ASP.NET Core - 选项系统之源码介绍
.NET Core 选项系统的主要实现在 Microsoft.Extensions.Options 和 Microsoft.Extensions.Options.ConfigurationExtensions 两个 Nuget 包。对于一个框架的源码进行解读，我们可以从我们常用的框架中的类或方法入手，这些类或方法就是我们解读的入口。
从上面对选项系统的介绍中，大家也可以看出，日常对选项系统的使用涉及到的主要有 Configure 方法，有 IOptions
Configure
首先看选项注册，也就是 Configure 方法，注册相关的方法都是扩展方法，上面也讲到 Configure 方法有多个扩展来源，其中最常用的是 OptionsConfigurationServiceCollectionExtensions 中的 Configure 方法，该方法用于从配置信息中读取配置并绑定为选项，如下，这里将相应的方法单独摘出来了。
点击查看代码 OptionsConfigurationServiceCollectionExtensions.Configure
public static class OptionsConfigurationServiceCollectionExtensions
{
/// <summary>
/// Registers a configuration instance which TOptions will bind against.
/// </summary>
/// <typeparam name="TOptions">The type of options being configured.</typeparam>
/// <param name="services">The <see cref="IServiceCollection"/> to add the services to.</param>
/// <param name="config">The configuration being bound.</param>
/// <returns>The <see cref="IServiceCollection"/> so that additional calls can be chained.</returns>
[RequiresUnreferencedCode(OptionsBuilderConfigurationExtensions.TrimmingRequiredUnreferencedCodeMessage)]
public static IServiceCollection Configure<[DynamicallyAccessedMembers(DynamicallyAccessedMemberTypes.All)] TOptions>(this IServiceCollection services, IConfiguration config) where TOptions : class
=> services.Configure<TOptions>(Options.Options.DefaultName, config);
/// <summary>
/// Registers a configuration instance which TOptions will bind against.
/// </summary>
/// <typeparam name="TOptions">The type of options being configured.</typeparam>
/// <param name="services">The <see cref="IServiceCollection"/> to add the services to.</param>
/// <param name="name">The name of the options instance.</param>
/// <param name="config">The configuration being bound.</param>
/// <returns>The <see cref="IServiceCollection"/> so that additional calls can be chained.</returns>
[RequiresUnreferencedCode(OptionsBuilderConfigurationExtensions.TrimmingRequiredUnreferencedCodeMessage)]
public static IServiceCollection Configure<[DynamicallyAccessedMembers(DynamicallyAccessedMemberTypes.All)] TOptions>(this IServiceCollection services, string name, IConfiguration config) where TOptions : class
=> services.Configure<TOptions>(name, config, _ => { });
/// <summary>
/// Registers a configuration instance which TOptions will bind against.
/// </summary>
/// <typeparam name="TOptions">The type of options being configured.</typeparam>
/// <param name="services">The <see cref="IServiceCollection"/> to add the services to.</param>
/// <param name="config">The configuration being bound.</param>
/// <param name="configureBinder">Used to configure the <see cref="BinderOptions"/>.</param>
/// <returns>The <see cref="IServiceCollection"/> so that additional calls can be chained.</returns>
[RequiresUnreferencedCode(OptionsBuilderConfigurationExtensions.TrimmingRequiredUnreferencedCodeMessage)]
public static IServiceCollection Configure<[DynamicallyAccessedMembers(DynamicallyAccessedMemberTypes.All)] TOptions>(this IServiceCollection services, IConfiguration config, Action<BinderOptions> configureBinder)
where TOptions : class
=> services.Configure<TOptions>(Options.Options.DefaultName, config, configureBinder);
/// <summary>
/// Registers a configuration instance which TOptions will bind against.
/// </summary>
/// <typeparam name="TOptions">The type of options being configured.</typeparam>
/// <param name="services">The <see cref="IServiceCollection"/> to add the services to.</param>
/// <param name="name">The name of the options instance.</param>
/// <param name="config">The configuration being bound.</param>
/// <param name="configureBinder">Used to configure the <see cref="BinderOptions"/>.</param>
/// <returns>The <see cref="IServiceCollection"/> so that additional calls can be chained.</returns>
[RequiresUnreferencedCode(OptionsBuilderConfigurationExtensions.TrimmingRequiredUnreferencedCodeMessage)]
public static IServiceCollection Configure<[DynamicallyAccessedMembers(DynamicallyAccessedMemberTypes.All)] TOptions>(this IServiceCollection services, string name, IConfiguration config, Action<BinderOptions> configureBinder)
where TOptions : class
{
if (services == null)
{
throw new ArgumentNullException(nameof(services));
}
if (config == null)
{
throw new ArgumentNullException(nameof(config));
}
services.AddOptions();
services.AddSingleton<IOptionsChangeTokenSource<TOptions>>(new ConfigurationChangeTokenSource<TOptions>(name, config));
return services.AddSingleton<IConfigureOptions<TOptions>>(new NamedConfigureFromConfigurationOptions<TOptions>(name, config, configureBinder));
}
}
其中 IOptionsChangeTokenSource
另外还有 OptionsServiceCollectionExtensions 中的 Configure 方法，用于直接通过委托对选项类进行配置。
点击查看代码 OptionsServiceCollectionExtensions.Configure
public static class OptionsServiceCollectionExtensions
{
public static IServiceCollection Configure<TOptions>(this IServiceCollection services, Action<TOptions> configureOptions) where TOptions : class
=> services.Configure(Options.Options.DefaultName, configureOptions);
public static IServiceCollection Configure<TOptions>(this IServiceCollection services, string name, Action<TOptions> configureOptions)
where TOptions : class
{
if (services == null)
{
throw new ArgumentNullException(nameof(services));
}
if (configureOptions == null)
{
throw new ArgumentNullException(nameof(configureOptions));
}
services.AddOptions();
services.AddSingleton<IConfigureOptions<TOptions>>(new ConfigureNamedOptions<TOptions>(name, configureOptions));
return services;
}
}
可以看出，其实选项系统中的选项都是命名模式的，默认名称为 Options.Options.DefaultName，实际就是 string.Empty。当我们调用 Configure 方法对选项进行配置的时候，实际上时调用了 AddOptions 方法，并且往容器中添加了一个单例的实现了 IConfigureOptions
IConfigureOptions、IConfigureNamedOptions、IPostConfigureOptions
其中 IConfigureOptions
点击查看代码 ConfigureOptions
public class ConfigureOptions<TOptions> : IConfigureOptions<TOptions> where TOptions : class
{
/// <summary>
/// Constructor.
/// </summary>
/// <param name="action">The action to register.</param>
public ConfigureOptions(Action<TOptions> action)
{
Action = action;
}
/// <summary>
/// The configuration action.
/// </summary>
public Action<TOptions> Action { get; }
/// <summary>
/// Invokes the registered configure <see cref="Action"/>.
/// </summary>
/// <param name="options">The options instance to configure.</param>
public virtual void Configure(TOptions options)
{
if (options == null)
{
throw new ArgumentNullException(nameof(options));
}
Action?.Invoke(options);
}
}
IConfigureNamedOptions
点击查看代码 ConfigureNamedOptions
```csharp
public class ConfigureNamedOptions/// Constructor. ///
/// The name of the options. /// The action to register. public ConfigureNamedOptions(string name, Action/// <summary>
/// The options name.
/// </summary>
public string Name { get; }
/// <summary>
/// The configuration action.
/// </summary>
public Action<TOptions> Action { get; }
/// <summary>
/// Invokes the registered configure <see cref="Action"/> if the <paramref name="name"/> matches.
/// </summary>
/// <param name="name">The name of the options instance being configured.</param>
/// <param name="options">The options instance to configure.</param>
public virtual void Configure(string name, TOptions options)
{
if (options == null)
{
throw new ArgumentNullException(nameof(options));
}
// Null name is used to configure all named options.
if (Name == null || name == Name)
{
Action?.Invoke(options);
}
}
/// <summary>
/// Invoked to configure a <typeparamref name="TOptions"/> instance with the <see cref="Options.DefaultName"/>.
/// </summary>
/// <param name="options">The options instance to configure.</param>
public void Configure(TOptions options) => Configure(Options.DefaultName, options);
}
</details>
而 NamedConfigureFromConfigurationOptions<TOptions> 类是 IConfigureNamedOptions<TOptions> 的另一个实现，继承了ConfigureNamedOptions<TOptions> 类，重写了一些行为，最终是通过之前讲到的 ConfigurationBuilder的 Bind 方法将配置绑定到选项类而已。
<details>
<summary>点击查看代码 NamedConfigureFromConfigurationOptions<TOptions></summary>
```csharp
public class NamedConfigureFromConfigurationOptions<[DynamicallyAccessedMembers(DynamicallyAccessedMemberTypes.All)] TOptions> : ConfigureNamedOptions<TOptions>
where TOptions : class
{
/// <summary>
/// Constructor that takes the <see cref="IConfiguration"/> instance to bind against.
/// </summary>
/// <param name="name">The name of the options instance.</param>
/// <param name="config">The <see cref="IConfiguration"/> instance.</param>
[RequiresUnreferencedCode(OptionsBuilderConfigurationExtensions.TrimmingRequiredUnreferencedCodeMessage)]
public NamedConfigureFromConfigurationOptions(string name, IConfiguration config)
: this(name, config, _ => { })
{ }
/// <summary>
/// Constructor that takes the <see cref="IConfiguration"/> instance to bind against.
/// </summary>
/// <param name="name">The name of the options instance.</param>
/// <param name="config">The <see cref="IConfiguration"/> instance.</param>
/// <param name="configureBinder">Used to configure the <see cref="BinderOptions"/>.</param>
[RequiresUnreferencedCode(OptionsBuilderConfigurationExtensions.TrimmingRequiredUnreferencedCodeMessage)]
public NamedConfigureFromConfigurationOptions(string name, IConfiguration config, Action<BinderOptions> configureBinder)
: base(name, options => BindFromOptions(options, config, configureBinder))
{
if (config == null)
{
throw new ArgumentNullException(nameof(config));
}
}
[UnconditionalSuppressMessage("ReflectionAnalysis", "IL2026:RequiresUnreferencedCode",
Justification = "The only call to this method is the constructor which is already annotated as RequiresUnreferencedCode.")]
private static void BindFromOptions(TOptions options, IConfiguration config, Action<BinderOptions> configureBinder) => config.Bind(options, configureBinder);
}
其他的 IPostConfigureOptions 接口也是一样套路，当我们通过相应的方法传入委托对选项类进行配置的时候，会向容器中注入一个单例服务，将配置行为保存起来。
接着往下看 AddOptions 方法，AddOptions 方法有两个重载：
点击查看代码 AddOptions
```csharp public static class OptionsServiceCollectionExtensions { public static IServiceCollection AddOptions(this IServiceCollection services) { if (services == null) { throw new ArgumentNullException(nameof(services)); } services.TryAdd(ServiceDescriptor.Singleton(typeof(IOptions<>), typeof(UnnamedOptionsManager<>)));
services.TryAdd(ServiceDescriptor.Scoped(typeof(IOptionsSnapshot<>), typeof(OptionsManager<>)));
services.TryAdd(ServiceDescriptor.Singleton(typeof(IOptionsMonitor<>), typeof(OptionsMonitor<>)));
services.TryAdd(ServiceDescriptor.Transient(typeof(IOptionsFactory<>), typeof(OptionsFactory<>)));
services.TryAdd(ServiceDescriptor.Singleton(typeof(IOptionsMonitorCache<>), typeof(OptionsCache<>)));
return services;
}
public static OptionsBuilder<TOptions> AddOptions<TOptions>(this IServiceCollection services, string name)
where TOptions : class
{
if (services == null)
{
throw new ArgumentNullException(nameof(services));
}
services.AddOptions();
return new OptionsBuilder<TOptions>(services, name);
}
}
</details>
这里可以看出两者的返回值不同，而且第二个方法也调用了第一个方法，第一个方法中主要就是向容器中添加我们常用的IOptions<TOptions>、IOptionsSnapshot<TOptions>、IOptionsMonitor<TOptions> 服务接口，这里也可以看到不同服务接口对于的生命周期。除此之外还有工厂服务IOptionsFactory<>和缓存服务IOptionsMonitorCache<>，这两个就是选项体系的关键。每个选项进行配置的时候都会同时注入这些服务，所以每一个选项我们都能使用三个不同接口去解析。
# OptionsBuilder
上面第二个 AddOptions 方法返回 OptionsBuilder<TOptions> 对象。之前讲过 OptionsBuilder<TOptions> 类中也有 Configure 方法，其实不止 Configure 方法，其他的 PostConfigure 方法等也有，它其实就是最终的选项系统配置类，我们所有的选项配置其实都可以通过调用第二个 AddOptions 方法，再通过 OptionsBuilder<TOptions> 对象中的方法来完成配置。其他各个扩展方法的配置方式不过是进行了使用简化而已。
<details>
<summary>点击查看代码 OptionsBuilder<TOptions></summary>
```csharp
public class OptionsBuilder<TOptions> where TOptions : class
{
private const string DefaultValidationFailureMessage = "A validation error has occurred.";
public string Name { get; }
public IServiceCollection Services { get; }
public OptionsBuilder(IServiceCollection services, string name)
{
Services = services;
Name = name ?? Options.DefaultName;
}
public virtual OptionsBuilder<TOptions> Configure(Action<TOptions> configureOptions)
{
Services.AddSingleton<IConfigureOptions<TOptions>>(new ConfigureNamedOptions<TOptions>(Name, configureOptions));
return this;
}
public virtual OptionsBuilder<TOptions> PostConfigure(Action<TOptions> configureOptions)
{
Services.AddSingleton<IPostConfigureOptions<TOptions>>(new PostConfigureOptions<TOptions>(Name, configureOptions));
return this;
}
public virtual OptionsBuilder<TOptions> Validate(Func<TOptions, bool> validation)
=> Validate(validation: validation, failureMessage: DefaultValidationFailureMessage);
public virtual OptionsBuilder<TOptions> Validate(Func<TOptions, bool> validation, string failureMessage)
{
Services.AddSingleton<IValidateOptions<TOptions>>(new ValidateOptions<TOptions>(Name, validation, failureMessage));
return this;
}
}
IValidateOptions
我们除了可以对选项进行配置绑定之外，还可以对选项进行验证。验证规则是通过上面的第二个 AddOptions 方法返回的 OptionsBuilder
验证规则配置有三种方式，最后其实都是通过 IValidateOptions
ValidateOptions
点击查看代码 ValidateOptions
public class ValidateOptions<TOptions> : IValidateOptions<TOptions> where TOptions : class
{
/// <summary>
/// Constructor.
/// </summary>
/// <param name="name">Options name.</param>
/// <param name="validation">Validation function.</param>
/// <param name="failureMessage">Validation failure message.</param>
public ValidateOptions(string name, Func<TOptions, bool> validation, string failureMessage)
{
Name = name;
Validation = validation;
FailureMessage = failureMessage;
}
/// <summary>
/// The options name.
/// </summary>
public string Name { get; }
/// <summary>
/// The validation function.
/// </summary>
public Func<TOptions, bool> Validation { get; }
/// <summary>
/// The error to return when validation fails.
/// </summary>
public string FailureMessage { get; }
/// <summary>
/// Validates a specific named options instance (or all when <paramref name="name"/> is null).
/// </summary>
/// <param name="name">The name of the options instance being validated.</param>
/// <param name="options">The options instance.</param>
/// <returns>The <see cref="ValidateOptionsResult"/> result.</returns>
public ValidateOptionsResult Validate(string name, TOptions options)
{
// null name is used to configure all named options
if (Name == null || name == Name)
{
if ((Validation?.Invoke(options)).Value)
{
return ValidateOptionsResult.Success;
}
return ValidateOptionsResult.Fail(FailureMessage);
}
// ignored if not validating this instance
return ValidateOptionsResult.Skip;
}
}
我们可以通过重载方法传入相应的验证失败提醒文本。
Options、UnnamedOptionsManager
接下来看选项使用相关的内容，其中 IOptions
点击查看代码 UnnamedOptionsManager
internal sealed class UnnamedOptionsManager<[DynamicallyAccessedMembers(Options.DynamicallyAccessedMembers)] TOptions> :
IOptions<TOptions>
where TOptions : class
{
private readonly IOptionsFactory<TOptions> _factory;
private volatile object _syncObj;
private volatile TOptions _value;
public UnnamedOptionsManager(IOptionsFactory<TOptions> factory) => _factory = factory;
public TOptions Value
{
get
{
if (_value is TOptions value)
{
return value;
}
lock (_syncObj ?? Interlocked.CompareExchange(ref _syncObj, new object(), null) ?? _syncObj)
{
return _value ??= _factory.Create(Options.DefaultName);
}
}
}
}
IOptions
IOptionsSnapshot、OptionsManager
IOptionsSnapshot
点击查看代码 OptionsManager
public class OptionsManager<[DynamicallyAccessedMembers(Options.DynamicallyAccessedMembers)] TOptions> :
IOptions<TOptions>,
IOptionsSnapshot<TOptions>
where TOptions : class
{
private readonly IOptionsFactory<TOptions> _factory;
private readonly OptionsCache<TOptions> _cache = new OptionsCache<TOptions>(); // Note: this is a private cache
/// <summary>
/// Initializes a new instance with the specified options configurations.
/// </summary>
/// <param name="factory">The factory to use to create options.</param>
public OptionsManager(IOptionsFactory<TOptions> factory)
{
_factory = factory;
}
/// <summary>
/// The default configured <typeparamref name="TOptions"/> instance, equivalent to Get(Options.DefaultName).
/// </summary>
public TOptions Value => Get(Options.DefaultName);
/// <summary>
/// Returns a configured <typeparamref name="TOptions"/> instance with the given <paramref name="name"/>.
/// </summary>
public virtual TOptions Get(string name)
{
name = name ?? Options.DefaultName;
if (!_cache.TryGetValue(name, out TOptions options))
{
// Store the options in our instance cache. Avoid closure on fast path by storing state into scoped locals.
IOptionsFactory<TOptions> localFactory = _factory;
string localName = name;
options = _cache.GetOrAdd(name, () => localFactory.Create(localName));
}
return options;
}
}
IOptionsMonitor、OptionsMonitor
IOptionsMonitor
点击查看代码 OptionsMonitor
public class OptionsMonitor<[DynamicallyAccessedMembers(Options.DynamicallyAccessedMembers)] TOptions> :
IOptionsMonitor<TOptions>,
IDisposable
where TOptions : class
{
private readonly IOptionsMonitorCache<TOptions> _cache;
private readonly IOptionsFactory<TOptions> _factory;
private readonly List<IDisposable> _registrations = new List<IDisposable>();
internal event Action<TOptions, string> _onChange;
/// <summary>
/// Constructor.
/// </summary>
/// <param name="factory">The factory to use to create options.</param>
/// <param name="sources">The sources used to listen for changes to the options instance.</param>
/// <param name="cache">The cache used to store options.</param>
public OptionsMonitor(IOptionsFactory<TOptions> factory, IEnumerable<IOptionsChangeTokenSource<TOptions>> sources, IOptionsMonitorCache<TOptions> cache)
{
_factory = factory;
_cache = cache;
void RegisterSource(IOptionsChangeTokenSource<TOptions> source)
{
IDisposable registration = ChangeToken.OnChange(
() => source.GetChangeToken(),
(name) => InvokeChanged(name),
source.Name);
_registrations.Add(registration);
}
// The default DI container uses arrays under the covers. Take advantage of this knowledge
// by checking for an array and enumerate over that, so we don't need to allocate an enumerator.
if (sources is IOptionsChangeTokenSource<TOptions>[] sourcesArray)
{
foreach (IOptionsChangeTokenSource<TOptions> source in sourcesArray)
{
RegisterSource(source);
}
}
else
{
foreach (IOptionsChangeTokenSource<TOptions> source in sources)
{
RegisterSource(source);
}
}
}
private void InvokeChanged(string name)
{
name = name ?? Options.DefaultName;
_cache.TryRemove(name);
TOptions options = Get(name);
if (_onChange != null)
{
_onChange.Invoke(options, name);
}
}
/// <summary>
/// The present value of the options.
/// </summary>
public TOptions CurrentValue
{
get => Get(Options.DefaultName);
}
/// <summary>
/// Returns a configured <typeparamref name="TOptions"/> instance with the given <paramref name="name"/>.
/// </summary>
public virtual TOptions Get(string name)
{
name = name ?? Options.DefaultName;
return _cache.GetOrAdd(name, () => _factory.Create(name));
}
/// <summary>
/// Registers a listener to be called whenever <typeparamref name="TOptions"/> changes.
/// </summary>
/// <param name="listener">The action to be invoked when <typeparamref name="TOptions"/> has changed.</param>
/// <returns>An <see cref="IDisposable"/> which should be disposed to stop listening for changes.</returns>
public IDisposable OnChange(Action<TOptions, string> listener)
{
var disposable = new ChangeTrackerDisposable(this, listener);
_onChange += disposable.OnChange;
return disposable;
}
/// <summary>
/// Removes all change registration subscriptions.
/// </summary>
public void Dispose()
{
// Remove all subscriptions to the change tokens
foreach (IDisposable registration in _registrations)
{
registration.Dispose();
}
_registrations.Clear();
}
internal sealed class ChangeTrackerDisposable : IDisposable
{
private readonly Action<TOptions, string> _listener;
private readonly OptionsMonitor<TOptions> _monitor;
public ChangeTrackerDisposable(OptionsMonitor<TOptions> monitor, Action<TOptions, string> listener)
{
_listener = listener;
_monitor = monitor;
}
public void OnChange(TOptions options, string name) => _listener.Invoke(options, name);
public void Dispose() => _monitor._onChange -= OnChange;
}
}
OnChange 方法中传入的委托本来可以可以直接追加到事件中的，这里将其再包装多一层，是为了 OptionsMonitor 对象销毁的时候能够将相应的事件释放，如果不包装多一层的话，委托只在方法作用域中，对象释放的时候是获取不到的。
IOptionsMonitorCache、OptionsCache
OptionsCache 是 IOptionsMonitorCache 接口的的实现类，从上面可以看到 OptionsMonitor
OptionsCache 的具体实现比较简单，主要就是通过 ConcurrentDictionary<string, Lazy
IOptionsFactory、OptionsFactory
OptionsFactory
点击查看代码 OptionsFactory
public class OptionsFactory<[DynamicallyAccessedMembers(Options.DynamicallyAccessedMembers)] TOptions> :
IOptionsFactory<TOptions>
where TOptions : class
{
private readonly IConfigureOptions<TOptions>[] _setups;
private readonly IPostConfigureOptions<TOptions>[] _postConfigures;
private readonly IValidateOptions<TOptions>[] _validations;
/// <summary>
/// Initializes a new instance with the specified options configurations.
/// </summary>
/// <param name="setups">The configuration actions to run.</param>
/// <param name="postConfigures">The initialization actions to run.</param>
public OptionsFactory(IEnumerable<IConfigureOptions<TOptions>> setups, IEnumerable<IPostConfigureOptions<TOptions>> postConfigures) : this(setups, postConfigures, validations: Array.Empty<IValidateOptions<TOptions>>())
{ }
/// <summary>
/// Initializes a new instance with the specified options configurations.
/// </summary>
/// <param name="setups">The configuration actions to run.</param>
/// <param name="postConfigures">The initialization actions to run.</param>
/// <param name="validations">The validations to run.</param>
public OptionsFactory(IEnumerable<IConfigureOptions<TOptions>> setups, IEnumerable<IPostConfigureOptions<TOptions>> postConfigures, IEnumerable<IValidateOptions<TOptions>> validations)
{
// The default DI container uses arrays under the covers. Take advantage of this knowledge
// by checking for an array and enumerate over that, so we don't need to allocate an enumerator.
// When it isn't already an array, convert it to one, but don't use System.Linq to avoid pulling Linq in to
// small trimmed applications.
_setups = setups as IConfigureOptions<TOptions>[] ?? new List<IConfigureOptions<TOptions>>(setups).ToArray();
_postConfigures = postConfigures as IPostConfigureOptions<TOptions>[] ?? new List<IPostConfigureOptions<TOptions>>(postConfigures).ToArray();
_validations = validations as IValidateOptions<TOptions>[] ?? new List<IValidateOptions<TOptions>>(validations).ToArray();
}
/// <summary>
/// Returns a configured <typeparamref name="TOptions"/> instance with the given <paramref name="name"/>.
/// </summary>
public TOptions Create(string name)
{
TOptions options = CreateInstance(name);
foreach (IConfigureOptions<TOptions> setup in _setups)
{
if (setup is IConfigureNamedOptions<TOptions> namedSetup)
{
namedSetup.Configure(name, options);
}
else if (name == Options.DefaultName)
{
setup.Configure(options);
}
}
foreach (IPostConfigureOptions<TOptions> post in _postConfigures)
{
post.PostConfigure(name, options);
}
if (_validations != null)
{
var failures = new List<string>();
foreach (IValidateOptions<TOptions> validate in _validations)
{
ValidateOptionsResult result = validate.Validate(name, options);
if (result is not null && result.Failed)
{
failures.AddRange(result.Failures);
}
}
if (failures.Count > 0)
{
throw new OptionsValidationException(name, typeof(TOptions), failures);
}
}
return options;
}
/// <summary>
/// Creates a new instance of options type
/// </summary>
protected virtual TOptions CreateInstance(string name)
{
return Activator.CreateInstance<TOptions>();
}
}
以上就是 .NET Core 下的选项系统，由于选项系统的源码不多，这里也就将大部分类都拿出来讲了一下，相当于把这个框架的流程思路都讲了一遍，不知不觉写得字数又很多了，希望有童鞋能够耐心地看到这里。
参考文章：
ASP.NET Core 中的选项模式 | Microsoft Learn
选项模式 - .NET | Microsoft Learn
面向 .NET 库创建者的选项模式指南 - .NET | Microsoft Learn
理解ASP.NET Core - 选项(Options)
ASP.NET Core 系列：
目录：ASP.NET Core 系列总结
上一篇：ASP.NET Core - 选项系统之选项验证
下一篇：ASP.NET Core - 缓存之内存缓存(上)
