONK-OvhUxH LV Write Access read/write LV Creation host, time superwu.10, 2022-02-10 16:42:58 +0800 LV snapshot status source of hehekuaizhao [active] //此处可看到此逻辑卷已经被创建了快照hehekuaizhao LV Status available # open 1 LV Size 152.00 MiB Current LE 38 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:2 --- Logical volume --- LV Path /dev/hehe/hehekuaizhao LV Name hehekuaizhao VG Name hehe LV UUID qfyr6Y-lg1h-9Hs1-G5VQ-9svJ-kDie-NS1v67 LV Write Access read/write LV Creation host, time superwu.10, 2022-02-10 17:33:12 +0800 LV snapshot status active destination for juan1 //此处可看到本快照是基于juan1创建的 LV Status available # open 0 LV Size 152.00 MiB Current LE 38 COW-table size 152.00 MiB COW-table LE 38 Allocated to snapshot 0.01% Snapshot chunk size 4.00 KiB Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:5
3.还原快照
lvconvert命令用于管理逻辑卷的快照，语法格式为“lvconvert [参数]快照卷名称”。
[root@superwu ~]#cd /opt/data1 //修改LVM逻辑卷中的内容 [root@superwu data1]# touch ceshi1 [root@superwu data1]# touch ceshi2 [root@superwu data1]# touch ceshi3 [root@superwu data1]# ll total 17 -rw-r--r--. 1 root root 0 Feb 10 17:36 ceshi1 -rw-r--r--. 1 root root 0 Feb 10 17:36 ceshi2 -rw-r--r--. 1 root root 0 Feb 10 17:36 ceshi3 -rw-r--r--. 1 root root 10 Feb 10 17:30 hehe drwx------. 2 root root 12288 Feb 10 16:44 lost+found [root@superwu data1]cd ~
还原快照需要先卸载LVM逻辑卷设备 [root@superwu ~]# umount /opt/data1 //卸载逻辑卷 [root@superwu ~]# df -h Filesystem Size Used Avail Use% Mounted on devtmpfs 969M 0 969M 0% /dev tmpfs 984M 0 984M 0% /dev/shm tmpfs 984M 9.6M 974M 1% /run tmpfs 984M 0 984M 0% /sys/fs/cgroup /dev/mapper/rhel-root 17G 3.9G 14G 23% / /dev/sr0 6.7G 6.7G 0 100% /media/cdrom /dev/sda1 1014M 152M 863M 15% /boot tmpfs 197M 16K 197M 1% /run/user/42 tmpfs 197M 3.5M 194M 2% /run/user/0 [root@superwu ~]# lvconvert --merge /dev/hehe/hehekuaizhao //将逻辑卷恢复到hehekuaizhao快照 Merging of volume hehe/hehekuaizhao started. hehe/juan1: Merged: 100.00% [root@superwu ~]# mount -a //挂载逻辑卷 [root@superwu ~]# df -h Filesystem Size Used Avail Use% Mounted on devtmpfs 969M 0 969M 0% /dev tmpfs 984M 0 984M 0% /dev/shm tmpfs 984M 9.6M 974M 1% /run tmpfs 984M 0 984M 0% /sys/fs/cgroup /dev/mapper/rhel-root 17G 3.9G 14G 23% / /dev/sr0 6.7G 6.7G 0 100% /media/cdrom /dev/sda1 1014M 152M 863M 15% /boot tmpfs 197M 16K 197M 1% /run/user/42 tmpfs 197M 3.5M 194M 2% /run/user/0 /dev/mapper/hehe-juan1 142M 1.6M 130M 2% /opt/data1 [root@superwu ~]# cd /opt/data1/ [root@superwu data1]# ll total 14 -rw-r--r--. 1 root root 10 Feb 10 17:30 hehe //快照已恢复 drwx------. 2 root root 12288 Feb 10 16:44 lost+found
[root@superwu data1]# lvdisplay //快照被恢复后会自动删除，即快照只一次有效
--- Logical volume ---
LV Path /dev/hehe/juan1
LV Name juan1
VG Name hehe
LV UUID KvHDJu-CMPo-uMwK-56B0-dMWB-hONK-OvhUxH
LV Write Access read/write
LV Creation host, time superwu.10, 2022-02-10 16:42:58 +0800
LV Status available
# open 1
LV Size 152.00 MiB
Current LE 38
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 8192
Block device 253:2
删除逻辑卷
删除逻辑卷需要执行严格的操作步骤，不能颠倒顺序。删除逻辑卷 --> 卷组 --> 物理卷设备。
1.卸载逻辑卷，删除开机自动挂载
[root@superwu ~]# umount /opt/data1
[root@superwu ~]# vim /etc/fstab
[root@superwu ~]# cat /etc/fstab
#
# /etc/fstab
# Created by anaconda on Tue Jan 11 03:26:57 2022
#
# Accessible filesystems, by reference, are maintained under '/dev/disk/'.
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info.
#
# After editing this file, run 'systemctl daemon-reload' to update systemd
# units generated from this file.
#
/dev/mapper/rhel-root / xfs defaults 0 0
UUID=d7f53471-c95f-44f2-aafe-f86bd5ecebd7 /boot xfs defaults 0 0
/dev/mapper/rhel-swap swap swap defaults 0 0
/dev/cdrom /media/cdrom iso9660 defaults 0 0
2.删除逻辑卷
[root@superwu ~]# lvremove /dev/hehe/juan1 Do you really want to remove active logical volume hehe/juan1? [y/n]: y //需要二次确认 Logical volume "juan1" successfully removed
3.删除卷组
[root@superwu ~]# vgremove hehe //直接写卷组名称即可，不需要写完整路径 Volume group "hehe" successfully removed
4.删除物理卷
[root@superwu ~]# pvremove /dev/sdb /dev/sdc
Labels on physical volume "/dev/sdb" successfully wiped.
Labels on physical volume "/dev/sdc" successfully wiped.
删除后，可执行lvdisplay、vgdisplay、pvdisplay命令查看删除是否成功。
