Ubuntu 编译安装搭配LNMP 环境
这里用Nginx1.2.0+mysql5.6.33+php5.6.2搭配安装环境
---------------------------------------------Nginx BEGIN---------------------------------------------
使用命令下载nginx安装包,用的是稳定版, 这里下载: <nginx1.6.2>
下载下来后就解压一下
解压后得到一个nginx-1.12.0的文件夹
进入文件夹, 运行命令:
回车运行脚本配置后, 这里要注意一下, 有可能会缺失zlib, ssh等库, 这个没关系, 查找 sudo apt-cache search xxx(库) 然后 sudo apt-get install xxx(对应库名) 就行了
这里可以参考: Nginx官网安装 的文章
成功后再运行:
sudo make sudo make install
要想加入自启动的话, 得在/etc/init.d/ 下建nginx 里面填上
#! /bin/sh ###BEGIN INIT INFO # Provides: nginx # Required-Start: $all # Required-Stop: $all # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: starts the nginx web server # Description: starts nginx using start-stop-daemon ### END INIT INFO PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin DAEMON=/usr/local/nginx/sbin/nginx NAME=nginx DESC=nginx test -x $DAEMON || exit 0 # Include nginx defaults if available if [ -f /etc/default/nginx ] ; then . /etc/default/nginx # . /usr/local/nginx/conf fi set -e . /lib/lsb/init-functions case "$1" in start) echo -n "Starting $DESC: " start-stop-daemon --start --quiet --pidfile /usr/local/nginx/logs/$NAME.pid \ --exec $DAEMON -- $DAEMON_OPTS || true echo "$NAME." ;; stop) echo -n "Stopping $DESC: " start-stop-daemon --stop --quiet --pidfile /usr/local/nginx/logs/$NAME.pid \ --exec $DAEMON || true echo "$NAME." ;; restart|force-reload) echo -n "Restarting $DESC: " start-stop-daemon --stop --quiet --pidfile \ /usr/local/nginx/logs/$NAME.pid --exec $DAEMON || true sleep 1 start-stop-daemon --start --quiet --pidfile \ /usr/local/nginx/logs/$NAME.pid --exec $DAEMON -- $DAEMON_OPTS || true echo "$NAME." ;; reload) echo -n "Reloading $DESC configuration: " start-stop-daemon --stop --signal HUP --quiet --pidfile /usr/local/nginx/logs/$NAME.pid \ --exec $DAEMON || true echo "$NAME." ;; status) status_of_proc -p /usr/local/nginx/logs/$NAME.pid "$DAEMON" nginx && exit 0 || exit $? ;; *) N=/etc/init.d/$NAME echo "Usage: $N {start|stop|restart|reload|force-reload|status}" >&2 exit 1 ;; esac exit 0
启动nginx 和看是否启动进程成功
浏览器运行 localhost 看到这个就说明启动成功了:
---------------------------------------------Nginx END---------------------------------------------
---------------------------------------------MySQL BEGIN---------------------------------------------
1 通过命令下载: http://dev.mysql.com/get/Downloads/MySQL-5.6/mysql-5.6.33-linux-glibc2.5-x86_64.tar.gz
2 解压后直接复制到软件夹, 免安装
//解压 tar -zxvf mysql-5.6.33-linux-glibc2.5-x86_64.tar.gz //复制解压后的mysql目录 sudo cp -r mysql-5.6.33-linux-glibc2.5-x86_64 /usr/local/mysql
3 给权限
cd /usr/local/mysql //新建一个数据库数据存放文件夹 sudo mkdir ./data/mysql //新建库 设user为mysql和数据文件路径 ./scripts/mysql_install_db --user=mysql --datadir=/usr/local/mysql/data/mysql //复制一个启动器 cp support-files/mysql.server /etc/init.d/mysqld //给权限 755 [rwx-rx-x] sudo chmod 755 /etc/init.d/mysqld
4 配置init.d/mysqld
sudo /etc/init.d/mysqld
5 启动测试
sudo service mysqld start
这里可能出现的错误:
可能原因
[一] /usr/local/mysql/data/mysql.pid 文件没有写的权限
解决:
sudo chmod -R 755 /usr/local/mysql/data
[二] 可能进程里已经存在有mysql进程了
解决:
ps -aux | grep mysql sudo kill pid
我这里就是这个原因, kill掉进程后重启
进入mysql看看;;;
成功了.....
---------------------------------------------MySQL END---------------------------------------------
---------------------------------------------php BEGIN---------------------------------------------
//下载 wget http://mirrors.sohu.com/php/php-5.6.2.tar.gz //解压 tar -zxvf php-5.6.2.tar.gz //进入php目录 cd php-5.6.2 //运行脚本 sudo ./configure --prefix=/usr/local/php --enable-fpm --enable-mbstring --with-mysql=/usr/local/mysql
e.g sudo ./configure --prefix=/usr/local/php --with-mcrypt=/usr/include --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --with-iconv --with-zlib --with-openssl --with-curl --enable-fpm --enable-mbstring --with-mysql=/usr/local/mysql
//编译php sudo make sudo make install
注: --enable-fpm 开启phpfastcgi功能
--with-mysql=/usr/local/mysql 启用php支持mysql功能 后面是mysql数据库的安装路径
执行sudo make
时间较长....这里好可怕,.,,.,.,.,.,漫长的等待后会看到....
执行sudo make install
查看php版本
//复制php安装文件提供的模板作为php.ini sudo cp php.ini-production /usr/local/lib/php.ini //配置php-fpm sudo cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf //让php-fpm以服务的形式启动 sudo cp ./sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm
跑一下看看...
ok了....
---------------------------------------------php END---------------------------------------------
参考自:
http://www.cnblogs.com/bookwed/p/5896619.html
http://ilanni.blog.51cto.com/526870/1569322/