maven配置nexus
setting配置：
1 <?xml version="1.0" encoding="UTF-8"?> 2 3 <!-- 4 Licensed to the Apache Software Foundation (ASF) under one 5 or more contributor license agreements. See the NOTICE file 6 distributed with this work for additional information 7 regarding copyright ownership. The ASF licenses this file 8 to you under the Apache License, Version 2.0 (the 9 "License"); you may not use this file except in compliance 10 with the License. You may obtain a copy of the License at 11 12 http://www.apache.org/licenses/LICENSE-2.0 13 14 Unless required by applicable law or agreed to in writing, 15 software distributed under the License is distributed on an 16 "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY 17 KIND, either express or implied. See the License for the 18 specific language governing permissions and limitations 19 under the License. 20 --> 21 22 <!-- 23 | This is the configuration file for Maven. It can be specified at two levels: 24 | 25 | 1. User Level. This settings.xml file provides configuration for a single user, 26 | and is normally provided in ${user.home}/.m2/settings.xml. 27 | 28 | NOTE: This location can be overridden with the CLI option: 29 | 30 | -s /path/to/user/settings.xml 31 | 32 | 2. Global Level. This settings.xml file provides configuration for all Maven 33 | users on a machine (assuming they're all using the same Maven 34 | installation). It's normally provided in 35 | ${maven.home}/conf/settings.xml. 36 | 37 | NOTE: This location can be overridden with the CLI option: 38 | 39 | -gs /path/to/global/settings.xml 40 | 41 | The sections in this sample file are intended to give you a running start at 42 | getting the most out of your Maven installation. Where appropriate, the default 43 | values (values used when the setting is not specified) are provided. 44 | 45 |--> 46 <settings xmlns="http://maven.apache.org/SETTINGS/1.0.0" 47 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 48 xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd"> 49 <!-- localRepository 50 | The path to the local repository maven will use to store artifacts. 51 | 52 | Default: ${user.home}/.m2/repository 53 --> 54 <localRepository>E:/mvnRepository</localRepository> 55 56 57 <!-- interactiveMode 58 | This will determine whether maven prompts you when it needs input. If set to false, 59 | maven will use a sensible default value, perhaps based on some other setting, for 60 | the parameter in question. 61 | 62 | Default: true 63 <interactiveMode>true</interactiveMode> 64 --> 65 66 <!-- offline 67 | Determines whether maven should attempt to connect to the network when executing a build. 68 | This will have an effect on artifact downloads, artifact deployment, and others. 69 | 70 | Default: false 71 <offline>false</offline> 72 --> 73 74 <!-- pluginGroups 75 | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e. 76 | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers 77 | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list. 78 |--> 79 <pluginGroups> 80 <!-- pluginGroup 81 | Specifies a further group identifier to use for plugin lookup. 82 <pluginGroup>com.your.plugins</pluginGroup> 83 --> 84 </pluginGroups> 85 86 <!-- proxies 87 | This is a list of proxies which can be used on this machine to connect to the network. 88 | Unless otherwise specified (by system property or command-line switch), the first proxy 89 | specification in this list marked as active will be used. 90 |--> 91 <proxies> 92 <!-- proxy 93 | Specification for one proxy, to be used in connecting to the network. 94 | 95 <proxy> 96 <id>optional</id> 97 <active>true</active> 98 <protocol>http</protocol> 99 <username>proxyuser</username> 100 <password>proxypass</password> 101 <host>proxy.host.net</host> 102 <port>80</port> 103 <nonProxyHosts>local.net|some.host.com</nonProxyHosts> 104 </proxy> 105 --> 106 </proxies> 107 108 <!-- servers 109 | This is a list of authentication profiles, keyed by the server-id used within the system. 110 | Authentication profiles can be used whenever maven must make a connection to a remote server. 111 |--> 112 <servers> 113 <!-- server 114 | Specifies the authentication information to use when connecting to a particular server, identified by 115 | a unique name within the system (referred to by the 'id' attribute below). 116 | 117 | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are 118 | used together. 119 | 120 <server> 121 <id>deploymentRepo</id> 122 <username>repouser</username> 123 <password>repopwd</password> 124 </server> 125 --> 126 127 <!-- Another sample, using keys to authenticate. 128 <server> 129 <id>siteServer</id> 130 <privateKey>/path/to/private/key</privateKey> 131 <passphrase>optional; leave empty if not used.</passphrase> 132 </server> 133 --> 134 <server> 135 <id>Releases</id> 136 <username>admin</username> 137 <password>admin123</password> 138 </server> 139 <server> 140 <id>Snapshots</id> 141 <username>admin</username> 142 <password>admin123</password> 143 </server> 144 </servers> 145 146 <!-- mirrors 147 | This is a list of mirrors to be used in downloading artifacts from remote repositories. 148 | 149 | It works like this: a POM may declare a repository to use in resolving certain artifacts. 150 | However, this repository may have problems with heavy traffic at times, so people have mirrored 151 | it to several places. 152 | 153 | That repository definition will have a unique id, so we can create a mirror reference for that 154 | repository, to be used as an alternate download site. The mirror site will be the preferred 155 | server for that repository. 156 |--> 157 <mirrors> 158 <!-- mirror 159 | Specifies a repository mirror site to use instead of a given repository. The repository that 160 | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used 161 | for inheritance and direct lookup purposes, and must be unique across the set of mirrors. 162 | 163 <mirror> 164 <id>mirrorId</id> 165 <mirrorOf>repositoryId</mirrorOf> 166 <name>Human Readable Name for this Mirror.</name> 167 <url>http://my.repository.com/repo/path</url> 168 </mirror> 169 --> 170 <mirror> 171 <id>nexus</id> 172 <mirrorOf>*</mirrorOf><!--<mirrorOf>central</mirrorOf>里是要替代的仓库的id。如果填*，就会替代所有仓库。--> 173 <url>http://10.16.33.11:8081/nexus/content/groups/public</url> 174 </mirror> 175 </mirrors> 176 177 <!-- profiles 178 | This is a list of profiles which can be activated in a variety of ways, and which can modify 179 | the build process. Profiles provided in the settings.xml are intended to provide local machine- 180 | specific paths and repository locations which allow the build to work in the local environment. 181 | 182 | For example, if you have an integration testing plugin - like cactus - that needs to know where 183 | your Tomcat instance is installed, you can provide a variable here such that the variable is 184 | dereferenced during the build process to configure the cactus plugin. 185 | 186 | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles 187 | section of this document (settings.xml) - will be discussed later. Another way essentially 188 | relies on the detection of a system property, either matching a particular value for the property, 189 | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a 190 | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'. 191 | Finally, the list of active profiles can be specified directly from the command line. 192 | 193 | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact 194 | repositories, plugin repositories, and free-form properties to be used as configuration 195 | variables for plugins in the POM. 196 | 197 |--> 198 <profiles> 199 <!-- profile 200 | Specifies a set of introductions to the build process, to be activated using one or more of the 201 | mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/> 202 | or the command line, profiles have to have an ID that is unique. 203 | 204 | An encouraged best practice for profile identification is to use a consistent naming convention 205 | for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc. 206 | This will make it more intuitive to understand what the set of introduced profiles is attempting 207 | to accomplish, particularly when you only have a list of profile id's for debug. 208 | 209 | This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo. 210 <profile> 211 <id>jdk-1.4</id> 212 213 <activation> 214 <jdk>1.4</jdk> 215 </activation> 216 217 <repositories> 218 <repository> 219 <id>jdk14</id> 220 <name>Repository for JDK 1.4 builds</name> 221 <url>http://www.myhost.com/maven/jdk14</url> 222 <layout>default</layout> 223 <snapshotPolicy>always</snapshotPolicy> 224 </repository> 225 </repositories> 226 </profile> 227 --> 228 229 <!-- 230 | Here is another profile, activated by the system property 'target-env' with a value of 'dev', 231 | which provides a specific path to the Tomcat instance. To use this, your plugin configuration 232 | might hypothetically look like: 233 | 234 | ... 235 | <plugin> 236 | <groupId>org.myco.myplugins</groupId> 237 | <artifactId>myplugin</artifactId> 238 | 239 | <configuration> 240 | <tomcatLocation>${tomcatPath}</tomcatLocation> 241 | </configuration> 242 | </plugin> 243 | ... 244 | 245 | NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to 246 | anything, you could just leave off the <value/> inside the activation-property. 247 | 248 <profile> 249 <id>env-dev</id> 250 251 <activation> 252 <property> 253 <name>target-env</name> 254 <value>dev</value> 255 </property> 256 </activation> 257 258 <properties> 259 <tomcatPath>/path/to/tomcat/instance</tomcatPath> 260 </properties> 261 </profile> 262 --> 263 </profiles> 264 265 <!-- activeProfiles 266 | List of profiles that are active for all builds. 267 | 268 <activeProfiles> 269 <activeProfile>alwaysActiveProfile</activeProfile> 270 <activeProfile>anotherAlwaysActiveProfile</activeProfile> 271 </activeProfiles> 272 --> 273 </settings>
主要配置了134和170行
第二步，配置项目里的pom.xml
1 <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 2 xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd"> 3 <modelVersion>4.0.0</modelVersion> 4 <artifactId>mango</artifactId> 5 <!-- When changing version ensure you change Common.java as well. --> 6 <name>Mango Core</name> 7 <properties> 8 <!-- previous jetty version: 7.4.5.v20110725 9.2.0.v20140526 --> 9 <jettyVersion>9.2.2.v20140723</jettyVersion> 10 <!-- previous spring version: 3.1.1.RELEASE,3.1.2.RELEASE, 4.0.5.RELEASE 11 for websockets support --> 12 <springVersion>4.0.5.RELEASE</springVersion> 13 </properties> 14 <!-- <repositories> 15 <repository> 16 <id>mango-core</id> 17 <name>Mango Dependencies</name> 18 <releases> 19 <enabled>true</enabled> 20 <checksumPolicy>ignore</checksumPolicy> 21 </releases> 22 <snapshots> 23 <enabled>false</enabled> 24 </snapshots> 25 <url>file://${project.basedir}/maven-local</url> 26 </repository> 27 </repositories> --> 28 <repositories> 29 <repository> 30 <id>nexus</id> 31 <name>Team Nexus Repository</name> 32 <url>http://10.16.33.11:8081/nexus/content/groups/public</url> 33 </repository> 34 </repositories> 35 <pluginRepositories> 36 <pluginRepository> 37 <id>nexus</id> 38 <name>Team Nexus Repository</name> 39 <url>http://10.16.33.11:8081/nexus/content/groups/public</url> 40 </pluginRepository> 41 </pluginRepositories>
主要注释了14-27行，添加28-41行
