Ubuntu 24.04 VMware里面设置静态ip上网

1.VMware里面设置网络为桥接模式

2.Ubuntu里面检查网卡名称

[~] ip addr                                                                    
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:62:df:8f brd ff:ff:ff:ff:ff:ff
    altname enp2s1
    inet 192.168.122.128/24 metric 100 brd 192.168.122.255 scope global dynamic ens33
       valid_lft 1691sec preferred_lft 1691sec
    inet6 fe80::20c:29ff:fe62:df8f/64 scope link 
       valid_lft forever preferred_lft forever

网关：192.168.122.255

3.编辑Ubuntu24的网络配置文件，路径：/etc/netplan/

[/] cd /etc/netplan/                                                           
[netplan] ls                                                                   
50-cloud-init.yaml
[netplan] vim 50-cloud-init.yaml                                               
[netplan] sudo su                                                              
[sudo] password for planz: 
zooz# vim /etc/netplan/50-cloud-init.yaml 

切换到root用户，编辑网络配置文件

[~] sudo su                                                                    
[sudo] password for planz: 
zooz# vim /etc/netplan/50-cloud-init.yaml 

4.编辑完成保存文件后，执行重启网络

zooz# sudo netplan apply

至此测试新的地址是否能连通即可...