iptables修改
https://fedoraproject.org/wiki/How_to_edit_iptables_rules?rd=User_talk:Rforlot
Listing Rules
Current running iptables Rules can be viewed with the command
iptables -L
.
The list of Rules with the -L command option shows ports by their service name rather than port number. To see the port number instead, include the -nargument.
iptables -L -n
Rules listed with the -L command option do not include matching counters. To include matching counters, include -v argument.
iptables -L -v
Example of iptables Rules allowing any connections already established or related, icmp requests, all local traffic, and ssh communication:
[root@server ~]# iptables -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination
Note that Rules are applied in order of appearance, and the inspection ends immediately when there is a match. Therefore, for example, if a Rule rejecting ssh connections is created, and afterward another Rule is specified allowing ssh, the Rule to reject is applied and the later Rule to accept the ssh connection is not.
Appending Rules
The following adds a Rule at the end of the specified chain of iptables:
[root@server ~]# iptables -A INPUT -p tcp --dport 80 -j ACCEPT
[root@server ~]# iptables -L
Chain INPUT (policy DROP)
target prot opt source destination
ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED
ACCEPT icmp -- anywhere anywhere
ACCEPT all -- anywhere anywhere
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh
ACCEPT tcp -- anywhere anywhere tcp dpt:http
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Notice the last line in chain INPUT. There are now five Rules in that chain.
Deleting Rules
To delete a Rule, you must know its position in the chain. The following example deletes an existing Rule created earlier that is currently in the fifth position:
[root@server ~]# iptables -D INPUT 5 [root@server ~]# iptables -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination
Inserting Rules
Create a Rule at the top (first) position:
[root@server ~]# iptables -I INPUT 1 -p tcp --dport 80 -j ACCEPT [root@server ~]# iptables -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination
The number given after the chain name indicates the position before an existing Rule. So, for example, if you want to insert a Rule before the third rule you specify the number 3. Afterward, the existing Rule will then be in the fourth position in the chain.
Replacing Rules
Rules may be specified to replace existing Rules in the chain.
In the example shown previously, the first Rule given allows connections to the http port (port 80) from anywhere. The following replaces this Rule, restricting connections to the standard http port (port 80) only from the network address range 192.168.0.0/24:
[root@server ~]# iptables -R INPUT 1 -p tcp -s 192.168.0.0/24 --dport 80 -j ACCEPT [root@server ~]# iptables -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT tcp -- 192.168.0.0/24 anywhere tcp dpt:http ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination
Flushing Rules
To flush or clear iptables Rules, use the --flush, -F option :
iptables -F <chain>
Specifying a <chain> is optional; without a chain specification, all chains are flushed.
Example to flush Rules in the OUTPUT chain :
[root@server ~]# iptables -F OUTPUT
.png){kind=small}
Be aware of the default chain policy. For example, if the INPUT policy is DROP or REJECT and the Rules are flushed, all incoming traffic will be dropped or rejected and network communication broken.
Making changes persistent
The iptables Rules changes using CLI commands will be lost upon system reboot. However, iptables comes with two useful utilities: iptables-save and iptables-restore.
- iptables-save prints a dump of current iptables rules to stdout. These may be redirected to a file:
[root@server ~]# iptables-save > iptables.dump [root@server ~]# cat iptables.dump # Generated by iptables-save v1.4.12 on Wed Dec 7 20:10:49 2011 *filter :INPUT DROP [45:2307] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [1571:4260654] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT COMMIT # Completed on Wed Dec 7 20:10:49 2011
- iptables-restore : restore a dump of rules made by iptables-save.
[root@server ~]# iptables-restore < iptables.dump [root@server ~]# iptables -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination
Upon stopping the service, the current iptables Rules are saved in a file, and upon starting the service, this file is restored. The affected files are:
-
/etc/sysconfig/iptables
for IPv4 -
/etc/sysconfig/ip6tables
for IPv6
If preferred, these files may be editted directly, and iptables service restarted to commit the changes. The format is similar to that of the iptables CLI commands:
# Generated by iptables-save v1.4.12 on Wed Dec 7 20:22:39 2011 *filter <--------------------------------------------------------- Specify the table of the next rules :INPUT DROP [157:36334] <----------------------------------------- This is the three chain belong to filter table, then the policy of the chain :FORWARD ACCEPT [0:0] <------------------------------------------- and between brackets [<packet-counter>:<byte-counter>] numbers is for :OUTPUT ACCEPT [48876:76493439] <--------------------------------- debug/informations purpose only. Leave them at their current value. -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT <--------- A rule. -A INPUT -p icmp -j ACCEPT <-------------------------------------- You just have to take all arguments -A INPUT -i lo -j ACCEPT <---------------------------------------- of an iptables command. -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT COMMIT <---------------------------------------------------------- Needed at each end of table definition. Commit rules in that table. # Completed on Wed Dec 7 20:22:39 2011
If needed, to reset packet and byte counters, use -Z, --zero :
iptables -Z <chain> <rule_number>
It is possible to reset only reset a single rule counter. It can be useful, if you want to know how many packets were captured for a specific rule.
